travis-ci: Add config for QEMU m68k virt machine
PATCH v2 1/1 travis-ci: Add config for QEMU m68k virt machine
Add the configuration file required to run tests for the QEMU m68k 'virt' board. This setup uses 'qemu-system-m68k' with the '-M virt' machine type and '-cpu m68040'.
---
Changes in v2:
- Rename to conf.qemu-m68k_na
bin/travis-ci/conf.qemu-m68k_na | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 bin/travis-ci/conf.qemu-m68k_na
bin/travis-ci/conf.qemu-m68k_na new file +28 -0
@@ -0,0 +1,28 @@ +# Copyright (c) 2025 Kuan-Wei Chiu <[email protected]> +# +# Permission is hereby granted, free of charge, to any person obtaining a +# copy of this software and associated documentation files (the "Software"), +# to deal in the Software without restriction, including without limitation +# the rights to use, copy, modify, merge, publish, distribute, sublicense, +# and/or sell copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +# DEALINGS IN THE SOFTWARE. + +console_impl=qemu +qemu_machine="virt" +qemu_binary="qemu-system-m68k" +qemu_cpu="m68040" +qemu_extra_args="-nographic" +qemu_kernel_args="-kernel ${U_BOOT_BUILD_DIR}/u-boot" +reset_impl=none +flash_impl=none
Signature · 1 line
2.52.0.358.g0dd7633a29-goog
Quoted 4 lines · Kuan-Wei Chiu
Add the configuration file required to run tests for the QEMU m68k 'virt' board. This setup uses 'qemu-system-m68k' with the '-M virt' machine type and '-cpu m68040'.
Quoted 8 lines
Signed-off-by Kuan-Wei Chiu <[email protected]>---
Changes in v2:
- Rename to conf.qemu-m68k_nabin/travis-ci/conf.qemu-m68k_na | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 bin/travis-ci/conf.qemu-m68k_na
It would be good, but not a big deal either way, to also leverage py/travis-ci/u_boot_boardenv_M5208EVBE_qemu.py here. And I say "would be good" because really, we need because I'm not sure it will add any coverage over what we have today.
Signature · 1 line
Tom
Hi Tom,
Quoted 11 lines · Tom Rini
Quoted 9 lines · Kuan-Wei Chiu
Add the configuration file required to run tests for the QEMU m68k 'virt' board. This setup uses 'qemu-system-m68k' with the '-M virt' machine type and '-cpu m68040'.
Signed-off-by Kuan-Wei Chiu <[email protected]>---
Changes in v2:
- Rename to conf.qemu-m68k_na
Quoted 8 lines
Quoted 3 lines
bin/travis-ci/conf.qemu-m68k_na | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 bin/travis-ci/conf.qemu-m68k_naIt would be good, but not a big deal either way, to also leverage
py/travis-ci/u_boot_boardenv_M5208EVBE_qemu.pyhere. And I say "would be good" because really, we need because I'm not sure it will add any coverage over what we have today.
I checked py/travis-ci/u_boot_boardenv_M5208EVBE_qemu.py and it appears to be primarily for network-related tests. Since I haven't implemented virtIO mmio support for network access yet, I think it would be better to introduce such tests in future along with the network support?
Regards,
Kuan-Wei
Quoted 23 lines · Kuan-Wei Chiu
Hi Tom,
Quoted 11 lines · Tom Rini
Quoted 9 lines · Kuan-Wei Chiu
Add the configuration file required to run tests for the QEMU m68k 'virt' board. This setup uses 'qemu-system-m68k' with the '-M virt' machine type and '-cpu m68040'.
Signed-off-by Kuan-Wei Chiu <[email protected]>---
Changes in v2:
- Rename to conf.qemu-m68k_naQuoted 8 lines
Quoted 3 lines
bin/travis-ci/conf.qemu-m68k_na | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 bin/travis-ci/conf.qemu-m68k_naIt would be good, but not a big deal either way, to also leverage
py/travis-ci/u_boot_boardenv_M5208EVBE_qemu.pyhere. And I say "would be good" because really, we need because I'm not sure it will add any coverage over what we have today.
Quoted 4 lines
I checked
py/travis-ci/u_boot_boardenv_M5208EVBE_qemu.pyand it appears to be primarily for network-related tests. Since I haven't implemented virtIO mmio support for network access yet, I think it would be better to introduce such tests in future along with the network support?
Indeed, I just assumed networking was present in your patches, so later here is correct.
Signature · 1 line
Tom
Quoted 5 lines · Kuan-Wei Chiu
Add the configuration file required to run tests for the QEMU m68k 'virt' board. This setup uses 'qemu-system-m68k' with the '-M virt' machine type and '-cpu m68040'.
Applied to u-boot/u-boot-test-hooks.git/master, thanks!
[1/1] travis-ci: Add config for QEMU m68k virt machine
commit: 6cc3d2d90f12610f57d974b3d3295968c907e066
Signature · 1 line
Tom