clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
Subsystems (12)
Sasha Levin
maintainerPATCH 1/22 clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
From: Gabor Juhos <[email protected]>
[ Upstream commit 2ba8425678af422da37b6c9b50e9ce66f0f55cae ]
Since the CONFIG_CTL register is only 32 bits wide in the Stromer and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the IPQ5018 and IPQ5332 configurations are not used so remove those.
No functional changes.
--- drivers/clk/qcom/apss-ipq-pll.c | 2 -- 1 file changed, 2 deletions(-)
drivers/clk/qcom/apss-ipq-pll.c +0 -2
@@ -100,7 +100,6 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = {static const struct alpha_pll_config ipq5018_pll_config = { .l =0x2a , .config_ctl_val =0x4001075b , - .config_ctl_hi_val =0x304 , .main_output_mask =BIT (0 ), .aux_output_mask =BIT (1 ), .early_output_mask =BIT (3 ),
@@ -114,7 +113,6 @@ static const struct alpha_pll_config ipq5018_pll_config = {static const struct alpha_pll_config ipq5332_pll_config = { .l =0x2d , .config_ctl_val =0x4001075b , - .config_ctl_hi_val =0x304 , .main_output_mask =BIT (0 ), .aux_output_mask =BIT (1 ), .early_output_mask =BIT (3 ),
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 2/22 net: mac802154: Fix racy device stats updates by DEV_STATS_INC() and DEV_STATS_ADD()
From: Yunshui Jiang <[email protected]>
[ Upstream commit b8ec0dc3845f6c9089573cb5c2c4b05f7fc10728 ]
mac802154 devices update their dev->stats fields locklessly. Therefore these counters should be updated atomically. Adopt SMP safe DEV_STATS_INC() and DEV_STATS_ADD() to achieve this.
Message-ID: <[email protected]>
--- net/mac802154/tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
net/mac802154/tx.c +4 -4
@@ -34,8 +34,8 @@ void ieee802154_xmit_sync_worker(struct work_struct *work)if (res) goto err_tx; - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; +DEV_STATS_INC (dev, tx_packets); +DEV_STATS_ADD (dev, tx_bytes, skb->len);ieee802154_xmit_complete (&local->hw, skb, false);
@@ -90,8 +90,8 @@ ieee802154_tx(struct ieee802154_local *local, struct sk_buff *skb)if (ret) goto err_wake_netif_queue; - dev->stats.tx_packets++; - dev->stats.tx_bytes += len; +DEV_STATS_INC (dev, tx_packets); +DEV_STATS_ADD (dev, tx_bytes, len); }else { local->tx_skb = skb;queue_work (local->workqueue, &local->sync_tx_work);
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 3/22 powerpc/pseries: Whitelist dtl slub object for copying to userspace
In reply to Sasha LevinFrom: Anjali K <[email protected]>
[ Upstream commit 1a14150e1656f7a332a943154fc486504db4d586 ]
Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below.
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc
scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85
Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries
NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8
REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e
CFAR: c0000000001fdc80 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0
LR [c0000000005d23d0] usercopy_abort+0x74/0xb0
Call Trace:
usercopy_abort+0x74/0xb0 (unreliable)
__check_heap_object+0xf8/0x120
check_heap_object+0x218/0x240
__check_object_size+0x84/0x1a4
dtl_file_read+0x17c/0x2c4
full_proxy_read+0x8c/0x110
vfs_read+0xdc/0x3a0
ksys_read+0x84/0x144
system_call_exception+0x124/0x330
system_call_vectored_common+0x15c/0x2ec
--- interrupt: 3000 at 0x7fff81f3ab34Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access.
Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object.
--- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/platforms/pseries/setup.c +2 -2
@@ -343,8 +343,8 @@ static int alloc_dispatch_log_kmem_cache(void) {void (*ctor)(void *) =get_dtl_cache_ctor (); - dtl_cache =kmem_cache_create ("dtl" ,DISPATCH_LOG_BYTES , -DISPATCH_LOG_BYTES ,0 , ctor); + dtl_cache =kmem_cache_create_usercopy ("dtl" ,DISPATCH_LOG_BYTES , +DISPATCH_LOG_BYTES ,0 ,0 ,DISPATCH_LOG_BYTES , ctor);if (!dtl_cache) {pr_warn ("Failed to create dispatch trace log buffer cache\n" );pr_warn ("Stolen time statistics will be unreliable\n" );
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 4/22 powerpc/eeh: avoid possible crash when edev->pdev changes
In reply to Sasha LevinFrom: Ganesh Goudar <[email protected]>
[ Upstream commit a1216e62d039bf63a539bbe718536ec789a853dd ]
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus.
