u-boot-riscv/next
Hi Tom,
The following changes since commit d45b1d4ac94710f88902adc2173d7930700e2869:
Merge tag 'u-boot-dfu-next-20250602' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next (2025-06-02 08:43:10 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git next
for you to fetch changes up to b911af6d60d3be570469b92df751874dc376336b:
MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer (2025-06-03 14:17:46 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26483
----------------------------------------------------------------
- board: Convert Lichee Pi 4A to use S-Mode proper U-Boot
- RISC-V: configs: Raise SPL_SYS_MALLOC_SIZE to 8 MiB
- driver: Add SD card support to the Beagle-V-Fire
- MAINTAINERS: Add Yao Zi as maintainer for th1520
----------------------------------------------------------------
Eoin Dickson (2):
gpio: add PolarFire SoC GPIO and Core GPIO driver
spi: coreqspi: add xfer function for PolarFire SoC
Heinrich Schuchardt (1):
configs: raise SPL_SYS_MALLOC_SIZE to 8 MiB on RISC-V
Yao Zi (6):
riscv: cpu: th1520: Build spl.c for SPL only
riscv: cpu: th1520: Support cache enabling/disabling in M mode only
riscv: dts: th1520: Prepare binman configuration for loading OpenSBI
board: thead: licheepi4a: Run proper U-Boot in S-Mode
doc: thead: lpi4a: Update for S-Mode proper U-Boot support
MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer
MAINTAINERS | 7 ++ arch/riscv/cpu/th1520/Makefile | 2 +- arch/riscv/cpu/th1520/cache.c | 2 + arch/riscv/dts/thead-th1520-binman.dtsi | 32 +++++- common/spl/Kconfig | 2 +- configs/starfive_visionfive2_defconfig | 1 - configs/th1520_lpi4a_defconfig | 2 +- configs/xilinx_mbv32_defconfig | 1 - configs/xilinx_mbv32_smode_defconfig | 1 - configs/xilinx_mbv64_defconfig | 1 - configs/xilinx_mbv64_smode_defconfig | 1 - doc/board/thead/lpi4a.rst | 125 ++++++-------------- drivers/gpio/Kconfig | 5 + drivers/gpio/Makefile | 1 + drivers/gpio/mpfs_gpio.c | 198 ++++++++++++++++++++++++++++++++ drivers/spi/microchip_coreqspi.c | 113 +++++++++++++++++- 16 files changed, 391 insertions(+), 103 deletions(-) create mode 100644 drivers/gpio/mpfs_gpio.c
Best regards,
Leo
Quoted 14 lines · Leo Liang
Hi Tom,
The following changes since commit
d45b1d4ac94710f88902adc2173d7930700e2869:Merge tag 'u-boot-dfu-next-20250602' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next (2025-06-02 08:43:10 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git next
for you to fetch changes up to
b911af6d60d3be570469b92df751874dc376336b:
MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer (2025-06-03 14:17:46 +0800)
Quoted 7 lines
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26483
----------------------------------------------------------------
- board: Convert Lichee Pi 4A to use S-Mode proper U-Boot
- RISC-V: configs: RaiseSPL_SYS_MALLOC_SIZEto 8 MiB
- driver: Add SD card support to the Beagle-V-Fire
-MAINTAINERS: Add Yao Zi as maintainer for th1520
----------------------------------------------------------------
This introduces a failure to build on microchip_mpfs_icicle currently in -next.
Signature · 1 line
Tom
Quoted 24 lines · Tom Rini
Quoted 14 lines · Leo Liang
Hi Tom,
The following changes since commit
d45b1d4ac94710f88902adc2173d7930700e2869:Merge tag 'u-boot-dfu-next-20250602' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next (2025-06-02 08:43:10 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git next
for you to fetch changes up to
b911af6d60d3be570469b92df751874dc376336b:
MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer (2025-06-03 14:17:46 +0800)Quoted 7 lines
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26483
----------------------------------------------------------------
- board: Convert Lichee Pi 4A to use S-Mode proper U-Boot
- RISC-V: configs: RaiseSPL_SYS_MALLOC_SIZEto 8 MiB
- driver: Add SD card support to the Beagle-V-Fire
-MAINTAINERS: Add Yao Zi as maintainer for th1520
----------------------------------------------------------------
Quoted 2 lines
This introduces a failure to build on
microchip_mpfs_iciclecurrently in -next.
microchip_mpfs_icicle_defconfig fails to build in u-boot-riscv/next as well. Reverting b73971dea9fed ("spi: coreqspi: add xfer function for PolarFire SoC") fixes it.
Seems the patch doesn't adapt the multiple-cs-capable definition of dm_slave_plat, which was introduced in commit 34da258bb04 ("spi:
spi-uclass: Read chipselect and restrict capabilities") in the last year. Thus I doubt whether the patch has been built and tested against a recent version of U-Boot.
Quoted 2 lines
Signature · 1 line
Tom
Regards,
Yao Zi
Quoted 34 lines · Yao Zi
[EXTERNAL MAIL]
Quoted 24 lines · Tom Rini
Quoted 14 lines · Leo Liang
Hi Tom,
The following changes since commit
d45b1d4ac94710f88902adc2173d7930700e2869:Merge tag 'u-boot-dfu-next-20250602' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next (2025-06-02 08:43:10 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git next
for you to fetch changes up to
b911af6d60d3be570469b92df751874dc376336b:
MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer (2025-06-03 14:17:46 +0800)Quoted 7 lines
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26483
----------------------------------------------------------------
- board: Convert Lichee Pi 4A to use S-Mode proper U-Boot
- RISC-V: configs: RaiseSPL_SYS_MALLOC_SIZEto 8 MiB
- driver: Add SD card support to the Beagle-V-Fire
-MAINTAINERS: Add Yao Zi as maintainer for th1520
----------------------------------------------------------------Quoted 2 lines
This introduces a failure to build on
microchip_mpfs_iciclecurrently in -next.
microchip_mpfs_icicle_defconfigfails to build in u-boot-riscv/next as well. Revertingb73971dea9fed("spi: coreqspi: add xfer function for PolarFire SoC") fixes it.
Quoted 6 lines
Seems the patch doesn't adapt the multiple-cs-capable definition of
dm_slave_plat, which was introduced in commit34da258bb04("spi:
spi-uclass: Read chipselect and restrict capabilities") in the last year. Thus I doubt whether the patch has been built and tested against a recent version of U-Boot.
Sorry for the negligence.
I will respin a PR for next and
ask the submitter to send a fixed patch set.
Best regards,
Leo
Quoted 5 lines
Quoted 2 lines
--
TomRegards,
Yao Zi
Quoted 34 lines · Yao Zi
[EXTERNAL MAIL]
Quoted 24 lines · Tom Rini
Quoted 14 lines · Leo Liang
Hi Tom,
The following changes since commit
d45b1d4ac94710f88902adc2173d7930700e2869:Merge tag 'u-boot-dfu-next-20250602' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next (2025-06-02 08:43:10 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git next
for you to fetch changes up to
b911af6d60d3be570469b92df751874dc376336b:
MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer (2025-06-03 14:17:46 +0800)Quoted 7 lines
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26483
----------------------------------------------------------------
- board: Convert Lichee Pi 4A to use S-Mode proper U-Boot
- RISC-V: configs: RaiseSPL_SYS_MALLOC_SIZEto 8 MiB
- driver: Add SD card support to the Beagle-V-Fire
-MAINTAINERS: Add Yao Zi as maintainer for th1520
----------------------------------------------------------------Quoted 2 lines
This introduces a failure to build on
microchip_mpfs_iciclecurrently in -next.
microchip_mpfs_icicle_defconfigfails to build in u-boot-riscv/next as well. Revertingb73971dea9fed("spi: coreqspi: add xfer function for PolarFire SoC") fixes it.
Quoted 6 lines
Seems the patch doesn't adapt the multiple-cs-capable definition of
dm_slave_plat, which was introduced in commit34da258bb04("spi:
spi-uclass: Read chipselect and restrict capabilities") in the last year. Thus I doubt whether the patch has been built and tested against a recent version of U-Boot.
Hi Eoin,
Your patch ("spi: coreqspi: add xfer function for PolarFire SoC")[1] does not pass CI[2].
Could you fix this issue and resend a V3?
Best regards,
Leo
[1] https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
[2] https://source.denx.de/u-boot/custodians/u-boot-riscv/-/jobs/1155749#L5205
Quoted 6 lines
Quoted 3 lines
--
TomRegards,
Yao Zi