Skip to contentSkip to conversation

drm: allow encoder mode_set even when connectors change for crtc

PATCH In review Sasha Levin 2 participants 9 messages Apr 3, 2025 – Apr 18, 2025

Subsystems (3)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/8 drm: allow encoder mode_set even when connectors change for crtc

From: Abhinav Kumar <[email protected]>

[ Upstream commit 7e182cb4f5567f53417b762ec0d679f0b6f0039d ]

In certain use-cases, a CRTC could switch between two encoders and because the mode being programmed on the CRTC remains the same during this switch, the CRTC's mode_changed remains false. In such cases, the encoder's mode_set also gets skipped.

Skipping mode_set on the encoder for such cases could cause an issue because even though the same CRTC mode was being used, the encoder type could have changed like the CRTC could have switched from a real time encoder to a writeback encoder OR vice-versa.

Allow encoder's mode_set to happen even when connectors changed on a CRTC and not just when the mode changed.

---
 drivers/gpu/drm/drm_atomic_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_atomic_helper.c +1 -1
index 0fde260b7edd8..dee3b81dec587 100644
@@ -1268,7 +1268,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
 		mode = &new_crtc_state->mode;
 		adjusted_mode = &new_crtc_state->adjusted_mode;
 
-		if (!new_crtc_state->mode_changed)
+		if (!new_crtc_state->mode_changed && !new_crtc_state->connectors_changed)
 			continue;
 
 		DRM_DEBUG_ATOMIC("modeset on [ENCODER:%d:%s]\n",
Signature · 1 line
2.39.5
author maintainer
#1 lore raw

PATCH 2/8 drm: panel-orientation-quirks: Add support for AYANEO 2S

From: Andrew Wyatt <[email protected]>

[ Upstream commit eb8f1e3e8ee10cff591d4a47437dfd34d850d454 ]

AYANEO 2S uses the same panel and orientation as the AYANEO 2.

Update the AYANEO 2 DMI match to also match AYANEO 2S.

---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_panel_orientation_quirks.c +2 -2
index bf90a5be956fe..6bb8d4502ca8e 100644
@@ -166,10 +166,10 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T103HAF"),
 		},
 		.driver_data = (void *)&lcd800x1280_rightside_up,
-	}, {	/* AYA NEO AYANEO 2 */
+	}, {	/* AYA NEO AYANEO 2/2S */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYANEO"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "AYANEO 2"),
+		  DMI_MATCH(DMI_PRODUCT_NAME, "AYANEO 2"),
 		},
 		.driver_data = (void *)&lcd1200x1920_rightside_up,
 	}, {	/* AYA NEO 2021 */
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

PATCH 3/8 drm: panel-orientation-quirks: Add new quirk for GPD Win 2

In reply to Sasha Levin

From: Andrew Wyatt <[email protected]>

[ Upstream commit a860eb9c6ba6cdbf32e3e01a606556e5a90a2931 ]

Some GPD Win 2 units shipped with the correct DMI strings.

Add a DMI match to correctly rotate the panel on these units.

---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_panel_orientation_quirks.c +6 -0
index 6bb8d4502ca8e..6fc9d638ccd23 100644
@@ -235,6 +235,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
 		},
 		.driver_data = (void *)&gpd_win2,
+	}, {	/* GPD Win 2 (correct DMI strings) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "GPD"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WIN2")
+		},
+		.driver_data = (void *)&lcd720x1280_rightside_up,
 	}, {	/* GPD Win 3 */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "GPD"),
Signature · 1 line
2.39.5
author maintainer
#3 lore raw

PATCH 4/8 drm/bridge: panel: forbid initializing a panel with unknown connector type

In reply to Sasha Levin

From: Luca Ceresoli <[email protected]>

[ Upstream commit b296955b3a740ecc8b3b08e34fd64f1ceabb8fb4 ]

Having an DRM_MODE_CONNECTOR_Unknown connector type is considered bad, and drm_panel_bridge_add_typed() and derivatives are deprecated for this.

drm_panel_init() won't prevent initializing a panel with a DRM_MODE_CONNECTOR_Unknown connector type. Luckily there are no in-tree users doing it, so take this as an opportinuty to document a valid connector type must be passed.

Returning an error if this rule is violated is not possible because drm_panel_init() is a void function. Add at least a warning to make any violations noticeable, especially to non-upstream drivers.