--- arch/powerpc/kernel/eeh_pe.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
arch/powerpc/kernel/eeh_pe.c +5 -2
@@ -849,6 +849,7 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe) {struct eeh_dev *edev;struct pci_dev *pdev; +struct pci_bus *bus =NULL ;if (pe->type &EEH_PE_PHB )return pe->phb->bus;
@@ -859,9 +860,11 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)/* Retrieve the parent PCI bus of first (top) PCI device */ edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, entry); +pci_lock_rescan_remove (); pdev =eeh_dev_to_pci_dev (edev);if (pdev) -return pdev->bus; + bus = pdev->bus; +pci_unlock_rescan_remove (); -return NULL ; +return bus; }
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 5/22 scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed
In reply to Sasha LevinFrom: Xingui Yang <[email protected]>
[ Upstream commit ab2068a6fb84751836a84c26ca72b3beb349619d ]
The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows:
[78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it.
--- drivers/scsi/libsas/sas_internal.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/scsi/libsas/sas_internal.h +14 -0
@@ -145,6 +145,20 @@ static inline void sas_fail_probe(struct domain_device *dev, const char *func, i func, dev->parent ?"exp-attached" :"direct-attached" , SAS_ADDR(dev->sas_addr), err); + +/* +* If the device probe failed, the expander phy attached address +* needs to be reset so that the phy will not be treated as flutter +* in the next revalidation +*/ +if (dev->parent && !dev_is_expander (dev->dev_type)) { +struct sas_phy *phy = dev->phy; +struct domain_device *parent = dev->parent; +struct ex_phy *ex_phy = &parent->ex_dev.ex_phy[phy->number]; + +memset (ex_phy->attached_sas_addr,0 ,SAS_ADDR_SIZE ); + } +sas_unregister_dev (dev->port, dev); }
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 6/22 tee: optee: ffa: Fix missing-field-initializers warning
In reply to Sasha LevinFrom: Mark-PK Tsai <[email protected]>
[ Upstream commit e0556255a53d6d3d406a28362dffd972018a997c ]
The 'missing-field-initializers' warning was reported when building with W=2.
This patch use designated initializers for 'struct ffa_send_direct_data' to suppress the warning and clarify the initialization intent.
--- drivers/tee/optee/ffa_abi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/tee/optee/ffa_abi.c +9 -3
@@ -660,7 +660,9 @@ static bool optee_ffa_api_is_compatbile(struct ffa_device *ffa_dev, const struct ffa_ops *ops) {const struct ffa_msg_ops *msg_ops = ops->msg_ops; -struct ffa_send_direct_data data = {OPTEE_FFA_GET_API_VERSION }; +struct ffa_send_direct_data data = { + .data0 =OPTEE_FFA_GET_API_VERSION , + };int rc; msg_ops->mode_32bit_set (ffa_dev);
@@ -677,7 +679,9 @@ static bool optee_ffa_api_is_compatbile(struct ffa_device *ffa_dev,return false; } - data = (struct ffa_send_direct_data ){OPTEE_FFA_GET_OS_VERSION }; + data = (struct ffa_send_direct_data ){ + .data0 =OPTEE_FFA_GET_OS_VERSION , + }; rc = msg_ops->sync_send_receive (ffa_dev, &data);if (rc) {pr_err ("Unexpected error %d\n" , rc);
@@ -698,7 +702,9 @@ static bool optee_ffa_exchange_caps(struct ffa_device *ffa_dev,unsigned int *rpc_param_count, unsigned int *max_notif_value) { - struct ffa_send_direct_data data = { OPTEE_FFA_EXCHANGE_CAPABILITIES }; + struct ffa_send_direct_data data = { + .data0 =OPTEE_FFA_EXCHANGE_CAPABILITIES , + };int rc; rc = ops->msg_ops->sync_send_receive (ffa_dev, &data);
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 7/22 Bluetooth: hci_core: cancel all works upon hci_unregister_dev()
In reply to Sasha LevinFrom: Tetsuo Handa <[email protected]>
[ Upstream commit 0d151a103775dd9645c78c97f77d6e2a5298d913 ]
syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush.
We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment
destroy_workqueue(hdev->workqueue);
destroy_workqueue(hdev->req_workqueue);are called from hci_release_dev().
Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list.
--- net/bluetooth/hci_core.c | 4 ++++ 1 file changed, 4 insertions(+)
net/bluetooth/hci_core.c +4 -0
@@ -2744,7 +2744,11 @@ void hci_unregister_dev(struct hci_dev *hdev)list_del (&hdev->list);write_unlock (&hci_dev_list_lock); +cancel_work_sync (&hdev->rx_work); +cancel_work_sync (&hdev->cmd_work); +cancel_work_sync (&hdev->tx_work);cancel_work_sync (&hdev->power_on); +cancel_work_sync (&hdev->error_reset);hci_cmd_sync_clear (hdev);
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 8/22 Bluetooth: btnxpuart: Enable Power Save feature on startup
In reply to Sasha LevinFrom: Neeraj Sanjay Kale <[email protected]>
[ Upstream commit 4183a7be77009fc31c5760429fe095f163bf96a9 ]
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test")
With this setting, the driver will send the vendor command to FW at startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
--- drivers/bluetooth/btnxpuart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/btnxpuart.c +1 -1
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];/* Default configurations */ #define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK -#define DEFAULT_PS_MODE PS_MODE_DISABLE +#define DEFAULT_PS_MODE PS_MODE_ENABLE#define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 9/22 bluetooth/l2cap: sync sock recv cb and release
In reply to Sasha LevinFrom: Edward Adam Davis <[email protected]>
[ Upstream commit 89e856e124f9ae548572c56b1b70c2255705f8fe ]
The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
--- net/bluetooth/l2cap_sock.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)
net/bluetooth/l2cap_sock.c +22 -3
@@ -1239,6 +1239,10 @@ static void l2cap_sock_kill(struct sock *sk)BT_DBG ("sk %p state %s" , sk,state_to_string (sk->sk_state)); +/* Sock is dead, so set chan data to NULL, avoid other task use invalid +* sock pointer. +*/ +l2cap_pi (sk)->chan->data =NULL ;/* Kill poor orphan */ l2cap_chan_put (l2cap_pi (sk)->chan);
@@ -1481,12 +1485,25 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(struct l2cap_chan *chan)static int l2cap_sock_recv_cb (struct l2cap_chan *chan,struct sk_buff *skb) { -struct sock *sk = chan->data; -struct l2cap_pinfo *pi =l2cap_pi (sk); +struct sock *sk; +struct l2cap_pinfo *pi;int err; -lock_sock (sk); +/* To avoid race with sock_release, a chan lock needs to be added here +* to synchronize the sock. +*/ +l2cap_chan_hold (chan); +l2cap_chan_lock (chan); + sk = chan->data; +if (!sk) { +l2cap_chan_unlock (chan); +l2cap_chan_put (chan); +return -ENXIO ; + } + + pi =l2cap_pi (sk); +lock_sock (sk);if (chan->mode ==L2CAP_MODE_ERTM && !list_empty (&pi->rx_busy)) { err = -ENOMEM ; goto done;
@@ -1535,6 +1552,8 @@ static int l2cap_sock_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb) done:release_sock (sk); +l2cap_chan_unlock (chan); +l2cap_chan_put (chan);return err; }
Signature · 1 line
2.43.0
Re: [PATCH AUTOSEL 6.9 09/22] bluetooth/l2cap: sync sock recv cb and release
Hi,
ti, 2024-07-16 kello 10:24 -0400, Sasha Levin kirjoitti:
Quoted 3 lines
From: Edward Adam Davis <[email protected]>
[ Upstream commit
89e856e124f9ae548572c56b1b70c2255705f8fe]
This one needed an additional fixup that I don't see AUTOSEL picked up, otherwise it results to a worse regression:
https://lore.kernel.org/linux-bluetooth/[email protected]/
Looks like f1a8f402f13f94263cf349216c257b2985100927 also contains other changes not related to this patch, seems like
https://lore.kernel.org/linux-bluetooth/[email protected]/
was squashed.
