Always allow sleepable and fmod_ret programs on syscalls
Subsystems (4)
v3 cover Always allow sleepable and fmod_ret programs on syscalls
Both sleepable and fmod_ret programs are only allowed on selected functions. For convenience, the error injection list was originally used.
When error injection is disabled, that list is empty and sleepable tracing programs, as well as fmod_ret programs, are effectively unavailable.
This patch series addresses the issue by at least enabling sleepable and fmod_ret programs on syscalls, if error injection is disabled. More details on why syscalls are used can be found in [1].
[1] https://lore.kernel.org/bpf/CAADnVQK6qP8izg+k9yV0vdcT-+=axtFQ2fKw7D-2Ei-V6WS5Dw@mail.gmail.com/
Changes in v3:
- Handle LoongArch (Leon)
- Add Kumar's and Leon's acks
Changes in v2:
- Check "sys_" prefix instead of "sys" for powerpc syscalls (AI review)
- Add link to the original discussion (Kumar)
- Add explanation why arch syscall prefixes are hard-coded (Leon)
Viktor Malik (3):
bpf: Always allow sleepable programs on syscalls
bpf: Always allow fmod_ret programs on syscalls selftests/bpf: Move sleepable refcounted_kptr tests to syscalls
kernel/bpf/verifier.c | 85 ++++++++++++++++--- .../selftests/bpf/progs/refcounted_kptr.c | 4 +- .../bpf/progs/refcounted_kptr_fail.c | 2 +- 3 files changed, 74 insertions(+), 17 deletions(-)
Signature · 1 line
2.53.0
PATCH v3 1/3 bpf: Always allow sleepable programs on syscalls
Sleepable BPF programs can only be attached to selected functions. For convenience, the error injection list was originally used, which contains syscalls and several other functions.
When error injection is disabled (CONFIG_FUNCTION_ERROR_INJECTION=n), that list is empty and sleepable tracing programs are effectively unavailable. In such a case, at least enable sleepable programs on syscalls. For discussion why syscalls were chosen, see [1].
To detect that a function is a syscall handler, we check for arch-specific prefixes for the most common architectures. Unfortunately, the prefixes are hard-coded in arch syscall code so we need to hard-code them, too.
[1] https://lore.kernel.org/bpf/CAADnVQK6qP8izg+k9yV0vdcT-+=axtFQ2fKw7D-2Ei-V6WS5Dw@mail.gmail.com/
--- kernel/bpf/verifier.c | 60 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 54 insertions(+), 6 deletions(-)
kernel/bpf/verifier.c +54 -6
@@ -24961,6 +24961,8 @@ static int check_attach_modify_return(unsigned long addr, const char *func_name)return -EINVAL ; } +#ifdef CONFIG_FUNCTION_ERROR_INJECTION +/* list of non-sleepable functions that are otherwise on * ALLOW_ERROR_INJECTION list */
@@ -24982,6 +24984,57 @@ static int check_non_sleepable_error_inject(u32 btf_id)return btf_id_set_contains (&btf_non_sleepable_error_inject, btf_id); } +static int check_attach_sleepable (u32 btf_id,unsigned long addr,const char *func_name) +{ +/* fentry/fexit/fmod_ret progs can be sleepable if they are +* attached to ALLOW_ERROR_INJECTION and are not in denylist. +*/ +if (!check_non_sleepable_error_inject (btf_id) && +within_error_injection_list (addr)) +return 0 ; + +return -EINVAL ; +} + +#else + +/* Unfortunately, the arch-specific prefixes are hard-coded in arch syscall code +* so we need to hard-code them, too. Ftrace has arch_syscall_match_sym_name() +* but that just compares two concrete function names. +*/ +static bool has_arch_syscall_prefix (const char *func_name) +{ +#if defined(__x86_64__) +return !strncmp (func_name,"__x64_" ,6 ); +#elif defined(__i386__) +return !strncmp (func_name,"__ia32_" ,7 ); +#elif defined(__s390x__) +return !strncmp (func_name,"__s390x_" ,8 ); +#elif defined(__aarch64__) +return !strncmp (func_name,"__arm64_" ,8 ); +#elif defined(__riscv) +return !strncmp (func_name,"__riscv_" ,8 ); +#elif defined(__powerpc__) || defined(__powerpc64__) +return !strncmp (func_name,"sys_" ,4 ); +#elif defined(__loongarch__) +return !strncmp (func_name,"sys_" ,4 ); +#else +return false; +#endif +} + +/* Without error injection, allow sleepable progs on syscalls. */ + +static int check_attach_sleepable (u32 btf_id,unsigned long addr,const char *func_name) +{ +if (has_arch_syscall_prefix (func_name)) +return 0 ; + +return -EINVAL ; +} + +#endif /* CONFIG_FUNCTION_ERROR_INJECTION */ + int bpf_check_attach_target(struct bpf_verifier_log *log, const struct bpf_prog *prog, const struct bpf_prog *tgt_prog,
