phy: Add MSM8996 support to Qualcomm QUSB2 phy
Subsystems (2)
PATCH 1/1 phy: Add MSM8996 support to Qualcomm QUSB2 phy
From: Biswapriyo Nath <[email protected]>
This change is imported from Linux driver and tested with SM6125 SoC. Note, the msm8996_phy_cfg struct is same as sdm660_phy_cfg but qusb2_phy_cfg::se_clk_scheme_default differs only.
---
drivers/phy/qcom/phy-qcom-qusb2.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/phy/qcom/phy-qcom-qusb2.c +14 -0
@@ -224,6 +224,18 @@ static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; +static const struct qusb2_phy_cfg msm8996_phy_cfg = { + .tbl = msm8996_init_tbl, + .tbl_num =ARRAY_SIZE (msm8996_init_tbl), + .regs = sm6115_regs_layout, + + .has_pll_test = true, + .se_clk_scheme_default = true, + .disable_ctrl = (CLAMP_N_EN |FREEZIO_N |POWER_DOWN ), + .mask_core_ready =PLL_LOCKED , + .autoresume_en =BIT (3 ), +}; +static const struct qusb2_phy_cfg sm6115_phy_cfg = { .tbl = sm6115_init_tbl, .tbl_num =ARRAY_SIZE (sm6115_init_tbl),
@@ -450,6 +462,8 @@ static struct phy_ops qusb2phy_ops = { };static const struct udevice_id qusb2phy_ids[] = { + { .compatible ="qcom,msm8996-qusb2-phy" , + .data = (ulong)&msm8996_phy_cfg }, { .compatible ="qcom,qusb2-phy" }, { .compatible ="qcom,qcm2290-qusb2-phy" , .data = (ulong)&sm6115_phy_cfg },
Signature · 4 lines
2.52.0 base-commit: c7c2c3c0101f625c01bf101d652e03a6d4aa950f branch: master
Quoted 11 lines · On Sun, Dec 07, 2025 at 06:49:19PM +0000, [email protected] wrote:
From: Biswapriyo Nath <[email protected]>
This change is imported from Linux driver and tested with SM6125 SoC. Note, the
msm8996_phy_cfgstruct is same assdm660_phy_cfgbutqusb2_phy_cfg::se_clk_scheme_defaultdiffers only.Signed-off-by Biswapriyo Nath <[email protected]>---
drivers/phy/qcom/phy-qcom-qusb2.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
-Sumit
Quoted 38 lines
drivers/phy/qcom/phy-qcom-qusb2.c +14
-0@@ -224,6 +224,18 @@ static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; +static const struct qusb2_phy_cfg msm8996_phy_cfg = { + .tbl = msm8996_init_tbl, + .tbl_num =ARRAY_SIZE (msm8996_init_tbl), + .regs = sm6115_regs_layout, + + .has_pll_test = true, + .se_clk_scheme_default = true, + .disable_ctrl = (CLAMP_N_EN |FREEZIO_N |POWER_DOWN ), + .mask_core_ready =PLL_LOCKED , + .autoresume_en =BIT (3 ), +}; +static const struct qusb2_phy_cfg sm6115_phy_cfg = { .tbl = sm6115_init_tbl, .tbl_num =ARRAY_SIZE (sm6115_init_tbl),@@ -450,6 +462,8 @@ static struct phy_ops qusb2phy_ops = { };static const struct udevice_id qusb2phy_ids[] = { + { .compatible ="qcom,msm8996-qusb2-phy" , + .data = (ulong)&msm8996_phy_cfg }, { .compatible ="qcom,qusb2-phy" }, { .compatible ="qcom,qcm2290-qusb2-phy" , .data = (ulong)&sm6115_phy_cfg },Signature · 4 lines
2.52.0 base-commit: c7c2c3c0101f625c01bf101d652e03a6d4aa950f branch: master
Hi Biswapriyo,
Quoted 7 lines · On 12/7/25 19:49, [email protected] wrote:
From: Biswapriyo Nath <[email protected]>
This change is imported from Linux driver and tested with SM6125 SoC. Note, the
msm8996_phy_cfgstruct is same assdm660_phy_cfgbutqusb2_phy_cfg::se_clk_scheme_defaultdiffers only.Signed-off-by Biswapriyo Nath <[email protected]>
Thanks for this! Excited to see sm6125 support :D
Quoted 37 lines
---
drivers/phy/qcom/phy-qcom-qusb2.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/phy/qcom/phy-qcom-qusb2.c +14
-0@@ -224,6 +224,18 @@ static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; +static const struct qusb2_phy_cfg msm8996_phy_cfg = { + .tbl = msm8996_init_tbl, + .tbl_num =ARRAY_SIZE (msm8996_init_tbl), + .regs = sm6115_regs_layout, + + .has_pll_test = true, + .se_clk_scheme_default = true, + .disable_ctrl = (CLAMP_N_EN |FREEZIO_N |POWER_DOWN ), + .mask_core_ready =PLL_LOCKED , + .autoresume_en =BIT (3 ), +}; +static const struct qusb2_phy_cfg sm6115_phy_cfg = { .tbl = sm6115_init_tbl, .tbl_num =ARRAY_SIZE (sm6115_init_tbl),@@ -450,6 +462,8 @@ static struct phy_ops qusb2phy_ops = { };static const struct udevice_id qusb2phy_ids[] = { + { .compatible ="qcom,msm8996-qusb2-phy" , + .data = (ulong)&msm8996_phy_cfg }, { .compatible ="qcom,qusb2-phy" }, { .compatible ="qcom,qcm2290-qusb2-phy" , .data = (ulong)&sm6115_phy_cfg },
Casey Connolly
AppliedQuoted 5 lines · On Sun, 07 Dec 2025 18:49:19 +0000, [email protected] wrote:
This change is imported from Linux driver and tested with SM6125 SoC. Note, the
msm8996_phy_cfgstruct is same assdm660_phy_cfgbutqusb2_phy_cfg::se_clk_scheme_defaultdiffers only.
Applied, thanks!
[1/1] phy: Add MSM8996 support to Qualcomm QUSB2 phy
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/4ad3992cc357
Best regards,
Signature · 1 line
// Casey (she/they)