ARM: dts: imx6sll: Use 'dma-names'
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx6sll: Use 'dma-names'
'dma-name' is not a valid property and causes the following dt-schema warning:
dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
Fix it by using 'dma-names' instead.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +1 -1
@@ -309,7 +309,7 @@ uart3: serial@2034000 { reg = <0x02034000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; - dma-name = "rx", "tx"; + dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART3_IPG>, <&clks IMX6SLL_CLK_UART3_SERIAL>; clock-names = "ipg", "per";
Signature · 1 line
2.34.1
Quoted 9 lines · Fabio Estevam
'dma-name' is not a valid property and causes the following dt-schema warning:
dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
Fix it by using 'dma-names' instead.
Signed-off-by Fabio Estevam <[email protected]>---
Reviewed-by Frank Li <[email protected]>
Quoted 19 lines
arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +1
-2@@ -309,7 +309,7 @@ uart3: serial@2034000 { reg = <0x02034000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; - dma-name = "rx", "tx"; + dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART3_IPG>, <&clks IMX6SLL_CLK_UART3_SERIAL>; clock-names = "ipg", "per"; --2.34.1
Shawn Guo
AppliedQuoted 8 lines · Fabio Estevam
'dma-name' is not a valid property and causes the following dt-schema warning:
dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'
Fix it by using 'dma-names' instead.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks!