doc: Document station Affinities property
PATCH v2 1/8 doc: Document station Affinities property
This documents new DBus property that expose a bit more control to how IWD roams.
Setting the affinity on the connected BSS effectively "locks" IWD to that BSS (except at critical RSSI levels, explained below). This can be useful for clients that have access to more information about the environment than IWD. For example, if a client is stationary there is likely no point in trying to roam until it has moved elsewhere.
A new main.conf option would also be added:
[General].CriticalRoamThreshold
This would be the new roam threshold set if the currently connected BSS is in the Affinities list. If the RSSI continues to drop below this level IWD will still attempt to roam.
--- doc/station-api.txt | 17 +++++++++++++++++ src/iwd.config.rst | 16 ++++++++++++++++ 2 files changed, 33 insertions(+)
doc/station-api.txt +17 -0
@@ -170,6 +170,23 @@ Properties string State [readonly] BSS the device is currently connected to or to which a connection is in progress. + ao Affinities [optional] [experimental] + + Array of net.connman.iwd.BasicServiceSet object paths + that will be treated with higher affinity compared to + other BSS's. Currently the only allowed value to be + set in this array is the path to the currently connected + BasicServiceSet object, i.e. + Station.ConnectedAccessPoint. + + Setting the affinity will lower the roaming threshold, + effectively locking IWD to the current BSS unless the + RSSI drops below the critical threshold set by + [General].CriticalRoamThreshold{_5GHz} at which point + IWD will proceed with normal roaming behavior. + + This property is cleared on roams/disconnections. + SignalLevelAgent hierarchy ==========================
src/iwd.config.rst +16 -0
@@ -130,6 +130,22 @@ The group ``[General]`` contains general settings. This value can be used to control how aggressively **iwd** roams when connected to a 5GHz access point. + * - CriticalRoamThreshold + - Value: rssi dBm value, from -100 to 1, default: **-80** + + The threshold (for 2.4GHz) at which IWD will roam regardless of the + affinity set to the current BSS. If the connected BSS has affinity + (set in Station's Affinities list) the roam threshold will be lowed to + this value and IWD will not attempt to roam (or roam scan) until either + the affinity is cleared, or the signal drops below this threshold. + + + * - CriticalRoamThreshold5G + - Value: rssi dBm value, from -100 to 1, default: **-82** + + This has the same effect as ``CriticalRoamThreshold``, but for the 5GHz + band. + * - RoamRetryInterval - Value: unsigned int value in seconds (default: **60**)
Signature · 1 line
2.34.1
PATCH v2 2/8 netdev: store signal threshold in netdev object, not globally
This prepares for the ability to toggle between two signal thresholds in netdev. Since each netdev may not need/want the same threshold store it in the netdev object rather than globally.
--- src/netdev.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
src/netdev.c +14 -8
@@ -172,6 +172,9 @@ struct netdev {struct netdev_ext_key_info *ext_key_info; +int low_signal_threshold; +int low_signal_threshold_5ghz; + bool connected : 1; bool associated : 1; bool operational : 1;
@@ -206,6 +209,9 @@ static struct l_genl_family *nl80211;static struct l_queue *netdev_list;static struct watchlist netdev_watches;static bool mac_per_ssid; +/* Threshold RSSI for roaming to trigger, configurable in main.conf */ +static int LOW_SIGNAL_THRESHOLD ; +static int LOW_SIGNAL_THRESHOLD_5GHZ ; static unsigned int iov_ie_append(struct iovec *iov, unsigned int n_iov, unsigned int c,
