Skip to contentSkip to conversation

perf test: Small improvements

PATCH Applied Namhyung Kim 4 participants 13 messages Mar 4, 2025 – Mar 6, 2025 perf events

lore
Share & tools
lore

Namhyung Kim

author maintainer
#0 lore raw

v2 cover perf test: Small improvements

Hello,

This is an assorted list of changes in the perf test.

I've added perf stat --metric-only test and perf trace record and replay. And other changes to skip privileged tests for non-root and simplify data symbol test.

v2 changes)
* fix shellcheck errors
* simplify datasym test with timeout

Thanks,
Namhyung

Namhyung Kim (6):
perf test: Add --metric-only to perf stat output tests perf test: Skip perf probe tests when running as non-root perf test: Skip perf trace tests when running as non-root perf test: Add trace record and replay test
perf test: Add timeout to datasym workload
perf test: Simplify data symbol test

 .../tests/shell/lib/perf_json_output_lint.py  |  7 ++++++
 tools/perf/tests/shell/lib/stat_output.sh     |  8 +++++++
 .../tests/shell/perftool-testsuite_probe.sh   |  1 +
 tools/perf/tests/shell/probe_vfs_getname.sh   |  1 +
 .../shell/record+probe_libc_inet_pton.sh      |  1 +
 .../shell/record+script_probe_vfs_getname.sh  |  1 +
 tools/perf/tests/shell/stat+csv_output.sh     |  2 ++
 tools/perf/tests/shell/stat+json_output.sh    |  9 ++++++++
 tools/perf/tests/shell/stat+std_output.sh     |  8 +++++++
 tools/perf/tests/shell/test_data_symbol.sh    | 15 ++----------
 .../shell/test_uprobe_from_different_cu.sh    | 11 ++++-----
 .../tests/shell/trace+probe_vfs_getname.sh    |  1 +
 tools/perf/tests/shell/trace_btf_enum.sh      |  1 +
 tools/perf/tests/shell/trace_btf_general.sh   |  1 +
 tools/perf/tests/shell/trace_exit_race.sh     |  1 +
 tools/perf/tests/shell/trace_record_replay.sh | 21 +++++++++++++++++
 tools/perf/tests/workloads/datasym.c          | 23 +++++++++++++++++--
 17 files changed, 91 insertions(+), 21 deletions(-)
 create mode 100755 tools/perf/tests/shell/trace_record_replay.sh
Signature · 1 line
2.48.1.711.g2feabab25a-goog
author maintainer
#1 lore raw

PATCH v2 1/6 perf test: Add --metric-only to perf stat output tests

Add a test case for --metric-only for std, csv, json output mode using shadow IPC metric from instructions and cycles events. It should produce 'insn per cycle' metric.

But currently JSON output has (none) 'GHz' as well. It looks like a bug but I don't have enough time to debug it for now so I made it pass. :(

  $ perf stat --metric-only -e instructions,cycles true

Performance counter stats for 'true':

                    0.56

         0.002127319 seconds time elapsed

         0.002077000 seconds user
         0.000000000 seconds sys
  $ perf stat -x, --metric-only -e instructions,cycles true

0.55,,

  $ perf stat -j --metric-only -e instructions,cycles true
  {"insn per cycle" : "0.53", "GHz" : "none"}
  $ perf test output -v
    5: Test data source output                                         : Ok
   31: Sort output of hist entries                                     : Ok
   88: perf stat CSV output linter                                     : Ok
   90: perf stat JSON output linter                                    : Ok
   92: perf stat STD output linter                                     : Ok
---
 tools/perf/tests/shell/lib/perf_json_output_lint.py | 7 +++++++
 tools/perf/tests/shell/lib/stat_output.sh           | 8 ++++++++
 tools/perf/tests/shell/stat+csv_output.sh           | 2 ++
 tools/perf/tests/shell/stat+json_output.sh          | 9 +++++++++
 tools/perf/tests/shell/stat+std_output.sh           | 8 ++++++++
 5 files changed, 34 insertions(+)
tools/perf/tests/shell/lib/perf_json_output_lint.py +7 -0
index b066d721f89735df..9e772a89ce381636 100644
@@ -19,6 +19,7 @@ ap.add_argument('--per-cluster', action='store_true')
 ap.add_argument('--per-die', action='store_true')
 ap.add_argument('--per-node', action='store_true')
 ap.add_argument('--per-socket', action='store_true')
+ap.add_argument('--metric-only', action='store_true')
 ap.add_argument('--file', type=argparse.FileType('r'), default=sys.stdin)
 args = ap.parse_args()
 
@@ -64,6 +65,8 @@ Lines = args.file.readlines()
       'socket': lambda x: True,
       'thread': lambda x: True,
       'unit': lambda x: True,
+      'insn per cycle': lambda x: isfloat(x),
+      'GHz': lambda x: True,  # FIXME: it seems unintended for --metric-only
   }
   input = '[\n' + ','.join(Lines) + '\n]'
   for item in json.loads(input):
@@ -78,6 +81,8 @@ Lines = args.file.readlines()
         pass
       elif count - 1 in expected_items and 'metric-threshold' in item:
           pass
+      elif count in expected_items and 'insn per cycle' in item:
+          pass
       elif count not in expected_items:
         raise RuntimeError(f'wrong number of fields. counted {count} expected {expected_items}'
                            f' in \'{item}\'')
@@ -95,6 +100,8 @@ Lines = args.file.readlines()
     expected_items = [6, 8]
   elif args.per_core or args.per_socket or args.per_node or args.per_die or args.per_cluster or args.per_cache:
     expected_items = [7, 9]
+  elif args.metric_only:
+    expected_items = [1, 2]
   else:
     # If no option is specified, don't check the number of items.
     expected_items = -1
tools/perf/tests/shell/lib/stat_output.sh +8 -0
index 9a176ceae4a3c3a2..4d4aac547f0109d1 100644
@@ -148,6 +148,14 @@ check_per_socket()
 	echo "[Success]"
 }
 
+check_metric_only()
+{
+	echo -n "Checking $1 output: metric only "
+	perf stat --metric-only $2 -e instructions,cycles true
+	commachecker --metric-only
+	echo "[Success]"
+}
+
 # The perf stat options for per-socket, per-core, per-die
 # and -A ( no_aggr mode ) uses the info fetched from this
 # directory: "/sys/devices/system/cpu/cpu*/topology". For
tools/perf/tests/shell/stat+csv_output.sh +2 -0
index fc2d8cc6e5e0b1e5..7a6f6e1774028322 100755
@@ -44,6 +44,7 @@ function commachecker()
 	;; "--per-die")		exp=8
 	;; "--per-cluster")	exp=8
 	;; "--per-cache")	exp=8
+	;; "--metric-only")	exp=2
 	esac
 
 	while read line
@@ -75,6 +76,7 @@ check_interval "CSV" "$perf_cmd"
 check_event "CSV" "$perf_cmd"
 check_per_thread "CSV" "$perf_cmd"
 check_per_node "CSV" "$perf_cmd"
+check_metric_only "CSV" "$perf_cmd"
 if [ $skip_test -ne 1 ]
 then
 	check_system_wide_no_aggr "CSV" "$perf_cmd"
tools/perf/tests/shell/stat+json_output.sh +9 -0
index 6b630d33c3287899..a4f257ea839e1368 100755
@@ -173,6 +173,14 @@ check_per_socket()
 	echo "[Success]"
 }
 
+check_metric_only()
+{
+	echo -n "Checking json output: metric only "
+	perf stat -j --metric-only -e instructions,cycles -o "${stat_output}" true
+	$PYTHON $pythonchecker --metric-only --file "${stat_output}"
+	echo "[Success]"
+}
+
 # The perf stat options for per-socket, per-core, per-die
 # and -A ( no_aggr mode ) uses the info fetched from this
 # directory: "/sys/devices/system/cpu/cpu*/topology". For
@@ -207,6 +215,7 @@ check_interval
 check_event
 check_per_thread
 check_per_node
+check_metric_only
 if [ $skip_test -ne 1 ]
 then
 	check_system_wide_no_aggr
tools/perf/tests/shell/stat+std_output.sh +8 -0
index 0f7967be60afdc7d..6fee67693ba7a9be 100755
@@ -30,6 +30,7 @@ trap trap_cleanup EXIT TERM INT
 function commachecker()
 {
 	local prefix=1
+	local -i metric_only=0
 
 	case "$1"
 	in "--interval")	prefix=2
@@ -41,6 +42,7 @@ function commachecker()
 	;; "--per-die")		prefix=3
 	;; "--per-cache")	prefix=3
 	;; "--per-cluster")	prefix=3
+	;; "--metric-only")	metric_only=1
 	esac
 
 	while read line
@@ -60,6 +62,9 @@ function commachecker()
 		x=${main_body%#*}
 		[ "$x" = "" ] && continue
 
+		# Check metric only - if it has a non-empty result
+		[ $metric_only -eq 1 ] && return 0
+
 		# Skip metrics without event name
 		y=${main_body#*#}
 		for i in "${!skip_metric[@]}"; do
@@ -84,6 +89,8 @@ function commachecker()
 			exit 1;
 		}
 	done < "${stat_output}"
+
+	[ $metric_only -eq 1 ] && exit 1
 	return 0
 }
 
@@ -95,6 +102,7 @@ check_system_wide "STD" "$perf_cmd"
 check_interval "STD" "$perf_cmd"
 check_per_thread "STD" "$perf_cmd"
 check_per_node "STD" "$perf_cmd"
+check_metric_only "STD" "$perf_cmd"
 if [ $skip_test -ne 1 ]
 then
 	check_system_wide_no_aggr "STD" "$perf_cmd"
Signature · 1 line
2.48.1.711.g2feabab25a-goog
author maintainer
#2 lore raw

PATCH v2 2/6 perf test: Skip perf probe tests when running as non-root

In reply to Namhyung Kim

perf trace requires root because it needs to use [ku]probes. Skip those test when it's not run as root.

Before:

  $ perf test probe
   47: Probe SDT events                                                : Ok
  104: test perf probe of function from different CU                   : FAILED!
  115: perftool-testsuite_probe                                        : FAILED!
  117: Add vfs_getname probe to get syscall args filenames             : FAILED!
  118: probe libc's inet_pton & backtrace it with ping                 : FAILED!
  119: Use vfs_getname probe to get syscall args filenames             : FAILED!

After:

  $ perf test probe
   47: Probe SDT events                                                : Ok
  104: test perf probe of function from different CU                   : Skip
  115: perftool-testsuite_probe                                        : Skip
  117: Add vfs_getname probe to get syscall args filenames             : Skip
  118: probe libc's inet_pton & backtrace it with ping                 : Skip
  119: Use vfs_getname probe to get syscall args filenames             : Skip
Cc Masami Hiramatsu <[email protected]>
---
 tools/perf/tests/shell/perftool-testsuite_probe.sh    |  1 +
 tools/perf/tests/shell/probe_vfs_getname.sh           |  1 +
 tools/perf/tests/shell/record+probe_libc_inet_pton.sh |  1 +
 .../tests/shell/record+script_probe_vfs_getname.sh    |  1 +
 .../perf/tests/shell/test_uprobe_from_different_cu.sh | 11 +++++------
 5 files changed, 9 insertions(+), 6 deletions(-)
tools/perf/tests/shell/perftool-testsuite_probe.sh +1 -0
index 7b1bfd0f888fc30c..3863df16c19b9fa2 100755
@@ -2,6 +2,7 @@
 # perftool-testsuite_probe (exclusive)
 # SPDX-License-Identifier: GPL-2.0
 
+[ "$(id -u)" = 0 ] || exit 2
 test -d "$(dirname "$0")/base_probe" || exit 2
 cd "$(dirname "$0")/base_probe" || exit 2
 status=0
tools/perf/tests/shell/probe_vfs_getname.sh +1 -0
index 0c5aacc446b3ef76..c51a32931af6313e 100755
@@ -8,6 +8,7 @@
 . "$(dirname $0)"/lib/probe.sh
 
 skip_if_no_perf_probe || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 # shellcheck source=lib/probe_vfs_getname.sh
 . "$(dirname $0)"/lib/probe_vfs_getname.sh
tools/perf/tests/shell/record+probe_libc_inet_pton.sh +1 -0
index d5e5193cceb625fd..c4bab5b5cc59f0b3 100755
@@ -105,6 +105,7 @@ delete_libc_inet_pton_event() {
 
