Skip to contentSkip to conversation

sunxi: Add support for using UART4 as console on A64

PATCH New Nazım Gediz Aydındoğmuş 2 participants 4 messages Jun 29, 2020 – Jul 2, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sunxi: Add support for using UART4 as console on A64

A64 has UART4 but it was in conflict with R_UART of older SoCs (e.g. A23).

This commit adds necessary definitions and checks to use UART4 port on A64.

---

 arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
 arch/arm/mach-sunxi/board.c            | 4 ++++
 arch/arm/mach-sunxi/clock_sun6i.c      | 3 ++-
 include/configs/sunxi-common.h         | 6 ++++++
 4 files changed, 13 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/gpio.h +1 -0
index a646ea6a3c..1407aff25f 100644
@@ -176,6 +176,7 @@ enum sunxi_gpio_number {
 #define SUNXI_GPD_LCD0		2
 #define SUNXI_GPD_LVDS0		3
 #define SUNXI_GPD_PWM		2
+#define SUN50I_GPD_UART4	3
 
 #define SUN5I_GPE_SDC2		3
 #define SUN8I_GPE_TWI2		3
arch/arm/mach-sunxi/board.c +4 -0
index f40fccd8f8..7d95b7dd29 100644
@@ -140,6 +140,10 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(2), SUN50I_GPD_UART4);
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(3), SUN50I_GPD_UART4);
+	sunxi_gpio_set_pull(SUNXI_GPD(3), SUNXI_GPIO_PULL_UP);
 #else
 #error Unsupported console port number. Please fix pin mux settings in board.c
 #endif
arch/arm/mach-sunxi/clock_sun6i.c +2 -1
index 8e84062bd7..4bb2d66b1e 100644
@@ -83,7 +83,8 @@ void clock_init_sec(void)
 
 void clock_init_uart(void)
 {
-#if CONFIG_CONS_INDEX < 5
+#if CONFIG_CONS_INDEX < 5 || \
+      defined(CONFIG_MACH_SUN50I) && CONFIG_CONS_INDEX < 6
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
include/configs/sunxi-common.h +6 -0
index 5b0bec0561..f7a97b3dec 100644
@@ -45,8 +45,12 @@
 # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
 # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
 # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
+#if defined(CONFIG_MACH_SUN50I)
+# define CONFIG_SYS_NS16550_COM5		SUNXI_UART4_BASE
+#else
 # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
 #endif
+#endif
 
 /* CPU */
 #define COUNTER_FREQUENCY		24000000
@@ -248,6 +252,8 @@ extern int soft_i2c_gpio_scl;
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c28800:115200"
 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01f02800:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+#define OF_STDOUT_PATH		"/soc at 01c00000/serial@01c29000:115200"
 #else
 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 #endif
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 sunxi: Add support for using UART4 as console on A64

Hi,

Quoted 72 lines · Naz?m Gediz Ayd?ndo?mu?

A64 has UART4 but it was in conflict with R_UART of older SoCs (e.g. A23).

This commit adds necessary definitions and checks to use UART4 port on A64.

---

 arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
 arch/arm/mach-sunxi/board.c            | 4 ++++
 arch/arm/mach-sunxi/clock_sun6i.c      | 3 ++-
 include/configs/sunxi-common.h         | 6 ++++++
 4 files changed, 13 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/gpio.h +1 -0
index a646ea6a3c..1407aff25f 100644
@@ -176,6 +176,7 @@ enum sunxi_gpio_number {
 #define SUNXI_GPD_LCD0		2
 #define SUNXI_GPD_LVDS0		3
 #define SUNXI_GPD_PWM		2
+#define SUN50I_GPD_UART4	3
 
 #define SUN5I_GPE_SDC2		3
 #define SUN8I_GPE_TWI2		3
arch/arm/mach-sunxi/board.c +4 -0
index f40fccd8f8..7d95b7dd29 100644
@@ -140,6 +140,10 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(2), SUN50I_GPD_UART4);
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(3), SUN50I_GPD_UART4);
+	sunxi_gpio_set_pull(SUNXI_GPD(3), SUNXI_GPIO_PULL_UP);
 #else
 #error Unsupported console port number. Please fix pin mux settings in board.c
 #endif
arch/arm/mach-sunxi/clock_sun6i.c +2 -1
index 8e84062bd7..4bb2d66b1e 100644
@@ -83,7 +83,8 @@ void clock_init_sec(void)
 
 void clock_init_uart(void)
 {
-#if CONFIG_CONS_INDEX < 5
+#if CONFIG_CONS_INDEX < 5 || \
+      defined(CONFIG_MACH_SUN50I) && CONFIG_CONS_INDEX < 6
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
include/configs/sunxi-common.h +4 -0
index 5b0bec0561..f7a97b3dec 100644
@@ -45,8 +45,12 @@
 # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
 # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
 # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
+#if defined(CONFIG_MACH_SUN50I)
+# define CONFIG_SYS_NS16550_COM5		SUNXI_UART4_BASE
+#else
 # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
 #endif
+#endif
 
 /* CPU */
 #define COUNTER_FREQUENCY		24000000

include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 256

Quoted 5 lines
include/configs/sunxi-common.h +2 -0
@@ -248,6 +252,8 @@ extern int soft_i2c_gpio_scl;
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c28800:115200"
 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01f02800:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+#define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c29000:115200"

The soc node doesn't have a unit-address on the A64
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200629/800cfc76/attachment.sig>

#2 lore raw

PATCH 1/1 sunxi: Add support for using UART4 as console on A64

Hi.

