add reserved e820 ranges to the kdump kernel e820 table
Subsystems (4)
v9 cover add reserved e820 ranges to the kdump kernel e820 table
This patchset did three things:
a). Change the examination condition to avoid confusion
Following the commit <0e4c12b45aa8> ("x86/mm, resource: Use PAGE_KERNEL protection for ioremap of memory pages"), here it is really checking for the 'IORES_DESC_ACPI_*' values. Therefore, it is necessary to change the examination condition to avoid confusion.
b). add a new I/O resource descriptor 'IORES_DESC_RESERVED'
When doing kexec_file_load, the first kernel needs to pass the e820 reserved ranges to the second kernel. But kernel can not exactly match the e820 reserved ranges when walking through the iomem resources with the descriptor 'IORES_DESC_NONE', because several e820 types( e.g. E820_TYPE_RESERVED_KERN/E820_TYPE_RAM/E820_TYPE_UNUSABLE/E820 _TYPE_RESERVED) are converted to the descriptor 'IORES_DESC_NONE'. It may pass these four types to the kdump kernel, that is not desired result.
So, this patch adds a new I/O resource descriptor 'IORES_DESC_RESERVED' for the iomem resources search interfaces. It is helpful to exactly match the reserved resource ranges when walking through iomem resources.
In addition, since the new descriptor 'IORES_DESC_RESERVED' is introduced, these code originally related to the descriptor 'IORES_DESC_NONE' need to be updated. Otherwise, it will be easily confused and also cause some errors. Because the 'E820_TYPE_RESERVED' type is converted to the new descriptor 'IORES_DESC_RESERVED' instead of 'IORES_DESC_NONE', it has been changed.
c). add the e820 reserved ranges to kdump kernel e820 table
At present, when use the kexec_file_load syscall to load the kernel image and initramfs(for example: kexec -s -p xxx), kernel does not pass the e820 reserved ranges to the second kernel, which might cause two problems:
The first one is the MMCONFIG issue. The basic problem is that this device is in PCI segment 1 and the kernel PCI probing can not find it without all the e820 I/O reservations being present in the e820 table. And the kdump kernel does not have those reservations because the kexec command does not pass the I/O reservation via the "memmap=xxx" command line option. (This problem does not show up for other vendors, as SGI is apparently the actually fails for everyone, but devices in segment 0 are then found by some legacy lookup method.) The workaround for this is to pass the I/O reserved regions to the kdump kernel.
MMCONFIG(aka ECAM) space is described in the ACPI MCFG table. If you don't have ECAM: (a) PCI devices won't work at all on non-x86 systems that use only ECAM for config access, (b) you won't be albe to access devices on non-0 segments, (c) you won't be able to access extended config space( address 0x100-0xffff), which means none of the Extended Capabilities will be available(AER, ACS, ATS, etc). [Bjorn's comment]
The second issue is that the SME kdump kernel doesn't work without the e820 reserved ranges. When SME is active in kdump kernel, actually, those reserved regions are still decrypted, but because those reserved ranges are not present at all in kdump kernel e820 table, those reserved regions are considered as encrypted, it goes wrong.
The e820 reserved range is useful in kdump kernel, so it is necessary to pass the e820 reserved ranges to kdump kernel.
Changes since v1:
1. Modified the value of flags to "0", when walking through the whole tree for e820 reserved ranges.
Changes since v2:
1. Modified the value of flags to "0", when walking through the whole tree for e820 reserved ranges.
2. Modified the invalid SOB chain issue.
Changes since v3:
1. Dropped [PATCH 1/3 v3] resource: fix an error which walks through iomem resources. Please refer to this commit <010a93bf97c7> "resource: Fix find_next_iomem_res() iteration issue"
Changes since v4:
1. Improve the patch log, and add kernel log.
Changes since v5:
1. Rewrite these patches log.
Changes since v6:
1. Modify the [PATCH 1/2], and add the new I/O resource descriptor 'IORES_DESC_RESERVED' for the iomem resources search interfaces, and also updates these codes relates to 'IORES_DESC_NONE'.
2. Modify the [PATCH 2/2], and walk through io resource based on the new descriptor 'IORES_DESC_RESERVED'.
3. Update patch log.
Changes since v7:
1. Improve patch log.
2. Improve this function __ioremap_check_desc_other().
3. Modify code comment in the __ioremap_check_desc_other()
Changes since v8:
1. Get rid of all changes about ia64.(Borislav's suggestion)
2. Change the examination condition to the 'IORES_DESC_ACPI_*'.
3. Modify the signature. This patch(add the new I/O resource descriptor 'IORES_DESC_RESERVED') was suggested by Boris.
Lianbo Jiang (3):
x86/mm: Change the examination condition to avoid confusion
resource: add the new I/O resource descriptor 'IORES_DESC_RESERVED' x86/kexec_file: add reserved e820 ranges to kdump kernel e820 table
arch/x86/kernel/crash.c | 6 ++++++ arch/x86/kernel/e820.c | 2 +- arch/x86/mm/ioremap.c | 3 ++- include/linux/ioport.h | 1 + kernel/resource.c | 6 +++--- 5 files changed, 13 insertions(+), 5 deletions(-)
Signature · 7 lines
2.17.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
PATCH v9 1/3 x86/mm: Change the examination condition to avoid confusion
Following the commit <0e4c12b45aa8> ("x86/mm, resource: Use PAGE_KERNEL protection for ioremap of memory pages"), here it is really checking for the 'IORES_DESC_ACPI_*' values. Therefore, it is necessary to change the examination condition to avoid confusion.
--- arch/x86/mm/ioremap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/mm/ioremap.c +2 -1
@@ -83,7 +83,8 @@ static bool __ioremap_check_ram(struct resource *res)static int __ioremap_check_desc_other (struct resource *res) { -return (res->desc !=IORES_DESC_NONE ); +return ((res->desc ==IORES_DESC_ACPI_TABLES ) || + (res->desc ==IORES_DESC_ACPI_NV_STORAGE )); }static int __ioremap_res_check (struct resource *res,void *arg)
Signature · 7 lines
2.17.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Borislav Petkov
maintainerRe: [PATCH 1/3 v9] x86/mm: Change the examination condition to avoid confusion
Quoted 2 lines · Lianbo Jiang
Following the commit <
0e4c12b45aa8> ("x86/mm, resource: UsePAGE_KERNELprotection for ioremap of memory pages"),
The proper commit quotation format is done by adding this to your .gitconfig:
[core]
abbrev = 12
[alias]
one = show -s --pretty='format:%h (\"%s\")'and then doing:
$ git one <commit id>
which will give you
0e4c12b45aa8 ("x86/mm, resource: Use PAGE_KERNEL protection for ioremap of memory pages")
Quoted 1 line
here it is really checking for the 'IORES_DESC_ACPI_*' values.
Well, it is not really checking that.
Quoted 2 lines
Therefore, it is necessary to change the examination condition to avoid confusion.
What confusion?
The justification for that change sounds really fishy.
Signature · 4 lines
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.Re: [PATCH 1/3 v9] x86/mm: Change the examination condition to avoid confusion
Quoted 12 lines · Borislav Petkov
Quoted 2 lines · Lianbo Jiang
Following the commit <
0e4c12b45aa8> ("x86/mm, resource: UsePAGE_KERNELprotection for ioremap of memory pages"),The proper commit quotation format is done by adding this to your .gitconfig:
[core]
abbrev = 12 [alias] one = show -s --pretty='format:%h (\"%s\")'
Quoted 7 lines
and then doing:
$ git one <commit id>which will give you
0e4c12b45aa8("x86/mm, resource: UsePAGE_KERNELprotection for ioremap of memory pages")
Nice. I added them to my .gitconfig. It works. Thank you very much.