 # Check for IPv6 interface existence
 ip a sh lo | grep -F -q inet6 || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 skip_if_no_perf_probe && \
 add_libc_inet_pton_event && \
tools/perf/tests/shell/record+script_probe_vfs_getname.sh +1 -0
index 5940fdc1df37c502..fd5b10d469158b65 100755
@@ -13,6 +13,7 @@
 . "$(dirname "$0")/lib/probe.sh"
 
 skip_if_no_perf_probe || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 # shellcheck source=lib/probe_vfs_getname.sh
 . "$(dirname "$0")/lib/probe_vfs_getname.sh"
tools/perf/tests/shell/test_uprobe_from_different_cu.sh +5 -6
index 33387c329f92b6ed..7adf9755d6de240e 100755
@@ -4,12 +4,11 @@
 
 set -e
 
-# Skip if there's no probe command.
-if ! perf | grep probe
-then
-        echo "Skip: probe command isn't present"
-        exit 2
-fi
+# shellcheck source=lib/probe.sh
+. "$(dirname $0)"/lib/probe.sh
+
+skip_if_no_perf_probe || exit 2
+[ "$(id -u)" == 0 ] || exit 2
 
 # skip if there's no gcc
 if ! [ -x "$(command -v gcc)" ]; then
Signature · 1 line
2.48.1.711.g2feabab25a-goog
author maintainer
#3 lore raw

PATCH v2 3/6 perf test: Skip perf trace tests when running as non-root

In reply to Namhyung Kim

perf trace requires root because it needs to use tracepoints and BPF. Skip those test when it's not run as root.

Before:

  $ perf test trace
   15: Parse sched tracepoints fields                                  : Skip (permissions)
   80: perf ftrace tests                                               : Skip
  105: perf trace enum augmentation tests                              : FAILED!
  106: perf trace BTF general tests                                    : FAILED!
  107: perf trace exit race                                            : FAILED!
  118: probe libc's inet_pton & backtrace it with ping                 : Skip
  125: Check Arm CoreSight trace data recording and synthesized samples: Skip
  127: Check Arm SPE trace data recording and synthesized samples      : Skip
  132: Check open filename arg using perf trace + vfs_getname          : FAILED!

After:

  $ perf test trace
   15: Parse sched tracepoints fields                                  : Skip (permissions)
   80: perf ftrace tests                                               : Skip
  105: perf trace enum augmentation tests                              : Skip
  106: perf trace BTF general tests                                    : Skip
  107: perf trace exit race                                            : Skip
  118: probe libc's inet_pton & backtrace it with ping                 : Skip
  125: Check Arm CoreSight trace data recording and synthesized samples: Skip
  127: Check Arm SPE trace data recording and synthesized samples      : Skip
  132: Check open filename arg using perf trace + vfs_getname          : Skip
---
 tools/perf/tests/shell/trace+probe_vfs_getname.sh | 1 +
 tools/perf/tests/shell/trace_btf_enum.sh          | 1 +
 tools/perf/tests/shell/trace_btf_general.sh       | 1 +
 tools/perf/tests/shell/trace_exit_race.sh         | 1 +
 4 files changed, 4 insertions(+)
tools/perf/tests/shell/trace+probe_vfs_getname.sh +1 -0
index 708a13f006353611..60fccb62c5403ee9 100755
@@ -15,6 +15,7 @@
 
 skip_if_no_perf_probe || exit 2
 skip_if_no_perf_trace || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 . "$(dirname $0)"/lib/probe_vfs_getname.sh
 
tools/perf/tests/shell/trace_btf_enum.sh +1 -0
index 8d1e6bbeac906843..60b3fa254cf6c7bc 100755
@@ -13,6 +13,7 @@ TESTPROG="perf test -w landlock"
 # shellcheck source=lib/probe.sh
 . "$(dirname $0)"/lib/probe.sh
 skip_if_no_perf_trace || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 check_vmlinux() {
   echo "Checking if vmlinux exists"
tools/perf/tests/shell/trace_btf_general.sh +1 -0
index e9ee727f3433eaba..a25d8744695e6fef 100755
@@ -76,6 +76,7 @@ trace_config() {
 