Quoted 81 lines
The problem occurs between the system call to close the sock and
hci_rx_work, where the former releases the sock and the latter accesses it without lock protection.CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel
l2cap_sock_recv_cbIf
hci_rx_workprocesses the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data.Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
Reported-and-tested-by [email protected]Signed-off-by Edward Adam Davis <[email protected]>Signed-off-by Luiz Augusto von Dentz <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- net/bluetooth/l2cap_sock.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)net/bluetooth/l2cap_sock.c +22
-3@@ -1239,6 +1239,10 @@ static void l2cap_sock_kill(struct sock *sk)BT_DBG ("sk %p state %s" , sk,state_to_string (sk->sk_state)); +/* Sock is dead, so set chan data to NULL, avoid other task use invalid +* sock pointer. +*/ +l2cap_pi (sk)->chan->data =NULL ;/* Kill poor orphan */ l2cap_chan_put (l2cap_pi (sk)->chan);@@ -1481,12 +1485,25 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(struct l2cap_chan *chan)static int l2cap_sock_recv_cb (struct l2cap_chan *chan,struct sk_buff *skb) { -struct sock *sk = chan->data; -struct l2cap_pinfo *pi =l2cap_pi (sk); +struct sock *sk; +struct l2cap_pinfo *pi;int err; -lock_sock (sk); +/* To avoid race with sock_release, a chan lock needs to be added here +* to synchronize the sock. +*/ +l2cap_chan_hold (chan); +l2cap_chan_lock (chan); + sk = chan->data; +if (!sk) { +l2cap_chan_unlock (chan); +l2cap_chan_put (chan); +return -ENXIO ; + } + + pi =l2cap_pi (sk); +lock_sock (sk);if (chan->mode ==L2CAP_MODE_ERTM && !list_empty (&pi->rx_busy)) { err = -ENOMEM ; goto done;@@ -1535,6 +1552,8 @@ static int l2cap_sock_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb) done:release_sock (sk); +l2cap_chan_unlock (chan); +l2cap_chan_put (chan);return err; }
Signature · 1 line
Pauli Virtanen
Luiz Augusto von Dentz
maintainerRe: [PATCH AUTOSEL 6.9 09/22] bluetooth/l2cap: sync sock recv cb and release
Hi Pauli,
Quoted 13 lines · Pauli Virtanen
Hi,
ti, 2024-07-16 kello 10:24 -0400, Sasha Levin kirjoitti:
Quoted 3 lines
From: Edward Adam Davis <[email protected]>
[ Upstream commit
89e856e124f9ae548572c56b1b70c2255705f8fe]This one needed an additional fixup that I don't see AUTOSEL picked up, otherwise it results to a worse regression:
Quoted 7 lines
Looks like
f1a8f402f13f94263cf349216c257b2985100927also contains other changes not related to this patch, seems like
https://lore.kernel.org/linux-bluetooth/[email protected]/
was squashed.
Yep, it seems I messed them up while doing the pull-request and 2 commits were merged together, not sure if we can rebase them now that are in Linus tree, anyway for stable it would be better to unmerge them if possible.
Quoted 84 lines
Quoted 73 lines
The problem occurs between the system call to close the sock and
hci_rx_work, where the former releases the sock and the latter accesses it without lock protection.CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel
l2cap_sock_recv_cbIf
hci_rx_workprocesses the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data.Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
Reported-and-tested-by [email protected]Signed-off-by Edward Adam Davis <[email protected]>Signed-off-by Luiz Augusto von Dentz <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- net/bluetooth/l2cap_sock.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)net/bluetooth/l2cap_sock.c +20
-3@@ -1239,6 +1239,10 @@ static void l2cap_sock_kill(struct sock *sk)BT_DBG ("sk %p state %s" , sk,state_to_string (sk->sk_state)); +/* Sock is dead, so set chan data to NULL, avoid other task use invalid +* sock pointer. +*/ +l2cap_pi (sk)->chan->data =NULL ;/* Kill poor orphan */ l2cap_chan_put (l2cap_pi (sk)->chan);@@ -1481,12 +1485,25 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(struct l2cap_chan *chan)static int l2cap_sock_recv_cb (struct l2cap_chan *chan,struct sk_buff *skb) { -struct sock *sk = chan->data; -struct l2cap_pinfo *pi =l2cap_pi (sk); +struct sock *sk; +struct l2cap_pinfo *pi;int err; -lock_sock (sk); +/* To avoid race with sock_release, a chan lock needs to be added here +* to synchronize the sock. +*/ +l2cap_chan_hold (chan); +l2cap_chan_lock (chan); + sk = chan->data; +if (!sk) { +l2cap_chan_unlock (chan); +l2cap_chan_put (chan); +return -ENXIO ; + } + + pi =l2cap_pi (sk); +lock_sock (sk);if (chan->mode ==L2CAP_MODE_ERTM && !list_empty (&pi->rx_busy)) { err = -ENOMEM ; goto done;net/bluetooth/l2cap_sock.c static int l2cap_sock_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb) · line 1559
Quoted 8 lines
net/bluetooth/l2cap_sock.c +2
-0@@ -1535,6 +1552,8 @@ static int l2cap_sock_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb) done:release_sock (sk); +l2cap_chan_unlock (chan); +l2cap_chan_put (chan);return err; }--
Pauli Virtanen
Signature · 1 line
Luiz Augusto von Dentz
Sasha Levin
maintainerRe: [PATCH AUTOSEL 6.9 09/22] bluetooth/l2cap: sync sock recv cb and release
Quoted 24 lines · Luiz Augusto von Dentz
Hi Pauli,
Quoted 13 lines · Pauli Virtanen
Hi,
ti, 2024-07-16 kello 10:24 -0400, Sasha Levin kirjoitti:
Quoted 3 lines
From: Edward Adam Davis <[email protected]>
[ Upstream commit
89e856e124f9ae548572c56b1b70c2255705f8fe]This one needed an additional fixup that I don't see AUTOSEL picked up, otherwise it results to a worse regression:
Quoted 7 lines
Looks like
f1a8f402f13f94263cf349216c257b2985100927also contains other changes not related to this patch, seems like
https://lore.kernel.org/linux-bluetooth/[email protected]/
was squashed.