Quoted 4 lines
Quoted 2 lines
here it is really checking for the 'IORES_DESC_ACPI_*' values.
Well, it is not really checking that.
I mean it needs to find all the value of the 'IORES_DESC_ACPI_*' type.
Quoted 5 lines
Quoted 3 lines
Therefore, it is necessary to change the examination condition to avoid confusion.
What confusion?
As above mentioned, it needs to find all the value of the 'IORES_DESC_ACPI_*' type, so we should explicitly use the 'IORES_DESC_ACPI_*' type as the check condition instead of the 'IORES_DESC_NONE'.
Thanks.
Lianbo
Quoted 3 lines
The justification for that change sounds really fishy.
Borislav Petkov
maintainerRe: [PATCH 1/3 v9] x86/mm: Change the examination condition to avoid confusion
Quoted 1 line · lijiang
I mean it needs to find all the value of the 'IORES_DESC_ACPI_*' type.
A function called __ioremap_check_desc_other() needs to find IORES_DESC_ACPI_* types...
No, still don't know what you're trying to do.
Quoted 3 lines
As above mentioned, it needs to find all the value of the 'IORES_DESC_ACPI_*' type, so we should explicitly use the 'IORES_DESC_ACPI_*' type as the check condition instead of the '
IORES_DESC_NONE'.
And now the same question I'm asking you each time: WHY does it need to find the ACPI types?
Signature · 4 lines
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.Re: [PATCH 1/3 v9] x86/mm: Change the examination condition to avoid confusion
Quoted 7 lines · Borislav Petkov
Quoted 1 line · lijiang
I mean it needs to find all the value of the 'IORES_DESC_ACPI_*' type.
A function called
__ioremap_check_desc_other()needs to find IORES_DESC_ACPI_* types...No, still don't know what you're trying to do.
Let's look at the discussion in patch v8, please refer to this link:
https://lkml.org/lkml/2019/3/16/15
I did a test according to Tom's reply, and the test indicated his suggestion was correct, we should change this to check for IORES_DESC_ACPI_* values.
Quoted 8 lines
Quoted 4 lines
As above mentioned, it needs to find all the value of the 'IORES_DESC_ACPI_*' type, so we should explicitly use the 'IORES_DESC_ACPI_*' type as the check condition instead of the '
IORES_DESC_NONE'.And now the same question I'm asking you each time: WHY does it need to find the ACPI types?
When SEV is enabled and the page being mapped is in memory, need to ensure the memory encryption attribute is also enabled in the resulting mapping.
I believe Tom knows better than me. :-)
Thanks.
Lianbo
Borislav Petkov
maintainerRe: [PATCH 1/3 v9] x86/mm: Change the examination condition to avoid confusion
Quoted 5 lines · lijiang
Let's look at the discussion in patch v8, please refer to this link:
https://lkml.org/lkml/2019/3/16/15I did a test according to Tom's reply, and the test indicated his suggestion was correct, we should change this to check for IORES_DESC_ACPI_* values.
I know that discussion - I was on CC.
Your patch still doesn't explain *why* this change is needed and the fact that you "did a test" and it worked doesn't answer my question a single bit. In fact, it tells me that you have tried something at random without even understanding why this is needed and makes me even more suspicious towards what you're doing.
So slow down pls *think* why this change is needed and then *explain* that in the commit message.
Thx.
Signature · 9 lines
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexecPATCH v9 2/3 resource: add the new I/O resource descriptor 'IORES_DESC_RESERVED'
In reply to Lianbo JiangWhen doing kexec_file_load, the first kernel needs to pass the e820 reserved ranges to the second kernel. But kernel can not exactly match the e820 reserved ranges when walking through the iomem resources with the descriptor 'IORES_DESC_NONE', because several e820 types( e.g. E820_TYPE_RESERVED_KERN/E820_TYPE_RAM/E820_TYPE_UNUSABLE/E820 _TYPE_RESERVED) are converted to the descriptor 'IORES_DESC_NONE'. It may pass these four types to the kdump kernel, that is not desired result.
