Skip to contentSkip to conversation

[RFC PATCHv2 0/1]

RFC PATCH Superseded Keith Busch 5 participants 16 messages Sep 4, 2025 – Sep 18, 2025 io_uring

v2 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v2 cover [RFC PATCHv2 0/1]

From: Keith Busch <[email protected]>

The CQ supports mixed size entries, so why not do it for SQ's too? There are use cases that currently allocate different queues just to keep these things separated, but we can efficiently handle both cases in a single ring.

This RFC is taking the last SQE flags bit for the purpose. That might not be okay, but serves as a proof of concept for an initial look.

Changes from v1:

- Fixed up the kernel's handling for big SQEs on a mixed SQ for uring_cmd and fdinfo

- Added liburing tests for nvme uring_cmd usage and inserting a 128b SQE in the last entry to test the kernel's handling for a bad wrap.

kernel:

Keith Busch (1):
io_uring: add support for IORING_SETUP_SQE_MIXED

 include/linux/io_uring_types.h |  3 +++
 include/uapi/linux/io_uring.h  |  9 +++++++++
 io_uring/fdinfo.c              | 32 +++++++++++++++++++++++++-------
 io_uring/io_uring.c            | 20 +++++++++++++++++++-
 io_uring/register.c            |  2 +-
 io_uring/uring_cmd.c           |  4 +++-
 6 files changed, 60 insertions(+), 10 deletions(-)

liburing:

Keith Busch (3):
Add support IORING_SETUP_SQE_MIXED
Add nop testing for IORING_SETUP_SQE_MIXED
Add mixed sqe test for uring commands

 src/include/liburing.h          |  31 ++++++++
 src/include/liburing/io_uring.h |   9 +++
 test/Makefile                   |   3 +
 test/sqe-mixed-bad-wrap.c       | 121 +++++++++++++++++++++++++++++
 test/sqe-mixed-nop.c            | 104 +++++++++++++++++++++++++
 test/sqe-mixed-uring_cmd.c      | 168 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 436 insertions(+)
Signature · 1 line
2.47.3
#1 lore raw

RFC PATCH v2 1/3 Add support IORING_SETUP_SQE_MIXED

From: Keith Busch <[email protected]>

This adds core support for mixed sized SQEs in the same SQ ring. Before this, SQEs were either 64b in size (the normal size), or 128b if IORING_SETUP_SQE128 was set in the ring initialization. With the mixed support, an SQE may be either 64b or 128b on the same SQ ring. If the SQE is 128b in size, then IOSQE_SQE_128B will be set in the sqe flags. The client may post a NOP SQE with IOSQE_CQE_SKIP_SUCCESS set that the kernel should simply ignore as it's just a pad filler that is posted when required.

---
 src/include/liburing.h          | 31 +++++++++++++++++++++++++++++++
 src/include/liburing/io_uring.h |  9 +++++++++
 2 files changed, 40 insertions(+)
src/include/liburing.h +31 -0
index 7ea876e1..97c70fa7 100644
@@ -1853,6 +1853,37 @@ IOURINGINLINE struct io_uring_sqe *_io_uring_get_sqe(struct io_uring *ring)
 	return sqe;
 }
 
+IOURINGINLINE struct io_uring_sqe *io_uring_get_sqe128_mixed(struct io_uring *ring)
+	LIBURING_NOEXCEPT
+{
+	struct io_uring_sq *sq = &ring->sq;
+	unsigned head = io_uring_load_sq_head(ring), tail = sq->sqe_tail;
+	struct io_uring_sqe *sqe;
+
+	if (!(ring->flags & IORING_SETUP_SQE_MIXED))
+		return NULL;
+
+	if ((tail & sq->ring_mask) + 1 == sq->ring_entries) {
+		sqe = _io_uring_get_sqe(ring);
+		if (!sqe)
+			return NULL;
+
+		io_uring_prep_nop(sqe);
+		sqe->flags |= IOSQE_CQE_SKIP_SUCCESS;
+		tail = sq->sqe_tail;
+	}
+
+	if ((tail + 1) - head >= sq->ring_entries)
+		return NULL;
+
+	sqe = &sq->sqes[tail & sq->ring_mask];
+	sq->sqe_tail = tail + 2;
+	io_uring_initialize_sqe(sqe);
+	sqe->flags |= IOSQE_SQE_128B;
+
+	return sqe;
+}
+
 /*
  * Return the appropriate mask for a buffer ring of size 'ring_entries'
  */
src/include/liburing/io_uring.h +9 -0
index 643514e5..fd02fa52 100644
@@ -126,6 +126,7 @@ enum io_uring_sqe_flags_bit {
 	IOSQE_ASYNC_BIT,
 	IOSQE_BUFFER_SELECT_BIT,
 	IOSQE_CQE_SKIP_SUCCESS_BIT,
+	IOSQE_SQE_128B_BIT,
 };
 
 /*
@@ -145,6 +146,8 @@ enum io_uring_sqe_flags_bit {
 #define IOSQE_BUFFER_SELECT	(1U << IOSQE_BUFFER_SELECT_BIT)
 /* don't post CQE if request succeeded */
 #define IOSQE_CQE_SKIP_SUCCESS	(1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
+/* this is a 128b/big-sqe posting */
+#define IOSQE_SQE_128B          (1U << IOSQE_SQE_128B_BIT)
 
 /*
  * io_uring_setup() flags
@@ -211,6 +214,12 @@ enum io_uring_sqe_flags_bit {
  */
 #define IORING_SETUP_CQE_MIXED		(1U << 18)
 
+/*
+ *  Allow both 64b and 128b SQEs. If a 128b SQE is posted, it will have
+ *  IOSQE_SQE_128B set in sqe->flags.
+ */
+#define IORING_SETUP_SQE_MIXED		(1U << 19)
+
 enum io_uring_op {
 	IORING_OP_NOP,
 	IORING_OP_READV,
Signature · 1 line
2.47.3
#2 lore raw

Re: [RFC PATCHv2 1/3] Add support IORING_SETUP_SQE_MIXED

Quoted 27 lines · Keith Busch

From: Keith Busch <[email protected]>

This adds core support for mixed sized SQEs in the same SQ ring. Before this, SQEs were either 64b in size (the normal size), or 128b if IORING_SETUP_SQE128 was set in the ring initialization. With the mixed support, an SQE may be either 64b or 128b on the same SQ ring. If the SQE is 128b in size, then IOSQE_SQE_128B will be set in the sqe flags. The client may post a NOP SQE with IOSQE_CQE_SKIP_SUCCESS set that the kernel should simply ignore as it's just a pad filler that is posted when required.

