RISC-V Tenstorrent Devicetree for v6.19

Hi Arnd,

Please pull these changes which add Tenstorrent as a vendor and enable support for Blackhole. It adds the appropriate entries in MAINTAINERS. The changes all come from a single series [1] posted by myself. Joel Stanley has reviewed and tested all the patches. Rob acked or reviewed all the bindings patches. W=1 dtbs_check and dt_binding_check produce no warnings.

[1] https://lore.kernel.org/linux-riscv/[email protected]/

Thanks,
Drew

The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:

Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)

are available in the Git repository at:

[email protected]:tenstorrent/linux.git tags/tenstorrent-dt-for-v6.19

for you to fetch changes up to a71e6e8eea8ae2d624f097911f43357bba06d2a5:

riscv: defconfig: Enable Tenstorrent SoCs (2025-10-18 10:44:15 -0700)

----------------------------------------------------------------
Tenstorrent device tree for v6.19

Add Tenstorrent as a vendor and enable support for the Blackhole SoC in Blackhole P100 and P150 PCIe cards. The SoC contains four RISC-V CPU tiles consisting of 4x SiFive X280 cores.

There is a virtual UART implemented in OpenSBI firmware that allows a console program on the PCIe host to communicate through shared memory with Linux running on the Blackhole card.

----------------------------------------------------------------
Drew Fustini (8):
dt-bindings: vendor-prefixes: Add Tenstorrent AI ULC
dt-bindings: riscv: Add Tenstorrent Blackhole compatible
dt-bindings: riscv: cpus: Add SiFive X280 compatible
dt-bindings: timers: Add Tenstorrent Blackhole compatible
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: defconfig: Enable Tenstorrent SoCs

 .../interrupt-controller/sifive,plic-1.0.0.yaml    |   1 +
 Documentation/devicetree/bindings/riscv/cpus.yaml  |   1 +
 .../devicetree/bindings/riscv/tenstorrent.yaml     |  28 ++++++
 .../devicetree/bindings/timer/sifive,clint.yaml    |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 MAINTAINERS                                        |   9 ++
 arch/riscv/Kconfig.socs                            |   8 ++
 arch/riscv/boot/dts/Makefile                       |   1 +
 arch/riscv/boot/dts/tenstorrent/Makefile           |   2 +
 arch/riscv/boot/dts/tenstorrent/blackhole-card.dts |  14 +++
 arch/riscv/boot/dts/tenstorrent/blackhole.dtsi     | 108 +++++++++++++++++++++
 arch/riscv/configs/defconfig                       |   1 +
 12 files changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/riscv/tenstorrent.yaml
 create mode 100644 arch/riscv/boot/dts/tenstorrent/Makefile
 create mode 100644 arch/riscv/boot/dts/tenstorrent/blackhole-card.dts
 create mode 100644 arch/riscv/boot/dts/tenstorrent/blackhole.dtsi

I pulled this one manually as you had the wrong URL here, please use an https:// url for git pull. You can do this e.g. by adding

[url "https://github.com"]
insteadOf = [email protected]:

to your .gitconfig.

Arnd

Sorry about that. I will make sure I give the correct url next time.

Thanks,
Drew