Skip to contentSkip to conversation

NULL dereference OOPS on SysRq-w

DISCUSSION Dan Noe 2 participants 5 messages Apr 27, 2008 – Apr 28, 2008 Scheduler

lore
Share & tools
lore

Dan Noe

author
#0 lore raw

I've experienced the following on a build done today from Linus's linux-2.6 tree. After a fresh boot I do "echo "w" > /proc/sysrq_trigger" and I get the OOPS, every time. I looked at the sched_debug code but I admit I was lost. Not sure why sched.c includes sched_debug.c.

Cheers,
Dan

Via netconsole:

SysRq : Show Blocked State
task PC stack pid father
Sched Debug Version: v0.07, 2.6.25 #12
now at 275558.648467 msecs

  .sysctl_sched_latency                    : 40.000000
  .sysctl_sched_min_granularity            : 8.000000
  .sysctl_sched_wakeup_granularity         : 20.000000
  .sysctl_sched_child_runs_first           : 0.000001
  .sysctl_sched_features                   : 895

cpu#0, 2194.491 MHz

  .nr_running                    : 3
  .load                          : 3145728
  .nr_switches                   : 13171
  .nr_load_updates               : 6476
  .nr_uninterruptible            : -94
  .jiffies                       : 4294961186
  .next_balance                  : 4294.961046
  .curr->pid                     : 3078
  .clock                         : 101239.537371
  .idle_clock                    : 0.000000
  .prev_clock_raw                : 296931.974646
  .clock_warps                   : 0
  .clock_overflows               : 12189
  .clock_underflows              : 4657
  .clock_deep_idle_events        : 4
  .clock_max_delta               : 499.306905
  .cpu_load[0]                   : 0
  .cpu_load[1]                   : 96
  .cpu_load[2]                   : 14028
  .cpu_load[3]                   : 62524
  .cpu_load[4]                   : 91704

cfs_rq[0]:

  .exec_clock                    : 400.314576
  .MIN_vruntime                  : 17300.019734
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 17300.019734
  .spread                        : 0.000000
  .spread0                       : 0.000000
  .nr_running                    : 1
  .load                          : 1024
  .bkl_count                     : 353
  .nr_spread_over                : 44
  .shares                        : 1024

cfs_rq[0]:

  .exec_clock                    : 1.281845
  .MIN_vruntime                  : 0.000001
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 0.000001
  .spread                        : 0.000000
  .spread0                       : 0.000000
  .nr_running                    : 0
  .load                          : 0
  .bkl_count                     : 353
  .nr_spread_over                : 2
  .shares                        : 0

cfs_rq[0]:

  .exec_clock                    : 13.306219
  .MIN_vruntime                  : 0.000001
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 0.000001
  .spread                        : 0.000000
  .spread0                       : 0.000000
  .nr_running                    : 0
  .load                          : 0
  .bkl_count                     : 353
  .nr_spread_over                : 3
  .shares                        : 0

cfs_rq[0]:

  .exec_clock                    : 0.380305
  .MIN_vruntime                  : 0.000001
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 0.000001
  .spread                        : 0.000000
  .spread0                       : 0.000000
  .nr_running                    : 0
  .load                          : 0
  .bkl_count                     : 353
  .nr_spread_over                : 1
  .shares                        : 0

cfs_rq[0]:

  .exec_clock                    : 6.341858
  .MIN_vruntime                  : 0.000001
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 0.000001
  .spread                        : 0.000000
  .spread0                       : 0.000000
  .nr_running                    : 0
  .load                          : 0
  .bkl_count                     : 353
  .nr_spread_over                : 1
  .shares                        : 0

cfs_rq[0]:

  .exec_clock                    : 6.341858
  .MIN_vruntime                  : 0.000001
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 0.000001
  .spread                        : 0.000000
  .spread0                       : 0.000000
  .nr_running                    : 0
  .load                          : 0
  .bkl_count                     : 353
  .nr_spread_over                : 16
  .shares                        : 1024

cfs_rq[0]:

  .exec_clock                    : 12850.277817
  .MIN_vruntime                  : 69710.961030
  .min_vruntime                  : 2099676.053218
  .max_vruntime                  : 69751.539537
  .spread                        : 40.578507
  .spread0                       : 0.000000
  .nr_running                    : 3
  .load                          : 5169  .bkl_count 

: 353 .nr_spread_over : 2038 .shares
: 2048BUG: unable to handle kernel NULL pointer dereference at
0000000000000018IP: [<ffffffff802b9ab6>] seq_printf+0x2e/0xa7
PGD 7dd05067 PUD 7e0fb067 PMD 0 Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOCCPU 0

Modules linked in: netconsole nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ac battery ipv6 dm_snapshot dm_mirror dm_log dm_mod eeprom coretemp loop parport_pc parport snd_hda_intel rtc iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core snd_pc
m snd_timer snd soundcore snd_page_alloc button intel_agp evdev ext3 jbd mbcache sd_mod ata_generic ata_piix pata_acpi libata scsi_mod dock ehci_hcd uhci_hcd ide_pci_generic piix ide_core r8169 usbcore thermal processor fan
Pid: 3078, comm: zsh Not tainted 2.6.25 #12
RIP: 0010:[<ffffffff802b9ab6>]  [<ffffffff802b9ab6>] seq_printf+0x2e/0xa7
RSP: 0018:ffff81007e387c68  EFLAGS: 00010092
RAX: ffffffff804eec79 RBX: 0000000000000000 RCX: ffffee71806668f8
RDX: ffff810001091f80 RSI: ffffffff804eec79 RDI: 0000000000000000
RBP: ffff81007e387d48 R08: 0000000000000002 R09: ffffffff8024fb76
R10: 00000000d59bb5d6 R11: ffff81007e387968 R12: 0000000000000000
R13: 0000000000000000 R14: ffff810001091740 R15: 0000000000000007
FS:  00007f7dce0896e0(0000) GS:ffffffff8057a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000018 CR3: 000000007e3ed000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process zsh (pid: 3078, threadinfo ffff81007e386000, task ffff81007e090000)
Stack:  0000000000000002 ffffffff8024fb76 ffff81007e090090 ffff81007e090000
 ffffffff8022dc31 0000000000000046 ffff810001091f80 ffffee71806668f8
 0000000000000002 ffffffff8024fb76 0000000000000096 0000000000000000
Call Trace:
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff8022dc31>] ? print_cfs_rq+0x130/0x465
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff8041dfa5>] ? _spin_unlock_irqrestore+0x66/0x74
 [<ffffffff8022df57>] ? print_cfs_rq+0x456/0x465
 [<ffffffff8022e920>] sched_debug_show+0x9ba/0xd28
 [<ffffffff8022f978>] ? cpu_clock+0xf0/0xff
 [<ffffffff802745fe>] ? get_timestamp+0x9/0xf
 [<ffffffff80274628>] ? touch_softlockup_watchdog+0x24/0x2d
 [<ffffffff802319ec>] show_state_filter+0x8b/0xaa
 [<ffffffff80375848>] sysrq_handle_showstate_blocked+0xe/0x10
 [<ffffffff803757a3>] __handle_sysrq+0x9e/0x135
 [<ffffffff802e2544>] ? write_sysrq_trigger+0x0/0x3a
 [<ffffffff802e2574>] write_sysrq_trigger+0x30/0x3a
 [<ffffffff802dc6b2>] proc_reg_write+0x8a/0xa7
 [<ffffffff802a0118>] vfs_write+0xa7/0xe1