So, this patch adds a new I/O resource descriptor 'IORES_DESC_RESERVED' for the iomem resources search interfaces. It is helpful to exactly match the reserved resource ranges when walking through iomem resources.
In addition, since the new descriptor 'IORES_DESC_RESERVED' is introduced, these code originally related to the descriptor 'IORES_DESC_NONE' need to be updated. Otherwise, it will be easily confused and also cause some errors. Because the 'E820_TYPE_RESERVED' type is converted to the new descriptor 'IORES_DESC_RESERVED' instead of 'IORES_DESC_NONE', it has been changed.
--- arch/x86/kernel/e820.c | 2 +- include/linux/ioport.h | 1 + kernel/resource.c | 6 +++--- 3 files changed, 5 insertions(+), 4 deletions(-)
arch/x86/kernel/e820.c +1 -1
@@ -1050,10 +1050,10 @@ static unsigned long __init e820_type_to_iores_desc(struct e820_entry *entry)case E820_TYPE_NVS :return IORES_DESC_ACPI_NV_STORAGE ;case E820_TYPE_PMEM :return IORES_DESC_PERSISTENT_MEMORY ;case E820_TYPE_PRAM :return IORES_DESC_PERSISTENT_MEMORY_LEGACY ; +case E820_TYPE_RESERVED :return IORES_DESC_RESERVED ;case E820_TYPE_RESERVED_KERN :/* Fall-through: */ case E820_TYPE_RAM :/* Fall-through: */ case E820_TYPE_UNUSABLE :/* Fall-through: */ -case E820_TYPE_RESERVED :/* Fall-through: */ default :return IORES_DESC_NONE ; } }
include/linux/ioport.h +1 -0
@@ -133,6 +133,7 @@ enum {IORES_DESC_PERSISTENT_MEMORY_LEGACY =5 ,IORES_DESC_DEVICE_PRIVATE_MEMORY =6 ,IORES_DESC_DEVICE_PUBLIC_MEMORY =7 , + IORES_DESC_RESERVED = 8, };/* helpers to define resources */
kernel/resource.c +3 -3
@@ -990,7 +990,7 @@ __reserve_region_with_split(struct resource *root, resource_size_t start, res->start = start; res->end = end; res->flags = type |IORESOURCE_BUSY ; - res->desc =IORES_DESC_NONE ; + res->desc =IORES_DESC_RESERVED ;while (1 ) {
@@ -1025,7 +1025,7 @@ __reserve_region_with_split(struct resource *root, resource_size_t start, next_res->start = conflict->end +1 ; next_res->end = end; next_res->flags = type |IORESOURCE_BUSY ; - next_res->desc =IORES_DESC_NONE ; + next_res->desc =IORES_DESC_RESERVED ; } }else { res->start = conflict->end +1 ;
@@ -1488,7 +1488,7 @@ static int __init reserve_setup(char *str) res->start = io_start; res->end = io_start + io_num -1 ; res->flags |=IORESOURCE_BUSY ; - res->desc =IORES_DESC_NONE ; + res->desc =IORES_DESC_RESERVED ; res->child =NULL ;if (request_resource (parent, res) ==0 ) reserved = x+1 ;
Signature · 7 lines
2.17.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Borislav Petkov
maintainerRe: [PATCH 2/3 v9] resource: add the new I/O resource descriptor 'IORES_DESC_RESERVED'
Quoted 1 line · Lianbo Jiang
When doing
kexec_file_load, the first kernel needs to pass the e820
Please end function names with parentheses.
Quoted 1 line
reserved ranges to the second kernel.
... because... ?