@@ -1058,10 +1064,6 @@ struct netdev *netdev_find(int ifindex)return l_queue_find (netdev_list, netdev_match,L_UINT_TO_PTR (ifindex)); } -/* Threshold RSSI for roaming to trigger, configurable in main.conf */ -static int LOW_SIGNAL_THRESHOLD ; -static int LOW_SIGNAL_THRESHOLD_5GHZ ; -static void netdev_cqm_event_rssi_threshold (struct netdev *netdev,uint32_t rssi_event) {
@@ -1089,8 +1091,9 @@ static void netdev_cqm_event_rssi_value(struct netdev *netdev, int rssi_val) {bool new_rssi_low;uint8_t prev_rssi_level_idx = netdev->cur_rssi_level_idx; -int threshold = netdev->frequency >4000 ?LOW_SIGNAL_THRESHOLD_5GHZ : -LOW_SIGNAL_THRESHOLD ; +int threshold = netdev->frequency >4000 ? + netdev->low_signal_threshold_5ghz : + netdev->low_signal_threshold;if (!netdev->connected)return ;
@@ -3585,8 +3588,9 @@ static struct l_genl_msg *netdev_build_cmd_cqm_rssi_update(uint32_t hyst =5 ;int thold_count;int32_t thold_list[levels_num +2 ]; -int threshold = netdev->frequency >4000 ?LOW_SIGNAL_THRESHOLD_5GHZ : -LOW_SIGNAL_THRESHOLD ; +int threshold = netdev->frequency >4000 ? + netdev->low_signal_threshold_5ghz : + netdev->low_signal_threshold;if (levels_num ==0 ) { thold_list[0 ] = threshold;
@@ -6163,6 +6167,8 @@ struct netdev *netdev_create_from_genl(struct l_genl_msg *msg,l_strlcpy (netdev->name, ifname,IFNAMSIZ ); netdev->wiphy = wiphy; netdev->pae_over_nl80211 = pae_io ==NULL ; + netdev->low_signal_threshold =LOW_SIGNAL_THRESHOLD ; + netdev->low_signal_threshold_5ghz =LOW_SIGNAL_THRESHOLD_5GHZ ;if (set_mac)memcpy (netdev->set_mac_once, set_mac,6 );
Signature · 1 line
2.34.1
PATCH v2 3/8 netdev: add critical signal threshold level
In reply to James PrestwoodThis adds a secondary set of signal thresholds. The purpose of these are to provide more flexibility in how IWD roams. The critical threshold is intended to be temporary and is automatically reset upon any connection changes: disconnects, roams, or new connections.
--- src/netdev.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ src/netdev.h | 2 ++ 2 files changed, 53 insertions(+)
src/netdev.c +51 -0
@@ -212,6 +212,8 @@ static bool mac_per_ssid;/* Threshold RSSI for roaming to trigger, configurable in main.conf */ static int LOW_SIGNAL_THRESHOLD ;static int LOW_SIGNAL_THRESHOLD_5GHZ ; +static int CRITICAL_SIGNAL_THRESHOLD ; +static int CRITICAL_SIGNAL_THRESHOLD_5GHZ ; static unsigned int iov_ie_append(struct iovec *iov, unsigned int n_iov, unsigned int c,
@@ -841,6 +843,10 @@ static void netdev_connect_free(struct netdev *netdev)l_genl_family_cancel (nl80211, netdev->get_oci_cmd_id); netdev->get_oci_cmd_id =0 ; } + +/* Reset thresholds back to default */ + netdev->low_signal_threshold =LOW_SIGNAL_THRESHOLD ; + netdev->low_signal_threshold_5ghz =LOW_SIGNAL_THRESHOLD_5GHZ ; } static void netdev_connect_failed(struct netdev *netdev,
@@ -3674,6 +3680,39 @@ static int netdev_cqm_rssi_update(struct netdev *netdev)return 0 ; } +static int netdev_set_signal_thresholds (struct netdev *netdev,int threshold, +int threshold_5ghz) +{ +int current = netdev->frequency >4000 ? + netdev->low_signal_threshold_5ghz : + netdev->low_signal_threshold; +int new = netdev->frequency >4000 ? threshold_5ghz : threshold; + +if (current == new) +return -EALREADY ; + +l_debug ("changing low signal threshold to %d" , new); + + netdev->low_signal_threshold = threshold; + netdev->low_signal_threshold_5ghz = threshold_5ghz; + +netdev_cqm_rssi_update (netdev); + +return 0 ; +} + +int netdev_lower_signal_threshold (struct netdev *netdev) +{ +return netdev_set_signal_thresholds (netdev,CRITICAL_SIGNAL_THRESHOLD , +CRITICAL_SIGNAL_THRESHOLD_5GHZ ); +} + +int netdev_raise_signal_threshold (struct netdev *netdev) +{ +return netdev_set_signal_thresholds (netdev,LOW_SIGNAL_THRESHOLD , +LOW_SIGNAL_THRESHOLD_5GHZ ); +} +static bool netdev_connection_work_ready (struct wiphy_radio_work_item *item) { struct netdev *netdev = l_container_of(item, struct netdev, work);
@@ -3887,6 +3926,8 @@ done: netdev->handshake = hs; netdev->sm = sm; netdev->cur_rssi = bss->signal_strength /100 ; + netdev->low_signal_threshold =LOW_SIGNAL_THRESHOLD ; + netdev->low_signal_threshold_5ghz =LOW_SIGNAL_THRESHOLD_5GHZ ;if (netdev->rssi_levels_num)netdev_set_rssi_level_idx (netdev);
@@ -4260,6 +4301,8 @@ int netdev_ft_reassociate(struct netdev *netdev, netdev->event_filter = event_filter; netdev->connect_cb = cb; netdev->user_data = user_data; + netdev->low_signal_threshold =LOW_SIGNAL_THRESHOLD ; + netdev->low_signal_threshold_5ghz =LOW_SIGNAL_THRESHOLD_5GHZ ;/* * Cancel commands that could be running because of EAPoL activity
@@ -6278,6 +6321,14 @@ static int netdev_init(void) &LOW_SIGNAL_THRESHOLD_5GHZ))LOW_SIGNAL_THRESHOLD_5GHZ =-76 ; +if (!l_settings_get_int (settings,"General" ,"CriticalRoamThreshold" , + &CRITICAL_SIGNAL_THRESHOLD )) +CRITICAL_SIGNAL_THRESHOLD =-80 ; + +if (!l_settings_get_int (settings,"General" ,"CriticalRoamThreshold5G" , + &CRITICAL_SIGNAL_THRESHOLD_5GHZ )) +CRITICAL_SIGNAL_THRESHOLD_5GHZ =-82 ; + rand_addr_str =l_settings_get_value (settings,"General" ,"AddressRandomization" );if (rand_addr_str && !strcmp (rand_addr_str,"network" ))
src/netdev.h +2 -0
@@ -197,6 +197,8 @@ int netdev_neighbor_report_req(struct netdev *netdev,int netdev_set_rssi_report_levels (struct netdev *netdev,const int8_t *levels,size_t levels_num); +int netdev_lower_signal_threshold (struct netdev *netdev); +int netdev_raise_signal_threshold (struct netdev *netdev); int netdev_get_station(struct netdev *netdev, const uint8_t *mac, netdev_get_station_cb_t cb, void *user_data,
Signature · 1 line
2.34.1
Re: [PATCH v2 3/8] netdev: add critical signal threshold level
Hi James,
Quoted 9 lines · James Prestwood
This adds a secondary set of signal thresholds. The purpose of these are to provide more flexibility in how IWD roams. The critical threshold is intended to be temporary and is automatically reset upon any connection changes: disconnects, roams, or new connections.
--- src/netdev.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ src/netdev.h | 2 ++ 2 files changed, 53 insertions(+)
<snip>
src/netdev.c static int netdev_init(void) · line 6324
Quoted 5 lines
src/netdev.c +1
-0@@ -6278,6 +6321,14 @@ static int netdev_init(void) &LOW_SIGNAL_THRESHOLD_5GHZ))LOW_SIGNAL_THRESHOLD_5GHZ =-76 ; + if (!l_settings_get_int(settings, "General", "CriticalRoamThreshold",
Can we move the strings to a #define somewhere, similar to how knownnetworks.h does this? Easier to review and make sure the setting matches the docs.
src/netdev.c static int netdev_init(void) · line 6333
Quoted 9 lines
src/netdev.c +7
-0+ &CRITICAL_SIGNAL_THRESHOLD)) +CRITICAL_SIGNAL_THRESHOLD =-80 ; + +if (!l_settings_get_int (settings,"General" ,"CriticalRoamThreshold5G" , + &CRITICAL_SIGNAL_THRESHOLD_5GHZ )) +CRITICAL_SIGNAL_THRESHOLD_5GHZ =-82 ; + rand_addr_str =l_settings_get_value (settings,"General" ,"AddressRandomization" );
Regards,
-Denis
PATCH v2 4/8 station: emit property changed for ConnectedAccessPoint
In reply to James PrestwoodThis was missed in a prior patch set. When station is connecting or disconnecting ConnectedAccessPoint property change should be emitted.
