block: restore two stage elevator switch while running nr_hw_queue update
PATCH v2 1/1 block: restore two stage elevator switch while running nr_hw_queue update
The kmemleak reports memory leaks related to elevator resources that were originally allocated in the ->init_hctx() method. The following leak traces are observed after running blktests:
unreferenced object 0xffff8881b82f7400 (size 512):
comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f6000 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f5800 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7eThe issue arises while we run nr_hw_queue update, Specifically, we first reallocate hardware contexts (hctx) via __blk_mq_realloc_hw_ctxs(), and then later invoke elevator_switch() (assuming q->elevator is not NULL). The elevator switch code would first exit old elevator (elevator_exit) and then switches to the new elevator. The elevator_exit loops through each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(), which releases resources allocated during ->init_hctx().
This memleak manifests when we reduce the num of h/w queues - for example, when the initial update sets the number of queues to X, and a later update reduces it to Y, where Y < X. In this case, we'd loose the access to old hctxs while we get to elevator exit code because __blk_mq_realloc_hw_ctxs would have already released the old hctxs. As we don't now have any reference left to the old hctxs, we don't have any way to free the scheduler resources (which are allocate in ->init_hctx()) and kmemleak complains about it.
This issue was caused due to the commit 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues"). That change unified the two-stage elevator teardown and reattachment into a single call that occurs after __blk_mq_realloc_hw_ctxs() has already freed the hctxs.
This patch restores the previous two-stage elevator switch logic during nr_hw_queues updates. First, the elevator is switched to 'none', which ensures all scheduler resources are properly freed. Then, the hardware contexts (hctxs) are reallocated, and the software-to-hardware queue mappings are updated. Finally, the original elevator is reattached. This sequence prevents loss of references to old hctxs and avoids the scheduler resource leaks reported by kmemleak.
---
Changes from v1:
- Updated commit message with kmemleak trace generated using null-blk (Yi Zhang)
- The elevator module could be removed while nr_hw_queue update is running, so protect elevator switch using elevator_get() and elevator_put() (Ming Lei)
- Invoke elv_update_nr_hw_queues() from blk_mq_elv_switch_back() and that way avoid elevator code restructuring in a patch which fixes a regression. (Ming Lei)
--- block/blk-mq.c | 86 +++++++++++++++++++++++++++++++++++++++++++----- block/blk.h | 2 +- block/elevator.c | 6 ++-- 3 files changed, 81 insertions(+), 13 deletions(-)
block/blk-mq.c +77 -9
@@ -4966,6 +4966,62 @@ int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr)return ret; } +/* +* Switch back to the elevator type stored in the xarray. +*/ +static void blk_mq_elv_switch_back (struct request_queue *q, +struct xarray *elv_tbl) +{ +struct elevator_type *e =xa_load (elv_tbl, q->id); + +/* The elv_update_nr_hw_queues unfreezes the queue. */ +elv_update_nr_hw_queues (q, e); + +/* Drop the reference acquired in blk_mq_elv_switch_none. */ +if (e) +elevator_put (e); +} + +/* +* Stores elevator type in xarray and set current elevator to none. It uses +* q->id as an index to store the elevator type into the xarray. +*/ +static int blk_mq_elv_switch_none (struct request_queue *q, +struct xarray *elv_tbl) +{ +int ret =0 ; + +lockdep_assert_held_write (&q->tag_set->update_nr_hwq_lock); + +/* +* Accessing q->elevator without holding q->elevator_lock is safe here +* because we're called from nr_hw_queue update which is protected by +* set->update_nr_hwq_lock in the writer context. So, scheduler update/ +* switch code (which acquires the same lock in the reader context) +* can't run concurrently. +*/ +if (q->elevator) { + + ret =xa_insert (elv_tbl, q->id, q->elevator->type,GFP_KERNEL ); +if (ret) { +WARN_ON_ONCE (1 ); + goto out; + } +/* +* Before we switch elevator to 'none', take a reference to +* the elevator module so that while nr_hw_queue update is +* running, no one can remove elevator module. We'd put the +* reference to elevator module later when we switch back +* elevator. +*/ +__elevator_get (q->elevator->type); + +elevator_set_none (q); + } +out: +return ret; +} +static void __blk_mq_update_nr_hw_queues (struct blk_mq_tag_set *set,int nr_hw_queues) {
@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,int prev_nr_hw_queues = set->nr_hw_queues;unsigned int memflags;int i; +struct xarray elv_tbl;lockdep_assert_held (&set->tag_list_lock);
@@ -4984,6 +5041,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,return ; memflags =memalloc_noio_save (); + +xa_init (&elv_tbl); +list_for_each_entry (q, &set->tag_list, tag_set_list) {blk_mq_debugfs_unregister_hctxs (q);blk_mq_sysfs_unregister_hctxs (q);
@@ -4992,11 +5052,17 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,list_for_each_entry (q, &set->tag_list, tag_set_list)blk_mq_freeze_queue_nomemsave (q); -if (blk_mq_realloc_tag_set_tags (set, nr_hw_queues) <0 ) { -list_for_each_entry (q, &set->tag_list, tag_set_list) -blk_mq_unfreeze_queue_nomemrestore (q); - goto reregister; - } +/* +* Switch IO scheduler to 'none', cleaning up the data associated +* with the previous scheduler. We will switch back once we are done +* updating the new sw to hw queue mappings. +*/ +list_for_each_entry (q, &set->tag_list, tag_set_list) +if (blk_mq_elv_switch_none (q, &elv_tbl)) + goto switch_back; + +if (blk_mq_realloc_tag_set_tags (set, nr_hw_queues) <0 ) + goto switch_back; fallback:blk_mq_update_queue_map (set);
@@ -5016,12 +5082,11 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, }blk_mq_map_swqueue (q); } - -/* elv_update_nr_hw_queues() unfreeze queue for us */ +switch_back: +/* The blk_mq_elv_switch_back unfreezes queue for us. */ list_for_each_entry (q, &set->tag_list, tag_set_list) -elv_update_nr_hw_queues (q); +blk_mq_elv_switch_back (q, &elv_tbl); -reregister:list_for_each_entry (q, &set->tag_list, tag_set_list) {blk_mq_sysfs_register_hctxs (q);blk_mq_debugfs_register_hctxs (q);
@@ -5029,6 +5094,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,blk_mq_remove_hw_queues_cpuhp (q);blk_mq_add_hw_queues_cpuhp (q); } + +xa_destroy (&elv_tbl); +memalloc_noio_restore (memflags);/* Free the excess tags when nr_hw_queues shrink. */
block/blk.h +1 -1
@@ -321,7 +321,7 @@ bool blk_bio_list_merge(struct request_queue *q, struct list_head *list,bool blk_insert_flush (struct request *rq); -void elv_update_nr_hw_queues (struct request_queue *q); +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e);void elevator_set_default (struct request_queue *q);void elevator_set_none (struct request_queue *q);
block/elevator.c +3 -3
@@ -689,7 +689,7 @@ static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx)* The I/O scheduler depends on the number of hardware queues, this forces a * reattachment when nr_hw_queues changes. */ -void elv_update_nr_hw_queues (struct request_queue *q) +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e) {struct elv_change_ctx ctx = {};int ret = -ENODEV ;
@@ -697,8 +697,8 @@ void elv_update_nr_hw_queues(struct request_queue *q)WARN_ON_ONCE (q->mq_freeze_depth ==0 );mutex_lock (&q->elevator_lock); -if (q->elevator && !blk_queue_dying (q) &&blk_queue_registered (q)) { - ctx.name = q->elevator->type->elevator_name; +if (e && !blk_queue_dying (q) &&blk_queue_registered (q)) { + ctx.name = e->elevator_name;/* force to reattach elevator after nr_hw_queue is updated */ ret =elevator_switch (q, &ctx);
Signature · 1 line
2.50.1
Quoted 212 lines · Nilay Shroff
The kmemleak reports memory leaks related to elevator resources that were originally allocated in the ->init_hctx() method. The following leak traces are observed after running blktests:
unreferenced object
0xffff8881b82f7400(size 512):
comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes):00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881b82f6000 (size 512): comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881b82f5800 (size 512): comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe issue arises while we run
nr_hw_queueupdate, Specifically, we first reallocate hardware contexts (hctx) via__blk_mq_realloc_hw_ctxs(), and then later invokeelevator_switch()(assumingq->elevatoris not NULL). The elevator switch code would first exit old elevator (elevator_exit) and then switches to the new elevator. Theelevator_exitloops through each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(), which releases resources allocated during ->init_hctx().This memleak manifests when we reduce the num of h/w queues - for example, when the initial update sets the number of queues to X, and a later update reduces it to Y, where Y < X. In this case, we'd loose the access to old hctxs while we get to elevator exit code because
__blk_mq_realloc_hw_ctxswould have already released the old hctxs. As we don't now have any reference left to the old hctxs, we don't have any way to free the scheduler resources (which are allocate in ->init_hctx()) and kmemleak complains about it.This issue was caused due to the commit
596dce110b7d("block: simplify elevator reattachment for updatingnr_hw_queues"). That change unified the two-stage elevator teardown and reattachment into a single call that occurs after__blk_mq_realloc_hw_ctxs()has already freed the hctxs.This patch restores the previous two-stage elevator switch logic during
nr_hw_queuesupdates. First, the elevator is switched to 'none', which ensures all scheduler resources are properly freed. Then, the hardware contexts (hctxs) are reallocated, and the software-to-hardware queue mappings are updated. Finally, the original elevator is reattached. This sequence prevents loss of references to old hctxs and avoids the scheduler resource leaks reported by kmemleak.Reported-by Yi Zhang <[email protected]>Fixes 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")Closes https://lore.kernel.org/all/CAHj4cs8oJFvz=daCvjHM5dYCNQH4UXwSySPPU4v-WHce_kZXZA@mail.gmail.com/ open hereSigned-off-by Nilay Shroff <[email protected]>---
Changes from v1:
- Updated commit message with kmemleak trace generated using null-blk (Yi Zhang)
- The elevator module could be removed whilenr_hw_queueupdate is running, so protect elevator switch usingelevator_get()andelevator_put()(Ming Lei)
- Invokeelv_update_nr_hw_queues()fromblk_mq_elv_switch_back()and that way avoid elevator code restructuring in a patch which fixes a regression. (Ming Lei)--- block/blk-mq.c | 86 +++++++++++++++++++++++++++++++++++++++++++----- block/blk.h | 2 +- block/elevator.c | 6 ++-- 3 files changed, 81 insertions(+), 13 deletions(-)block/blk-mq.c +60
-3@@ -4966,6 +4966,62 @@ int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr)return ret; } +/* +* Switch back to the elevator type stored in the xarray. +*/ +static void blk_mq_elv_switch_back (struct request_queue *q, +struct xarray *elv_tbl) +{ +struct elevator_type *e =xa_load (elv_tbl, q->id); + +/* The elv_update_nr_hw_queues unfreezes the queue. */ +elv_update_nr_hw_queues (q, e); + +/* Drop the reference acquired in blk_mq_elv_switch_none. */ +if (e) +elevator_put (e); +} + +/* +* Stores elevator type in xarray and set current elevator to none. It uses +* q->id as an index to store the elevator type into the xarray. +*/ +static int blk_mq_elv_switch_none (struct request_queue *q, +struct xarray *elv_tbl) +{ +int ret =0 ; + +lockdep_assert_held_write (&q->tag_set->update_nr_hwq_lock); + +/* +* Accessing q->elevator without holding q->elevator_lock is safe here +* because we're called from nr_hw_queue update which is protected by +* set->update_nr_hwq_lock in the writer context. So, scheduler update/ +* switch code (which acquires the same lock in the reader context) +* can't run concurrently. +*/ +if (q->elevator) { + + ret =xa_insert (elv_tbl, q->id, q->elevator->type,GFP_KERNEL ); +if (ret) { +WARN_ON_ONCE (1 ); + goto out; + } +/* +* Before we switch elevator to 'none', take a reference to +* the elevator module so that while nr_hw_queue update is +* running, no one can remove elevator module. We'd put the +* reference to elevator module later when we switch back +* elevator. +*/ +__elevator_get (q->elevator->type); + +elevator_set_none (q); + } +out: +return ret; +} +static void __blk_mq_update_nr_hw_queues (struct blk_mq_tag_set *set,int nr_hw_queues) {@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,int prev_nr_hw_queues = set->nr_hw_queues;unsigned int memflags;int i; +struct xarray elv_tbl;lockdep_assert_held (&set->tag_list_lock);@@ -4984,6 +5041,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,return ; memflags =memalloc_noio_save (); + +xa_init (&elv_tbl); +list_for_each_entry (q, &set->tag_list, tag_set_list) {blk_mq_debugfs_unregister_hctxs (q);blk_mq_sysfs_unregister_hctxs (q);@@ -4992,11 +5052,17 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,list_for_each_entry (q, &set->tag_list, tag_set_list)blk_mq_freeze_queue_nomemsave (q); -if (blk_mq_realloc_tag_set_tags (set, nr_hw_queues) <0 ) { -list_for_each_entry (q, &set->tag_list, tag_set_list) -blk_mq_unfreeze_queue_nomemrestore (q);
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5062
Quoted 10 lines
block/blk-mq.c +8
-2- goto reregister; - } +/* +* Switch IO scheduler to 'none', cleaning up the data associated +* with the previous scheduler. We will switch back once we are done +* updating the new sw to hw queue mappings. +*/ +list_for_each_entry (q, &set->tag_list, tag_set_list) +if (blk_mq_elv_switch_none (q, &elv_tbl)) + goto switch_back;
The partial switch_back need to be careful. If switching to none is failed for one queue, the other remained will be switched back to none no matter if the previous scheduler is none or not. Maybe return type of blk_mq_elv_switch_none() can be defined as 'void' simply for avoiding the trouble.
Otherwise, this patch looks fine.
Thanks,
Ming
Quoted 221 lines · Ming Lei
Quoted 220 lines · Nilay Shroff
The kmemleak reports memory leaks related to elevator resources that were originally allocated in the ->init_hctx() method. The following leak traces are observed after running blktests:
unreferenced object
0xffff8881b82f7400(size 512):
comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes):00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881b82f6000 (size 512): comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881b82f5800 (size 512): comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe issue arises while we run
nr_hw_queueupdate, Specifically, we first reallocate hardware contexts (hctx) via__blk_mq_realloc_hw_ctxs(), and then later invokeelevator_switch()(assumingq->elevatoris not NULL). The elevator switch code would first exit old elevator (elevator_exit) and then switches to the new elevator. Theelevator_exitloops through each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(), which releases resources allocated during ->init_hctx().This memleak manifests when we reduce the num of h/w queues - for example, when the initial update sets the number of queues to X, and a later update reduces it to Y, where Y < X. In this case, we'd loose the access to old hctxs while we get to elevator exit code because
__blk_mq_realloc_hw_ctxswould have already released the old hctxs. As we don't now have any reference left to the old hctxs, we don't have any way to free the scheduler resources (which are allocate in ->init_hctx()) and kmemleak complains about it.This issue was caused due to the commit
596dce110b7d("block: simplify elevator reattachment for updatingnr_hw_queues"). That change unified the two-stage elevator teardown and reattachment into a single call that occurs after__blk_mq_realloc_hw_ctxs()has already freed the hctxs.This patch restores the previous two-stage elevator switch logic during
nr_hw_queuesupdates. First, the elevator is switched to 'none', which ensures all scheduler resources are properly freed. Then, the hardware contexts (hctxs) are reallocated, and the software-to-hardware queue mappings are updated. Finally, the original elevator is reattached. This sequence prevents loss of references to old hctxs and avoids the scheduler resource leaks reported by kmemleak.Reported-by Yi Zhang <[email protected]>Fixes 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")Closes https://lore.kernel.org/all/CAHj4cs8oJFvz=daCvjHM5dYCNQH4UXwSySPPU4v-WHce_kZXZA@mail.gmail.com/ open hereSigned-off-by Nilay Shroff <[email protected]>---
Changes from v1:
- Updated commit message with kmemleak trace generated using null-blk (Yi Zhang)
- The elevator module could be removed whilenr_hw_queueupdate is running, so protect elevator switch usingelevator_get()andelevator_put()(Ming Lei)
- Invokeelv_update_nr_hw_queues()fromblk_mq_elv_switch_back()and that way avoid elevator code restructuring in a patch which fixes a regression. (Ming Lei)--- block/blk-mq.c | 86 +++++++++++++++++++++++++++++++++++++++++++----- block/blk.h | 2 +- block/elevator.c | 6 ++-- 3 files changed, 81 insertions(+), 13 deletions(-)block/blk-mq.c +66
-5@@ -4966,6 +4966,62 @@ int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr)return ret; } +/* +* Switch back to the elevator type stored in the xarray. +*/ +static void blk_mq_elv_switch_back (struct request_queue *q, +struct xarray *elv_tbl) +{ +struct elevator_type *e =xa_load (elv_tbl, q->id); + +/* The elv_update_nr_hw_queues unfreezes the queue. */ +elv_update_nr_hw_queues (q, e); + +/* Drop the reference acquired in blk_mq_elv_switch_none. */ +if (e) +elevator_put (e); +} + +/* +* Stores elevator type in xarray and set current elevator to none. It uses +* q->id as an index to store the elevator type into the xarray. +*/ +static int blk_mq_elv_switch_none (struct request_queue *q, +struct xarray *elv_tbl) +{ +int ret =0 ; + +lockdep_assert_held_write (&q->tag_set->update_nr_hwq_lock); + +/* +* Accessing q->elevator without holding q->elevator_lock is safe here +* because we're called from nr_hw_queue update which is protected by +* set->update_nr_hwq_lock in the writer context. So, scheduler update/ +* switch code (which acquires the same lock in the reader context) +* can't run concurrently. +*/ +if (q->elevator) { + + ret =xa_insert (elv_tbl, q->id, q->elevator->type,GFP_KERNEL ); +if (ret) { +WARN_ON_ONCE (1 ); + goto out; + } +/* +* Before we switch elevator to 'none', take a reference to +* the elevator module so that while nr_hw_queue update is +* running, no one can remove elevator module. We'd put the +* reference to elevator module later when we switch back +* elevator. +*/ +__elevator_get (q->elevator->type); + +elevator_set_none (q); + } +out: +return ret; +} +static void __blk_mq_update_nr_hw_queues (struct blk_mq_tag_set *set,int nr_hw_queues) {@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,int prev_nr_hw_queues = set->nr_hw_queues;unsigned int memflags;int i; +struct xarray elv_tbl;lockdep_assert_held (&set->tag_list_lock);@@ -4984,6 +5041,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,return ; memflags =memalloc_noio_save (); + +xa_init (&elv_tbl); +list_for_each_entry (q, &set->tag_list, tag_set_list) {blk_mq_debugfs_unregister_hctxs (q);blk_mq_sysfs_unregister_hctxs (q);@@ -4992,11 +5052,17 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,list_for_each_entry (q, &set->tag_list, tag_set_list)blk_mq_freeze_queue_nomemsave (q); -if (blk_mq_realloc_tag_set_tags (set, nr_hw_queues) <0 ) { -list_for_each_entry (q, &set->tag_list, tag_set_list) -blk_mq_unfreeze_queue_nomemrestore (q); - goto reregister; - } +/* +* Switch IO scheduler to 'none', cleaning up the data associated +* with the previous scheduler. We will switch back once we are done +* updating the new sw to hw queue mappings. +*/ +list_for_each_entry (q, &set->tag_list, tag_set_list)
Quoted 9 lines
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5062
Quoted 2 lines
block/blk-mq.c +2
-0+if (blk_mq_elv_switch_none (q, &elv_tbl)) + goto switch_back;The partial
switch_backneed to be careful. If switching to none is failed for one queue, the other remained will be switched back to none no matter if the previous scheduler is none or not. Maybe return type ofblk_mq_elv_switch_none()can be defined as 'void' simply for avoiding the trouble.
Hmm, maybe not. I think in the case of a partial failure while switching the scheduler to 'none', only those queues whose scheduler was actually switched to 'none' would be switched back to their previous scheduler.
Let's consider an example scenario:
We have three queues — q1, q2, and q3 — all sharing the same tagset.
Initially:
- q1 uses scheduler s1
- q2 uses scheduler s2
- q3 uses scheduler s3
Now, during the nr_hw_queue update, we invoke blk_mq_elv_switch_none() to temporarily switch all schedulers to 'none'. Suppose the switch fails specifically for q3. In this case:
- q1 and q2 successfully switched to 'none'
- q3 remains with its original scheduler s3
- We save the original scheduler mappings in an xarray as follows:
x[q1->id] = s1
x[q2->id] = s2
x[q3->id] = 0 // Indicates no change was made
Since the switch failed for q3, we then invoke blk_mq_elv_switch_back(), which internally calls elv_update_nr_hw_queues() to restore the previous schedulers:
For q1: x[q1->id] = s1 => scheduler is restored to s1
For q2: x[q2->id] = s2 => scheduler is restored to s2
For q3: x[q3->id] = 0 => no scheduler switch attempted, q3 continues to use s3
So based on this flow, the current implementation appears to correctly handle partial failures — only those queues that were successfully switched to 'none' are switched back.
Let me know if you think there's a scenario where this logic might still break.
Thanks,
--Nilay
Hi,
Quoted 159 lines · Nilay Shroff
The kmemleak reports memory leaks related to elevator resources that were originally allocated in the ->init_hctx() method. The following leak traces are observed after running blktests:
unreferenced object
0xffff8881b82f7400(size 512):comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881b82f6000 (size 512): comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881b82f5800 (size 512): comm "check", pid 68454, jiffies 4310588881 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 5bac8b34): __kvmalloc_node_noprof+0x55d/0x7a0 sbitmap_init_node+0x15a/0x6a0 kyber_init_hctx+0x316/0xb90 blk_mq_init_sched+0x419/0x580 elevator_switch+0x18b/0x630 elv_update_nr_hw_queues+0x219/0x2c0 __blk_mq_update_nr_hw_queues+0x36a/0x6f0 blk_mq_update_nr_hw_queues+0x3a/0x60 0xffffffffc09ceb80 0xffffffffc09d7e0b configfs_write_iter+0x2b1/0x470 vfs_write+0x527/0xe70 ksys_write+0xff/0x200 do_syscall_64+0x98/0x3c0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe issue arises while we run
nr_hw_queueupdate, Specifically, we first reallocate hardware contexts (hctx) via__blk_mq_realloc_hw_ctxs(), and then later invokeelevator_switch()(assumingq->elevatoris not NULL). The elevator switch code would first exit old elevator (elevator_exit) and then switches to the new elevator. Theelevator_exitloops through each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(), which releases resources allocated during ->init_hctx().This memleak manifests when we reduce the num of h/w queues - for example, when the initial update sets the number of queues to X, and a later update reduces it to Y, where Y < X. In this case, we'd loose the access to old hctxs while we get to elevator exit code because
__blk_mq_realloc_hw_ctxswould have already released the old hctxs. As we don't now have any reference left to the old hctxs, we don't have any way to free the scheduler resources (which are allocate in ->init_hctx()) and kmemleak complains about it.This issue was caused due to the commit
596dce110b7d("block: simplify elevator reattachment for updatingnr_hw_queues"). That change unified the two-stage elevator teardown and reattachment into a single call that occurs after__blk_mq_realloc_hw_ctxs()has already freed the hctxs.This patch restores the previous two-stage elevator switch logic during
nr_hw_queuesupdates. First, the elevator is switched to 'none', which ensures all scheduler resources are properly freed. Then, the hardware contexts (hctxs) are reallocated, and the software-to-hardware queue mappings are updated. Finally, the original elevator is reattached. This sequence prevents loss of references to old hctxs and avoids the scheduler resource leaks reported by kmemleak.Reported-by Yi Zhang <[email protected]>Fixes 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")Closes https://lore.kernel.org/all/CAHj4cs8oJFvz=daCvjHM5dYCNQH4UXwSySPPU4v-WHce_kZXZA@mail.gmail.com/ open hereSigned-off-by Nilay Shroff <[email protected]>---
Changes from v1:
- Updated commit message with kmemleak trace generated using null-blk (Yi Zhang)
- The elevator module could be removed whilenr_hw_queueupdate is running, so protect elevator switch usingelevator_get()andelevator_put()(Ming Lei)
- Invokeelv_update_nr_hw_queues()fromblk_mq_elv_switch_back()and that way avoid elevator code restructuring in a patch which fixes a regression. (Ming Lei)--- block/blk-mq.c | 86 +++++++++++++++++++++++++++++++++++++++++++----- block/blk.h | 2 +- block/elevator.c | 6 ++-- 3 files changed, 81 insertions(+), 13 deletions(-)block/blk-mq.c +31
-0@@ -4966,6 +4966,62 @@ int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr)return ret; } +/* +* Switch back to the elevator type stored in the xarray. +*/ +static void blk_mq_elv_switch_back (struct request_queue *q, +struct xarray *elv_tbl) +{ +struct elevator_type *e =xa_load (elv_tbl, q->id); + +/* The elv_update_nr_hw_queues unfreezes the queue. */ +elv_update_nr_hw_queues (q, e); + +/* Drop the reference acquired in blk_mq_elv_switch_none. */ +if (e) +elevator_put (e); +} + +/* +* Stores elevator type in xarray and set current elevator to none. It uses +* q->id as an index to store the elevator type into the xarray. +*/ +static int blk_mq_elv_switch_none (struct request_queue *q, +struct xarray *elv_tbl) +{ +int ret =0 ; + +lockdep_assert_held_write (&q->tag_set->update_nr_hwq_lock); + +/* +* Accessing q->elevator without holding q->elevator_lock is safe here +* because we're called from nr_hw_queue update which is protected by +* set->update_nr_hwq_lock in the writer context. So, scheduler update/
block/blk-mq.c int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr) · line 5009
Quoted 10 lines
block/blk-mq.c +10
-0+* switch code (which acquires the same lock in the reader context) +* can't run concurrently. +*/ +if (q->elevator) { + + ret =xa_insert (elv_tbl, q->id, q->elevator->type,GFP_KERNEL ); +if (ret) { +WARN_ON_ONCE (1 ); + goto out; + }
Perhaps this is simpler, remove the out tag and return directly:
if (WARN_ON_ONCE(ret))
return ret;
And BTW, I feel the warning is not necessary here for small memory allocation failure.
Quoted 19 lines
block/blk-mq.c +15
-0+/* +* Before we switch elevator to 'none', take a reference to +* the elevator module so that while nr_hw_queue update is +* running, no one can remove elevator module. We'd put the +* reference to elevator module later when we switch back +* elevator. +*/ +__elevator_get (q->elevator->type); + +elevator_set_none (q); + } +out: +return ret; +} +static void __blk_mq_update_nr_hw_queues (struct blk_mq_tag_set *set,int nr_hw_queues) {
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5032
Quoted 4 lines
block/blk-mq.c +1
-0@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,int prev_nr_hw_queues = set->nr_hw_queues;unsigned int memflags;int i; +struct xarray elv_tbl;
Perhaps:
DEFINE_XARRAY(elv_tbl)
Quoted 20 lines
block/blk-mq.c +3
-3lockdep_assert_held (&set->tag_list_lock);@@ -4984,6 +5041,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,return ; memflags =memalloc_noio_save (); + +xa_init (&elv_tbl); +list_for_each_entry (q, &set->tag_list, tag_set_list) {blk_mq_debugfs_unregister_hctxs (q);blk_mq_sysfs_unregister_hctxs (q);@@ -4992,11 +5052,17 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,list_for_each_entry (q, &set->tag_list, tag_set_list)blk_mq_freeze_queue_nomemsave (q); -if (blk_mq_realloc_tag_set_tags (set, nr_hw_queues) <0 ) { -list_for_each_entry (q, &set->tag_list, tag_set_list) -blk_mq_unfreeze_queue_nomemrestore (q);
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5062
Quoted 10 lines
block/blk-mq.c +8
-2- goto reregister; - } +/* +* Switch IO scheduler to 'none', cleaning up the data associated +* with the previous scheduler. We will switch back once we are done +* updating the new sw to hw queue mappings. +*/ +list_for_each_entry (q, &set->tag_list, tag_set_list) +if (blk_mq_elv_switch_none (q, &elv_tbl)) + goto switch_back;
Can we move the freeze queue into blk_mq_elv_switch_none? To corresponding with unfreeze queue in blk_mq_elv_switch_back().
Quoted 50 lines
block/blk-mq.c +9
-4+ +if (blk_mq_realloc_tag_set_tags (set, nr_hw_queues) <0 ) + goto switch_back; fallback:blk_mq_update_queue_map (set);@@ -5016,12 +5082,11 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, }blk_mq_map_swqueue (q); } - -/* elv_update_nr_hw_queues() unfreeze queue for us */ +switch_back: +/* The blk_mq_elv_switch_back unfreezes queue for us. */ list_for_each_entry (q, &set->tag_list, tag_set_list) -elv_update_nr_hw_queues (q); +blk_mq_elv_switch_back (q, &elv_tbl); -reregister:list_for_each_entry (q, &set->tag_list, tag_set_list) {blk_mq_sysfs_register_hctxs (q);blk_mq_debugfs_register_hctxs (q);@@ -5029,6 +5094,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,blk_mq_remove_hw_queues_cpuhp (q);blk_mq_add_hw_queues_cpuhp (q); } + +xa_destroy (&elv_tbl); +memalloc_noio_restore (memflags);/* Free the excess tags when nr_hw_queues shrink. */ block/blk.h +1
-1@@ -321,7 +321,7 @@ bool blk_bio_list_merge(struct request_queue *q, struct list_head *list,bool blk_insert_flush (struct request *rq); -void elv_update_nr_hw_queues (struct request_queue *q); +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e);void elevator_set_default (struct request_queue *q);void elevator_set_none (struct request_queue *q);block/elevator.c +0
-0
block/elevator.c static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx) · line 692
Quoted 5 lines
block/elevator.c +1
-1@@ -689,7 +689,7 @@ static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx)* The I/O scheduler depends on the number of hardware queues, this forces a * reattachment when nr_hw_queues changes. */ -void elv_update_nr_hw_queues (struct request_queue *q) +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e)
Now that this function no longer just update nr_hw_queues, but switch elevator from none to e, this name will be confusing. Since there is just one caller from blk_mq_update_nr_hw_queues(), I feel it's better to move the implematation to blk_mq_elv_switch_back() directly.
block/elevator.c void elv_update_nr_hw_queues(struct request_queue *q) · line 701
Quoted 11 lines
block/elevator.c +2
-2{struct elv_change_ctx ctx = {};int ret = -ENODEV ;@@ -697,8 +697,8 @@ void elv_update_nr_hw_queues(struct request_queue *q)WARN_ON_ONCE (q->mq_freeze_depth ==0 );mutex_lock (&q->elevator_lock); -if (q->elevator && !blk_queue_dying (q) &&blk_queue_registered (q)) { - ctx.name = q->elevator->type->elevator_name; +if (e && !blk_queue_dying (q) &&blk_queue_registered (q)) { + ctx.name = e->elevator_name;
This looks not optimal, since you don't need elevator_lock to protect e.
block/elevator.c void elv_update_nr_hw_queues(struct request_queue *q)
Quoted 4 lines
block/elevator.c +0
-0/* force to reattach elevator after nr_hw_queue is updated */ ret =elevator_switch (q, &ctx);
BTW, this is not related to this patch. Should we handle fall_back failure like blk_mq_sysfs_register_hctxs()?
Thanks,
Kuai
Quoted 27 lines · Yu Kuai
Quoted 15 lines
block/blk-mq.c +15
-0+/* +* Stores elevator type in xarray and set current elevator to none. It uses +* q->id as an index to store the elevator type into the xarray. +*/ +static int blk_mq_elv_switch_none (struct request_queue *q, + struct xarray *elv_tbl) +{ + int ret = 0; + + lockdep_assert_held_write(&q->tag_set->update_nr_hwq_lock); + + /* +* Accessing q->elevator without holding q->elevator_lock is safe here +* because we're called from nr_hw_queue update which is protected by +* set->update_nr_hwq_lock in the writer context. So, scheduler update/ block/blk-mq.c int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr) · line 5009
Quoted 10 lines
block/blk-mq.c +10
-0+* switch code (which acquires the same lock in the reader context) +* can't run concurrently. +*/ + if (q->elevator) { + + ret = xa_insert(elv_tbl, q->id, q->elevator->type, GFP_KERNEL); + if (ret) { + WARN_ON_ONCE(1); + goto out; + }Perhaps this is simpler, remove the out tag and return directly:
Quoted 2 lines
if (
WARN_ON_ONCE(ret))
return ret;
Yes I can do that.
Quoted 2 lines
And BTW, I feel the warning is not necessary here for small memory allocation failure.
IMO, it’s actually useful to print a warning in this case — even though the memory allocation failure is relatively minor. Since the failure causes the code to unwind back to the original state and prevents the nr_hw_queues from being updated, having a warning message can help indicate why the update didn't go through. It provides visibility into what went wrong, which can be valuable for debugging or understanding unexpected behavior.
Quoted 27 lines
Quoted 20 lines
+ /*
+ * Before we switch elevator to 'none', take a reference to + * the elevator module so that whilenr_hw_queueupdate is + * running, no one can remove elevator module. We'd put the + * reference to elevator module later when we switch back + * elevator.
+ */
+__elevator_get(q->elevator->type);block/blk-mq.c +7
-0+ + elevator_set_none(q); + } +out: + return ret; +} +static void
__blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues)
{block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5032
Quoted 4 lines
block/blk-mq.c +1
-0@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int prev_nr_hw_queues = set->nr_hw_queues; unsigned int memflags; int i; + struct xarray elv_tbl;Perhaps:
Quoted 1 line
DEFINE_XARRAY(elv_tbl)
It may not work because then we have to initialize it at compile time at file scope. Then if we've multiple threads running nr_hw_queue update (for different tagsets) then we can't use that shared copy of elv_tbl as is and we've to protect it with another lock. So, IMO, instead creating xarray locally here makes sense.
Quoted 21 lines
Quoted 21 lines
(quoted diff) +0
-0lockdep_assert_held(&set->tag_list_lock); @@ -4984,6 +5041,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, return;memflags =
memalloc_noio_save();block/blk-mq.c +3
-0+ + xa_init(&elv_tbl); +
list_for_each_entry(q, &set->tag_list, tag_set_list){blk_mq_debugfs_unregister_hctxs(q);blk_mq_sysfs_unregister_hctxs(q);block/blk-mq.c +3
-4@@ -4992,11 +5052,17 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, list_for_each_entry(q, &set->tag_list, tag_set_list) blk_mq_freeze_queue_nomemsave(q); - if (blk_mq_realloc_tag_set_tags(set, nr_hw_queues) < 0) { - list_for_each_entry(q, &set->tag_list, tag_set_list) - blk_mq_unfreeze_queue_nomemrestore(q); - goto reregister; - } + /* +* Switch IO scheduler to 'none', cleaning up the data associated +* with the previous scheduler. We will switch back once we are done
Quoted 9 lines
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5062
Quoted 5 lines
block/blk-mq.c +5
-0+* updating the new sw to hw queue mappings. +*/ + list_for_each_entry(q, &set->tag_list, tag_set_list) + if (blk_mq_elv_switch_none(q, &elv_tbl)) + goto switch_back;Can we move the freeze queue into
blk_mq_elv_switch_none? To corresponding with unfreeze queue inblk_mq_elv_switch_back().
Ideally yes, but as Ming pointed in the first version of this patch we want to minimize code changes, as much possible, in the bug fix patch so that it'd be easy to back port to the older kernel release. Having said that, we'll have another patch (not a bug fix) where we'd address this by restructuring the code around this area.
Quoted 46 lines
Quoted 46 lines
block/blk-mq.c +3
-0+ + if (blk_mq_realloc_tag_set_tags(set, nr_hw_queues) < 0) + goto switch_back;fallback:
blk_mq_update_queue_map(set);block/blk-mq.c +3
-3@@ -5016,12 +5082,11 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, } blk_mq_map_swqueue(q); } - - /* elv_update_nr_hw_queues() unfreeze queue for us */ +switch_back: + /* The blk_mq_elv_switch_back unfreezes queue for us. */ list_for_each_entry(q, &set->tag_list, tag_set_list) - elv_update_nr_hw_queues(q); + blk_mq_elv_switch_back(q, &elv_tbl);-reregister:
list_for_each_entry(q, &set->tag_list, tag_set_list){blk_mq_sysfs_register_hctxs(q);blk_mq_debugfs_register_hctxs(q);block/blk-mq.c +3
-0@@ -5029,6 +5094,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, blk_mq_remove_hw_queues_cpuhp(q); blk_mq_add_hw_queues_cpuhp(q); } + + xa_destroy(&elv_tbl); + memalloc_noio_restore(memflags); /* Free the excess tags when nr_hw_queues shrink. */block/blk.h +1
-0@@ -321,7 +321,7 @@ bool blk_bio_list_merge(struct request_queue *q, struct list_head *list, bool blk_insert_flush(struct request *rq); -void elv_update_nr_hw_queues(struct request_queue *q); +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e); void elevator_set_default(struct request_queue *q); void elevator_set_none(struct request_queue *q);diff --git
a/block/elevator.cb/block/elevator.cindexab22542e6cf0..83d0bfb90a03100644block/elevator.c +0
-0@@ -689,7 +689,7 @@ static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx) * The I/O scheduler depends on the number of hardware queues, this forces a * reattachment when nr_hw_queues changes.
Quoted 9 lines
block/elevator.c static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx) · line 692
Quoted 3 lines
block/elevator.c +1
-1*/ -void elv_update_nr_hw_queues (struct request_queue *q) +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e)Now that this function no longer just update
nr_hw_queues, but switch elevator from none to e, this name will be confusing. Since there is just one caller fromblk_mq_update_nr_hw_queues(), I feel it's better to move the implematation toblk_mq_elv_switch_back()directly.
Yeah correct, and that's what exactly I implemented in the first version of this patch but then as I mentioned above we'd want to minimize the code restructuring changes in a bug fix patch so that it'd be easy to backport.
Quoted 12 lines
block/elevator.c void elv_update_nr_hw_queues(struct request_queue *q) · line 700
Quoted 10 lines
block/elevator.c +2
-2{ struct elv_change_ctx ctx = {}; int ret = -ENODEV;@@ -697,8 +697,8 @@ void elv_update_nr_hw_queues(struct request_queue *q) WARN_ON_ONCE(q->mq_freeze_depth == 0); mutex_lock(&q->elevator_lock); - if (q->elevator && !blk_queue_dying(q) && blk_queue_registered(q)) { - ctx.name = q->elevator->type->elevator_name; + if (e && !blk_queue_dying(q) && blk_queue_registered(q)) { + ctx.name = e->elevator_name;This looks not optimal, since you don't need
elevator_lockto protect e.
Quoted 7 lines
block/elevator.c void elv_update_nr_hw_queues(struct request_queue *q)
Quoted 3 lines
block/elevator.c +0
-0/* force to reattach elevator after nr_hw_queue is updated */ ret = elevator_switch(q, &ctx);BTW, this is not related to this patch. Should we handle
fall_backfailure likeblk_mq_sysfs_register_hctxs()?
OKay I guess you meant here handle failure case by unwinding the queue instead of looping through it from start to end. If yes, then it could be done but again we may not want to do it the bug fix patch.
Thanks,
--Nilay
Hi,
Quoted 71 lines · Nilay Shroff
Quoted 27 lines · Yu Kuai
Quoted 15 lines
block/blk-mq.c +15
-0+/* +* Stores elevator type in xarray and set current elevator to none. It uses +* q->id as an index to store the elevator type into the xarray. +*/ +static int blk_mq_elv_switch_none (struct request_queue *q, + struct xarray *elv_tbl) +{ + int ret = 0; + + lockdep_assert_held_write(&q->tag_set->update_nr_hwq_lock); + + /* +* Accessing q->elevator without holding q->elevator_lock is safe here +* because we're called from nr_hw_queue update which is protected by +* set->update_nr_hwq_lock in the writer context. So, scheduler update/ block/blk-mq.c int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr) · line 5009
Quoted 10 lines
block/blk-mq.c +10
-0+* switch code (which acquires the same lock in the reader context) +* can't run concurrently. +*/ + if (q->elevator) { + + ret = xa_insert(elv_tbl, q->id, q->elevator->type, GFP_KERNEL); + if (ret) { + WARN_ON_ONCE(1); + goto out; + }Perhaps this is simpler, remove the out tag and return directly:
Quoted 2 lines
if (
WARN_ON_ONCE(ret))
return ret;Yes I can do that.
Quoted 2 lines
And BTW, I feel the warning is not necessary here for small memory allocation failure.
IMO, it’s actually useful to print a warning in this case — even though the memory allocation failure is relatively minor. Since the failure causes the code to unwind back to the original state and prevents the
nr_hw_queuesfrom being updated, having a warning message can help indicate why the update didn't go through. It provides visibility into what went wrong, which can be valuable for debugging or understanding unexpected behavior.Quoted 27 lines
Quoted 20 lines
+ /*
+ * Before we switch elevator to 'none', take a reference to + * the elevator module so that whilenr_hw_queueupdate is + * running, no one can remove elevator module. We'd put the + * reference to elevator module later when we switch back + * elevator.
+ */
+__elevator_get(q->elevator->type);block/blk-mq.c +7
-0+ + elevator_set_none(q); + } +out: + return ret; +} + static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues) {block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5032
Quoted 4 lines
block/blk-mq.c +1
-0@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int prev_nr_hw_queues = set->nr_hw_queues; unsigned int memflags; int i; + struct xarray elv_tbl;Perhaps:
Quoted 6 lines
Quoted 1 line
DEFINE_XARRAY(elv_tbl)It may not work because then we have to initialize it at compile time at file scope. Then if we've multiple threads running
nr_hw_queueupdate (for different tagsets) then we can't use that shared copy ofelv_tblas is and we've to protect it with another lock. So, IMO, instead creating xarray locally here makes sense.
I'm confused, I don't add static and this should still be a stack value, I mean use this help to initialize it is simpler :)
Quoted 31 lines
Quoted 22 lines
Quoted 22 lines
(quoted diff) +0
-0lockdep_assert_held(&set->tag_list_lock); @@ -4984,6 +5041,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, return;memflags =
memalloc_noio_save();block/blk-mq.c +6
-4+ + xa_init(&elv_tbl); + list_for_each_entry(q, &set->tag_list, tag_set_list) { blk_mq_debugfs_unregister_hctxs(q); blk_mq_sysfs_unregister_hctxs(q);@@ -4992,11 +5052,17 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, list_for_each_entry(q, &set->tag_list, tag_set_list) blk_mq_freeze_queue_nomemsave(q); - if (blk_mq_realloc_tag_set_tags(set, nr_hw_queues) < 0) { - list_for_each_entry(q, &set->tag_list, tag_set_list) - blk_mq_unfreeze_queue_nomemrestore(q); - goto reregister; - } + /* +* Switch IO scheduler to 'none', cleaning up the data associated +* with the previous scheduler. We will switch back once we are done Quoted 9 lines
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5062
Quoted 5 lines
block/blk-mq.c +5
-0+* updating the new sw to hw queue mappings. +*/ + list_for_each_entry(q, &set->tag_list, tag_set_list) + if (blk_mq_elv_switch_none(q, &elv_tbl)) + goto switch_back;Can we move the freeze queue into
blk_mq_elv_switch_none? To corresponding with unfreeze queue inblk_mq_elv_switch_back().
Quoted 6 lines
Ideally yes, but as Ming pointed in the first version of this patch we want to minimize code changes, as much possible, in the bug fix patch so that it'd be easy to back port to the older kernel release. Having said that, we'll have another patch (not a bug fix) where we'd address this by restructuring the code around this area.
Ok.
Quoted 56 lines
Quoted 47 lines
Quoted 47 lines
block/blk-mq.c +9
-3+ + if (blk_mq_realloc_tag_set_tags(set, nr_hw_queues) < 0) + goto switch_back; fallback: blk_mq_update_queue_map(set);@@ -5016,12 +5082,11 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, } blk_mq_map_swqueue(q); } - - /* elv_update_nr_hw_queues() unfreeze queue for us */ +switch_back: + /* The blk_mq_elv_switch_back unfreezes queue for us. */ list_for_each_entry(q, &set->tag_list, tag_set_list) - elv_update_nr_hw_queues(q); + blk_mq_elv_switch_back(q, &elv_tbl); -reregister: list_for_each_entry(q, &set->tag_list, tag_set_list) { blk_mq_sysfs_register_hctxs(q); blk_mq_debugfs_register_hctxs(q);@@ -5029,6 +5094,9 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, blk_mq_remove_hw_queues_cpuhp(q); blk_mq_add_hw_queues_cpuhp(q); } + + xa_destroy(&elv_tbl); + memalloc_noio_restore(memflags); /* Free the excess tags when nr_hw_queues shrink. */block/blk.h +1
-0@@ -321,7 +321,7 @@ bool blk_bio_list_merge(struct request_queue *q, struct list_head *list, bool blk_insert_flush(struct request *rq); -void elv_update_nr_hw_queues(struct request_queue *q); +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e); void elevator_set_default(struct request_queue *q); void elevator_set_none(struct request_queue *q); diff --git a/block/elevator.c b/block/elevator.cindex
ab22542e6cf0..83d0bfb90a03100644block/elevator.c +0
-0@@ -689,7 +689,7 @@ static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx) * The I/O scheduler depends on the number of hardware queues, this forces a * reattachment when nr_hw_queues changes.Quoted 9 lines
block/elevator.c static int elevator_change(struct request_queue *q, struct elv_change_ctx *ctx) · line 692
Quoted 3 lines
block/elevator.c +1
-1*/ -void elv_update_nr_hw_queues (struct request_queue *q) +void elv_update_nr_hw_queues (struct request_queue *q,struct elevator_type *e)Now that this function no longer just update
nr_hw_queues, but switch elevator from none to e, this name will be confusing. Since there is just one caller fromblk_mq_update_nr_hw_queues(), I feel it's better to move the implematation toblk_mq_elv_switch_back()directly.
Quoted 4 lines
Yeah correct, and that's what exactly I implemented in the first version of this patch but then as I mentioned above we'd want to minimize the code restructuring changes in a bug fix patch so that it'd be easy to backport.
Sure.
Quoted 17 lines
Quoted 17 lines
block/elevator.c void elv_update_nr_hw_queues(struct request_queue *q) · line 700
Quoted 11 lines
block/elevator.c +2
-2{ struct elv_change_ctx ctx = {}; int ret = -ENODEV;@@ -697,8 +697,8 @@ void elv_update_nr_hw_queues(struct request_queue *q) WARN_ON_ONCE(q->mq_freeze_depth == 0); mutex_lock(&q->elevator_lock); - if (q->elevator && !blk_queue_dying(q) && blk_queue_registered(q)) { - ctx.name = q->elevator->type->elevator_name; + if (e && !blk_queue_dying(q) && blk_queue_registered(q)) { + ctx.name = e->elevator_name;This looks not optimal, since you don't need
elevator_lockto protect e.Quoted 3 lines
block/elevator.c +0
-0/* force to reattach elevator after nr_hw_queue is updated */ ret = elevator_switch(q, &ctx);
Quoted 7 lines
Quoted 3 lines
BTW, this is not related to this patch. Should we handle
fall_backfailure likeblk_mq_sysfs_register_hctxs()?OKay I guess you meant here handle failure case by unwinding the queue instead of looping through it from start to end. If yes, then it could be done but again we may not want to do it the bug fix patch.
Not like that, actually I don't have any ideas for now, the hctxs is unregistered first, and if register failed, for example, due to -ENOMEM, I can't find a way to fallback :(
Thanks,
Kuai
Quoted 5 lines
Thanks,
--Nilay.
Quoted 12 lines · Yu Kuai
Quoted 12 lines
Quoted 12 lines
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5032
Quoted 8 lines
static void
__blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues)
{block/blk-mq.c +1
-0@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int prev_nr_hw_queues = set->nr_hw_queues; unsigned int memflags; int i; + struct xarray elv_tbl;Perhaps:
DEFINE_XARRAY(elv_tbl)
Quoted 8 lines
Quoted 5 lines
It may not work because then we have to initialize it at compile time at file scope. Then if we've multiple threads running
nr_hw_queueupdate (for different tagsets) then we can't use that shared copy ofelv_tblas is and we've to protect it with another lock. So, IMO, instead creating xarray locally here makes sense.I'm confused, I don't add static and this should still be a stack value, I mean use this help to initialize it is simpler :)
Using DEFINE_XARRAY() to initialize a local(stack) variable is not safe because the xarray structure embeds a spinlock (.xa_lock), and initializing spinlocks in local scope can cause issues when lockdep is enabled.
Lockdep expects lock objects to be initialized at static file scope to correctly track lock dependencies, specifically, when locks are initialized at compile time. Please note that lockdep assigns unique keys to lock object created at compile time which it can use for analysis. This mechanism does not work properly with local compile time initialization, and attempting to do so triggers warnings or errors from lockdep.
Therefore, DEFINE_XARRAY() should only be used for static/global declarations. For local usage, it's safer to use xa_init() or xa_init_flags() to initialize the xarray dynamically at runtime.
Quoted 12 lines
Quoted 7 lines
Quoted 3 lines
BTW, this is not related to this patch. Should we handle
fall_backfailure likeblk_mq_sysfs_register_hctxs()?OKay I guess you meant here handle failure case by unwinding the queue instead of looping through it from start to end. If yes, then it could be done but again we may not want to do it the bug fix patch.
Not like that, actually I don't have any ideas for now, the hctxs is unregistered first, and if register failed, for example, due to
-ENOMEM, I can't find a way to fallback :(
If registering new hctxs fails, we fall back to the previous value of nr_hw_queues (prev_nr_hw_queues). When prev_nr_hw_queues is less than the new nr_hw_queues, we do not reallocate memory for the existing hctxs— instead, we reuse the memory that was already allocated.
Memory allocation is only attempted for the additional hctxs beyond prev_nr_hw_queues. Therefore, if memory allocation for these new hctxs fails, we can safely fall back to prev_nr_hw_queues because the memory of the previously allocated hctxs remains intact.
Thanks,
--Nilay
Hi,
Quoted 34 lines · Nilay Shroff
Quoted 12 lines · Yu Kuai
Quoted 12 lines
Quoted 12 lines
block/blk-mq.c static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, · line 5032
Quoted 8 lines
static void
__blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues)
{block/blk-mq.c +1
-0@@ -4973,6 +5029,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int prev_nr_hw_queues = set->nr_hw_queues; unsigned int memflags; int i; + struct xarray elv_tbl;Perhaps:
DEFINE_XARRAY(elv_tbl)Quoted 8 lines
Quoted 5 lines
It may not work because then we have to initialize it at compile time at file scope. Then if we've multiple threads running
nr_hw_queueupdate (for different tagsets) then we can't use that shared copy ofelv_tblas is and we've to protect it with another lock. So, IMO, instead creating xarray locally here makes sense.I'm confused, I don't add static and this should still be a stack value, I mean use this help to initialize it is simpler :)
Using
DEFINE_XARRAY()to initialize a local(stack) variable is not safe because the xarray structure embeds a spinlock (.xa_lock), and initializing spinlocks in local scope can cause issues when lockdep is enabled.
Lockdep expects lock objects to be initialized at static file scope to correctly track lock dependencies, specifically, when locks are initialized at compile time. Please note that lockdep assigns unique keys to lock object created at compile time which it can use for analysis. This mechanism does not work properly with local compile time initialization, and attempting to do so triggers warnings or errors from lockdep.
Quoted 3 lines
Therefore,
DEFINE_XARRAY()should only be used for static/global declarations. For local usage, it's safer to usexa_init()orxa_init_flags()to initialize the xarray dynamically at runtime.
Yes, you're right.
Quoted 18 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
BTW, this is not related to this patch. Should we handle
fall_backfailure likeblk_mq_sysfs_register_hctxs()?Quoted 9 lines
Quoted 4 lines
OKay I guess you meant here handle failure case by unwinding the queue instead of looping through it from start to end. If yes, then it could be done but again we may not want to do it the bug fix patch.
Not like that, actually I don't have any ideas for now, the hctxs is unregistered first, and if register failed, for example, due to
-ENOMEM, I can't find a way to fallback :(If registering new hctxs fails, we fall back to the previous value of
nr_hw_queues(prev_nr_hw_queues). Whenprev_nr_hw_queuesis less than the newnr_hw_queues, we do not reallocate memory for the existing hctxs— instead, we reuse the memory that was already allocated.
Quoted 4 lines
Memory allocation is only attempted for the additional hctxs beyond
prev_nr_hw_queues. Therefore, if memory allocation for these new hctxs fails, we can safely fall back toprev_nr_hw_queuesbecause the memory of the previously allocated hctxs remains intact.
No, like I said before, blk_mq_sysfs_unregister_hctxs() will free memory by kobject_del() for hctx->kobj and ctx->kobj, and __blk_mq_update_nr_hw_queues() call that helper in the beginning. And later in the fall back code, blk_mq_sysfs_register_hctxs() can fail by memory allocation in kobject_add(), however, the return value is not checked.
I do a quick test to inject failue, the following warning will be trigered because kobject_del() will still be called while removing the disk:
[ 230.783515] ------------[ cut here ]------------ [ 230.784841] kernfs: can not remove 'nr_tags', no directory [ 230.786350] WARNING: CPU: 1 PID: 411 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0x140 [ 230.788826] Modules linked in: null_blk nbd nvme nvme_core [last unloaded: nbd] [ 230.790817] CPU: 1 UID: 0 PID: 411 Comm: bash Not tainted 6.16.0-rc4-00079-g7136d673eb80-d [ 230.793609] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/04 [ 230.795942] RIP: 0010:kernfs_remove_by_name_ns+0x14a/0x160 [ 230.797426] Code: 0b 48 83 05 d7 8d 04 0c 01 e9 6a ff ff ff 48 c7 c7 40 3f 0e 83 48 83 05 0 [ 230.801783] RSP: 0018:ffa0000000b1fc28 EFLAGS: 00010202 [ 230.802753] RAX: 0000000000000000 RBX: ffffffff8a9bcdc8 RCX: 0000000000000000 [ 230.804056] RDX: 0000000000000002 RSI: ff11003f3fd17f48 RDI: 00000000ffffffff [ 230.805353] RBP: 0000000000000000 R08: 0000000000000000 R09: 6761745f726e2720 [ 230.806659] R10: 6f6e206e6163203a R11: 203a73666e72656b R12: ffffffff828973a0 [ 230.807983] R13: ffffffff83130a57 R14: ff1100010fea5380 R15: 0000000000000000 [ 230.809283] FS: 00007fc52f16f740(0000) GS:ff11003fb4610000(0000) knlGS:0000000000000000 [ 230.810759] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 230.811810] CR2: 000055d6b57f4b60 CR3: 000000011ac5f006 CR4: 0000000000771ef0 [ 230.812756] PKRU: 55555554 [ 230.813130] Call Trace: [ 230.813475] <TASK> [ 230.813774] remove_files+0x39/0xc0 [ 230.814252] sysfs_remove_group+0x48/0xf0 [ 230.814798] sysfs_remove_groups+0x31/0x70 [ 230.815354] __kobject_del+0x23/0xe0 [ 230.815858] kobject_del+0x17/0x50 [ 230.816323] blk_mq_unregister_hctx+0x5d/0x80 [ 230.816921] blk_mq_sysfs_unregister+0x7e/0x110 [ 230.817536] blk_unregister_queue+0x8a/0x160 [ 230.818122] __del_gendisk+0x1f9/0x530 [ 230.818638] del_gendisk+0xb3/0x100 [ 230.819120] null_del_dev+0x83/0x1b0 [null_blk] [ 230.819749] nullb_device_power_store+0x149/0x240 [null_blk] [ 230.820515] configfs_write_iter+0x10c/0x1d0 [ 230.821087] vfs_write+0x26e/0x6f0 [ 230.821528] ksys_write+0x79/0x180 [ 230.821878] __x64_sys_write+0x1d/0x30 [ 230.822254] x64_sys_call+0x45c4/0x45f0 [ 230.822648] do_syscall_64+0xa7/0x500 [ 230.823018] ? clear_bhb_loop+0x40/0x90 [ 230.823408] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 230.823921] RIP: 0033:0x7fc52f263387 [ 230.824291] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 4 [ 230.826125] RSP: 002b:00007ffc51e3b338 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 230.826884] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fc52f263387 [ 230.827603] RDX: 0000000000000002 RSI: 000055d6b57f4b60 RDI: 0000000000000001 [ 230.828331] RBP: 000055d6b57f4b60 R08: 000000000000000a R09: 00007fc52f2f94e0 [ 230.829051] R10: 00007fc52f2f93e0 R11: 0000000000000246 R12: 0000000000000002 [ 230.829770] R13: 00007fc52f336520 R14: 0000000000000002 R15: 00007fc52f336700 [ 230.830493] </TASK> [ 230.830725] ---[ end trace 0000000000000000 ]--- [ 230.831190] ------------[ cut here ]------------ [ 230.831662] kernfs: can not remove 'nr_reserved_tags', no directory
And I wonder, syzkaller test should catch this.
Thanks,
Kuai
Quoted 5 lines
Thanks,
--Nilay
.
Quoted 22 lines · Yu Kuai
Quoted 17 lines
Quoted 12 lines
Quoted 7 lines
Quoted 3 lines
BTW, this is not related to this patch. Should we handle
fall_backfailure likeblk_mq_sysfs_register_hctxs()?OKay I guess you meant here handle failure case by unwinding the queue instead of looping through it from start to end. If yes, then it could be done but again we may not want to do it the bug fix patch.
Not like that, actually I don't have any ideas for now, the hctxs is unregistered first, and if register failed, for example, due to
-ENOMEM, I can't find a way to fallback :(If registering new hctxs fails, we fall back to the previous value of
nr_hw_queues(prev_nr_hw_queues). Whenprev_nr_hw_queuesis less than the newnr_hw_queues, we do not reallocate memory for the existing hctxs— instead, we reuse the memory that was already allocated.Quoted 4 lines
Memory allocation is only attempted for the additional hctxs beyond
prev_nr_hw_queues. Therefore, if memory allocation for these new hctxs fails, we can safely fall back toprev_nr_hw_queuesbecause the memory of the previously allocated hctxs remains intact.
Quoted 7 lines
No, like I said before,
blk_mq_sysfs_unregister_hctxs()will free memory bykobject_del()forhctx->kobjandctx->kobj, and__blk_mq_update_nr_hw_queues()call that helper in the beginning. And later in the fall back code,blk_mq_sysfs_register_hctxs()can fail by memory allocation inkobject_add(), however, the return value is not checked.
This can be done checking the kobject state in sysfs: kobj->state_in_sysfs. If kobj->state_in_sysfs is 1 then it implies that kobject_add() for this kobj was successful and we can safely call kobject_del() on it otherwise we can skip it. We already have few places in the kernel using this trick. For instance, check sysfs_slab_unlink(). So, IMO, similar technique could be used for hctx->kobj and ctx->kobj as well while we attempt to delete these kobjects from unregistering queue and nr_hw_queue update.
Thanks,
--Nilay
Hi,
Quoted 32 lines · Nilay Shroff
Quoted 22 lines · Yu Kuai
Quoted 17 lines
Quoted 12 lines
Quoted 7 lines
Quoted 3 lines
BTW, this is not related to this patch. Should we handle
fall_backfailure likeblk_mq_sysfs_register_hctxs()?OKay I guess you meant here handle failure case by unwinding the queue instead of looping through it from start to end. If yes, then it could be done but again we may not want to do it the bug fix patch.
Not like that, actually I don't have any ideas for now, the hctxs is unregistered first, and if register failed, for example, due to
-ENOMEM, I can't find a way to fallback :(If registering new hctxs fails, we fall back to the previous value of
nr_hw_queues(prev_nr_hw_queues). Whenprev_nr_hw_queuesis less than the newnr_hw_queues, we do not reallocate memory for the existing hctxs— instead, we reuse the memory that was already allocated.Quoted 4 lines
Memory allocation is only attempted for the additional hctxs beyond
prev_nr_hw_queues. Therefore, if memory allocation for these new hctxs fails, we can safely fall back toprev_nr_hw_queuesbecause the memory of the previously allocated hctxs remains intact.Quoted 7 lines
No, like I said before,
blk_mq_sysfs_unregister_hctxs()will free memory bykobject_del()forhctx->kobjandctx->kobj, and__blk_mq_update_nr_hw_queues()call that helper in the beginning. And later in the fall back code,blk_mq_sysfs_register_hctxs()can fail by memory allocation inkobject_add(), however, the return value is not checked.
Quoted 7 lines
This can be done checking the kobject state in sysfs:
kobj->state_in_sysfs. Ifkobj->state_in_sysfsis 1 then it implies thatkobject_add()for this kobj was successful and we can safely callkobject_del()on it otherwise we can skip it. We already have few places in the kernel using this trick. For instance, checksysfs_slab_unlink(). So, IMO, similar technique could be used forhctx->kobjandctx->kobjas well while we attempt to delete these kobjects from unregistering queue andnr_hw_queueupdate.
I don't like missing sysfs attributes, however I don't have better solution, I'm good with this.
Thanks,
Kuai
Quoted 5 lines
Thanks,
--Nilay
.