Quoted 1 line
But kernel can not exactly match the e820 reserved ranges
^
theQuoted 5 lines
when walking through the iomem resources with the descriptor '
IORES_DESC_NONE', because several e820 types( e.g. E820_TYPE_RESERVED_KERN/E820_TYPE_RAM/E820_TYPE_UNUSABLE/E820_TYPE_RESERVED) are converted to the descriptor 'IORES_DESC_NONE'. It may pass these four types to the kdump kernel, that is not desired result.
Rewrite that sentence.
Quoted 1 line
So, this patch adds a new I/O resource descriptor '
IORES_DESC_RESERVED'
Avoid having "This patch" or "This commit" in the commit message. It is tautologically useless.
Also, do
$ git grep 'This patch' Documentation/process
for more details.
Quoted 5 lines
for the iomem resources search interfaces. It is helpful to exactly match the reserved resource ranges when walking through iomem resources.
In addition, since the new descriptor '
IORES_DESC_RESERVED' is introduced, these code originally related to the descriptor 'IORES_DESC_NONE' need to
"the code"
Quoted 3 lines
be updated.
Otherwise, it will be easily confused and also cause some errors.
What errors?
Quoted 3 lines
Because the '
E820_TYPE_RESERVED' type is converted to the new descriptor 'IORES_DESC_RESERVED' instead of 'IORES_DESC_NONE', it has been changed.
That sentence I cannot parse.
Quoted 29 lines
Suggested-by Borislav Petkov <[email protected]>Signed-off-by Lianbo Jiang <[email protected]>--- arch/x86/kernel/e820.c | 2 +- include/linux/ioport.h | 1 + kernel/resource.c | 6 +++--- 3 files changed, 5 insertions(+), 4 deletions(-)arch/x86/kernel/e820.c +1
-1@@ -1050,10 +1050,10 @@ static unsigned long __init e820_type_to_iores_desc(struct e820_entry *entry)case E820_TYPE_NVS :return IORES_DESC_ACPI_NV_STORAGE ;case E820_TYPE_PMEM :return IORES_DESC_PERSISTENT_MEMORY ;case E820_TYPE_PRAM :return IORES_DESC_PERSISTENT_MEMORY_LEGACY ; +case E820_TYPE_RESERVED :return IORES_DESC_RESERVED ;case E820_TYPE_RESERVED_KERN :/* Fall-through: */ case E820_TYPE_RAM :/* Fall-through: */ case E820_TYPE_UNUSABLE :/* Fall-through: */ -case E820_TYPE_RESERVED :/* Fall-through: */ default :return IORES_DESC_NONE ; } }include/linux/ioport.h +0
-0
include/linux/ioport.h enum { · line 139
Quoted 7 lines
include/linux/ioport.h +1
-0@@ -133,6 +133,7 @@ enum {IORES_DESC_PERSISTENT_MEMORY_LEGACY =5 ,IORES_DESC_DEVICE_PRIVATE_MEMORY =6 ,IORES_DESC_DEVICE_PUBLIC_MEMORY =7 , + IORES_DESC_RESERVED = 8, };/* helpers to define resources */
IORES_DESC_RESERVED is supposed to represent E820_TYPE_RESERVED. And if that is the case, then all three hunks below look wrong to me. If you want to pass E820_TYPE_RESERVED ranges, then do that explicitly.
