dt-bindings: timer: Convert lsi,zevio-timer to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: timer: Convert lsi,zevio-timer to DT schema
Convert the TI NSPIRE Timer binding to DT schema format. It's a straight-forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../bindings/timer/lsi,zevio-timer.txt | 33 ----------- .../bindings/timer/lsi,zevio-timer.yaml | 56 +++++++++++++++++++ 2 files changed, 56 insertions(+), 33 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt create mode 100644 Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml
Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt deleted +0 -33
@@ -1,33 +0,0 @@ -TI-NSPIRE timer - -Required properties: - -- compatible : should be "lsi,zevio-timer". -- reg : The physical base address and size of the timer (always first). -- clocks: phandle to the source clock. - -Optional properties: - -- interrupts : The interrupt number of the first timer. -- reg : The interrupt acknowledgement registers - (always after timer base address) - -If any of the optional properties are not given, the timer is added as a -clock-source only. - -Example: - -timer { - compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; - interrupts = <19>; - clocks = <&timer_clk>; -}; - -Example (no clock-events): - -timer { - compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>; - clocks = <&timer_clk>; -};
Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml new file +56 -0
56 lines not on this page · raw message
Signature · 1 line
2.47.2
Daniel Lezcano
AppliedQuoted 5 lines · Rob Herring
Convert the TI NSPIRE Timer binding to DT schema format. It's a straight-forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>---
Applied, thanks
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
The following commit has been merged into the timers/clocksource branch of tip:
The following commit has been merged into the timers/clocksource branch of tip:
Commit-ID: e1e9fad1499c029e6052b13e9974f5cc2ccf7c89 Gitweb: https://git.kernel.org/tip/e1e9fad1499c029e6052b13e9974f5cc2ccf7c89 Author: Rob Herring (Arm) <[email protected]> AuthorDate: Mon, 05 May 2025 21:22:56 -05:00 Committer: Daniel Lezcano <[email protected]> CommitterDate: Fri, 16 May 2025 11:10:33 +02:00
dt-bindings: timer: Convert lsi,zevio-timer to DT schema
Convert the TI NSPIRE Timer binding to DT schema format. It's a straight-forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>
Signed-off-by Daniel Lezcano <[email protected]>
--- Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt | 33 +---- Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml | 56 +++++++- 2 files changed, 56 insertions(+), 33 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt create mode 100644 Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml
Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt deleted +0 -33
@@ -1,33 +0,0 @@ -TI-NSPIRE timer - -Required properties: - -- compatible : should be "lsi,zevio-timer". -- reg : The physical base address and size of the timer (always first). -- clocks: phandle to the source clock. - -Optional properties: - -- interrupts : The interrupt number of the first timer. -- reg : The interrupt acknowledgement registers - (always after timer base address) - -If any of the optional properties are not given, the timer is added as a -clock-source only. - -Example: - -timer { - compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; - interrupts = <19>; - clocks = <&timer_clk>; -}; - -Example (no clock-events): - -timer { - compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>; - clocks = <&timer_clk>; -};
Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml new file +56 -0
56 lines not on this page · raw message