 skip_if_no_perf_trace || exit 2
 check_vmlinux || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 trace_config
 
tools/perf/tests/shell/trace_exit_race.sh +1 -0
index fbb0adc33a889516..1e247693e756d439 100755
@@ -10,6 +10,7 @@
 . "$(dirname $0)"/lib/probe.sh
 
 skip_if_no_perf_trace || exit 2
+[ "$(id -u)" = 0 ] || exit 2
 
 if [ "$1" = "-v" ]; then
 	verbose="1"
Signature · 1 line
2.48.1.711.g2feabab25a-goog
author maintainer
#4 lore raw

PATCH v2 4/6 perf test: Add trace record and replay test

In reply to Namhyung Kim

It just check trace record and replay could display correct output. It uses 'sleep' process and sees there's a clock_nanosleep syscall.

  $ sudo perf test -vv replay
  108: perf trace record and replay:
  --- start ---
  test child forked, pid 1563219
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.077 MB /tmp/temporary_file.w1ApA (242 samples) ]
       0.686 (1000.068 ms): sleep/1563226 clock_nanosleep(rqtp: 0x7ffc20ffee10, rmtp: 0x7ffc20ffee50)           = 0
  ---- end(0) ----
  108: perf trace record and replay                                    : Ok
---
 tools/perf/tests/shell/trace_record_replay.sh | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100755 tools/perf/tests/shell/trace_record_replay.sh
tools/perf/tests/shell/trace_record_replay.sh new file +21 -0
new file mode 100755
index 0000000000000000..6b4ed863c1ef8679
@@ -0,0 +1,21 @@
+#!/bin/sh
+# perf trace record and replay
+# SPDX-License-Identifier: GPL-2.0
+
+# Check that perf trace works with record and replay
+
+# shellcheck source=lib/probe.sh
+. "$(dirname $0)"/lib/probe.sh
+
+skip_if_no_perf_trace || exit 2
+[ "$(id -u)" = 0 ] || exit 2
+
+file=$(mktemp /tmp/temporary_file.XXXXX)
+
+perf trace record -o ${file} sleep 1 || exit 1
+if ! perf trace -i ${file} 2>&1 | grep nanosleep; then
+	echo "Failed: cannot find *nanosleep syscall"
+	exit 1
+fi
+
+rm -f ${file}
Signature · 1 line
2.48.1.711.g2feabab25a-goog
author maintainer
#5 lore raw

PATCH v2 5/6 perf test: Add timeout to datasym workload

In reply to Namhyung Kim

Unlike others it has an infinite loop that make it annoying to call. Make it finish after 1 second and handle command-line argument to change the setting.

Cc Thomas Richter <[email protected]>
Cc Leo Yan <[email protected]>
---
 tools/perf/tests/workloads/datasym.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
tools/perf/tests/workloads/datasym.c +21 -2
index 8e08fc75a973e5f7..8ddb2aa6a049e343 100644
@@ -1,3 +1,6 @@
+#include <stdlib.h>
+#include <signal.h>
+#include <unistd.h>
 #include <linux/compiler.h>
 #include "../tests.h"
 
@@ -12,9 +15,25 @@ static buf buf1 = {
 	.reserved[0] = 1,
 };
 
-static int datasym(int argc __maybe_unused, const char **argv __maybe_unused)
+static volatile sig_atomic_t done;
+
+static void sighandler(int sig __maybe_unused)
+{
+	done = 1;
+}
+
+static int datasym(int argc, const char **argv)
 {
-	for (;;) {
+	int sec = 1;
+
+	if (argc > 0)
+		sec = atoi(argv[0]);
+
+	signal(SIGINT, sighandler);
+	signal(SIGALRM, sighandler);
+	alarm(sec);
+
+	while (!done) {
 		buf1.data1++;
 		if (buf1.data1 == 123) {
 			/*
Signature · 1 line
2.48.1.711.g2feabab25a-goog
Tested-by on v2 5/6
#6 lore raw

Re: [PATCH v2 5/6] perf test: Add timeout to datasym workload

Quoted 40 lines · Namhyung Kim

Unlike others it has an infinite loop that make it annoying to call. Make it finish after 1 second and handle command-line argument to change the setting.