Quoted 34 lines
kernel/resource.c +3
-3@@ -990,7 +990,7 @@ __reserve_region_with_split(struct resource *root, resource_size_t start, res->start = start; res->end = end; res->flags = type |IORESOURCE_BUSY ; - res->desc =IORES_DESC_NONE ; + res->desc =IORES_DESC_RESERVED ;while (1 ) {@@ -1025,7 +1025,7 @@ __reserve_region_with_split(struct resource *root, resource_size_t start, next_res->start = conflict->end +1 ; next_res->end = end; next_res->flags = type |IORESOURCE_BUSY ; - next_res->desc =IORES_DESC_NONE ; + next_res->desc =IORES_DESC_RESERVED ; } }else { res->start = conflict->end +1 ;@@ -1488,7 +1488,7 @@ static int __init reserve_setup(char *str) res->start = io_start; res->end = io_start + io_num -1 ; res->flags |=IORESOURCE_BUSY ; - res->desc =IORES_DESC_NONE ; + res->desc =IORES_DESC_RESERVED ; res->child =NULL ;if (request_resource (parent, res) ==0 ) reserved = x+1 ;Signature · 1 line
2.17.1
Signature · 4 lines
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.Re: [PATCH 2/3 v9] resource: add the new I/O resource descriptor 'IORES_DESC_RESERVED'
Quoted 44 lines · Borislav Petkov
Quoted 1 line · Lianbo Jiang
When doing
kexec_file_load, the first kernel needs to pass the e820Please end function names with parentheses.
Quoted 1 line
reserved ranges to the second kernel.
... because... ?
Quoted 1 line
But kernel can not exactly match the e820 reserved ranges
^ theQuoted 5 lines
when walking through the iomem resources with the descriptor '
IORES_DESC_NONE', because several e820 types( e.g. E820_TYPE_RESERVED_KERN/E820_TYPE_RAM/E820_TYPE_UNUSABLE/E820_TYPE_RESERVED) are converted to the descriptor 'IORES_DESC_NONE'. It may pass these four types to the kdump kernel, that is not desired result.Rewrite that sentence.
Quoted 1 line
So, this patch adds a new I/O resource descriptor '
IORES_DESC_RESERVED'Avoid having "This patch" or "This commit" in the commit message. It is tautologically useless.
Also, do
$ git grep 'This patch' Documentation/processfor more details.
Quoted 5 lines
for the iomem resources search interfaces. It is helpful to exactly match the reserved resource ranges when walking through iomem resources.
In addition, since the new descriptor '
IORES_DESC_RESERVED' is introduced, these code originally related to the descriptor 'IORES_DESC_NONE' need to"the code"
Quoted 3 lines
be updated.
Otherwise, it will be easily confused and also cause some errors.
Quoted 7 lines
What errors?
Quoted 3 lines
Because the '
E820_TYPE_RESERVED' type is converted to the new descriptor 'IORES_DESC_RESERVED' instead of 'IORES_DESC_NONE', it has been changed.That sentence I cannot parse.
Thanks for your comment. I will improve the patch log next post.
Quoted 36 lines
Quoted 36 lines
Suggested-by Borislav Petkov <[email protected]>Signed-off-by Lianbo Jiang <[email protected]>--- arch/x86/kernel/e820.c | 2 +- include/linux/ioport.h | 1 + kernel/resource.c | 6 +++--- 3 files changed, 5 insertions(+), 4 deletions(-)arch/x86/kernel/e820.c +1
-1@@ -1050,10 +1050,10 @@ static unsigned long __init e820_type_to_iores_desc(struct e820_entry *entry)case E820_TYPE_NVS :return IORES_DESC_ACPI_NV_STORAGE ;case E820_TYPE_PMEM :return IORES_DESC_PERSISTENT_MEMORY ;case E820_TYPE_PRAM :return IORES_DESC_PERSISTENT_MEMORY_LEGACY ; +case E820_TYPE_RESERVED :return IORES_DESC_RESERVED ;case E820_TYPE_RESERVED_KERN :/* Fall-through: */ case E820_TYPE_RAM :/* Fall-through: */ case E820_TYPE_UNUSABLE :/* Fall-through: */ -case E820_TYPE_RESERVED :/* Fall-through: */ default :return IORES_DESC_NONE ; } }include/linux/ioport.h +1
-0@@ -133,6 +133,7 @@ enum {IORES_DESC_PERSISTENT_MEMORY_LEGACY =5 ,IORES_DESC_DEVICE_PRIVATE_MEMORY =6 ,IORES_DESC_DEVICE_PUBLIC_MEMORY =7 , + IORES_DESC_RESERVED = 8, };
Quoted 4 lines
include/linux/ioport.h enum { · line 139
Quoted 1 line
include/linux/ioport.h +0
-0/* helpers to define resources */
IORES_DESC_RESERVEDis supposed to representE820_TYPE_RESERVED. And if> that is the case, then all three hunks below look wrong to me. If you want to passE820_TYPE_RESERVEDranges, then do that explicitly.