Quoted 4 lines
Yep, it seems I messed them up while doing the pull-request and 2 commits were merged together, not sure if we can rebase them now that are in Linus tree, anyway for stable it would be better to unmerge them if possible.
We really want to keep patches the same as they are in Linus's tree - it doesn't make sense to edit them just for stable.
Signature · 2 lines
Thanks, Sasha
Sasha Levin
maintainerPATCH 10/22 erofs: ensure m_llen is reset to 0 if metadata is invalid
In reply to Sasha LevinFrom: Gao Xiang <[email protected]>
[ Upstream commit 9b32b063be1001e322c5f6e01f2a649636947851 ]
Sometimes, the on-disk metadata might be invalid due to user interrupts, storage failures, or other unknown causes.
In that case, z_erofs_map_blocks_iter() may still return a valid m_llen while other fields remain invalid (e.g., m_plen can be 0).
Due to the return value of z_erofs_scan_folio() in some path will be ignored on purpose, the following z_erofs_scan_folio() could then use the invalid value by accident.
Let's reset m_llen to 0 to prevent this.
--- fs/erofs/zmap.c | 2 ++ 1 file changed, 2 insertions(+)
fs/erofs/zmap.c +2 -0
@@ -723,6 +723,8 @@ int z_erofs_map_blocks_iter(struct inode *inode, struct erofs_map_blocks *map, err =z_erofs_do_map_blocks (inode, map, flags); out: +if (err) + map->m_llen =0 ;trace_z_erofs_map_blocks_iter_exit (inode, map, flags, err);return err; }
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 11/22 drm/amd/display: Reset freesync config before update new state
In reply to Sasha LevinFrom: Tom Chung <[email protected]>
[ Upstream commit 6b8487cdf9fc7bae707519ac5b5daeca18d1e85b ]
[Why]
Sometimes the new_crtc_state->vrr_infopacket did not sync up with the current state.
It will affect the update_freesync_state_on_stream() does not update the state correctly.
[How]
Reset the freesync config before get_freesync_config_for_crtc() to make sure we have the correct new_crtc_state for VRR.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -0
@@ -10028,6 +10028,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, }/* Update Freesync settings. */ +reset_freesync_config_for_crtc (dm_new_crtc_state);get_freesync_config_for_crtc (dm_new_crtc_state, dm_new_conn_state);
Signature · 1 line
2.43.0
Re: [PATCH AUTOSEL 6.9 11/22] drm/amd/display: Reset freesync config before update new state
Hi Sasha,
Quoted 10 lines · Sasha Levin
From: Tom Chung <[email protected]>
[ Upstream commit
6b8487cdf9fc7bae707519ac5b5daeca18d1e85b][Why]
Sometimes thenew_crtc_state->vrr_infopacketdid not sync up with the current state.
It will affect theupdate_freesync_state_on_stream()does not update the state correctly.
Quoted 3 lines
[How]
Reset the freesync config beforeget_freesync_config_for_crtc()to make sure we have the correctnew_crtc_statefor VRR.
Please drop this patch from the stable queue entirely, since it has already been reverted (as of commit dc1000bf463d ("Revert "drm/amd/display: Reset freesync config before update new state"")).
Quoted 23 lines
Reviewed-by Sun peng Li <[email protected]>Signed-off-by Jerry Zuo <[email protected]>Signed-off-by Tom Chung <[email protected]>Tested-by Daniel Wheeler <[email protected]>Signed-off-by Alex Deucher <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+)drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1
-0@@ -10028,6 +10028,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, }/* Update Freesync settings. */ +reset_freesync_config_for_crtc (dm_new_crtc_state);get_freesync_config_for_crtc (dm_new_crtc_state, dm_new_conn_state);
Signature · 1 line
Hamza
Sasha Levin
maintainerRe: [PATCH AUTOSEL 6.9 11/22] drm/amd/display: Reset freesync config before update new state
Quoted 13 lines · Hamza Mahfooz
Hi Sasha,
Quoted 10 lines · Sasha Levin
From: Tom Chung <[email protected]>
[ Upstream commit
6b8487cdf9fc7bae707519ac5b5daeca18d1e85b][Why]
Sometimes thenew_crtc_state->vrr_infopacketdid not sync up with the current state.
It will affect theupdate_freesync_state_on_stream()does not update the state correctly.