---
 src/include/liburing.h          | 31 +++++++++++++++++++++++++++++++
 src/include/liburing/io_uring.h |  9 +++++++++
 2 files changed, 40 insertions(+)
src/include/liburing.h +1 -0
index 7ea876e1..97c70fa7 100644
@@ -1853,6 +1853,37 @@ IOURINGINLINE struct io_uring_sqe *_io_uring_get_sqe(struct io_uring *ring)
        return sqe;
 }
 
+IOURINGINLINE struct io_uring_sqe *io_uring_get_sqe128_mixed(struct io_uring *ring)

src/include/liburing.h IOURINGINLINE struct io_uring_sqe *_io_uring_get_sqe(struct io_uring *ring) · line 1866

Quoted 10 lines
src/include/liburing.h +10 -0
+       LIBURING_NOEXCEPT
+{
+       struct io_uring_sq *sq = &ring->sq;
+       unsigned head = io_uring_load_sq_head(ring), tail = sq->sqe_tail;
+       struct io_uring_sqe *sqe;
+
+       if (!(ring->flags & IORING_SETUP_SQE_MIXED))
+               return NULL;
+
+       if ((tail & sq->ring_mask) + 1 == sq->ring_entries) {

The condition you used on the kernel side is probably a bit more efficient:
(tail + 1) & sq->ring_mask == 0

src/include/liburing.h IOURINGINLINE struct io_uring_sqe *_io_uring_get_sqe(struct io_uring *ring) · line 1877

Quoted 11 lines
src/include/liburing.h +11 -0
+               sqe = _io_uring_get_sqe(ring);
+               if (!sqe)
+                       return NULL;
+
+               io_uring_prep_nop(sqe);
+               sqe->flags |= IOSQE_CQE_SKIP_SUCCESS;
+               tail = sq->sqe_tail;
+       }
+
+       if ((tail + 1) - head >= sq->ring_entries)
+               return NULL;

Would it make sense to check for a full SQ before creating a NOP SQE to avoid wasted work if the actual SQE can't be posted?

Best,
Caleb

Quoted 49 lines
src/include/liburing.h +9 -0
+
+       sqe = &sq->sqes[tail & sq->ring_mask];
+       sq->sqe_tail = tail + 2;
+       io_uring_initialize_sqe(sqe);
+       sqe->flags |= IOSQE_SQE_128B;
+
+       return sqe;
+}
+
 /*
  * Return the appropriate mask for a buffer ring of size 'ring_entries'
  */
src/include/liburing/io_uring.h +9 -1
index 643514e5..fd02fa52 100644
@@ -126,6 +126,7 @@ enum io_uring_sqe_flags_bit {
        IOSQE_ASYNC_BIT,
        IOSQE_BUFFER_SELECT_BIT,
        IOSQE_CQE_SKIP_SUCCESS_BIT,
+       IOSQE_SQE_128B_BIT,
 };
 
 /*
@@ -145,6 +146,8 @@ enum io_uring_sqe_flags_bit {
 #define IOSQE_BUFFER_SELECT    (1U << IOSQE_BUFFER_SELECT_BIT)
 /* don't post CQE if request succeeded */
 #define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
+/* this is a 128b/big-sqe posting */
+#define IOSQE_SQE_128B          (1U << IOSQE_SQE_128B_BIT)
 
 /*
  * io_uring_setup() flags
@@ -211,6 +214,12 @@ enum io_uring_sqe_flags_bit {
  */
 #define IORING_SETUP_CQE_MIXED         (1U << 18)
 
+/*
+ *  Allow both 64b and 128b SQEs. If a 128b SQE is posted, it will have
+ *  IOSQE_SQE_128B set in sqe->flags.
+ */
+#define IORING_SETUP_SQE_MIXED         (1U << 19)
+
 enum io_uring_op {
        IORING_OP_NOP,
        IORING_OP_READV,
--

2.47.3

#3 lore raw

RFC PATCH v2 1/1 io_uring: add support for IORING_SETUP_SQE_MIXED

In reply to Keith Busch

From: Keith Busch <[email protected]>

Normal rings support 64b SQEs for posting submissions, while certain features require the ring to be configured with IORING_SETUP_SQE128, as they need to convey more information per submission. This, in turn, makes ALL the SQEs be 128b in size. This is somewhat wasteful and inefficient, particularly when only certain SQEs need to be of the bigger variant.

This adds support for setting up a ring with mixed SQE sizes, using IORING_SETUP_SQE_MIXED. When setup in this mode, SQEs posted to the ring may be either 64b or 128b in size. If a SQE is 128b in size, then IOSQE_SQE_128B flag is set in the SQE flags to indicate that this is the case. If this flag isn't set, the SQE is the normal 64b variant.

SQEs on these types of mixed rings may also utilize NOP with skip success set. This can happen if the ring is one (small) SQE entry away from wrapping, and an attempt is made to post a 128b SQE. As SQEs must be contiguous in the SQ ring, a 128b SQE cannot wrap the ring. For this case, a single NOP SQE is posted with the SKIP flag set. The kernel should simply ignore those.