In this function, i printed its values, and only got the value of reserved type, so i changed the IORES_DESC_NONE to the IORES_DESC_RESERVED.
In addition, after the new descriptor 'IORES_DESC_RESERVED' is introduced, the IORES_DESC_NONE does not include the IORES_DESC_RESERVED any more, it could miss to handle the value of the reserved type.
Do you mean i should never touch the three chunks? If i made a mistake, i will remove this changes next post.
Thanks.
Lianbo
Quoted 36 lines
Quoted 35 lines
kernel/resource.c +3
-3@@ -990,7 +990,7 @@ __reserve_region_with_split(struct resource *root, resource_size_t start, res->start = start; res->end = end; res->flags = type |IORESOURCE_BUSY ; - res->desc =IORES_DESC_NONE ; + res->desc =IORES_DESC_RESERVED ;while (1 ) {@@ -1025,7 +1025,7 @@ __reserve_region_with_split(struct resource *root, resource_size_t start, next_res->start = conflict->end +1 ; next_res->end = end; next_res->flags = type |IORESOURCE_BUSY ; - next_res->desc =IORES_DESC_NONE ; + next_res->desc =IORES_DESC_RESERVED ; } }else { res->start = conflict->end +1 ;@@ -1488,7 +1488,7 @@ static int __init reserve_setup(char *str) res->start = io_start; res->end = io_start + io_num -1 ; res->flags |=IORESOURCE_BUSY ; - res->desc =IORES_DESC_NONE ; + res->desc =IORES_DESC_RESERVED ; res->child =NULL ;if (request_resource (parent, res) ==0 ) reserved = x+1 ;Signature · 1 line
2.17.1
Borislav Petkov
maintainerRe: [PATCH 2/3 v9] resource: add the new I/O resource descriptor 'IORES_DESC_RESERVED'
Quoted 6 lines · lijiang
In this function, i printed its values, and only got the value of reserved type, so i changed the
IORES_DESC_NONEto theIORES_DESC_RESERVED.In addition, after the new descriptor '
IORES_DESC_RESERVED' is introduced, theIORES_DESC_NONEdoes not include theIORES_DESC_RESERVEDany more, it could miss to handle the value of the reserved type.
Yes, IORES_DESC_RESERVED is supposed to denote the e820 reserved type. Why should IORES_DESC_NONE include it ?!?!
IORES_DESC_NONE is, well, an invalid, i.e., "none" type:
/*
* I/O Resource Descriptors
*
* Descriptors are used by walk_iomem_res_desc() and region_intersects()
* for searching a specific resource range in the iomem table. Assign
* a new descriptor when a resource range supports the search interfaces.
* Otherwise, resource.desc must be set to IORES_DESC_NONE (0). */
Quoted 2 lines
Do you mean i should never touch the three chunks? If i made a mistake, i will remove this changes next post.
I'm looking at the hunks below and you're changing ->desc assignments in some random function which doesn't look like you know what you're doing. Maybe it gets you what you want but it sure as hell doesn't look right to me.
Signature · 4 lines
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.Re: [PATCH 2/3 v9] resource: add the new I/O resource descriptor 'IORES_DESC_RESERVED'
Quoted 4 lines · Borislav Petkov
Quoted 3 lines · lijiang
In this function, i printed its values, and only got the value of reserved type, so i changed the
IORES_DESC_NONEto theIORES_DESC_RESERVED.