If I've understood it well, you're pointing out for the following part, right?

include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 256

Quoted 8 lines

/* CPU */
#define COUNTER_FREQUENCY 24000000

include/configs/sunxi-common.h +2 -0
@@ -248,6 +252,8 @@ extern int soft_i2c_gpio_scl;
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c28800:115200"
 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01f02800:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+#define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c29000:115200"

To be honest, this part was remnant of days long trial and error attempts at trying to make UART4 work.
Sorry for not scrutinizing it carefully. It was not because do not taking it serious but due to not fully grasping the said changes.

If there's not any other thing to remove/add/fix, should I reformat and submit a completely new patch or is it okay to send the updated one as a follow-up post in this thread?

Thanks for the review, by the way.

Quoted 84 lines · Maxime Ripard
(quoted diff) +0 -0
 Hi,
 
Quoted 72 lines · Naz?m Gediz Ayd?ndo?mu?

A64 has UART4 but it was in conflict with R_UART of older SoCs (e.g. A23).

This commit adds necessary definitions and checks to use UART4 port on A64.

---

 arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
 arch/arm/mach-sunxi/board.c            | 4 ++++
 arch/arm/mach-sunxi/clock_sun6i.c      | 3 ++-
 include/configs/sunxi-common.h         | 6 ++++++
 4 files changed, 13 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-sunxi/gpio.h +1 -0
index a646ea6a3c..1407aff25f 100644
@@ -176,6 +176,7 @@ enum sunxi_gpio_number {
 #define SUNXI_GPD_LCD0		2
 #define SUNXI_GPD_LVDS0		3
 #define SUNXI_GPD_PWM		2
+#define SUN50I_GPD_UART4	3
 
 #define SUN5I_GPE_SDC2		3
 #define SUN8I_GPE_TWI2		3
arch/arm/mach-sunxi/board.c +4 -0
index f40fccd8f8..7d95b7dd29 100644
@@ -140,6 +140,10 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(2), SUN50I_GPD_UART4);
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(3), SUN50I_GPD_UART4);
+	sunxi_gpio_set_pull(SUNXI_GPD(3), SUNXI_GPIO_PULL_UP);
 #else
 #error Unsupported console port number. Please fix pin mux settings in board.c
 #endif
arch/arm/mach-sunxi/clock_sun6i.c +2 -1
index 8e84062bd7..4bb2d66b1e 100644
@@ -83,7 +83,8 @@ void clock_init_sec(void)
 
 void clock_init_uart(void)
 {
-#if CONFIG_CONS_INDEX < 5
+#if CONFIG_CONS_INDEX < 5 || \
+      defined(CONFIG_MACH_SUN50I) && CONFIG_CONS_INDEX < 6
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
include/configs/sunxi-common.h +4 -0
index 5b0bec0561..f7a97b3dec 100644
@@ -45,8 +45,12 @@
 # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
 # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
 # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
+#if defined(CONFIG_MACH_SUN50I)
+# define CONFIG_SYS_NS16550_COM5		SUNXI_UART4_BASE
+#else
 # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
 #endif
+#endif
 
 /* CPU */
 #define COUNTER_FREQUENCY		24000000

include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 256

Quoted 5 lines
include/configs/sunxi-common.h +2 -0
@@ -248,6 +252,8 @@ extern int soft_i2c_gpio_scl;
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c28800:115200"
 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01f02800:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+#define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c29000:115200"

The soc node doesn't have a unit-address on the A64 Maxime

#3 lore raw

PATCH 1/1 sunxi: Add support for using UART4 as console on A64

Hi,

Quoted 4 lines · Naz?m Gediz AYDINDO?MU?

Hi.

If I've understood it well, you're pointing out for the following part, right?

Yep

Quoted 14 lines

include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 256

Quoted 8 lines

/* CPU */
#define COUNTER_FREQUENCY 24000000

include/configs/sunxi-common.h +2 -0
@@ -248,6 +252,8 @@ extern int soft_i2c_gpio_scl;
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c28800:115200"
 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 #define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01f02800:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+#define OF_STDOUT_PATH		"/soc at 01c00000/serial at 01c29000:115200"

To be honest, this part was remnant of days long trial and error attempts at trying to make UART4 work.
Sorry for not scrutinizing it carefully. It was not because do not taking it serious but due to not fully grasping the said changes.

Quoted 3 lines

If there's not any other thing to remove/add/fix, should I reformat and submit a completely new patch or is it okay to send the updated one as a follow-up post in this thread?

Yeah, send a new version.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200702/f2b8621b/attachment.sig>