 [<ffffffff802a020c>] sys_write+0x47/0x6d
 [<ffffffff8020c3ab>] system_call_after_swapgs+0x7b/0x80
Code: f0 48 89 e5 53 48 89 fb 48 81 ec d8 00 00 00 48 89 95 50 ff ff ff 48 89 8d 58 ff ff ff 4c 89 85 60 ff ff ff 4c 89 8d 68 ff ff ff <48> 8b 7f 18 48 3b 7b 08 73 5a 48 8b 73 08 48 8d 55 10 48 8d 8d
RIP  [<ffffffff802b9ab6>] seq_printf+0x2e/0xa7
 RSP <ffff81007e387c68>
CR2: 0000000000000018
---[ end trace ffd04a8c8a72749a ]---
note: zsh[3078] exited with preempt_count 2
BUG: sleeping function called from invalid context at kernel/rwsem.c:21
in_atomic():1, irqs_disabled():1
INFO: lockdep is turned off.
irq event stamp: 136430
hardirqs last  enabled at (136429): [<ffffffff8041d4c0>] trace_hardirqs_on_thunk+0x35/0x3a
hardirqs last disabled at (136430): [<ffffffff8041de72>] _spin_lock_irqsave+0x19/0x73
softirqs last  enabled at (131948): [<ffffffff8023dcec>] __do_softirq+0x9e/0xa7
softirqs last disabled at (131911): [<ffffffff8020d68c>] call_softirq+0x1c/0x28
Pid: 3078, comm: zsh Tainted: G      D  2.6.25 #12
Call Trace:
 [<ffffffff80255f3d>] ? print_irqtrace_events+0x110/0x114
 [<ffffffff8022f7fc>] __might_sleep+0xda/0xdc
 [<ffffffff8041c7f6>] down_read+0x20/0x68
 [<ffffffff802681eb>] acct_collect+0x42/0x1a7
 [<ffffffff8023ba57>] do_exit+0x205/0x713
 [<ffffffff803723e2>] ? do_unblank_screen+0x29/0x125
 [<ffffffff8020d90d>] oops_begin+0x0/0x8f
 [<ffffffff80223c64>] do_page_fault+0x69f/0x757
 [<ffffffff8041e2ed>] error_exit+0x0/0xa9
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff802b9ab6>] ? seq_printf+0x2e/0xa7
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff8022dc31>] ? print_cfs_rq+0x130/0x465
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff8041dfa5>] ? _spin_unlock_irqrestore+0x66/0x74
 [<ffffffff8022df57>] ? print_cfs_rq+0x456/0x465
 [<ffffffff8022e920>] ? sched_debug_show+0x9ba/0xd28
 [<ffffffff8022f978>] ? cpu_clock+0xf0/0xff
 [<ffffffff802745fe>] ? get_timestamp+0x9/0xf
 [<ffffffff80274628>] ? touch_softlockup_watchdog+0x24/0x2d
 [<ffffffff802319ec>] ? show_state_filter+0x8b/0xaa
 [<ffffffff80375848>] ? sysrq_handle_showstate_blocked+0xe/0x10
 [<ffffffff803757a3>] ? __handle_sysrq+0x9e/0x135
 [<ffffffff802e2544>] ? write_sysrq_trigger+0x0/0x3a
 [<ffffffff802e2574>] ? write_sysrq_trigger+0x30/0x3a
 [<ffffffff802dc6b2>] ? proc_reg_write+0x8a/0xa7
 [<ffffffff802a0118>] ? vfs_write+0xa7/0xe1
 [<ffffffff802a020c>] ? sys_write+0x47/0x6d
 [<ffffffff8020c3ab>] ? system_call_after_swapgs+0x7b/0x80
Signature · 3 lines
                    /--------------- - -  -  -   -   -
                    |  Dan Noe
                    |  http://isomerica.net/~dpn/
#1 lore raw
Quoted 14 lines · Dan Noe

I've experienced the following on a build done today from Linus's linux-2.6 tree. After a fresh boot I do "echo "w" > /proc/sysrq_trigger" and I get the OOPS, every time. I looked at the sched_debug code but I admit I was lost. Not sure why sched.c includes sched_debug.c.

Cheers,
Dan

Via netconsole:

SysRq : Show Blocked State
task PC stack pid father
Sched Debug Version: v0.07, 2.6.25 #12
now at 275558.648467 msecs

[snip]

Quoted 49 lines

: 2038 .shares : 2048BUG: unable to handle kernel
NULL pointer dereference at 0000000000000018IP: [<ffffffff802b9ab6>] seq_printf+0x2e/0xa7
PGD 7dd05067 PUD 7e0fb067 PMD 0 Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOCCPU 0

Modules linked in: netconsole nfsd lockd nfs_acl auth_rpcgss sunrpc 

exportfs ac battery ipv6 dm_snapshot dm_mirror dm_log dm_mod eeprom coretemp loop parport_pc parport snd_hda_intel rtc iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core snd_pc
m snd_timer snd soundcore snd_page_alloc button intel_agp evdev ext3 jbd mbcache sd_mod ata_generic ata_piix pata_acpi libata scsi_mod dock ehci_hcd uhci_hcd ide_pci_generic piix ide_core r8169 usbcore thermal processor fan
Pid: 3078, comm: zsh Not tainted 2.6.25 #12

RIP: 0010:[<ffffffff802b9ab6>]  [<ffffffff802b9ab6>] seq_printf+0x2e/0xa7
RSP: 0018:ffff81007e387c68  EFLAGS: 00010092
RAX: ffffffff804eec79 RBX: 0000000000000000 RCX: ffffee71806668f8
RDX: ffff810001091f80 RSI: ffffffff804eec79 RDI: 0000000000000000
RBP: ffff81007e387d48 R08: 0000000000000002 R09: ffffffff8024fb76
R10: 00000000d59bb5d6 R11: ffff81007e387968 R12: 0000000000000000
R13: 0000000000000000 R14: ffff810001091740 R15: 0000000000000007
FS:  00007f7dce0896e0(0000) GS:ffffffff8057a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000018 CR3: 000000007e3ed000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process zsh (pid: 3078, threadinfo ffff81007e386000, task ffff81007e090000)
Stack:  0000000000000002 ffffffff8024fb76 ffff81007e090090 ffff81007e090000
 ffffffff8022dc31 0000000000000046 ffff810001091f80 ffffee71806668f8
 0000000000000002 ffffffff8024fb76 0000000000000096 0000000000000000
Call Trace:
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff8022dc31>] ? print_cfs_rq+0x130/0x465
 [<ffffffff8024fb76>] ? up+0xf/0x39
 [<ffffffff8041dfa5>] ? _spin_unlock_irqrestore+0x66/0x74
 [<ffffffff8022df57>] ? print_cfs_rq+0x456/0x465
 [<ffffffff8022e920>] sched_debug_show+0x9ba/0xd28
 [<ffffffff8022f978>] ? cpu_clock+0xf0/0xff
 [<ffffffff802745fe>] ? get_timestamp+0x9/0xf
 [<ffffffff80274628>] ? touch_softlockup_watchdog+0x24/0x2d
 [<ffffffff802319ec>] show_state_filter+0x8b/0xaa
 [<ffffffff80375848>] sysrq_handle_showstate_blocked+0xe/0x10
 [<ffffffff803757a3>] __handle_sysrq+0x9e/0x135
 [<ffffffff802e2544>] ? write_sysrq_trigger+0x0/0x3a
 [<ffffffff802e2574>] write_sysrq_trigger+0x30/0x3a
 [<ffffffff802dc6b2>] proc_reg_write+0x8a/0xa7
 [<ffffffff802a0118>] vfs_write+0xa7/0xe1
 [<ffffffff802a020c>] sys_write+0x47/0x6d
 [<ffffffff8020c3ab>] system_call_after_swapgs+0x7b/0x80
Code: f0 48 89 e5 53 48 89 fb 48 81 ec d8 00 00 00 48 89 95 50 ff ff ff 48 
Quoted 6 lines

89 8d 58 ff ff ff 4c 89 85 60 ff ff ff 4c 89 8d 68 ff ff ff <48> 8b 7f 18 48 3b 7b 08 73 5a 48 8b 73 08 48 8d 55 10 48 8d 8d
RIP [<ffffffff802b9ab6>] seq_printf+0x2e/0xa7
RSP <ffff81007e387c68>
CR2: 0000000000000018

---[ end trace ffd04a8c8a72749a ]---

[snip]

I have a fix for the NULL pointer reference BUG, tested on my pc.
---

"m" will be NULL if seq_printf & seq_puts is called from sched_debug_show Use SEQ_* macros to fix it

---

include/linux/sched.h |   22 ++++++++++++++++++++++
kernel/sched_debug.c  |   12 ------------
kernel/sched_fair.c   |    6 +++---
3 files changed, 25 insertions(+), 15 deletions(-)
include/linux/sched.h +22 -0
diff -upr linux/include/linux/sched.h linux.new/include/linux/sched.h
@@ -2145,6 +2145,28 @@ static inline void migration_init(void)
 #define TASK_SIZE_OF(tsk)	TASK_SIZE
 #endif
 
+#ifdef CONFIG_SCHED_DEBUG
+/*
+ * This allows printing both to /proc/sched_debug and
+ * to the console
+ */
+#define SEQ_printf(m, x...)			\
+ do {						\
+	if (m)					\
+		seq_printf(m, x);		\
+	else					\
+		printk(x);			\
+ } while (0)
+
+#define SEQ_puts(m, x...)			\
+ do {						\
+	if (m)					\
+		seq_puts(m, x);			\
+	else					\
+		printk(x);			\
+ } while (0)
+#endif
+
 #endif /* __KERNEL__ */
 
 #endif
kernel/sched_debug.c +0 -12
diff -upr linux/kernel/sched_debug.c linux.new/kernel/sched_debug.c
@@ -17,18 +17,6 @@
 #include <linux/utsname.h>
 
 /*
- * This allows printing both to /proc/sched_debug and
- * to the console
- */
-#define SEQ_printf(m, x...)			\
- do {						\
-	if (m)					\
-		seq_printf(m, x);		\
-	else					\
-		printk(x);			\
- } while (0)
-
-/*
  * Ease the printing of nsec fields:
  */
 static long long nsec_high(unsigned long long nsec)
kernel/sched_fair.c +3 -3
diff -upr linux/kernel/sched_fair.c linux.new/kernel/sched_fair.c
@@ -1623,9 +1623,9 @@ print_cfs_rq_tasks(struct seq_file *m, s
 		int i;
 
 		for (i = depth; i; i--)
-			seq_puts(m, "  ");
+			SEQ_puts(m, "  ");
 
-		seq_printf(m, "%lu %s %lu\n",
+		SEQ_printf(m, "%lu %s %lu\n",
 				se->load.weight,
 				entity_is_task(se) ? "T" : "G",
 				calc_delta_weight(SCHED_LOAD_SCALE, se)
@@ -1643,7 +1643,7 @@ static void print_cfs_stats(struct seq_f
 	for_each_leaf_cfs_rq(cpu_rq(cpu), cfs_rq)
 		print_cfs_rq(m, cpu, cfs_rq);
 
-	seq_printf(m, "\nWeight tree:\n");
+	SEQ_printf(m, "\nWeight tree:\n");
 	print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
 	rcu_read_unlock();
 }
author
#2 lore raw
Quoted 9 lines · Dave Young

[snip]

I have a fix for the NULL pointer reference BUG, tested on my pc.
---

"m" will be NULL if seq_printf & seq_puts is called from sched_debug_show Use SEQ_* macros to fix it

There is actually already a patch out for this which simply hasn't made it upstream yet - Mike Galbraith emailed me with it and it indeed fixes the problem. I hadn't realized his email didn't go to lkml.. otherwise I would have echoed that here to avoid wasting people's time. My apologies.