Cc Thomas Richter <[email protected]>
Cc Leo Yan <[email protected]>
---
 tools/perf/tests/workloads/datasym.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
tools/perf/tests/workloads/datasym.c +14 -2
index 8e08fc75a973e5f7..8ddb2aa6a049e343 100644
@@ -1,3 +1,6 @@
+#include <stdlib.h>
+#include <signal.h>
+#include <unistd.h>
 #include <linux/compiler.h>
 #include "../tests.h"
 
@@ -12,9 +15,25 @@ static buf buf1 = {
 	.reserved[0] = 1,
 };
 
-static int datasym(int argc __maybe_unused, const char **argv __maybe_unused)
+static volatile sig_atomic_t done;
+
+static void sighandler(int sig __maybe_unused)
+{
+	done = 1;
+}
+
+static int datasym(int argc, const char **argv)
 {
-	for (;;) {
+	int sec = 1;
+
+	if (argc > 0)

tools/perf/tests/workloads/datasym.c static buf buf1 = { · line 39

Quoted 10 lines
tools/perf/tests/workloads/datasym.c +7 -0
+		sec = atoi(argv[0]);
+
+	signal(SIGINT, sighandler);
+	signal(SIGALRM, sighandler);
+	alarm(sec);
+
+	while (!done) {
 		buf1.data1++;
 		if (buf1.data1 == 123) {
 			/*
Signature · 9 lines
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany
--
IBM Deutschland Research & Development GmbH

Vorsitzender des Aufsichtsrats: Wolfgang Wendt

Geschäftsführung: David Faller

Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294
Reviewed-by on v2 5/6
#7 lore raw

Re: [PATCH v2 5/6] perf test: Add timeout to datasym workload

In reply to Namhyung Kim
Quoted 7 lines · Namhyung Kim

Unlike others it has an infinite loop that make it annoying to call. Make it finish after 1 second and handle command-line argument to change the setting.

Cc Thomas Richter <[email protected]>
Cc Leo Yan <[email protected]>
Quoted 46 lines
---
 tools/perf/tests/workloads/datasym.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
tools/perf/tests/workloads/datasym.c +21 -2
index 8e08fc75a973e5f7..8ddb2aa6a049e343 100644
@@ -1,3 +1,6 @@
+#include <stdlib.h>
+#include <signal.h>
+#include <unistd.h>
 #include <linux/compiler.h>
 #include "../tests.h"
 
@@ -12,9 +15,25 @@ static buf buf1 = {
 	.reserved[0] = 1,
 };
 
-static int datasym(int argc __maybe_unused, const char **argv __maybe_unused)
+static volatile sig_atomic_t done;
+
+static void sighandler(int sig __maybe_unused)
+{
+	done = 1;
+}
+
+static int datasym(int argc, const char **argv)
 {
-	for (;;) {
+	int sec = 1;
+
+	if (argc > 0)
+		sec = atoi(argv[0]);
+
+	signal(SIGINT, sighandler);
+	signal(SIGALRM, sighandler);
+	alarm(sec);
+
+	while (!done) {
 		buf1.data1++;
 		if (buf1.data1 == 123) {
 			/*
Signature · 1 line
2.48.1.711.g2feabab25a-goog
author maintainer
#8 lore raw

PATCH v2 6/6 perf test: Simplify data symbol test

In reply to Namhyung Kim

Now the workload will end after 1 second. Just run it with perf instead of waiting for the background process.

Cc Thomas Richter <[email protected]>
Cc Leo Yan <[email protected]>
---
 tools/perf/tests/shell/test_data_symbol.sh | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)
tools/perf/tests/shell/test_data_symbol.sh +2 -13
index c86da02350596b35..1792b7ad4066f8cd 100755
@@ -5,8 +5,6 @@
 # Leo Yan <[email protected]>, 2022
 
 shelldir=$(dirname "$0")
-# shellcheck source=lib/waiting.sh
-. "${shelldir}"/lib/waiting.sh
 
 # shellcheck source=lib/perf_has_symbol.sh
 . "${shelldir}"/lib/perf_has_symbol.sh
@@ -60,19 +58,10 @@ echo "Recording workload..."
 # specific CPU and test in per-CPU mode.
 is_amd=$(grep -E -c 'vendor_id.*AuthenticAMD' /proc/cpuinfo)
 if (($is_amd >= 1)); then
-	perf mem record -vvv -o ${PERF_DATA} -C 0 -- taskset -c 0 $TEST_PROGRAM 2>"${ERR_FILE}" &
+	perf mem record -vvv -o ${PERF_DATA} -C 0 -- taskset -c 0 $TEST_PROGRAM 2>"${ERR_FILE}"
 else
-	perf mem record -vvv --all-user -o ${PERF_DATA} -- $TEST_PROGRAM 2>"${ERR_FILE}" &
+	perf mem record -vvv --all-user -o ${PERF_DATA} -- $TEST_PROGRAM 2>"${ERR_FILE}"
 fi
 
-PERFPID=$!
-
-wait_for_perf_to_start ${PERFPID} "${ERR_FILE}"
-
-sleep 1
-
-kill $PERFPID
-wait $PERFPID
-
 check_result
 exit $?
Signature · 1 line
2.48.1.711.g2feabab25a-goog
Tested-by on v2 6/6
#9 lore raw

Re: [PATCH v2 6/6] perf test: Simplify data symbol test

Quoted 35 lines · Namhyung Kim

Now the workload will end after 1 second. Just run it with perf instead of waiting for the background process.

Cc Thomas Richter <[email protected]>
Cc Leo Yan <[email protected]>
---
 tools/perf/tests/shell/test_data_symbol.sh | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)
tools/perf/tests/shell/test_data_symbol.sh +2 -5
index c86da02350596b35..1792b7ad4066f8cd 100755
@@ -5,8 +5,6 @@
 # Leo Yan <[email protected]>, 2022
 
 shelldir=$(dirname "$0")
-# shellcheck source=lib/waiting.sh
-. "${shelldir}"/lib/waiting.sh
 
 # shellcheck source=lib/perf_has_symbol.sh
 . "${shelldir}"/lib/perf_has_symbol.sh
@@ -60,19 +58,10 @@ echo "Recording workload..."
 # specific CPU and test in per-CPU mode.
 is_amd=$(grep -E -c 'vendor_id.*AuthenticAMD' /proc/cpuinfo)
 if (($is_amd >= 1)); then
-	perf mem record -vvv -o ${PERF_DATA} -C 0 -- taskset -c 0 $TEST_PROGRAM 2>"${ERR_FILE}" &
+	perf mem record -vvv -o ${PERF_DATA} -C 0 -- taskset -c 0 $TEST_PROGRAM 2>"${ERR_FILE}"
 else
-	perf mem record -vvv --all-user -o ${PERF_DATA} -- $TEST_PROGRAM 2>"${ERR_FILE}" &
+	perf mem record -vvv --all-user -o ${PERF_DATA} -- $TEST_PROGRAM 2>"${ERR_FILE}"
 fi
 
-PERFPID=$!

tools/perf/tests/shell/test_data_symbol.sh echo "Recording workload..." · line 67

Quoted 10 lines
tools/perf/tests/shell/test_data_symbol.sh +0 -8
-
-wait_for_perf_to_start ${PERFPID} "${ERR_FILE}"
-
-sleep 1
-
-kill $PERFPID
-wait $PERFPID
-
 check_result
 exit $?
Signature · 9 lines
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany
--
IBM Deutschland Research & Development GmbH

Vorsitzender des Aufsichtsrats: Wolfgang Wendt

Geschäftsführung: David Faller

Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294
Reviewed-by on v2 6/6
#10 lore raw

Re: [PATCH v2 6/6] perf test: Simplify data symbol test

In reply to Namhyung Kim
Quoted 6 lines · Namhyung Kim

Now the workload will end after 1 second. Just run it with perf instead of waiting for the background process.

Cc Thomas Richter <[email protected]>
Cc Leo Yan <[email protected]>
Quoted 42 lines
---
 tools/perf/tests/shell/test_data_symbol.sh | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)
tools/perf/tests/shell/test_data_symbol.sh +2 -13
index c86da02350596b35..1792b7ad4066f8cd 100755
@@ -5,8 +5,6 @@
 # Leo Yan <[email protected]>, 2022
 
 shelldir=$(dirname "$0")
-# shellcheck source=lib/waiting.sh
-. "${shelldir}"/lib/waiting.sh
 
 # shellcheck source=lib/perf_has_symbol.sh
 . "${shelldir}"/lib/perf_has_symbol.sh
@@ -60,19 +58,10 @@ echo "Recording workload..."
 # specific CPU and test in per-CPU mode.
 is_amd=$(grep -E -c 'vendor_id.*AuthenticAMD' /proc/cpuinfo)
 if (($is_amd >= 1)); then
-	perf mem record -vvv -o ${PERF_DATA} -C 0 -- taskset -c 0 $TEST_PROGRAM 2>"${ERR_FILE}" &
+	perf mem record -vvv -o ${PERF_DATA} -C 0 -- taskset -c 0 $TEST_PROGRAM 2>"${ERR_FILE}"
 else
-	perf mem record -vvv --all-user -o ${PERF_DATA} -- $TEST_PROGRAM 2>"${ERR_FILE}" &
+	perf mem record -vvv --all-user -o ${PERF_DATA} -- $TEST_PROGRAM 2>"${ERR_FILE}"
 fi
 
-PERFPID=$!
-
-wait_for_perf_to_start ${PERFPID} "${ERR_FILE}"
-
-sleep 1
-
-kill $PERFPID
-wait $PERFPID
-
 check_result
 exit $?
Signature · 1 line
2.48.1.711.g2feabab25a-goog
Tested-by on the v2 series
#11 lore raw
In reply to Namhyung Kim
Quoted 9 lines · Namhyung Kim

Hello,

This is an assorted list of changes in the perf test.

I've added perf stat --metric-only test and perf trace record and replay.
And other changes to skip privileged tests for non-root and simplify data symbol test.

Quoted 7 lines

v2 changes)
* fix shellcheck errors
* simplify datasym test with timeout

Thanks,
Namhyung

Looks good on Alder Lake and Arrow Lake.

Quoted 30 lines

Namhyung Kim (6):
  perf test: Add --metric-only to perf stat output tests perf test: Skip perf probe tests when running as non-root perf test: Skip perf trace tests when running as non-root perf test: Add trace record and replay test
  perf test: Add timeout to datasym workload
  perf test: Simplify data symbol test

 .../tests/shell/lib/perf_json_output_lint.py  |  7 ++++++ tools/perf/tests/shell/lib/stat_output.sh     |  8 +++++++ .../tests/shell/perftool-testsuite_probe.sh   |  1 + tools/perf/tests/shell/probe_vfs_getname.sh   |  1 + .../shell/record+probe_libc_inet_pton.sh      |  1 + .../shell/record+script_probe_vfs_getname.sh  |  1 + tools/perf/tests/shell/stat+csv_output.sh     |  2 ++ tools/perf/tests/shell/stat+json_output.sh    |  9 ++++++++ tools/perf/tests/shell/stat+std_output.sh     |  8 +++++++

 tools/perf/tests/shell/test_data_symbol.sh    | 15 ++----------
 .../shell/test_uprobe_from_different_cu.sh    | 11 ++++-----
 .../tests/shell/trace+probe_vfs_getname.sh    |  1 +

 tools/perf/tests/shell/trace_btf_enum.sh      |  1 + tools/perf/tests/shell/trace_btf_general.sh   |  1 + tools/perf/tests/shell/trace_exit_race.sh     |  1 + tools/perf/tests/shell/trace_record_replay.sh | 21 +++++++++++++++++ tools/perf/tests/workloads/datasym.c          | 23
+++++++++++++++++--

 17 files changed, 91 insertions(+), 21 deletions(-)

 create mode 100755 tools/perf/tests/shell/trace_record_replay.sh

author maintainer Applied
#12 lore raw
In reply to Namhyung Kim
Quoted 11 lines · Namhyung Kim

This is an assorted list of changes in the perf test.

I've added perf stat --metric-only test and perf trace record and replay. And other changes to skip privileged tests for non-root and simplify data symbol test.

v2 changes)
* fix shellcheck errors
* simplify datasym test with timeout

[...]

Applied to perf-tools-next, thanks!

Best regards,
Namhyung