---
 drivers/gpu/drm/drm_panel.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_panel.c +4 -1
index 7fd3de89ed079..acd29b4f43f84 100644
@@ -49,7 +49,7 @@ static LIST_HEAD(panel_list);
  * @dev: parent device of the panel
  * @funcs: panel operations
  * @connector_type: the connector type (DRM_MODE_CONNECTOR_*) corresponding to
- *	the panel interface
+ *	the panel interface (must NOT be DRM_MODE_CONNECTOR_Unknown)
  *
  * Initialize the panel structure for subsequent registration with
  * drm_panel_add().
@@ -57,6 +57,9 @@ static LIST_HEAD(panel_list);
 void drm_panel_init(struct drm_panel *panel, struct device *dev,
 		    const struct drm_panel_funcs *funcs, int connector_type)
 {
+	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
+		DRM_WARN("%s: %s: a valid connector type is required!\n", __func__, dev_name(dev));
+
 	INIT_LIST_HEAD(&panel->list);
 	panel->dev = dev;
 	panel->funcs = funcs;
Signature · 1 line
2.39.5
author maintainer
#4 lore raw

PATCH 5/8 drm/amdkfd: clamp queue size to minimum

In reply to Sasha Levin

From: David Yat Sin <[email protected]>

[ Upstream commit e90711946b53590371ecce32e8fcc381a99d6333 ]

If queue size is less than minimum, clamp it to minimum to prevent underflow when writing queue mqd.

---
 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 10 ++++++++++
 include/uapi/linux/kfd_ioctl.h           |  2 ++
 2 files changed, 12 insertions(+)
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +10 -0
index 9a444b17530a4..869c8786df5c9 100644
@@ -190,6 +190,11 @@ static int set_queue_properties_from_user(struct queue_properties *q_properties,
 		return -EINVAL;
 	}
 
+	if (args->ring_size < KFD_MIN_QUEUE_RING_SIZE) {
+		args->ring_size = KFD_MIN_QUEUE_RING_SIZE;
+		pr_debug("Size lower. clamped to KFD_MIN_QUEUE_RING_SIZE");
+	}
+
 	if (!access_ok((const void __user *) args->read_pointer_address,
 			sizeof(uint32_t))) {
 		pr_err("Can't access read pointer\n");
@@ -394,6 +399,11 @@ static int kfd_ioctl_update_queue(struct file *filp, struct kfd_process *p,
 		return -EINVAL;
 	}
 
+	if (args->ring_size < KFD_MIN_QUEUE_RING_SIZE) {
+		args->ring_size = KFD_MIN_QUEUE_RING_SIZE;
+		pr_debug("Size lower. clamped to KFD_MIN_QUEUE_RING_SIZE");
+	}
+
 	properties.queue_address = args->ring_base_address;
 	properties.queue_size = args->ring_size;
 	properties.queue_percent = args->queue_percentage;
include/uapi/linux/kfd_ioctl.h +2 -0
index 695b606da4b15..94af84e845549 100644
@@ -47,6 +47,8 @@ struct kfd_ioctl_get_version_args {
 #define KFD_MAX_QUEUE_PERCENTAGE	100
 #define KFD_MAX_QUEUE_PRIORITY		15
 
+#define KFD_MIN_QUEUE_RING_SIZE		1024
+
 struct kfd_ioctl_create_queue_args {
 	__u64 ring_base_address;	/* to KFD */
 	__u64 write_pointer_address;	/* from KFD */
Signature · 1 line
2.39.5
author maintainer
#5 lore raw

PATCH 6/8 drm/amdkfd: Fix pqm_destroy_queue race with GPU reset

In reply to Sasha Levin

From: Philip Yang <[email protected]>

[ Upstream commit 7919b4cad5545ed93778f11881ceee72e4dbed66 ]

If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should delete the queue from process_queue_list and free the resource.

---
 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +1 -1
index 43c07ac2c6fce..cabe0012ab5b1 100644
@@ -384,7 +384,7 @@ int pqm_destroy_queue(struct process_queue_manager *pqm, unsigned int qid)
 			pr_err("Pasid 0x%x destroy queue %d failed, ret %d\n",
 				pqm->process->pasid,
 				pqn->q->properties.queue_id, retval);
-			if (retval != -ETIME)
+			if (retval != -ETIME && retval != -EIO)
 				goto err_destroy_queue;
 		}
 
Signature · 1 line
2.39.5
author maintainer
#6 lore raw

PATCH 7/8 drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off

In reply to Sasha Levin

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit 473c33f5ce651365468503c76f33158aaa1c7dd2 ]

In preparation for adding support for MT8195's HDMI reserved DPI, add calls to clk_prepare_enable() / clk_disable_unprepare() for the TVD clock: in this particular case, the aforementioned clock is not (and cannot be) parented to neither pixel or engine clocks hence it won't get enabled automatically by the clock framework.

