watchdog: stm32_iwdg: Add pretimeout support
Subsystems (2)
PATCH v4 1/1 watchdog: stm32_iwdg: Add pretimeout support
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
---
Cc: Alexandre Torgue <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Subtract the pretimeout value from timeout value before writing it
into the IWDG pretimeout register, because the watchdog counter register is counting down, and the pretimeout interrupt triggers when watchdog counter register matches the pretimeout register content.
- Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead of pdev->dev
- Swap order of ret/return 0
- Split this from the DT changes, which are orthogonal
- Uh, this patch got stuck in upstreaming queue, sorry
V4: - Update commit message to match V2 default pretimeout to 3/4
- Add RB/TB from Clément
--- drivers/watchdog/stm32_iwdg.c | 95 ++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 1 deletion(-)
drivers/watchdog/stm32_iwdg.c +94 -1
@@ -18,6 +18,7 @@#include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> #include <linux/watchdog.h> #define DEFAULT_TIMEOUT 10
@@ -28,6 +29,7 @@#define IWDG_RLR 0x08/* ReLoad Register */ #define IWDG_SR 0x0C/* Status Register */ #define IWDG_WINR 0x10/* Windows Register */ +#define IWDG_EWCR 0x14/* Early Wake-up Register */ /* IWDG_KR register bit mask */ #define KR_KEY_RELOAD 0xAAAA/* reload counter enable */
@@ -47,22 +49,29 @@#define SR_PVU BIT(0)/* Watchdog prescaler value update */ #define SR_RVU BIT(1)/* Watchdog counter reload value update */ +#define EWCR_EWIT GENMASK(11, 0)/* Watchdog counter window value */ +#define EWCR_EWIC BIT(14)/* Watchdog early interrupt acknowledge */ +#define EWCR_EWIE BIT(15)/* Watchdog early interrupt enable */ +/* set timeout to 100000 us */ #define TIMEOUT_US 100000#define SLEEP_US 1000struct stm32_iwdg_data {bool has_pclk; +bool has_early_wakeup;u32 max_prescaler; };static const struct stm32_iwdg_data stm32_iwdg_data = { .has_pclk = false, + .has_early_wakeup = false, .max_prescaler =256 , };static const struct stm32_iwdg_data stm32mp1_iwdg_data = { .has_pclk = true, + .has_early_wakeup = true, .max_prescaler =1024 , };
@@ -88,13 +97,18 @@ static inline void reg_write(void __iomem *base, u32 reg, u32 val)static int stm32_iwdg_start (struct watchdog_device *wdd) {struct stm32_iwdg *wdt =watchdog_get_drvdata (wdd); -u32 tout, presc, iwdg_rlr, iwdg_pr, iwdg_sr; +u32 tout, ptot, presc, iwdg_rlr, iwdg_ewcr, iwdg_pr, iwdg_sr;int ret;dev_dbg (wdd->parent,"%s\n" , __func__); +if (!wdd->pretimeout) + wdd->pretimeout =3 * wdd->timeout /4 ; + tout = clamp_t(unsigned int, wdd->timeout, wdd->min_timeout, wdd->max_hw_heartbeat_ms /1000 ); + ptot = clamp_t(unsigned int, tout - wdd->pretimeout, + wdd->min_timeout, tout); presc =DIV_ROUND_UP (tout * wdt->rate,RLR_MAX +1 );
@@ -102,6 +116,7 @@ static int stm32_iwdg_start(struct watchdog_device *wdd) presc =roundup_pow_of_two (presc); iwdg_pr = presc <=1 <<PR_SHIFT ?0 :ilog2 (presc) -PR_SHIFT ; iwdg_rlr = ((tout * wdt->rate) / presc) -1 ; + iwdg_ewcr = ((ptot * wdt->rate) / presc) -1 ;/* enable write access */ reg_write (wdt->regs,IWDG_KR ,KR_KEY_EWA );
@@ -109,6 +124,8 @@ static int stm32_iwdg_start(struct watchdog_device *wdd)/* set prescaler & reload registers */ reg_write (wdt->regs,IWDG_PR , iwdg_pr);reg_write (wdt->regs,IWDG_RLR , iwdg_rlr); +if (wdt->data->has_early_wakeup) +reg_write (wdt->regs,IWDG_EWCR , iwdg_ewcr |EWCR_EWIE );reg_write (wdt->regs,IWDG_KR ,KR_KEY_ENABLE );/* wait for the registers to be updated (max 100ms) */
@@ -151,6 +168,34 @@ static int stm32_iwdg_set_timeout(struct watchdog_device *wdd,return 0 ; } +static int stm32_iwdg_set_pretimeout (struct watchdog_device *wdd, +unsigned int pretimeout) +{ +dev_dbg (wdd->parent,"%s pretimeout: %d sec\n" , __func__, pretimeout); + + wdd->pretimeout = pretimeout; + +if (watchdog_active (wdd)) +return stm32_iwdg_start (wdd); + +return 0 ; +} + +static irqreturn_t stm32_iwdg_isr (int irq,void *wdog_arg) +{ +struct watchdog_device *wdd = wdog_arg; +struct stm32_iwdg *wdt =watchdog_get_drvdata (wdd); +u32 reg; + + reg =reg_read (wdt->regs,IWDG_EWCR ); + reg |=EWCR_EWIC ; +reg_write (wdt->regs,IWDG_EWCR , reg); + +watchdog_notify_pretimeout (wdd); + +return IRQ_HANDLED ; +} +static void stm32_clk_disable_unprepare (void *data) {clk_disable_unprepare (data);