---
 include/linux/io_uring_types.h |  3 +++
 include/uapi/linux/io_uring.h  |  9 +++++++++
 io_uring/fdinfo.c              | 32 +++++++++++++++++++++++++-------
 io_uring/io_uring.c            | 20 +++++++++++++++++++-
 io_uring/register.c            |  2 +-
 io_uring/uring_cmd.c           |  4 +++-
 6 files changed, 60 insertions(+), 10 deletions(-)
include/linux/io_uring_types.h +3 -0
index d1e25f3fe0b3a..d6e1c73400820 100644
@@ -489,6 +489,7 @@ enum {
 	REQ_F_FORCE_ASYNC_BIT	= IOSQE_ASYNC_BIT,
 	REQ_F_BUFFER_SELECT_BIT	= IOSQE_BUFFER_SELECT_BIT,
 	REQ_F_CQE_SKIP_BIT	= IOSQE_CQE_SKIP_SUCCESS_BIT,
+	REQ_F_SQE_128B_BIT	= IOSQE_SQE_128B_BIT,
 
 	/* first byte is taken by user flags, shift it to not overlap */
 	REQ_F_FAIL_BIT		= 8,
@@ -547,6 +548,8 @@ enum {
 	REQ_F_BUFFER_SELECT	= IO_REQ_FLAG(REQ_F_BUFFER_SELECT_BIT),
 	/* IOSQE_CQE_SKIP_SUCCESS */
 	REQ_F_CQE_SKIP		= IO_REQ_FLAG(REQ_F_CQE_SKIP_BIT),
+	/* IOSQE_SQE_128B */
+	REQ_F_SQE_128B		= IO_REQ_FLAG(REQ_F_SQE_128B_BIT),
 
 	/* fail rest of links */
 	REQ_F_FAIL		= IO_REQ_FLAG(REQ_F_FAIL_BIT),
include/uapi/linux/io_uring.h +9 -0
index 04ebff33d0e62..9cef9085f52ee 100644
@@ -146,6 +146,7 @@ enum io_uring_sqe_flags_bit {
 	IOSQE_ASYNC_BIT,
 	IOSQE_BUFFER_SELECT_BIT,
 	IOSQE_CQE_SKIP_SUCCESS_BIT,
+	IOSQE_SQE_128B_BIT,
 };
 
 /*
@@ -165,6 +166,8 @@ enum io_uring_sqe_flags_bit {
 #define IOSQE_BUFFER_SELECT	(1U << IOSQE_BUFFER_SELECT_BIT)
 /* don't post CQE if request succeeded */
 #define IOSQE_CQE_SKIP_SUCCESS	(1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
+/* this is a 128b/big-sqe posting */
+#define IOSQE_SQE_128B		(1U << IOSQE_SQE_128B_BIT)
 
 /*
  * io_uring_setup() flags
@@ -231,6 +234,12 @@ enum io_uring_sqe_flags_bit {
  */
 #define IORING_SETUP_CQE_MIXED		(1U << 18)
 
+/*
+ * Allow both 64b and 128b SQEs. If a 128b SQE is posted, it will have
+ * IOSQE_SQE_128B set in sqe->flags.
+ */
+#define IORING_SETUP_SQE_MIXED		(1U << 19)
+
 enum io_uring_op {
 	IORING_OP_NOP,
 	IORING_OP_READV,
io_uring/fdinfo.c +25 -7
index 5c73398387690..ef0d17876a7b9 100644
@@ -66,7 +66,6 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
 	unsigned int cq_head = READ_ONCE(r->cq.head);
 	unsigned int cq_tail = READ_ONCE(r->cq.tail);
 	unsigned int sq_shift = 0;
-	unsigned int sq_entries;
 	int sq_pid = -1, sq_cpu = -1;
 	u64 sq_total_time = 0, sq_work_time = 0;
 	unsigned int i;
@@ -89,26 +88,44 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
 	seq_printf(m, "CqTail:\t%u\n", cq_tail);
 	seq_printf(m, "CachedCqTail:\t%u\n", data_race(ctx->cached_cq_tail));
 	seq_printf(m, "SQEs:\t%u\n", sq_tail - sq_head);
-	sq_entries = min(sq_tail - sq_head, ctx->sq_entries);
-	for (i = 0; i < sq_entries; i++) {
-		unsigned int entry = i + sq_head;
+	while (sq_head < sq_tail) {
 		struct io_uring_sqe *sqe;
 		unsigned int sq_idx;
+		bool sqe128 = false;
+		u8 sqe_flags;
 
 		if (ctx->flags & IORING_SETUP_NO_SQARRAY)
 			break;
-		sq_idx = READ_ONCE(ctx->sq_array[entry & sq_mask]);
+		sq_idx = READ_ONCE(ctx->sq_array[sq_head & sq_mask]);
 		if (sq_idx > sq_mask)
 			continue;
 		sqe = &ctx->sq_sqes[sq_idx << sq_shift];
+		sqe_flags = READ_ONCE(sqe->flags);
+		if (sq_shift)
+			sqe128 = true;
+		else if (sqe_flags & IOSQE_SQE_128B) {
+			if (!(ctx->flags & IORING_SETUP_SQE_MIXED)) {
+				seq_printf(m,
+					"%5u: invalid sqe, 128B entry on non-mixed sq\n",
+					sq_idx);
+				break;
+			}
+			if ((++sq_head & sq_mask) == 0) {
+				seq_printf(m,
+					"%5u: corrupted sqe, wrapping 128B entry\n",
+					sq_idx);
+				break;
+			}
+			sqe128 = true;
+		}
 		seq_printf(m, "%5u: opcode:%s, fd:%d, flags:%x, off:%llu, "
 			      "addr:0x%llx, rw_flags:0x%x, buf_index:%d "
 			      "user_data:%llu",
 			   sq_idx, io_uring_get_opcode(sqe->opcode), sqe->fd,
-			   sqe->flags, (unsigned long long) sqe->off,
+			   sqe_flags, (unsigned long long) sqe->off,
 			   (unsigned long long) sqe->addr, sqe->rw_flags,
 			   sqe->buf_index, sqe->user_data);
-		if (sq_shift) {
+		if (sqe128) {
 			u64 *sqeb = (void *) (sqe + 1);
 			int size = sizeof(struct io_uring_sqe) / sizeof(u64);
 			int j;
@@ -120,6 +137,7 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
 			}
 		}
 		seq_printf(m, "\n");
+		sq_head++;
 	}
 	seq_printf(m, "CQEs:\t%u\n", cq_tail - cq_head);
 	while (cq_head < cq_tail) {
io_uring/io_uring.c +19 -1
index 6c07efac977ce..78a81e882fce7 100644
@@ -2180,6 +2180,13 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
 	}
 	opcode = array_index_nospec(opcode, IORING_OP_LAST);
 
+	if (ctx->flags & IORING_SETUP_SQE_MIXED &&
+	    req->flags & REQ_F_SQE_128B) {
+		if ((ctx->cached_sq_head & (ctx->sq_entries - 1)) == 0)
+			return io_init_fail_req(req, -EINVAL);
+		ctx->cached_sq_head++;
+	}
+
 	def = &io_issue_defs[opcode];
 	if (unlikely(sqe_flags & ~SQE_COMMON_FLAGS)) {
 		/* enforce forwards compatibility on users */
@@ -2793,6 +2800,10 @@ unsigned long rings_size(unsigned int flags, unsigned int sq_entries,
 		if (cq_entries < 2)
 			return SIZE_MAX;
 	}
+	if (flags & IORING_SETUP_SQE_MIXED) {
+		if (sq_entries < 2)
+			return SIZE_MAX;
+	}
 
 #ifdef CONFIG_SMP
 	off = ALIGN(off, SMP_CACHE_BYTES);
@@ -3724,6 +3735,13 @@ static int io_uring_sanitise_params(struct io_uring_params *p)
 	if ((flags & (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED)) ==
 	    (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED))
 		return -EINVAL;
+	/*
+	 * Nonsensical to ask for SQE128 and mixed SQE support, it's not
+	 * supported to post 64b SQEs on a ring setup with SQE128.
+	 */
+	if ((flags & (IORING_SETUP_SQE128|IORING_SETUP_SQE_MIXED)) ==
+	    (IORING_SETUP_SQE128|IORING_SETUP_SQE_MIXED))
+		return -EINVAL;
 
 	return 0;
 }
@@ -3952,7 +3970,7 @@ static long io_uring_setup(u32 entries, struct io_uring_params __user *params)
 			IORING_SETUP_SINGLE_ISSUER | IORING_SETUP_DEFER_TASKRUN |
 			IORING_SETUP_NO_MMAP | IORING_SETUP_REGISTERED_FD_ONLY |
 			IORING_SETUP_NO_SQARRAY | IORING_SETUP_HYBRID_IOPOLL |
-			IORING_SETUP_CQE_MIXED))
+			IORING_SETUP_CQE_MIXED | IORING_SETUP_SQE_MIXED))
 		return -EINVAL;
 
 	return io_uring_create(entries, &p, params);
io_uring/register.c +1 -1
index aa5f56ad83584..29aa7d3b4e820 100644
@@ -397,7 +397,7 @@ static void io_register_free_rings(struct io_ring_ctx *ctx,
 #define RESIZE_FLAGS	(IORING_SETUP_CQSIZE | IORING_SETUP_CLAMP)
 #define COPY_FLAGS	(IORING_SETUP_NO_SQARRAY | IORING_SETUP_SQE128 | \
 			 IORING_SETUP_CQE32 | IORING_SETUP_NO_MMAP | \
-			 IORING_SETUP_CQE_MIXED)
+			 IORING_SETUP_CQE_MIXED | IORING_SETUP_SQE_MIXED)
 
 static int io_register_resize_rings(struct io_ring_ctx *ctx, void __user *arg)
 {
io_uring/uring_cmd.c +3 -1
index 5562e8491c5bd..8dd409774fd87 100644
@@ -239,7 +239,9 @@ int io_uring_cmd(struct io_kiocb *req, unsigned int issue_flags)
 	if (ret)
 		return ret;
 
-	if (ctx->flags & IORING_SETUP_SQE128)
+	if (ctx->flags & IORING_SETUP_SQE128 ||
+	    (ctx->flags & IORING_SETUP_SQE_MIXED &&
+	     req->flags & REQ_F_SQE_128B))
 		issue_flags |= IO_URING_F_SQE128;
 	if (ctx->flags & (IORING_SETUP_CQE32 | IORING_SETUP_CQE_MIXED))
 		issue_flags |= IO_URING_F_CQE32;
Signature · 1 line
2.47.3
#4 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 10 lines · Keith Busch

From: Keith Busch <[email protected]>

Normal rings support 64b SQEs for posting submissions, while certain features require the ring to be configured with IORING_SETUP_SQE128, as they need to convey more information per submission. This, in turn, makes ALL the SQEs be 128b in size. This is somewhat wasteful and inefficient, particularly when only certain SQEs need to be of the bigger variant.

Quoted 5 lines

This adds support for setting up a ring with mixed SQE sizes, using IORING_SETUP_SQE_MIXED. When setup in this mode, SQEs posted to the ring may be either 64b or 128b in size. If a SQE is 128b in size, then IOSQE_SQE_128B flag is set in the SQE flags to indicate that this is the case. If this flag isn't set, the SQE is the normal 64b variant.

I mentioned this on the previous revision, but it might be helpful to document that IOSQE_SQE_128B also implies skipping an entry in the SQ indirection array (when not using IORING_SETUP_NO_SQARRAY). There's no obvious need to burn an entry in this array, as only a single u32 index is needed to refer to the SQE regardless of the SQE size. But it certainly simplifies the implementation on the userspace side if it's using an identity mapping in the SQ indirection array.

Quoted 44 lines

SQEs on these types of mixed rings may also utilize NOP with skip success set. This can happen if the ring is one (small) SQE entry away from wrapping, and an attempt is made to post a 128b SQE. As SQEs must be contiguous in the SQ ring, a 128b SQE cannot wrap the ring. For this case, a single NOP SQE is posted with the SKIP flag set. The kernel should simply ignore those.

---
 include/linux/io_uring_types.h |  3 +++
 include/uapi/linux/io_uring.h  |  9 +++++++++
 io_uring/fdinfo.c              | 32 +++++++++++++++++++++++++-------
 io_uring/io_uring.c            | 20 +++++++++++++++++++-
 io_uring/register.c            |  2 +-
 io_uring/uring_cmd.c           |  4 +++-
 6 files changed, 60 insertions(+), 10 deletions(-)
include/linux/io_uring_types.h +3 -0
index d1e25f3fe0b3a..d6e1c73400820 100644
@@ -489,6 +489,7 @@ enum {
        REQ_F_FORCE_ASYNC_BIT   = IOSQE_ASYNC_BIT,
        REQ_F_BUFFER_SELECT_BIT = IOSQE_BUFFER_SELECT_BIT,
        REQ_F_CQE_SKIP_BIT      = IOSQE_CQE_SKIP_SUCCESS_BIT,
+       REQ_F_SQE_128B_BIT      = IOSQE_SQE_128B_BIT,
 
        /* first byte is taken by user flags, shift it to not overlap */
        REQ_F_FAIL_BIT          = 8,
@@ -547,6 +548,8 @@ enum {
        REQ_F_BUFFER_SELECT     = IO_REQ_FLAG(REQ_F_BUFFER_SELECT_BIT),
        /* IOSQE_CQE_SKIP_SUCCESS */
        REQ_F_CQE_SKIP          = IO_REQ_FLAG(REQ_F_CQE_SKIP_BIT),
+       /* IOSQE_SQE_128B */
+       REQ_F_SQE_128B          = IO_REQ_FLAG(REQ_F_SQE_128B_BIT),
 
        /* fail rest of links */
        REQ_F_FAIL              = IO_REQ_FLAG(REQ_F_FAIL_BIT),
include/uapi/linux/io_uring.h +0 -0
index 04ebff33d0e62..9cef9085f52ee 100644

include/uapi/linux/io_uring.h enum io_uring_sqe_flags_bit { · line 149

Quoted 4 lines
include/uapi/linux/io_uring.h +1 -0
@@ -146,6 +146,7 @@ enum io_uring_sqe_flags_bit {
        IOSQE_ASYNC_BIT,
        IOSQE_BUFFER_SELECT_BIT,
        IOSQE_CQE_SKIP_SUCCESS_BIT,
+       IOSQE_SQE_128B_BIT,

Have you given any thought to how we would handle the likely scenario that we want to define more SQE flags in the future? Are there existing unused bytes of the SQE where the new flags could go? If not, we may need to repurpose some existing but rarely used field. And then we'd likely want to reserve this last flag bit to specify whether the SQE is using this "extended flags" field.

Quoted 101 lines
include/uapi/linux/io_uring.h +8 -0
 };
 
 /*
@@ -165,6 +166,8 @@ enum io_uring_sqe_flags_bit {
 #define IOSQE_BUFFER_SELECT    (1U << IOSQE_BUFFER_SELECT_BIT)
 /* don't post CQE if request succeeded */
 #define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
+/* this is a 128b/big-sqe posting */
+#define IOSQE_SQE_128B         (1U << IOSQE_SQE_128B_BIT)
 
 /*
  * io_uring_setup() flags
@@ -231,6 +234,12 @@ enum io_uring_sqe_flags_bit {
  */
 #define IORING_SETUP_CQE_MIXED         (1U << 18)
 
+/*
+ * Allow both 64b and 128b SQEs. If a 128b SQE is posted, it will have
+ * IOSQE_SQE_128B set in sqe->flags.
+ */
+#define IORING_SETUP_SQE_MIXED         (1U << 19)
+
 enum io_uring_op {
        IORING_OP_NOP,
        IORING_OP_READV,
io_uring/fdinfo.c +25 -7
index 5c73398387690..ef0d17876a7b9 100644
@@ -66,7 +66,6 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
        unsigned int cq_head = READ_ONCE(r->cq.head);
        unsigned int cq_tail = READ_ONCE(r->cq.tail);
        unsigned int sq_shift = 0;
-       unsigned int sq_entries;
        int sq_pid = -1, sq_cpu = -1;
        u64 sq_total_time = 0, sq_work_time = 0;
        unsigned int i;
@@ -89,26 +88,44 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
        seq_printf(m, "CqTail:\t%u\n", cq_tail);
        seq_printf(m, "CachedCqTail:\t%u\n", data_race(ctx->cached_cq_tail));
        seq_printf(m, "SQEs:\t%u\n", sq_tail - sq_head);
-       sq_entries = min(sq_tail - sq_head, ctx->sq_entries);
-       for (i = 0; i < sq_entries; i++) {
-               unsigned int entry = i + sq_head;
+       while (sq_head < sq_tail) {
                struct io_uring_sqe *sqe;
                unsigned int sq_idx;
+               bool sqe128 = false;
+               u8 sqe_flags;
 
                if (ctx->flags & IORING_SETUP_NO_SQARRAY)
                        break;
-               sq_idx = READ_ONCE(ctx->sq_array[entry & sq_mask]);
+               sq_idx = READ_ONCE(ctx->sq_array[sq_head & sq_mask]);
                if (sq_idx > sq_mask)
                        continue;
                sqe = &ctx->sq_sqes[sq_idx << sq_shift];
+               sqe_flags = READ_ONCE(sqe->flags);
+               if (sq_shift)
+                       sqe128 = true;
+               else if (sqe_flags & IOSQE_SQE_128B) {
+                       if (!(ctx->flags & IORING_SETUP_SQE_MIXED)) {
+                               seq_printf(m,
+                                       "%5u: invalid sqe, 128B entry on non-mixed sq\n",
+                                       sq_idx);
+                               break;
+                       }
+                       if ((++sq_head & sq_mask) == 0) {
+                               seq_printf(m,
+                                       "%5u: corrupted sqe, wrapping 128B entry\n",
+                                       sq_idx);
+                               break;
+                       }
+                       sqe128 = true;
+               }
                seq_printf(m, "%5u: opcode:%s, fd:%d, flags:%x, off:%llu, "
                              "addr:0x%llx, rw_flags:0x%x, buf_index:%d "
                              "user_data:%llu",
                           sq_idx, io_uring_get_opcode(sqe->opcode), sqe->fd,
-                          sqe->flags, (unsigned long long) sqe->off,
+                          sqe_flags, (unsigned long long) sqe->off,
                           (unsigned long long) sqe->addr, sqe->rw_flags,
                           sqe->buf_index, sqe->user_data);
-               if (sq_shift) {
+               if (sqe128) {
                        u64 *sqeb = (void *) (sqe + 1);
                        int size = sizeof(struct io_uring_sqe) / sizeof(u64);
                        int j;
@@ -120,6 +137,7 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
                        }
                }
                seq_printf(m, "\n");
+               sq_head++;
        }
        seq_printf(m, "CQEs:\t%u\n", cq_tail - cq_head);
        while (cq_head < cq_tail) {
io_uring/io_uring.c +0 -0
index 6c07efac977ce..78a81e882fce7 100644

io_uring/io_uring.c static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req, · line 2184

Quoted 5 lines
io_uring/io_uring.c +2 -0
@@ -2180,6 +2180,13 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
        }
        opcode = array_index_nospec(opcode, IORING_OP_LAST);
 
+       if (ctx->flags & IORING_SETUP_SQE_MIXED &&
+           req->flags & REQ_F_SQE_128B) {

Could use the local variable sqe_flags instead of req->flags

io_uring/io_uring.c static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req, · line 2187

Quoted 3 lines
io_uring/io_uring.c +3 -0
+               if ((ctx->cached_sq_head & (ctx->sq_entries - 1)) == 0)
+                       return io_init_fail_req(req, -EINVAL);
+               ctx->cached_sq_head++;

I think the double increment of cached_sq_head breaks the logic in io_sqring_entries(). The current assumption is that the difference between the SQ tail and cached_sq_head is the number of SQEs available to dispatch. And io_submit_sqes() will happily submit that many SQEs without checking whether cached_sq_head has reached the SQ tail. This assumption is broken now that one SQE may count for 2 increments of the SQ indices.