Please note that on all of the currently supported MediaTek platforms, the TVD clock is always a parent of either pixel or engine clocks, and this means that the common clock framework is already enabling this clock before the children. On such platforms, this commit will only increase the refcount of the TVD clock without any functional change.

---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/gpu/drm/mediatek/mtk_dpi.c +9 -0
index aa3d472c79d77..ac75c10aed2f6 100644
@@ -369,6 +369,7 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
 
 	mtk_dpi_disable(dpi);
 	clk_disable_unprepare(dpi->pixel_clk);
+	clk_disable_unprepare(dpi->tvd_clk);
 	clk_disable_unprepare(dpi->engine_clk);
 }
 
@@ -385,6 +386,12 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 		goto err_refcount;
 	}
 
+	ret = clk_prepare_enable(dpi->tvd_clk);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
+		goto err_engine;
+	}
+
 	ret = clk_prepare_enable(dpi->pixel_clk);
 	if (ret) {
 		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
@@ -394,6 +401,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 	return 0;
 
 err_pixel:
+	clk_disable_unprepare(dpi->tvd_clk);
+err_engine:
 	clk_disable_unprepare(dpi->engine_clk);
 err_refcount:
 	dpi->refcount--;
Signature · 1 line
2.39.5
author maintainer
#7 lore raw

PATCH 8/8 fbdev: omapfb: Add 'plane' value check

In reply to Sasha Levin

From: Leonid Arapov <[email protected]>

[ Upstream commit 3e411827f31db7f938a30a3c7a7599839401ec30 ]

Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB of the enum parameter plane.

The value of this parameter is initialized in dss_init_overlays and in the current state of the code it cannot take this value so it's not a real problem.

For the purposes of defensive coding it wouldn't be superfluous to check the parameter value, because some functions down the call stack process this value correctly and some not.

For example, in dispc_ovl_setup_global_alpha it may lead to buffer overflow.

Add check for this value.

Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

---
 drivers/video/fbdev/omap2/omapfb/dss/dispc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/video/fbdev/omap2/omapfb/dss/dispc.c +5 -1
index b2d6e6df21615..d852bef1d507f 100644
@@ -2751,9 +2751,13 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		bool mem_to_mem)
 {
 	int r;
-	enum omap_overlay_caps caps = dss_feat_get_overlay_caps(plane);
+	enum omap_overlay_caps caps;
 	enum omap_channel channel;
 
+	if (plane == OMAP_DSS_WB)
+		return -EINVAL;
+
+	caps = dss_feat_get_overlay_caps(plane);
 	channel = dispc_ovl_get_channel_out(plane);
 
 	DSSDBG("dispc_ovl_setup %d, pa %pad, pa_uv %pad, sw %d, %d,%d, %dx%d ->"
Signature · 1 line
2.39.5
#8 lore raw

Re: [PATCH AUTOSEL 5.10 8/8] fbdev: omapfb: Add 'plane' value check

Hi!

Quoted 11 lines

Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB of the enum parameter plane.

The value of this parameter is initialized in dss_init_overlays and in the current state of the code it cannot take this value so it's not a real problem.

For the purposes of defensive coding it wouldn't be superfluous to check the parameter value, because some functions down the call stack process this value correctly and some not.

Quoted 7 lines

For example, in dispc_ovl_setup_global_alpha it may lead to buffer overflow.

Add check for this value.

Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

As changelog explains, this is robustness, not really a bug fix. We should not need it in -stable. (Or maybe rules file should be updated, because noone seems to be following this rule).

Best regards,
Pavel

Quoted 16 lines

+++ b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c

drivers/video/fbdev/omap2/omapfb/dss/dispc.c +5 -1
@@ -2751,9 +2751,13 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		bool mem_to_mem)
 {
 	int r;
-	enum omap_overlay_caps caps = dss_feat_get_overlay_caps(plane);
+	enum omap_overlay_caps caps;
 	enum omap_channel channel;
 
+	if (plane == OMAP_DSS_WB)
+		return -EINVAL;
+
+	caps = dss_feat_get_overlay_caps(plane);
 	channel = dispc_ovl_get_channel_out(plane);
 
 	DSSDBG("dispc_ovl_setup %d, pa %pad, pa_uv %pad, sw %d, %d,%d, %dx%d ->"
Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany