Skip to contentSkip to conversation

PM: sleep: Updates related to pm_suspend_target_state

PATCH In review Rafael J. Wysocki 4 participants 7 messages May 9, 2025

Subsystems (8)
DRM drivers x86 PCI Driver core +4 more subsystems
lore
Share & tools
lore
#0 lore raw

cover PM: sleep: Updates related to pm_suspend_target_state

Hi Everyone,

This allows PM debug messages to be printed during hibernation (again) in patch [1/3], adds pm_suspend_in_progress() for checking if a system suspend transition is in progress (which does not cover hibernation) on top of that (patch [2/3]), and adds pm_sleep_transition_in_progress() covering both system suspend and hibernation (patch [3/3]).

Thanks!

#1 lore raw

PATCH 1/3 PM: sleep: Print PM debug messages during hibernation

From: Rafael J. Wysocki <[email protected]>

Commit cdb8c100d8a4 ("include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume") caused PM debug messages to only be printed during system-wide suspend and resume in progress, but it forgot about hibernation.

Address this by adding a check for hibernation in progress to pm_debug_messages_should_print().

Fixes cdb8c100d8a4 ("include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume")
---
 kernel/power/hibernate.c |    5 +++++
 kernel/power/main.c      |    3 ++-
 kernel/power/power.h     |    4 ++++
 3 files changed, 11 insertions(+), 1 deletion(-)
kernel/power/hibernate.c +5 -0
@@ -90,6 +90,11 @@
 	atomic_inc(&hibernate_atomic);
 }
 
+bool hibernation_in_progress(void)
+{
+	return !atomic_read(&hibernate_atomic);
+}
+
 bool hibernation_available(void)
 {
 	return nohibernate == 0 &&
kernel/power/main.c +2 -1
@@ -613,7 +613,8 @@
 
 bool pm_debug_messages_should_print(void)
 {
-	return pm_debug_messages_on && pm_suspend_target_state != PM_SUSPEND_ON;
+	return pm_debug_messages_on && (hibernation_in_progress() ||
+		pm_suspend_target_state != PM_SUSPEND_ON);
 }
 EXPORT_SYMBOL_GPL(pm_debug_messages_should_print);
 
kernel/power/power.h +4 -0
@@ -71,10 +71,14 @@
 static inline void enable_restore_image_protection(void) {}
 #endif /* CONFIG_STRICT_KERNEL_RWX */
 
+extern bool hibernation_in_progress(void);
+
 #else /* !CONFIG_HIBERNATION */
 
 static inline void hibernate_reserved_size_init(void) {}
 static inline void hibernate_image_size_init(void) {}
+
+static inline bool hibernation_in_progress(void) { return false; }
 #endif /* !CONFIG_HIBERNATION */
 
 #define power_attr(_name) \
#2 lore raw

PATCH 2/3 PM: sleep: Introduce pm_suspend_in_progress()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Introduce pm_suspend_in_progress() to be used for checking if a system- wide suspend or resume transition is in progress, instead of comparing pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where applicable.

No intentional functional impact.

---

The only change in this patch that depends in the [1/3] is in kernel/power/main.c and it is not relevant for PCI/x86 and xe.

---
 arch/x86/pci/fixup.c        |    4 ++--
 drivers/base/power/wakeup.c |    2 +-
 drivers/gpu/drm/xe/xe_pm.c  |    2 +-
 include/linux/suspend.h     |    5 +++++
 kernel/power/main.c         |    4 ++--
 5 files changed, 11 insertions(+), 6 deletions(-)
arch/x86/pci/fixup.c +2 -2
@@ -970,13 +970,13 @@
 	struct pci_dev *rp;
 
 	/*
-	 * PM_SUSPEND_ON means we're doing runtime suspend, which means
+	 * If system suspend is not in progress, we're doing runtime suspend, so
 	 * amd-pmc will not be involved so PMEs during D3 work as advertised.
 	 *
 	 * The PMEs *do* work if amd-pmc doesn't put the SoC in the hardware
 	 * sleep state, but we assume amd-pmc is always present.
 	 */
-	if (pm_suspend_target_state == PM_SUSPEND_ON)
+	if (!pm_suspend_in_progress())
 		return;
 
 	rp = pcie_find_root_port(dev);
drivers/base/power/wakeup.c +1 -1
@@ -337,7 +337,7 @@
 	if (!dev || !dev->power.can_wakeup)
 		return -EINVAL;
 
-	if (pm_suspend_target_state != PM_SUSPEND_ON)
+	if (pm_suspend_in_progress())
 		dev_dbg(dev, "Suspicious %s() during system transition!\n", __func__);
 
 	ws = wakeup_source_register(dev, dev_name(dev));
drivers/gpu/drm/xe/xe_pm.c +1 -1
@@ -641,7 +641,7 @@
 
 	return dev->power.runtime_status == RPM_SUSPENDING ||
 		dev->power.runtime_status == RPM_RESUMING ||
-		pm_suspend_target_state != PM_SUSPEND_ON;
+		pm_suspend_in_progress();
 #else
 	return false;
 #endif
include/linux/suspend.h +5 -0
@@ -298,6 +298,11 @@
 static inline void s2idle_wake(void) {}
 #endif /* !CONFIG_SUSPEND */
 
+static inline bool pm_suspend_in_progress(void)
+{
+	return pm_suspend_target_state != PM_SUSPEND_ON;
+}
+
 /* struct pbe is used for creating lists of pages that should be restored
  * atomically during the resume from disk, because the page frames they have
  * occupied before the suspend are in use.
kernel/power/main.c +2 -2
@@ -613,8 +613,8 @@
 
 bool pm_debug_messages_should_print(void)
 {
-	return pm_debug_messages_on && (hibernation_in_progress() ||
-		pm_suspend_target_state != PM_SUSPEND_ON);
+	return pm_debug_messages_on && (pm_suspend_in_progress() ||
+		hibernation_in_progress());
 }
 EXPORT_SYMBOL_GPL(pm_debug_messages_should_print);
 
maintainer Reviewed-by Acked-by on v1 2/3
#3 lore raw

Re: [PATCH v1 2/3] PM: sleep: Introduce pm_suspend_in_progress()

Quoted 10 lines · Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Introduce pm_suspend_in_progress() to be used for checking if a system- wide suspend or resume transition is in progress, instead of comparing pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where applicable.

No intentional functional impact.

Quoted 9 lines

---

The only change in this patch that depends in the [1/3] is in kernel/power/main.c and it is not relevant for PCI/x86 and xe.

---
 arch/x86/pci/fixup.c        |    4 ++--
 drivers/base/power/wakeup.c |    2 +-
 drivers/gpu/drm/xe/xe_pm.c  |    2 +-

to merge this through your trees

Quoted 74 lines
 include/linux/suspend.h     |    5 +++++
 kernel/power/main.c         |    4 ++--
 5 files changed, 11 insertions(+), 6 deletions(-)
arch/x86/pci/fixup.c +2 -2
@@ -970,13 +970,13 @@
 	struct pci_dev *rp;
 
 	/*
-	 * PM_SUSPEND_ON means we're doing runtime suspend, which means
+	 * If system suspend is not in progress, we're doing runtime suspend, so
 	 * amd-pmc will not be involved so PMEs during D3 work as advertised.
 	 *
 	 * The PMEs *do* work if amd-pmc doesn't put the SoC in the hardware
 	 * sleep state, but we assume amd-pmc is always present.
 	 */
-	if (pm_suspend_target_state == PM_SUSPEND_ON)
+	if (!pm_suspend_in_progress())
 		return;
 
 	rp = pcie_find_root_port(dev);
drivers/base/power/wakeup.c +1 -1
@@ -337,7 +337,7 @@
 	if (!dev || !dev->power.can_wakeup)
 		return -EINVAL;
 
-	if (pm_suspend_target_state != PM_SUSPEND_ON)
+	if (pm_suspend_in_progress())
 		dev_dbg(dev, "Suspicious %s() during system transition!\n", __func__);
 
 	ws = wakeup_source_register(dev, dev_name(dev));
drivers/gpu/drm/xe/xe_pm.c +1 -1
@@ -641,7 +641,7 @@
 
 	return dev->power.runtime_status == RPM_SUSPENDING ||
 		dev->power.runtime_status == RPM_RESUMING ||
-		pm_suspend_target_state != PM_SUSPEND_ON;
+		pm_suspend_in_progress();
 #else
 	return false;
 #endif
include/linux/suspend.h +5 -0
@@ -298,6 +298,11 @@
 static inline void s2idle_wake(void) {}
 #endif /* !CONFIG_SUSPEND */
 
+static inline bool pm_suspend_in_progress(void)
+{
+	return pm_suspend_target_state != PM_SUSPEND_ON;
+}
+
 /* struct pbe is used for creating lists of pages that should be restored
  * atomically during the resume from disk, because the page frames they have
  * occupied before the suspend are in use.
kernel/power/main.c +2 -2
@@ -613,8 +613,8 @@
 
 bool pm_debug_messages_should_print(void)
 {
-	return pm_debug_messages_on && (hibernation_in_progress() ||
-		pm_suspend_target_state != PM_SUSPEND_ON);
+	return pm_debug_messages_on && (pm_suspend_in_progress() ||
+		hibernation_in_progress());
 }
 EXPORT_SYMBOL_GPL(pm_debug_messages_should_print);
 
Reviewed-by on v1 2/3
#4 lore raw

Re: [PATCH v1 2/3] PM: sleep: Introduce pm_suspend_in_progress()

In reply to Rafael J. Wysocki
Quoted 10 lines · Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Introduce pm_suspend_in_progress() to be used for checking if a system- wide suspend or resume transition is in progress, instead of comparing pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where applicable.

No intentional functional impact.

#5 lore raw

PATCH 3/3 PM: sleep: Introduce pm_sleep_transition_in_progress()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

The "suspend in progress" check in device_wakeup_enable() does not cover hibernation, but arguably it should do that, so introduce pm_sleep_transition_in_progress() covering transitions during both system suspend and hibernation to use in there and use it also in pm_debug_messages_should_print().

---
 drivers/base/power/wakeup.c |    2 +-
 include/linux/suspend.h     |    4 ++++
 kernel/power/main.c         |    8 ++++++--
 3 files changed, 11 insertions(+), 3 deletions(-)
drivers/base/power/wakeup.c +1 -1
@@ -337,7 +337,7 @@
 	if (!dev || !dev->power.can_wakeup)
 		return -EINVAL;
 
-	if (pm_suspend_in_progress())
+	if (pm_sleep_transition_in_progress())
 		dev_dbg(dev, "Suspicious %s() during system transition!\n", __func__);
 
 	ws = wakeup_source_register(dev, dev_name(dev));
include/linux/suspend.h +4 -0
@@ -475,6 +475,8 @@
 extern unsigned int lock_system_sleep(void);
 extern void unlock_system_sleep(unsigned int);
 
+extern bool pm_sleep_transition_in_progress(void);
+
 #else /* !CONFIG_PM_SLEEP */
 
 static inline int register_pm_notifier(struct notifier_block *nb)
@@ -503,6 +505,8 @@
 static inline unsigned int lock_system_sleep(void) { return 0; }
 static inline void unlock_system_sleep(unsigned int flags) {}
 
+static inline bool pm_sleep_transition_in_progress(void) { return false; }
+
 #endif /* !CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_PM_SLEEP_DEBUG
kernel/power/main.c +6 -2
@@ -609,12 +609,16 @@
 
 power_attr_ro(pm_wakeup_irq);
 
+bool pm_sleep_transition_in_progress(void)
+{
+	return pm_suspend_in_progress() || hibernation_in_progress();
+}
+
 bool pm_debug_messages_on __read_mostly;
 
 bool pm_debug_messages_should_print(void)
 {
-	return pm_debug_messages_on && (pm_suspend_in_progress() ||
-		hibernation_in_progress());
+	return pm_debug_messages_on && pm_sleep_transition_in_progress();
 }
 EXPORT_SYMBOL_GPL(pm_debug_messages_should_print);
 
Reviewed-by on the v1 series
#6 lore raw
In reply to Rafael J. Wysocki
Quoted 12 lines · Rafael J. Wysocki

Hi Everyone,

This allows PM debug messages to be printed during hibernation (again) in patch [1/3], adds pm_suspend_in_progress() for checking if a system suspend transition is in progress (which does not cover hibernation) on top of that (patch [2/3]), and adds pm_sleep_transition_in_progress() covering both system suspend and hibernation (patch [3/3]).

Thanks!

Thanks, LGTM!