Quoted 57 lines
io_uring/io_uring.c +14 -1
+       }
+
        def = &io_issue_defs[opcode];
        if (unlikely(sqe_flags & ~SQE_COMMON_FLAGS)) {
                /* enforce forwards compatibility on users */
@@ -2793,6 +2800,10 @@ unsigned long rings_size(unsigned int flags, unsigned int sq_entries,
                if (cq_entries < 2)
                        return SIZE_MAX;
        }
+       if (flags & IORING_SETUP_SQE_MIXED) {
+               if (sq_entries < 2)
+                       return SIZE_MAX;
+       }
 
 #ifdef CONFIG_SMP
        off = ALIGN(off, SMP_CACHE_BYTES);
@@ -3724,6 +3735,13 @@ static int io_uring_sanitise_params(struct io_uring_params *p)
        if ((flags & (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED)) ==
            (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED))
                return -EINVAL;
+       /*
+        * Nonsensical to ask for SQE128 and mixed SQE support, it's not
+        * supported to post 64b SQEs on a ring setup with SQE128.
+        */
+       if ((flags & (IORING_SETUP_SQE128|IORING_SETUP_SQE_MIXED)) ==
+           (IORING_SETUP_SQE128|IORING_SETUP_SQE_MIXED))
+               return -EINVAL;
 
        return 0;
 }
@@ -3952,7 +3970,7 @@ static long io_uring_setup(u32 entries, struct io_uring_params __user *params)
                        IORING_SETUP_SINGLE_ISSUER | IORING_SETUP_DEFER_TASKRUN |
                        IORING_SETUP_NO_MMAP | IORING_SETUP_REGISTERED_FD_ONLY |
                        IORING_SETUP_NO_SQARRAY | IORING_SETUP_HYBRID_IOPOLL |
-                       IORING_SETUP_CQE_MIXED))
+                       IORING_SETUP_CQE_MIXED | IORING_SETUP_SQE_MIXED))
                return -EINVAL;
 
        return io_uring_create(entries, &p, params);
io_uring/register.c +1 -1
index aa5f56ad83584..29aa7d3b4e820 100644
@@ -397,7 +397,7 @@ static void io_register_free_rings(struct io_ring_ctx *ctx,
 #define RESIZE_FLAGS   (IORING_SETUP_CQSIZE | IORING_SETUP_CLAMP)
 #define COPY_FLAGS     (IORING_SETUP_NO_SQARRAY | IORING_SETUP_SQE128 | \
                         IORING_SETUP_CQE32 | IORING_SETUP_NO_MMAP | \
-                        IORING_SETUP_CQE_MIXED)
+                        IORING_SETUP_CQE_MIXED | IORING_SETUP_SQE_MIXED)
 
 static int io_register_resize_rings(struct io_ring_ctx *ctx, void __user *arg)
 {
io_uring/uring_cmd.c +0 -0
index 5562e8491c5bd..8dd409774fd87 100644

io_uring/uring_cmd.c int io_uring_cmd(struct io_kiocb *req, unsigned int issue_flags) · line 245

Quoted 8 lines
io_uring/uring_cmd.c +3 -1
@@ -239,7 +239,9 @@ int io_uring_cmd(struct io_kiocb *req, unsigned int issue_flags)
        if (ret)
                return ret;
 
-       if (ctx->flags & IORING_SETUP_SQE128)
+       if (ctx->flags & IORING_SETUP_SQE128 ||
+           (ctx->flags & IORING_SETUP_SQE_MIXED &&
+            req->flags & REQ_F_SQE_128B))
                issue_flags |= IO_URING_F_SQE128;

uring_sqe_size() still seems to be missing this REQ_F_SQE_128B logic?

Best,
Caleb

Quoted 5 lines
io_uring/uring_cmd.c +0 -1
        if (ctx->flags & (IORING_SETUP_CQE32 | IORING_SETUP_CQE_MIXED))
                issue_flags |= IO_URING_F_CQE32;
--

2.47.3

maintainer
#5 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 8 lines · Caleb Sander Mateos
Quoted 8 lines
include/uapi/linux/io_uring.h +0 -0
index 04ebff33d0e62..9cef9085f52ee 100644
@@ -146,6 +146,7 @@ enum io_uring_sqe_flags_bit {
        IOSQE_ASYNC_BIT,
        IOSQE_BUFFER_SELECT_BIT,
        IOSQE_CQE_SKIP_SUCCESS_BIT,
Quoted 8 lines

include/uapi/linux/io_uring.h enum io_uring_sqe_flags_bit { · line 149

Quoted 1 line
include/uapi/linux/io_uring.h +1 -0
+       IOSQE_SQE_128B_BIT,

Have you given any thought to how we would handle the likely scenario that we want to define more SQE flags in the future? Are there existing unused bytes of the SQE where the new flags could go? If not, we may need to repurpose some existing but rarely used field. And then we'd likely want to reserve this last flag bit to specify whether the SQE is using this "extended flags" field.

Yep this is my main problem with this change. If you search the io_uring list on lore you can find discussions about this in relation to when Ming had his SQE grouping patches that also used this last bit. My suggestion then was indeed to have this last flag be "look at XX for IOSQE2_* flags". But it never quite got finalized. IIRC, my suggestion back then was to use the personality field, since it's a pretty specialized use case. Only issue with that is that you could then not use IOSQE2_* flags with personality.

IOW, I think the IOSQE_SQE_128B flag is fine for prototyping and testing these patches, but we unfortunately do need to iron out how on earth we'll expose some more flags before this can go in.