@@ -207,11 +252,20 @@ static const struct watchdog_info stm32_iwdg_info = { .identity = "STM32 Independent Watchdog", }; +static const struct watchdog_info stm32_iwdg_preinfo = { + .options =WDIOF_SETTIMEOUT | +WDIOF_MAGICCLOSE | +WDIOF_KEEPALIVEPING | +WDIOF_PRETIMEOUT , + .identity ="STM32 Independent Watchdog" , +}; +static const struct watchdog_ops stm32_iwdg_ops = { .owner =THIS_MODULE , .start = stm32_iwdg_start, .ping = stm32_iwdg_ping, .set_timeout = stm32_iwdg_set_timeout, + .set_pretimeout = stm32_iwdg_set_pretimeout, };static const struct of_device_id stm32_iwdg_of_match[] = {
@@ -221,6 +275,40 @@ static const struct of_device_id stm32_iwdg_of_match[] = { };MODULE_DEVICE_TABLE (of, stm32_iwdg_of_match); +static int stm32_iwdg_irq_init (struct platform_device *pdev, +struct stm32_iwdg *wdt) +{ +struct device_node *np = pdev->dev.of_node; +struct watchdog_device *wdd = &wdt->wdd; +struct device *dev = &pdev->dev; +int irq, ret; + +if (!wdt->data->has_early_wakeup) +return 0 ; + + irq =platform_get_irq (pdev,0 ); +if (irq <=0 ) +return 0 ; + +if (of_property_read_bool (np,"wakeup-source" )) { + ret =device_init_wakeup (dev, true); +if (ret) +return ret; + + ret =dev_pm_set_wake_irq (dev, irq); +if (ret) +return ret; + } + + ret =devm_request_irq (dev, irq, stm32_iwdg_isr,0 , +dev_name (dev), wdd); +if (ret) +return ret; + + wdd->info = &stm32_iwdg_preinfo; +return 0 ; +} +static int stm32_iwdg_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;
@@ -255,6 +343,11 @@ static int stm32_iwdg_probe(struct platform_device *pdev) wdd->max_hw_heartbeat_ms = ((RLR_MAX +1 ) * wdt->data->max_prescaler *1000 ) / wdt->rate; +/* Initialize IRQ, this might override wdd->info, hence it is here. */ + ret =stm32_iwdg_irq_init (pdev, wdt); +if (ret) +return ret; +watchdog_set_drvdata (wdd, wdt);watchdog_set_nowayout (wdd,WATCHDOG_NOWAYOUT );watchdog_init_timeout (wdd,0 , dev);
Signature · 1 line
2.43.0
Quoted 22 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>---
Cc: Alexandre Torgue <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Subtract the pretimeout value from timeout value before writing it
into the IWDG pretimeout register, because the watchdog counter register is counting down, and the pretimeout interrupt triggers when watchdog counter register matches the pretimeout register
Quoted 8 lines
content.
- Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead ofpdev->dev
- Swap order of ret/return 0
- Split this from the DT changes, which are orthogonal
- Uh, this patch got stuck in upstreaming queue, sorry
V4: - Update commit message to match V2 default pretimeout to 3/4
- Add RB/TB from Clément
Hi,
Are there still any open topics with this patch ?
Quoted 32 lines · Marek Vasut
Quoted 22 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>---
Cc: Alexandre Torgue <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Subtract the pretimeout value from timeout value before writing it into the IWDG pretimeout register, because the watchdog counter register is counting down, and the pretimeout interrupt triggers when watchdog counter register matches the pretimeout registerQuoted 8 lines
content.
- Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead ofpdev->dev
- Swap order of ret/return 0
- Split this from the DT changes, which are orthogonal
- Uh, this patch got stuck in upstreaming queue, sorry
V4: - Update commit message to match V2 default pretimeout to 3/4
- Add RB/TB from Clément
Quoted 3 lines
Hi,
Are there still any open topics with this patch ?
Anything ?
Quoted 33 lines · Marek Vasut
Quoted 32 lines · Marek Vasut
Quoted 30 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>---
Cc: Alexandre Torgue <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Subtract the pretimeout value from timeout value before writing it into the IWDG pretimeout register, because the watchdog counter register is counting down, and the pretimeout interrupt triggers when watchdog counter register matches the pretimeout register content.
- Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead ofpdev->dev
- Swap order of ret/return 0
- Split this from the DT changes, which are orthogonal
- Uh, this patch got stuck in upstreaming queue, sorry
V4: - Update commit message to match V2 default pretimeout to 3/4
- Add RB/TB from Clément
Quoted 5 lines
Quoted 3 lines
Hi,
Are there still any open topics with this patch ?
Anything ?
Can this be pulled via the stm32 SoC tree ?
Quoted 9 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>
Quoted 7 lines · Guenter Roeck
Quoted 6 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Quoted 5 lines
Quoted 3 lines
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>Reviewed-by Guenter Roeck <[email protected]>
Thank you
Quoted 38 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>---
Cc: Alexandre Torgue <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Subtract the pretimeout value from timeout value before writing it
into the IWDG pretimeout register, because the watchdog counter register is counting down, and the pretimeout interrupt triggers when watchdog counter register matches the pretimeout register content.
- Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead ofpdev->dev
- Swap order of ret/return 0
- Split this from the DT changes, which are orthogonal
- Uh, this patch got stuck in upstreaming queue, sorry
V4: - Update commit message to match V2 default pretimeout to 3/4
- Add RB/TB from Clément--- drivers/watchdog/stm32_iwdg.c | 95 ++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 1 deletion(-)drivers/watchdog/stm32_iwdg.c +0
-0
drivers/watchdog/stm32_iwdg.c static const struct of_device_id stm32_iwdg_of_match[] = { · line 291
Quoted 7 lines
drivers/watchdog/stm32_iwdg.c +4
-0+ + irq =platform_get_irq (pdev,0 ); +if (irq <=0 ) +return 0 ;
Hi Marek,
After re-evaluating this patch, it seems it lacks of a dt-bindings update that tackles the 'interrupts' property you are adding.
That said, the interrupt line should not be mandatory for the driver to probe. For backward compatibility with existing DT, I recommend to use the 'platform_get_irq_optional()' API to not fail during the probe of the driver.
Best regards,
Clément
Quoted 49 lines · Clement LE GOFFIC
Quoted 38 lines · Marek Vasut
The STM32MP15xx IWDG adds registers which permit this IP to generate pretimeout interrupt. This interrupt can also be used to wake the CPU from suspend. Implement support for generating this interrupt and let userspace configure the pretimeout. In case the pretimeout is not configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Reviewed-by Clément Le Goffic <[email protected]>Tested-by Clément Le Goffic <[email protected]>Signed-off-by Marek Vasut <[email protected]>---
Cc: Alexandre Torgue <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Subtract the pretimeout value from timeout value before writing it into the IWDG pretimeout register, because the watchdog counter register is counting down, and the pretimeout interrupt triggers when watchdog counter register matches the pretimeout register content.
- Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead ofpdev->dev
- Swap order of ret/return 0
- Split this from the DT changes, which are orthogonal
- Uh, this patch got stuck in upstreaming queue, sorry
V4: - Update commit message to match V2 default pretimeout to 3/4
- Add RB/TB from Clément
---
drivers/watchdog/stm32_iwdg.c| 95 ++++++++++++++++++++++++++++++++++-1 file changed, 94 insertions(+), 1 deletion(-)drivers/watchdog/stm32_iwdg.c +0
-0drivers/watchdog/stm32_iwdg.c static const struct of_device_id stm32_iwdg_of_match[] = { · line 291
Quoted 7 lines
drivers/watchdog/stm32_iwdg.c +4
-0+ + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return 0;Hi Marek,
Quoted 3 lines
After re-evaluating this patch, it seems it lacks of a dt-bindings update that tackles the 'interrupts' property you are adding.
That said, the interrupt line should not be mandatory for the driver to probe. For backward compatibility with existing DT, I recommend to use the '
platform_get_irq_optional()' API to not fail during the probe of the driver.
I saw the fix
[PATCH] watchdog: stm32_iwdg: fix DT backward compatibility Thank you for that. I'll wait for V2 with updated commit message .
As far as I understood the problem, the goal is to remove error message printed by the platform_get_irq() in case the DT interrupt property is missing, but this is only an esthetic fix, not a functional one, because the driver probes even if the interrupts DT property is missing, it only prints the error message while at it, correct ?