--- src/station.c | 4 ++++ 1 file changed, 4 insertions(+)
src/station.c +4 -0
@@ -1694,6 +1694,8 @@ static void station_enter_state(struct station *station,l_dbus_property_changed (dbus,netdev_get_path (station->netdev),IWD_STATION_INTERFACE ,"ConnectedNetwork" ); +l_dbus_property_changed (dbus,netdev_get_path (station->netdev), +IWD_STATION_INTERFACE ,"ConnectedAccessPoint" );l_dbus_property_changed (dbus,network_get_path (station->connected_network),IWD_NETWORK_INTERFACE ,"Connected" );
@@ -1865,6 +1867,8 @@ static void station_reset_connection_state(struct station *station)l_dbus_property_changed (dbus,netdev_get_path (station->netdev),IWD_STATION_INTERFACE ,"ConnectedNetwork" ); +l_dbus_property_changed (dbus,netdev_get_path (station->netdev), +IWD_STATION_INTERFACE ,"ConnectedAccessPoint" );l_dbus_property_changed (dbus,network_get_path (network),IWD_NETWORK_INTERFACE ,"Connected" ); l_dbus_object_remove_interface(dbus, netdev_get_path(station->netdev),
Signature · 1 line
2.34.1
Denis Kenzior
AppliedRe: [PATCH v2 4/8] station: emit property changed for ConnectedAccessPoint
Hi James,
Quoted 6 lines · James Prestwood
This was missed in a prior patch set. When station is connecting or disconnecting ConnectedAccessPoint property change should be emitted.
--- src/station.c | 4 ++++ 1 file changed, 4 insertions(+)
Applied, thanks.
Regards,
-Denis
PATCH v2 5/8 station: add Affinities DBus property
In reply to James PrestwoodThis property will hold an array of object paths for BasicServiceSet (BSS) objects. For the purpose of this patch only the setter/getter and client watch is implemented. The purpose of this array is to guide or loosly lock IWD to certain BSS's provided that some external client has more information about the environment than what IWD takes into account for its roaming decisions.
For the time being, the array is limited to only the connected BSS path, and any roams or disconnects will clear the array.
The intended use case for this is if the device is stationary an external client could reduce the likelihood of roaming by setting the affinity to the current BSS.
--- src/station.c | 145 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+)
v2:
* Limit Affinities to only the connected BSS
* Change station->affinities to queue rather than char**
src/station.c +145 -0
@@ -128,6 +128,10 @@ struct station {uint64_t last_roam_scan; +struct l_queue *affinities; +unsigned int affinity_watch; +char *affinity_client; + bool preparing_roam : 1; bool roam_scan_full : 1; bool signal_low : 1;
@@ -449,6 +453,14 @@ static const char *station_get_bss_path(struct station *station,return __network_path_append_bss (network_path, bss); } +static bool match_bss_path (const void *data,const void *user_data) +{ +const char *path1 = data; +const char *path2 = user_data; + +return !strcmp (path1, path2); +} +static bool station_unregister_bss (struct station *station,struct scan_bss *bss) {
@@ -457,6 +469,8 @@ static bool station_unregister_bss(struct station *station,if (L_WARN_ON (!path))return false; +l_queue_remove_if (station->affinities, match_bss_path, path); +return l_dbus_unregister_object (dbus_get_bus (), path); }
@@ -1740,6 +1754,13 @@ static void station_enter_state(struct station *station,station_set_evict_nocarrier (station, true);station_set_drop_neighbor_discovery (station, false);station_set_drop_unicast_l2_multicast (station, false); + +if (station->affinity_watch) { +l_dbus_remove_watch (dbus_get_bus (), + station->affinity_watch); + station->affinity_watch =0 ; + } +break ;case STATION_STATE_DISCONNECTING :case STATION_STATE_NETCONFIG :
@@ -1747,6 +1768,12 @@ static void station_enter_state(struct station *station,case STATION_STATE_ROAMING :case STATION_STATE_FT_ROAMING :case STATION_STATE_FW_ROAMING : +if (station->affinity_watch) { +l_dbus_remove_watch (dbus_get_bus (), + station->affinity_watch); + station->affinity_watch =0 ; + } +station_set_evict_nocarrier (station, false);break ; }
@@ -4520,6 +4547,118 @@ static bool station_property_get_state(struct l_dbus *dbus,return true; } +static bool station_property_get_affinities (struct l_dbus *dbus, +struct l_dbus_message *message, +struct l_dbus_message_builder *builder, +void *user_data) +{ +struct station *station = user_data; +const struct l_queue_entry *e; + +if (!station->connected_network) +return false; + +l_dbus_message_builder_enter_array (builder,"o" ); + +for (e =l_queue_get_entries (station->affinities); e; e = e->next) { +const char *path = e->data; + +l_dbus_message_builder_append_basic (builder,'o' , path); + } + +l_dbus_message_builder_leave_array (builder); + +return true; +} + +static void station_affinity_disconnected_cb (struct l_dbus *dbus, +void *user_data) +{ +struct station *station = user_data; + +l_dbus_remove_watch (dbus_get_bus (), station->affinity_watch); + station->affinity_watch =0 ; + +l_debug ("client that set affinity has disconnected" ); +} + +static void station_affinity_watch_destroy (void *user_data) +{ +struct station *station = user_data; + +l_free (station->affinity_client); + station->affinity_client =NULL ; + +l_queue_destroy (station->affinities, l_free); + station->affinities =NULL ; + +l_dbus_property_changed (dbus_get_bus (), +netdev_get_path (station->netdev), +IWD_STATION_INTERFACE ,"Affinities" ); +} + +static struct l_dbus_message *station_property_set_affinities ( +struct l_dbus *dbus, +struct l_dbus_message *message, +struct l_dbus_message_iter *new_value, +l_dbus_property_complete_cb_t complete, +void *user_data) +{ +struct station *station = user_data; +struct l_dbus_message_iter array; +const char *sender =l_dbus_message_get_sender (message); +const char *path; +struct l_queue *new_affinities; + +if (!station->connected_network) +return dbus_error_not_connected (message); + +if (!station->affinity_watch) { + station->affinity_client =l_strdup (sender); + station->affinity_watch =l_dbus_add_disconnect_watch (dbus, + sender, + station_affinity_disconnected_cb, + station, + station_affinity_watch_destroy); + }else if (strcmp (station->affinity_client, sender)) { +l_warn ("Only one client may manage Affinities property" ); +return dbus_error_not_available (message); + } + +if (!l_dbus_message_iter_get_variant (new_value,"ao" , &array)) +return dbus_error_invalid_args (message); + + new_affinities =l_queue_new (); + +while (l_dbus_message_iter_next_entry (&array, &path)) { +struct scan_bss *bss =l_dbus_object_get_data (dbus_get_bus (), + path, +IWD_BSS_INTERFACE ); + +/* +* TODO: For now only allow the affinities array to contain the +* connected BSS path. Any other values will be rejected. +* This could change in the future. +*/ +if (bss != station->connected_bss) { +l_queue_destroy (new_affinities, l_free); +return dbus_error_invalid_args (message); + } + +l_queue_push_head (new_affinities,l_strdup (path)); + } + +l_queue_destroy (station->affinities, l_free); + station->affinities = new_affinities; + +l_dbus_property_changed (dbus,netdev_get_path (station->netdev), +IWD_STATION_INTERFACE ,"Affinities" ); + +complete (dbus, message,NULL ); + +return NULL ; +} +void station_foreach (station_foreach_func_t func,void *user_data) {const struct l_queue_entry *entry;
@@ -4842,6 +4981,9 @@ static void station_free(struct station *station)l_queue_destroy (station->roam_bss_list, l_free); +if (station->affinity_watch) +l_dbus_remove_watch (dbus_get_bus (), station->affinity_watch); +l_free (station); }
@@ -4878,6 +5020,9 @@ static void station_setup_interface(struct l_dbus_interface *interface) station_property_get_scanning, NULL);l_dbus_interface_property (interface,"State" ,0 ,"s" , station_property_get_state,NULL ); +l_dbus_interface_property (interface,"Affinities" ,0 ,"ao" , + station_property_get_affinities, + station_property_set_affinities); }static void station_destroy_interface (void *user_data)
Signature · 1 line
2.34.1
PATCH v2 6/8 station: Use Affinities property to change roaming threshold
In reply to James PrestwoodWhen the affinity is set to the current BSS lower the roaming threshold to loosly lock IWD to the current BSS. The lower threshold is automatically removed upon roaming/disconnection since the affinity array is also cleared out.
--- src/station.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
src/station.c +17 -0
@@ -4580,6 +4580,9 @@ static void station_affinity_disconnected_cb(struct l_dbus *dbus, station->affinity_watch =0 ;l_debug ("client that set affinity has disconnected" ); + +/* The client who set the affinity disconnected, raise the threshold */ +netdev_raise_signal_threshold (station->netdev); }static void station_affinity_watch_destroy (void *user_data)
@@ -4609,6 +4612,7 @@ static struct l_dbus_message *station_property_set_affinities(const char *sender =l_dbus_message_get_sender (message);const char *path;struct l_queue *new_affinities; +bool lower_threshold = false;if (!station->connected_network)return dbus_error_not_connected (message);
@@ -4645,6 +4649,8 @@ static struct l_dbus_message *station_property_set_affinities(return dbus_error_invalid_args (message); } + lower_threshold = true; +l_queue_push_head (new_affinities,l_strdup (path)); }
@@ -4654,6 +4660,17 @@ static struct l_dbus_message *station_property_set_affinities(l_dbus_property_changed (dbus,netdev_get_path (station->netdev),IWD_STATION_INTERFACE ,"Affinities" ); +/* +* If affinity was set to the current BSS, lower the roam threshold. If +* the connected BSS was not in the list raise the signal threshold. +* The threshold may already be raised, in which case netdev will detect +* this and do nothing. +*/ +if (lower_threshold) +netdev_lower_signal_threshold (station->netdev); +else +netdev_raise_signal_threshold (station->netdev); +complete (dbus, message,NULL );return NULL ;
Signature · 1 line
2.34.1
PATCH v2 7/8 auto-t: add affinities property for station, and extended_service_set
In reply to James Prestwood--- autotests/util/iwd.py | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
autotests/util/iwd.py +18 -0
@@ -596,6 +596,11 @@ class Device(IWDDBusAbstract): props = self._station_properties() return props.get('ConnectedNetwork') + @property + def connected_bss(self): + props = self._station_properties() + return props.get('ConnectedAccessPoint') + @property def powered(self): '''
@@ -630,6 +635,19 @@ class Device(IWDDBusAbstract): self._station_debug._prop_proxy.Set(IWD_STATION_DEBUG_INTERFACE, 'AutoConnect', value) + @property + def affinities(self): + return self._station_properties()['Affinities'] + + @affinities.setter + def affinities(self, values): + self._station_properties() + self._station_prop_if.Set( + IWD_STATION_INTERFACE, 'Affinities', + dbus.Array([dbus.ObjectPath(v) for v in values], signature="o"), + reply_handler=self._success, error_handler=self._failure) + self._wait_for_async_op() + def scan(self, wait=True): '''Schedule a network scan.
Signature · 1 line
2.34.1
PATCH v2 8/8 auto-t: add tests for Affinities behavior
In reply to James Prestwood--- autotests/testAffinity/TestFT.psk | 2 + autotests/testAffinity/ft-psk-ccmp-1.conf | 41 ++++ autotests/testAffinity/ft-psk-ccmp-2.conf | 41 ++++ autotests/testAffinity/hw.conf | 8 + autotests/testAffinity/main.conf | 5 + autotests/testAffinity/test_set_affinity.py | 216 ++++++++++++++++++++ 6 files changed, 313 insertions(+) create mode 100644 autotests/testAffinity/TestFT.psk create mode 100644 autotests/testAffinity/ft-psk-ccmp-1.conf create mode 100644 autotests/testAffinity/ft-psk-ccmp-2.conf create mode 100644 autotests/testAffinity/hw.conf create mode 100644 autotests/testAffinity/main.conf create mode 100644 autotests/testAffinity/test_set_affinity.py
autotests/testAffinity/TestFT.psk new file +2 -0
@@ -0,0 +1,2 @@ +[Security] +Passphrase=EasilyGuessedPassword
autotests/testAffinity/ft-psk-ccmp-1.conf new file +41 -0
41 lines not on this page · raw message
autotests/testAffinity/ft-psk-ccmp-2.conf new file +41 -0
41 lines not on this page · raw message
autotests/testAffinity/hw.conf new file +8 -0
@@ -0,0 +1,8 @@ +[SETUP] +num_radios=3 +start_iwd=0 +hwsim_medium=yes + +[HOSTAPD] +rad0=ft-psk-ccmp-1.conf +rad1=ft-psk-ccmp-2.conf
autotests/testAffinity/main.conf new file +5 -0
@@ -0,0 +1,5 @@ +[Scan] +DisableMacAddressRandomization=true + +[General] +RoamRetryInterval=1
autotests/testAffinity/test_set_affinity.py new file +216 -0
216 lines not on this page · raw message
Signature · 1 line
2.34.1
Hi James,
Quoted 13 lines · James Prestwood
This documents new DBus property that expose a bit more control to how IWD roams.
Setting the affinity on the connected BSS effectively "locks" IWD to that BSS (except at critical RSSI levels, explained below). This can be useful for clients that have access to more information about the environment than IWD. For example, if a client is stationary there is likely no point in trying to roam until it has moved elsewhere.
A new main.conf option would also be added:
[General].CriticalRoamThreshold
Quoted 7 lines
This would be the new roam threshold set if the currently connected BSS is in the Affinities list. If the RSSI continues to drop below this level IWD will still attempt to roam.
--- doc/station-api.txt | 17 +++++++++++++++++ src/iwd.config.rst | 16 ++++++++++++++++ 2 files changed, 33 insertions(+)
Couple of questions:
doc/station-api.txt Properties string State [readonly] · line 185
Quoted 4 lines
doc/station-api.txt +4
-0+ Setting the affinity will lower the roaming threshold, + effectively locking IWD to the current BSS unless the + RSSI drops below the critical threshold set by + [General].CriticalRoamThreshold{_5GHz} at which point
Should '{_5GHz}' be without the '_'?
<snip>
Review
Quoted 2 lines
(quoted diff) +2
-0+ + * - CriticalRoamThreshold5G
What about 6G?
src/iwd.config.rst The group ``[General]`` contains general settings. · line 150
Quoted 8 lines
src/iwd.config.rst +5
-0+ - Value: rssi dBm value, from -100 to 1, default: **-82** + + This has the same effect as ``CriticalRoamThreshold``, but for the 5GHz + band. + * - RoamRetryInterval - Value: unsigned int value in seconds (default: **60**)
Regards,
-Denis
Hi Denis,
Quoted 24 lines · Denis Kenzior
Hi James,
Quoted 13 lines · James Prestwood
This documents new DBus property that expose a bit more control to how IWD roams.
Setting the affinity on the connected BSS effectively "locks" IWD to that BSS (except at critical RSSI levels, explained below). This can be useful for clients that have access to more information about the environment than IWD. For example, if a client is stationary there is likely no point in trying to roam until it has moved elsewhere.
A new main.conf option would also be added:
[General].CriticalRoamThreshold
Quoted 7 lines
This would be the new roam threshold set if the currently connected BSS is in the Affinities list. If the RSSI continues to drop below this level IWD will still attempt to roam.
---
doc/station-api.txt| 17 +++++++++++++++++ src/iwd.config.rst | 16 ++++++++++++++++2 files changed, 33 insertions(+)
Quoted 8 lines
Couple of questions:
Quoted 4 lines
+ Setting the affinity will lower the roaming threshold, + effectively locking IWD to the current BSS unless the + RSSI drops below the critical threshold set by + [General].CriticalRoamThreshold{_5GHz} at which point
Should '{
_5GHz}' be without the '_'?
Yep, that was a typo
Quoted 7 lines
<snip>
Quoted 2 lines
+
+ * - CriticalRoamThreshold5GWhat about 6G?
We could add one for 6G as well, I was just maintaining what we had today with respect to the existing thresholds. I can add 6GHz thresholds across the board in a later patch set.
Quoted 13 lines
Quoted 10 lines
+ - Value: rssi dBm value, from -100 to 1, default: **-82** +
+ This has the same effect as ``CriticalRoamThreshold``, but for the 5GHz
+ band.
+
* - RoamRetryInterval
- Value: unsigned int value in seconds (default: **60**)Regards,
-Denis
Hi James,
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
+ [General].CriticalRoamThreshold{_5GHz} at which point
Should '{
_5GHz}' be without the '_'?Yep, that was a typo
Okay, and I guess also drop the Hz since the setting is just 5G.
Quoted 9 lines
Quoted 8 lines
<snip>
Quoted 2 lines
+
+ * - CriticalRoamThreshold5GWhat about 6G?
We could add one for 6G as well, I was just maintaining what we had today with respect to the existing thresholds. I can add 6GHz thresholds across the board in a later patch set.
Okay, that's fine.
Regards,
-Denis