Suggestions welcome...

Signature · 1 line
Jens Axboe
#6 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 27 lines · Jens Axboe
Quoted 8 lines · Caleb Sander Mateos
Quoted 8 lines
include/uapi/linux/io_uring.h +0 -0
index 04ebff33d0e62..9cef9085f52ee 100644
@@ -146,6 +146,7 @@ enum io_uring_sqe_flags_bit {
        IOSQE_ASYNC_BIT,
        IOSQE_BUFFER_SELECT_BIT,
        IOSQE_CQE_SKIP_SUCCESS_BIT,
Quoted 8 lines

include/uapi/linux/io_uring.h enum io_uring_sqe_flags_bit { · line 149

Quoted 1 line
include/uapi/linux/io_uring.h +1 -0
+       IOSQE_SQE_128B_BIT,

Have you given any thought to how we would handle the likely scenario that we want to define more SQE flags in the future? Are there existing unused bytes of the SQE where the new flags could go? If not, we may need to repurpose some existing but rarely used field. And then we'd likely want to reserve this last flag bit to specify whether the SQE is using this "extended flags" field.

Yep this is my main problem with this change. If you search the io_uring list on lore you can find discussions about this in relation to when Ming had his SQE grouping patches that also used this last bit. My suggestion then was indeed to have this last flag be "look at XX for IOSQE2_* flags". But it never quite got finalized. IIRC, my suggestion back then was to use the personality field, since it's a pretty specialized use case. Only issue with that is that you could then not use IOSQE2_* flags with personality.

Quoted 3 lines

IOW, I think the IOSQE_SQE_128B flag is fine for prototyping and testing these patches, but we unfortunately do need to iron out how on earth we'll expose some more flags before this can go in.

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Thanks,
Ming

#7 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 28 lines · Ming Lei
Quoted 27 lines · Jens Axboe
Quoted 8 lines · Caleb Sander Mateos
Quoted 8 lines
include/uapi/linux/io_uring.h +0 -0
index 04ebff33d0e62..9cef9085f52ee 100644
@@ -146,6 +146,7 @@ enum io_uring_sqe_flags_bit {
        IOSQE_ASYNC_BIT,
        IOSQE_BUFFER_SELECT_BIT,
        IOSQE_CQE_SKIP_SUCCESS_BIT,
Quoted 8 lines

include/uapi/linux/io_uring.h enum io_uring_sqe_flags_bit { · line 149

Quoted 1 line
include/uapi/linux/io_uring.h +1 -0
+       IOSQE_SQE_128B_BIT,

Have you given any thought to how we would handle the likely scenario that we want to define more SQE flags in the future? Are there existing unused bytes of the SQE where the new flags could go? If not, we may need to repurpose some existing but rarely used field. And then we'd likely want to reserve this last flag bit to specify whether the SQE is using this "extended flags" field.

Yep this is my main problem with this change. If you search the io_uring list on lore you can find discussions about this in relation to when Ming had his SQE grouping patches that also used this last bit. My suggestion then was indeed to have this last flag be "look at XX for IOSQE2_* flags". But it never quite got finalized. IIRC, my suggestion back then was to use the personality field, since it's a pretty specialized use case. Only issue with that is that you could then not use IOSQE2_* flags with personality.

Quoted 6 lines
Quoted 3 lines

IOW, I think the IOSQE_SQE_128B flag is fine for prototyping and testing these patches, but we unfortunately do need to iron out how on earth we'll expose some more flags before this can go in.

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Or in case of IORING_SETUP_SQE_MIXED, IORING_OP_URING_CMD is always interpreted as plain 64bit SQE, also add IORING_OP_URING_CMD128 for SQE128 only.

Thanks,
Ming

#8 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 6 lines · Ming Lei
Quoted 2 lines · Ming Lei

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Or in case of IORING_SETUP_SQE_MIXED, IORING_OP_URING_CMD is always interpreted as plain 64bit SQE, also add IORING_OP_URING_CMD128 for SQE128 only.

Maybe that's good enough, but I was looking for more flexibility to have big SQEs for read/write too. Not that I have a strong use case for it now, but in hindsight, that's where "io_uring_attr_pi" should have been placed instead of outide the submission queue.

#9 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 6 lines · Keith Busch
Quoted 4 lines · Ming Lei
Quoted 2 lines · Ming Lei

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Quoted 7 lines
Quoted 2 lines

Or in case of IORING_SETUP_SQE_MIXED, IORING_OP_URING_CMD is always interpreted as plain 64bit SQE, also add IORING_OP_URING_CMD128 for SQE128 only.

Maybe that's good enough, but I was looking for more flexibility to have big SQEs for read/write too. Not that I have a strong use case for it now, but in hindsight, that's where "io_uring_attr_pi" should have been placed instead of outide the submission queue.

Then you can add READ128/WRITE128...

Thanks,

maintainer
#10 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 10 lines · Ming Lei
Quoted 9 lines · On Thu, Sep 11, 2025 at 9:02?PM Keith Busch <[email protected]> wrote:
Quoted 6 lines · Ming Lei
Quoted 2 lines · Ming Lei

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Or in case of IORING_SETUP_SQE_MIXED, IORING_OP_URING_CMD is always interpreted as plain 64bit SQE, also add IORING_OP_URING_CMD128 for SQE128 only.

Quoted 6 lines
Quoted 4 lines

Maybe that's good enough, but I was looking for more flexibility to have big SQEs for read/write too. Not that I have a strong use case for it now, but in hindsight, that's where "io_uring_attr_pi" should have been placed instead of outide the submission queue.

Then you can add READ128/WRITE128...

Yeah, I do think this is the best approach - make it implied by the opcode. Doesn't mean we have to bifurcate the whole opcode space, as generally not a lot of opcodes will want/need an 128b SQE.

And it also nicely solves the issue of needing to solve the flags space issue.

So maybe spin a v3 with that approach?

Signature · 1 line
Jens Axboe
#11 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 18 lines · Jens Axboe
Quoted 10 lines · Ming Lei
Quoted 9 lines · On Thu, Sep 11, 2025 at 9:02?PM Keith Busch <[email protected]> wrote:
Quoted 6 lines · Ming Lei
Quoted 2 lines · Ming Lei

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Or in case of IORING_SETUP_SQE_MIXED, IORING_OP_URING_CMD is always interpreted as plain 64bit SQE, also add IORING_OP_URING_CMD128 for SQE128 only.

Quoted 6 lines
Quoted 4 lines

Maybe that's good enough, but I was looking for more flexibility to have big SQEs for read/write too. Not that I have a strong use case for it now, but in hindsight, that's where "io_uring_attr_pi" should have been placed instead of outide the submission queue.

Then you can add READ128/WRITE128...

Quoted 8 lines

Yeah, I do think this is the best approach - make it implied by the opcode. Doesn't mean we have to bifurcate the whole opcode space, as generally not a lot of opcodes will want/need an 128b SQE.

And it also nicely solves the issue of needing to solve the flags space issue.

So maybe spin a v3 with that approach?

Yep, almost got it ready. I had to introduce NOP128 because that's a very convenient op for testing. I hope that's okay.

maintainer
#12 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

Quoted 23 lines · Keith Busch
Quoted 22 lines · Jens Axboe
Quoted 10 lines · Ming Lei
Quoted 9 lines · On Thu, Sep 11, 2025 at 9:02?PM Keith Busch <[email protected]> wrote:
Quoted 6 lines · Ming Lei
Quoted 2 lines · Ming Lei

SQE128 is used for uring_cmd only, so it could be one uring_cmd private flag. However, the implementation may be ugly and fragile.

Or in case of IORING_SETUP_SQE_MIXED, IORING_OP_URING_CMD is always interpreted as plain 64bit SQE, also add IORING_OP_URING_CMD128 for SQE128 only.

Quoted 6 lines
Quoted 4 lines

Maybe that's good enough, but I was looking for more flexibility to have big SQEs for read/write too. Not that I have a strong use case for it now, but in hindsight, that's where "io_uring_attr_pi" should have been placed instead of outide the submission queue.

Then you can add READ128/WRITE128...

Yeah, I do think this is the best approach - make it implied by the opcode. Doesn't mean we have to bifurcate the whole opcode space, as generally not a lot of opcodes will want/need an 128b SQE.

Quoted 7 lines
Quoted 4 lines

And it also nicely solves the issue of needing to solve the flags space issue.

So maybe spin a v3 with that approach?

Yep, almost got it ready. I had to introduce NOP128 because that's a very convenient op for testing. I hope that's okay.

Yep that's fine, I'm assuming they'd basically use the same opcode handler anyway.

Signature · 1 line
Jens Axboe
#13 lore raw

Re: [RFC PATCHv2 1/1] io_uring: add support for IORING_SETUP_SQE_MIXED

In reply to Caleb Sander Mateos
Quoted 17 lines · Caleb Sander Mateos

include/uapi/linux/io_uring.h enum io_uring_sqe_flags_bit { · line 149

Quoted 9 lines · Keith Busch
include/uapi/linux/io_uring.h +1 -0
index 04ebff33d0e62..9cef9085f52ee 100644
@@ -146,6 +146,7 @@ enum io_uring_sqe_flags_bit {
        IOSQE_ASYNC_BIT,
        IOSQE_BUFFER_SELECT_BIT,
        IOSQE_CQE_SKIP_SUCCESS_BIT,
+       IOSQE_SQE_128B_BIT,

Have you given any thought to how we would handle the likely scenario that we want to define more SQE flags in the future? Are there existing unused bytes of the SQE where the new flags could go? If not, we may need to repurpose some existing but rarely used field. And then we'd likely want to reserve this last flag bit to specify whether the SQE is using this "extended flags" field.

Yeah, I mentioned in the cover letter it may not okay to take this bit for the cause. Using it this way is just a simple way forward for the proof-of-concept to iron out handling mixed SQEs everywhere else. I wouldn't remove the "RFC" prefix until we have agreement on how to flag a big SQE command on a mixed SQ. One option, for example, might take the highest opcode bit since we're a ways off off from needing it for more ops.

#14 lore raw

RFC PATCH v2 2/3 Add nop testing for IORING_SETUP_SQE_MIXED

In reply to Keith Busch

From: Keith Busch <[email protected]>

Add NOP testing for mixed sized SQEs.

---
 test/Makefile              |   2 +
 test/sqe-mixed-bad-wrap.c  | 121 +++++++++++++++++++++++++++++++++++++
 test/sqe-mixed-nop.c       | 104 +++++++++++++++++++++++++++++++
 test/sqe-mixed-uring_cmd.c |   0
 4 files changed, 227 insertions(+)
 create mode 100644 test/sqe-mixed-bad-wrap.c
 create mode 100644 test/sqe-mixed-nop.c
 create mode 100644 test/sqe-mixed-uring_cmd.c
test/Makefile +2 -0
index 54251bf2..a36c70a4 100644
@@ -232,6 +232,8 @@ test_srcs := \
 	sq-poll-share.c \
 	sqpoll-sleep.c \
 	sq-space_left.c \
+	sqe-mixed-nop.c \
+	sqe-mixed-bad-wrap.c \
 	sqwait.c \
 	stdout.c \
 	submit-and-wait.c \
test/sqe-mixed-bad-wrap.c new file +121 -0

121 lines not on this page · raw message

test/sqe-mixed-nop.c new file +104 -0

104 lines not on this page · raw message

test/sqe-mixed-uring_cmd.c new file +0 -0
new file mode 100644
index 00000000..e69de29b
Signature · 1 line
2.47.3
#15 lore raw

RFC PATCH v2 3/3 Add mixed sqe test for uring commands

In reply to Keith Busch

From: Keith Busch <[email protected]>

---
 test/Makefile              |   1 +
 test/sqe-mixed-uring_cmd.c | 168 +++++++++++++++++++++++++++++++++++++
 2 files changed, 169 insertions(+)
test/Makefile +1 -0
index a36c70a4..25af26a2 100644
@@ -234,6 +234,7 @@ test_srcs := \
 	sq-space_left.c \
 	sqe-mixed-nop.c \
 	sqe-mixed-bad-wrap.c \
+	sqe-mixed-uring_cmd.c \
 	sqwait.c \
 	stdout.c \
 	submit-and-wait.c \
test/sqe-mixed-uring_cmd.c +168 -0

168 lines not on this page · raw message

Signature · 1 line
2.47.3