@@ -25261,12 +25314,7 @@ int bpf_check_attach_target(struct bpf_verifier_log *log, ret = -EINVAL ;switch (prog->type) {case BPF_PROG_TYPE_TRACING : - -/* fentry/fexit/fmod_ret progs can be sleepable if they are -* attached to ALLOW_ERROR_INJECTION and are not in denylist. -*/ -if (!check_non_sleepable_error_inject (btf_id) && -within_error_injection_list (addr)) +if (!check_attach_sleepable (btf_id, addr, tname)) ret =0 ;/* fentry/fexit/fmod_ret progs can also be sleepable if they are * in the fmodret id set with the KF_SLEEPABLE flag.
Signature · 1 line
2.53.0
PATCH v3 2/3 bpf: Always allow fmod_ret programs on syscalls
In reply to Viktor Malikfmod_ret BPF programs can only be attached to selected functions. For convenience, the error injection list was originally used (along with functions prefixed with "security_"), which contains syscalls and several other functions.
When error injection is disabled (CONFIG_FUNCTION_ERROR_INJECTION=n), that list is empty and fmod_ret programs are effectively unavailable for most of the functions. In such a case, at least enable fmod_ret programs on syscalls.
--- kernel/bpf/verifier.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-)
kernel/bpf/verifier.c +19 -10
@@ -24952,15 +24952,6 @@ static int check_struct_ops_btf_id(struct bpf_verifier_env *env) }#define SECURITY_PREFIX "security_" -static int check_attach_modify_return (unsigned long addr,const char *func_name) -{ -if (within_error_injection_list (addr) || - !strncmp (SECURITY_PREFIX , func_name,sizeof (SECURITY_PREFIX ) -1 )) -return 0 ; - -return -EINVAL ; -} -#ifdef CONFIG_FUNCTION_ERROR_INJECTION /* list of non-sleepable functions that are otherwise on
@@ -24996,6 +24987,15 @@ static int check_attach_sleepable(u32 btf_id, unsigned long addr, const char *fu return -EINVAL; } +static int check_attach_modify_return (unsigned long addr,const char *func_name) +{ +if (within_error_injection_list (addr) || + !strncmp (SECURITY_PREFIX , func_name,sizeof (SECURITY_PREFIX ) -1 )) +return 0 ; + +return -EINVAL ; +} +#else /* Unfortunately, the arch-specific prefixes are hard-coded in arch syscall code
@@ -25023,7 +25023,7 @@ static bool has_arch_syscall_prefix(const char *func_name)#endif } -/* Without error injection, allow sleepable progs on syscalls. */ +/* Without error injection, allow sleepable and fmod_ret progs on syscalls. */ static int check_attach_sleepable (u32 btf_id,unsigned long addr,const char *func_name) {
@@ -25033,6 +25033,15 @@ static int check_attach_sleepable(u32 btf_id, unsigned long addr, const char *fureturn -EINVAL ; } +static int check_attach_modify_return (unsigned long addr,const char *func_name) +{ +if (has_arch_syscall_prefix (func_name) || + !strncmp (SECURITY_PREFIX , func_name,sizeof (SECURITY_PREFIX ) -1 )) +return 0 ; + +return -EINVAL ; +} +#endif /* CONFIG_FUNCTION_ERROR_INJECTION */ int bpf_check_attach_target(struct bpf_verifier_log *log,
Signature · 1 line
2.53.0
PATCH v3 3/3 selftests/bpf: Move sleepable refcounted_kptr tests to syscalls
In reply to Viktor MalikNow that sleepable programs are always enabled on syscalls, let refcounted_kptr tests use syscalls rather than bpf_testmod_test_read, which is not sleepable with error injection disabled.
The tests just check that the verifier can handle usage of RCU locks in sleepable programs and never actually attach. So, the attachment target doesn't matter (as long as it is sleepable) and with syscalls, the tests pass on kernels with disabled error injection.
--- tools/testing/selftests/bpf/progs/refcounted_kptr.c | 4 ++-- tools/testing/selftests/bpf/progs/refcounted_kptr_fail.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/progs/refcounted_kptr.c +2 -2
@@ -500,7 +500,7 @@ long rbtree_wrong_owner_remove_fail_a2(void *ctx)return 0 ; } -SEC("?fentry.s/bpf_testmod_test_read") +SEC("?fentry.s/" SYS_PREFIX "sys_getpgid") __success int BPF_PROG(rbtree_sleepable_rcu, struct file *file, struct kobject *kobj,
@@ -534,7 +534,7 @@ int BPF_PROG(rbtree_sleepable_rcu,return 0 ; } -SEC("?fentry.s/bpf_testmod_test_read") +SEC("?fentry.s/" SYS_PREFIX "sys_getpgid") __success int BPF_PROG(rbtree_sleepable_rcu_no_explicit_rcu_lock, struct file *file, struct kobject *kobj,
tools/testing/selftests/bpf/progs/refcounted_kptr_fail.c +1 -1
@@ -93,7 +93,7 @@ long rbtree_refcounted_node_ref_escapes_owning_input(void *ctx)return 0 ; } -SEC("?fentry.s/bpf_testmod_test_read") +SEC("?fentry.s/" SYS_PREFIX "sys_getpgid") __failure __msg("function calls are not allowed while holding a lock") int BPF_PROG(rbtree_fail_sleepable_lock_across_rcu, struct file *file, struct kobject *kobj,
Signature · 1 line
2.53.0
Quoted 12 lines · Viktor Malik
Both sleepable and
fmod_retprograms are only allowed on selected functions. For convenience, the error injection list was originally used.When error injection is disabled, that list is empty and sleepable tracing programs, as well as
fmod_retprograms, are effectively unavailable.This patch series addresses the issue by at least enabling sleepable and
fmod_retprograms on syscalls, if error injection is disabled. More details on why syscalls are used can be found in [1].
Quoted 5 lines
[1] https://lore.kernel.org/bpf/CAADnVQK6qP8izg+k9yV0vdcT-+=axtFQ2fKw7D-2Ei-V6WS5Dw@mail.gmail.com/
Changes in v3:
- Handle LoongArch (Leon)
- Add Kumar's and Leon's acks
jirka
Quoted 19 lines
Changes in v2:
- Check "sys_" prefix instead of "sys" for powerpc syscalls (AI review)
- Add link to the original discussion (Kumar)
- Add explanation why arch syscall prefixes are hard-coded (Leon)Viktor Malik (3):
bpf: Always allow sleepable programs on syscalls
bpf: Always allowfmod_retprograms on syscalls selftests/bpf: Move sleepablerefcounted_kptrtests to syscallskernel/bpf/verifier.c | 85 ++++++++++++++++--- .../selftests/bpf/progs/refcounted_kptr.c | 4 +- .../bpf/progs/refcounted_kptr_fail.c | 2 +- 3 files changed, 74 insertions(+), 17 deletions(-)Signature · 1 line
2.53.0
This series was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:
Hello:
This series was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:
Quoted 9 lines · On Mon, 9 Mar 2026 12:23:55 +0100 you wrote:
Both sleepable and
fmod_retprograms are only allowed on selected functions. For convenience, the error injection list was originally used.When error injection is disabled, that list is empty and sleepable tracing programs, as well as
fmod_retprograms, are effectively unavailable.[...]
Here is the summary with links:
- [bpf-next,v3,1/3] bpf: Always allow sleepable programs on syscalls
https://git.kernel.org/bpf/bpf-next/c/16d9c5660692 - [bpf-next,v3,2/3] bpf: Always allow fmod_ret programs on syscalls https://git.kernel.org/bpf/bpf-next/c/20c2e102a2f3 - [bpf-next,v3,3/3] selftests/bpf: Move sleepable refcounted_kptr tests to syscalls https://git.kernel.org/bpf/bpf-next/c/fcec7c66d681
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html