Quoted 7 lines
Quoted 3 lines
[How]
Reset the freesync config beforeget_freesync_config_for_crtc()to make sure we have the correctnew_crtc_statefor VRR.Please drop this patch from the stable queue entirely, since it has already been reverted (as of commit
dc1000bf463d("Revert "drm/amd/display: Reset freesync config before update new state"")).
Dropped, thanks!
Signature · 2 lines
Thanks, Sasha
Sasha Levin
maintainerPATCH 12/22 drm/amd/display: Add refresh rate range check
In reply to Sasha LevinFrom: Tom Chung <[email protected]>
[ Upstream commit 74ad26b36d303ac233eccadc5c3a8d7ee4709f31 ]
[Why]
We only enable the VRR while monitor usable refresh rate range is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
[How]
Add a refresh rate range check before set the freesync_capable flag in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +3 -1
@@ -11290,9 +11290,11 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector,if (is_dp_capable_without_timing_msa (adev->dm.dc, amdgpu_dm_connector)) {if (edid->features &DRM_EDID_FEATURE_CONTINUOUS_FREQ ) { - freesync_capable = true; amdgpu_dm_connector->min_vfreq = connector->display_info.monitor_range.min_vfreq; amdgpu_dm_connector->max_vfreq = connector->display_info.monitor_range.max_vfreq; +if (amdgpu_dm_connector->max_vfreq - + amdgpu_dm_connector->min_vfreq >10 ) + freesync_capable = true; }else { edid_check_required = edid->version > 1 || (edid->version == 1 &&
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 13/22 drm/amd/display: Account for cursor prefetch BW in DML1 mode support
In reply to Sasha LevinFrom: Alvin Lee <[email protected]>
[ Upstream commit 074b3a886713f69d98d30bb348b1e4cb3ce52b22 ]
[Description]
We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery).
--- drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c +3 -0
@@ -3364,6 +3364,9 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l &mode_lib->vba.UrgentBurstFactorLumaPre[k], &mode_lib->vba.UrgentBurstFactorChromaPre[k], &mode_lib->vba.NotUrgentLatencyHidingPre[k]); + + v->cursor_bw_pre[k] = mode_lib->vba.NumberOfCursors[k] * mode_lib->vba.CursorWidth[k][0 ] * mode_lib->vba.CursorBPP[k][0 ] / +8.0 / (mode_lib->vba.HTotal[k] / mode_lib->vba.PixelClock[k]) * v->VRatioPreY[i][j][k]; } {
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 14/22 drm/amd/display: Fix refresh rate range for some panel
In reply to Sasha LevinFrom: Tom Chung <[email protected]>
[ Upstream commit 9ef1548aeaa8858e7aee2152bf95cc71cdcd6dff ]
[Why]
Some of the panels does not have the refresh rate range info in base EDID and only have the refresh rate range info in DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the max/min refresh rate is 0.
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +48 -0
@@ -11162,6 +11162,49 @@ static bool parse_edid_cea(struct amdgpu_dm_connector *aconnector,return ret; } +static void parse_edid_displayid_vrr (struct drm_connector *connector, +struct edid *edid) +{ +u8 *edid_ext =NULL ; +int i; +int j =0 ; +u16 min_vfreq; +u16 max_vfreq; + +if (edid ==NULL || edid->extensions ==0 ) +return ; + +/* Find DisplayID extension */ +for (i =0 ; i < edid->extensions; i++) { + edid_ext = (void *)(edid + (i +1 )); +if (edid_ext[0 ] ==DISPLAYID_EXT ) +break ; + } + +if (edid_ext ==NULL ) +return ; + +while (j <EDID_LENGTH ) { +/* Get dynamic video timing range from DisplayID if available */ +if (EDID_LENGTH - j >13 && edid_ext[j] ==0x25 && + (edid_ext[j+1 ] &0xFE ) ==0 && (edid_ext[j+2 ] ==9 )) { + min_vfreq = edid_ext[j+9 ]; +if (edid_ext[j+1 ] &7 ) + max_vfreq = edid_ext[j+10 ] + ((edid_ext[j+11 ] &3 ) <<8 ); +else + max_vfreq = edid_ext[j+10 ]; + +if (max_vfreq && min_vfreq) { + connector->display_info.monitor_range.max_vfreq = max_vfreq; + connector->display_info.monitor_range.min_vfreq = min_vfreq; + +return ; + } + } + j++; + } +} +static int parse_amd_vsdb (struct amdgpu_dm_connector *aconnector,struct edid *edid,struct amdgpu_hdmi_vsdb_info *vsdb_info) {
@@ -11283,6 +11326,11 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector,if (!adev->dm.freesync_module) goto update; +/* Some eDP panels only have the refresh rate range info in DisplayID */ +if ((connector->display_info.monitor_range.min_vfreq ==0 || + connector->display_info.monitor_range.max_vfreq ==0 )) +parse_edid_displayid_vrr (connector, edid); +if (edid && (sink->sink_signal ==SIGNAL_TYPE_DISPLAY_PORT || sink->sink_signal ==SIGNAL_TYPE_EDP )) {bool edid_check_required = false;
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 15/22 drm/amd/display: Update efficiency bandwidth for dcn351
In reply to Sasha LevinFrom: Fangzhi Zuo <[email protected]>
[ Upstream commit 7ae37db29a8bc4d3d116a409308dd98fc3a0b1b3 ]
Fix 4k240 underflow on dcn351
--- drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +1 -0
@@ -233,6 +233,7 @@ void dml2_init_socbb_params(struct dml2_context *dml2, const struct dc *in_dc, s out->round_trip_ping_latency_dcfclk_cycles =106 ; out->smn_latency_us =2 ; out->dispclk_dppclk_vco_speed_mhz =3600 ; + out->pct_ideal_dram_bw_after_urgent_pixel_only =65.0 ;break ; }
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 16/22 drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
In reply to Sasha LevinFrom: Roman Li <[email protected]>
[ Upstream commit 0ad4b4a2f6357c45fbe444ead1a929a0b4017d03 ]
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access.
--- drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c +1 -1
@@ -294,7 +294,7 @@ void dml2_calculate_rq_and_dlg_params(const struct dc *dc, struct dc_state *cont context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = (unsigned int )in_ctx->v20.dml_core_ctx.mp.DCFCLKDeepSleep *1000 ; context->bw_ctx.bw.dcn.clk.dppclk_khz =0 ; -if (in_ctx->v20.dml_core_ctx.ms.support.FCLKChangeSupport[in_ctx->v20.scratch.mode_support_params.out_lowest_state_idx] == dml_fclock_change_unsupported) +if (in_ctx->v20.dml_core_ctx.ms.support.FCLKChangeSupport[0 ] == dml_fclock_change_unsupported) context->bw_ctx.bw.dcn.clk.fclk_p_state_change_support = false;else context->bw_ctx.bw.dcn.clk.fclk_p_state_change_support = true;
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 17/22 drm/radeon: check bo_va->bo is non-NULL before using it
In reply to Sasha LevinFrom: Pierre-Eric Pelloux-Prayer <[email protected]>
[ Upstream commit 6fb15dcbcf4f212930350eaee174bb60ed40a536 ]
The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.
--- drivers/gpu/drm/radeon/radeon_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/radeon/radeon_gem.c +1 -1
@@ -641,7 +641,7 @@ static void radeon_gem_va_update_vm(struct radeon_device *rdev,if (r) goto error_unlock; -if (bo_va->it.start) +if (bo_va->it.start && bo_va->bo) r =radeon_vm_bo_update (rdev, bo_va, bo_va->bo->tbo.resource); error_unlock:
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 18/22 btrfs: fix uninitialized return value in the ref-verify tool
In reply to Sasha LevinFrom: Filipe Manana <[email protected]>
[ Upstream commit 9da45c88e124f13a3c4d480b89b298e007fbb9e4 ]
In the ref-verify tool, when processing the inline references of an extent item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable and set it to -EINVAL if we find an extent owner inline references and simple quotas are not enabled (as well as print an error message).
--- fs/btrfs/ref-verify.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
fs/btrfs/ref-verify.c +7 -2
@@ -441,7 +441,8 @@ static int process_extent_item(struct btrfs_fs_info *fs_info,u32 item_size =btrfs_item_size (leaf, slot);unsigned long end, ptr;u64 offset, flags, count; -int type, ret; +int type; +int ret =0 ; ei = btrfs_item_ptr(leaf, slot, struct btrfs_extent_item); flags =btrfs_extent_flags (leaf, ei);
@@ -486,7 +487,11 @@ static int process_extent_item(struct btrfs_fs_info *fs_info, key->objectid, key->offset);break ;case BTRFS_EXTENT_OWNER_REF_KEY : -WARN_ON (!btrfs_fs_incompat (fs_info,SIMPLE_QUOTA )); +if (!btrfs_fs_incompat (fs_info,SIMPLE_QUOTA )) { +btrfs_err (fs_info, +"found extent owner ref without simple quotas enabled" ); + ret = -EINVAL ; + }break ;default :btrfs_err (fs_info,"invalid key type in iref" );
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 19/22 fs: better handle deep ancestor chains in is_subdir()
In reply to Sasha LevinFrom: Christian Brauner <[email protected]>
[ Upstream commit 391b59b045004d5b985d033263ccba3e941a7740 ]
Jan reported that 'cd ..' may take a long time in deep directory hierarchies under a bind-mount. If concurrent renames happen it is possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and then acquire the rename lock to handle deep ancestor chains better. The list of alternatives to this approach were less then pleasant. Change the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed effectively the same thing just that one version ended up being slightly more elegant.
--- fs/dcache.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-)
fs/dcache.c +14 -17
@@ -3029,28 +3029,25 @@ EXPORT_SYMBOL(d_splice_alias);bool is_subdir (struct dentry *new_dentry,struct dentry *old_dentry) { -bool result; +bool subdir;unsigned seq;if (new_dentry == old_dentry)return true; -do { -/* for restarting inner loop in case of seq retry */ - seq =read_seqbegin (&rename_lock); -/* -* Need rcu_readlock to protect against the d_parent trashing -* due to d_move -*/ -rcu_read_lock (); -if (d_ancestor (old_dentry, new_dentry)) - result = true; -else - result = false; -rcu_read_unlock (); - }while (read_seqretry (&rename_lock, seq)); - -return result; +/* Access d_parent under rcu as d_move() may change it. */ +rcu_read_lock (); + seq =read_seqbegin (&rename_lock); + subdir =d_ancestor (old_dentry, new_dentry); +/* Try lockless once... */ +if (read_seqretry (&rename_lock, seq)) { +/* ...else acquire lock for progress even on deep chains. */ +read_seqlock_excl (&rename_lock); + subdir =d_ancestor (old_dentry, new_dentry); +read_sequnlock_excl (&rename_lock); + } +rcu_read_unlock (); +return subdir; }EXPORT_SYMBOL (is_subdir);
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 20/22 wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
In reply to Sasha LevinFrom: Daniel Gabay <[email protected]>
[ Upstream commit 4ec17ce716bdaf680288ce680b4621b52483cc96 ]
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command version in the firmware has advanced to 4, which prevents the flag from being set correctly, fix that.
--- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +1 -1
@@ -651,7 +651,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->wiphy->features |=NL80211_FEATURE_WFA_TPC_IE_IN_PROBES ;if (iwl_fw_lookup_cmd_ver (mvm->fw,WOWLAN_KEK_KCK_MATERIAL , -IWL_FW_CMD_VER_UNKNOWN ) ==3 ) +IWL_FW_CMD_VER_UNKNOWN ) >=3 ) hw->wiphy->flags |=WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK ; if (fw_has_api(&mvm->fw->ucode_capa,
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 21/22 drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
In reply to Sasha LevinFrom: Samuel Holland <[email protected]>
[ Upstream commit 7dd646cf745c34d31e7ed2a52265e9ca8308f58f ]
Currently, we stop all the counters while a new cpu is brought online. However, the hpmevent to counter mappings are not reset. The firmware may have some stale encoding in their mapping structure which may lead to undesirable results. We have not encountered such scenario though.
--- drivers/perf/riscv_pmu_sbi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/perf/riscv_pmu_sbi.c +1 -1
@@ -634,7 +634,7 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu)* which may include counters that are not enabled yet. */ sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_STOP , -0 , pmu->cmask,0 ,0 ,0 ,0 ); +0 , pmu->cmask,SBI_PMU_STOP_FLAG_RESET ,0 ,0 ,0 ); }static inline void pmu_sbi_stop_hw_ctrs (struct riscv_pmu *pmu)
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 22/22 riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
In reply to Sasha LevinFrom: Puranjay Mohan <[email protected]>
[ Upstream commit 393da6cbb2ff89aadc47683a85269f913aa1c139 ]
ftrace_graph_ret_addr() takes an idx integer pointer that is used to optimize the stack unwinding. Pass it a valid pointer to utilize the optimizations that might be available in the future.
The commit is making riscv's usage of ftrace_graph_ret_addr() match x86_64.
--- arch/riscv/kernel/stacktrace.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/riscv/kernel/stacktrace.c +2 -1
@@ -32,6 +32,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs, bool (*fn)(void *, unsigned long), void *arg) { unsigned long fp, sp, pc; +int graph_idx =0 ;int level =0 ;if (regs) {
@@ -68,7 +69,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs, pc = regs->ra; }else { fp = frame->fp; - pc =ftrace_graph_ret_addr (current,NULL , frame->ra, + pc =ftrace_graph_ret_addr (current, &graph_idx, frame->ra, &frame->ra);if (pc == (unsigned long )ret_from_exception) {if (unlikely (!__kernel_text_address (pc) || !fn (arg, pc)))
Signature · 1 line
2.43.0