Cheers,
Dan

===

Here is his message:

From: [email protected]

Peter's fix didn't make it up-stream.

Subject: sched: fix oops

sched_debug uses SEQ_printf to use printk when the seqfile 'm' is NULL. Instead of doing that here too; choose to not output the weight tree to cut back on output.

---

kernel/sched_fair.c +4 -2
index 89fa32b..353a481 100644
@@ -1643,8 +1643,10 @@ static void print_cfs_stats(struct seq_file *m, int cpu)
 	for_each_leaf_cfs_rq(cpu_rq(cpu), cfs_rq)
 		print_cfs_rq(m, cpu, cfs_rq);
 
-	seq_printf(m, "\nWeight tree:\n");
-	print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
+	if (m) {
+		seq_printf(m, "\nWeight tree:\n");
+		print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
+	}
 	rcu_read_unlock();
 }
 #endif
Signature · 3 lines
                    /--------------- - -  -  -   -   -
                    |  Dan Noe
                    |  http://isomerica.net/~dpn/
#3 lore raw
Quoted 12 lines · Dan Noe
Quoted 9 lines · Dave Young

[snip]

I have a fix for the NULL pointer reference BUG, tested on my pc.
---

"m" will be NULL if seq_printf & seq_puts is called from sched_debug_show Use SEQ_* macros to fix it

Quoted 4 lines

There is actually already a patch out for this which simply hasn't made it
upstream yet - Mike Galbraith emailed me with it and it indeed fixes the problem. I hadn't realized his email didn't go to lkml.. otherwise I would have echoed that here to avoid wasting people's time. My apologies.

Ok, thanks.

While debuging this issue I found another BUG about sysrq,

echo w >/proc/sys/kernel/sysrq
My system hangs, there's no response from then on.

Quoted 49 lines

Cheers,
Dan

===

Here is his message:

From: [email protected]

Peter's fix didn't make it up-stream.

Subject: sched: fix oops

sched_debug uses SEQ_printf to use printk when the seqfile 'm' is NULL. Instead of doing that here too; choose to not output the weight tree to cut back on output.

---
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 89fa32b..353a481 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1643,8 +1643,10 @@ static void print_cfs_stats(struct seq_file *m, int
cpu)

        for_each_leaf_cfs_rq(cpu_rq(cpu), cfs_rq)
                print_cfs_rq(m, cpu, cfs_rq);
 -       seq_printf(m, "\nWeight tree:\n");
 -       print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
 +       if (m) {

+ seq_printf(m, "\nWeight tree:\n");

+ print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
+ }

        rcu_read_unlock();

}
#endif

--

                    /--------------- - -  -  -   -   -
                    |  Dan Noe
                    |  http://isomerica.net/~dpn/
#4 lore raw
Quoted 18 lines · Dave Young
Quoted 12 lines · Dan Noe
Quoted 9 lines · Dave Young

[snip]

I have a fix for the NULL pointer reference BUG, tested on my pc.
---

"m" will be NULL if seq_printf & seq_puts is called from sched_debug_show Use SEQ_* macros to fix it

Quoted 4 lines

There is actually already a patch out for this which simply hasn't made it
upstream yet - Mike Galbraith emailed me with it and it indeed fixes the problem. I hadn't realized his email didn't go to lkml.. otherwise I would have echoed that here to avoid wasting people's time. My apologies.

Quoted 6 lines

Ok, thanks.

While debuging this issue I found another BUG about sysrq,

echo w >/proc/sys/kernel/sysrq
My system hangs, there's no response from then on.

Strange, the bug can not be reproduced now. Now I only get the expected result "Invalid argument".