Quoted 8 lines
Quoted 3 lines
In addition, after the new descriptor '
IORES_DESC_RESERVED' is introduced, theIORES_DESC_NONEdoes not include theIORES_DESC_RESERVEDany more, it could miss to handle the value of the reserved type.Yes,
IORES_DESC_RESERVEDis supposed to denote the e820 reserved type. Why shouldIORES_DESC_NONEinclude it ?!?!
IORES_DESC_NONEis, well, an invalid, i.e., "none" type:
Yes, i see. That indicates an empty area, or "void" type.
Quoted 10 lines
/*
* I/O Resource Descriptors
*
* Descriptors are used bywalk_iomem_res_desc()andregion_intersects()
* for searching a specific resource range in the iomem table. Assign
* a new descriptor when a resource range supports the search interfaces.
* Otherwise, resource.desc must be set toIORES_DESC_NONE(0). */
Quoted 8 lines
Quoted 2 lines
Do you mean i should never touch the three chunks? If i made a mistake, i will remove this changes next post.
I'm looking at the hunks below and you're changing ->desc assignments in some random function which doesn't look like you know what you're doing. Maybe it gets you what you want but it sure as hell doesn't look right to me.
I have realized that there could be a problem with this changes. Indeed, here it denotes an empty area instead of a reserved area.
BTW: Looks like the name of this function(__reserve_region_with_split) is a bit misleading.
Thank you for pointing out this problem, i will correct them next post.
Lianbo
PATCH v9 3/3 x86/kexec_file: add reserved e820 ranges to kdump kernel e820 table
In reply to Lianbo JiangAt present, when use the kexec_file_load syscall to load the kernel image and initramfs(for example: kexec -s -p xxx), kernel does not pass the e820 reserved ranges to the second kernel, which might cause two problems:
The first one is the MMCONFIG issue. The basic problem is that this device is in PCI segment 1 and the kernel PCI probing can not find it without all the e820 I/O reservations being present in the e820 table. And the kdump kernel does not have those reservations because the kexec command does not pass the I/O reservation via the "memmap=xxx" command line option. (This problem does not show up for other vendors, as SGI is apparently the actually fails for everyone, but devices in segment 0 are then found by some legacy lookup method.) The workaround for this is to pass the I/O reserved regions to the kdump kernel.
MMCONFIG(aka ECAM) space is described in the ACPI MCFG table. If you don't have ECAM: (a) PCI devices won't work at all on non-x86 systems that use only ECAM for config access, (b) you won't be albe to access devices on non-0 segments, (c) you won't be able to access extended config space( address 0x100-0xffff), which means none of the Extended Capabilities will be available(AER, ACS, ATS, etc). [Bjorn's comment]
The second issue is that the SME kdump kernel doesn't work without the e820 reserved ranges. When SME is active in kdump kernel, actually, those reserved regions are still decrypted, but because those reserved ranges are not present at all in kdump kernel e820 table, those reserved regions are considered as encrypted, it goes wrong.
The e820 reserved range is useful in kdump kernel, so it is necessary to pass the e820 reserved ranges to kdump kernel.
--- arch/x86/kernel/crash.c | 6 ++++++ 1 file changed, 6 insertions(+)
arch/x86/kernel/crash.c +6 -0
@@ -381,6 +381,12 @@ int crash_setup_memmap_entries(struct kimage *image, struct boot_params *params)walk_iomem_res_desc (IORES_DESC_ACPI_NV_STORAGE , flags,0 ,-1 , &cmd, memmap_entry_callback); +/* Add e820 reserved ranges */ + cmd.type =E820_TYPE_RESERVED ; + flags =IORESOURCE_MEM ; +walk_iomem_res_desc (IORES_DESC_RESERVED , flags,0 ,-1 , &cmd, + memmap_entry_callback); +/* Add crashk_low_res region */ if (crashk_low_res.end) { ei.addr = crashk_low_res.start;
Signature · 7 lines
2.17.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec