Skip to contentSkip to conversation

kernel config repository

DISCUSSION Eric Persson 5 participants 6 messages Mar 29, 2006 – Apr 1, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

I hope I'm not totally wrong here, but I figured this would be a good place to start, the kernel-config list seems a bit dead.

I've been thinking about creating a community-driven .config repository, since I havent found any good place for this sort of information. I would see it as a place for people to contribute .configs for various hardware/platforms and keep them updated and current with the kernel releases.

Perhaps this exist(i havent found any easily), or is considered a bad idea(please tell me), or is actually a good idea.

Tell me what you think, sorry if I might have sent this to the wrong list.

Keep up the good work.

Best regards,
Eric

#1 lore raw

Eric,

For ppc and ppc64, there are some config files:
arch/ppc/configs/ and arch/powerpc/configs/.

Seems none for i386.

2006/3/29, Eric Persson <[email protected]>:

Quoted 18 lines

Hi,

I hope I'm not totally wrong here, but I figured this would be a good place to start, the kernel-config list seems a bit dead.

I've been thinking about creating a community-driven .config repository, since I havent found any good place for this sort of information. I would see it as a place for people to contribute .configs for various hardware/platforms and keep them updated and current with the kernel releases.

Perhaps this exist(i havent found any easily), or is considered a bad idea(please tell me), or is actually a good idea.

Tell me what you think, sorry if I might have sent this to the wrong list.

Keep up the good work.

Quoted 8 lines

Best regards,
Eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

--
Andyliu

#2 lore raw
In reply to Eric Persson
Quoted 5 lines · Eric Persson

Hi,

I hope I'm not totally wrong here, but I figured this would be a good place to start, the kernel-config list seems a bit dead.

Quoted 9 lines

I've been thinking about creating a community-driven .config repository, since I havent found any good place for this sort of information. I would see it as a place for people to contribute .configs for various hardware/platforms and keep them updated and current with the kernel releases.

Perhaps this exist(i havent found any easily), or is considered a bad idea(please tell me), or is actually a good idea.

For some users being able to grab a pre-made .config may be valuable, but for most people I doubt it will be very useful. Peoples hardware differ a lot, so a "best" config is always going to be one that you tweak personally to match your system. If you don't want to do that you are probably just going to use a generic distro kernel anyway (or you could use the .config of the distro kernel with make oldconfig when building a new kernel).

Maybe it's a good idea, dunno, but I don't really think so.

--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html

#3 lore raw
Quoted 24 lines · Jesper Juhl
Quoted 5 lines · Eric Persson

Hi,

I hope I'm not totally wrong here, but I figured this would be a good place to start, the kernel-config list seems a bit dead.

Quoted 9 lines

I've been thinking about creating a community-driven .config repository, since I havent found any good place for this sort of information. I would see it as a place for people to contribute .configs for various hardware/platforms and keep them updated and current with the kernel releases.

Perhaps this exist(i havent found any easily), or is considered a bad idea(please tell me), or is actually a good idea.

For some users being able to grab a pre-made .config may be valuable, but for most people I doubt it will be very useful. Peoples hardware differ a lot, so a "best" config is always going to be one that you tweak personally to match your system. If you don't want to do that you are probably just going to use a generic distro kernel anyway (or you could use the .config of the distro kernel with make oldconfig when building a new kernel).

Quoted 1 line

Maybe it's a good idea, dunno, but I don't really think so.

Yes, I save the configs for every kernel that I install, so I could post those, but I don't see the usefulness of this idea.

Signature · 1 line
~Randy
#4 lore raw
In reply to Jesper Juhl
Quoted 9 lines · Jesper Juhl

For some users being able to grab a pre-made .config may be valuable, but for most people I doubt it will be very useful. Peoples hardware differ a lot, so a "best" config is always going to be one that you tweak personally to match your system. If you don't want to do that you are probably just going to use a generic distro kernel anyway (or you could use the .config of the distro kernel with make oldconfig when building a new kernel).

Maybe it's a good idea, dunno, but I don't really think so.

I understand your point, and you might as well be right.

I have experienced a very tough testing phase to make myself believe and thrust a new kernel config, before I put it to live use. I only use HP machines, most of them the same model and the difference in hardware are usually just disks, memory and speed of cpu, which affects the config inself very minmial, otherwise theyre all the same. And to hook up and see other HP(replace with any brand/model) users and see what configs they use, so all can benefit from config testing, would be a great idea, thats what I think at least.

People compiling custom kernels for whatever piece of hardware they can find will most likely not benefit, but the overall "community wisdom" that this might generate would perhaps everyone benefit from.

Today, I find it hard find information about all the different configs, more than whats in the help function in make menuconfig, but thats me. And I think its a waste if good kernel development get ignored since people dont know what config options to turn on. ;)

Well, I hope I might inspired or given some clarity on the topic, any new input from this?

Best regards,
Eric

#5 lore raw
Quoted 10 lines · Eric Persson

...
I have experienced a very tough testing phase to make myself believe and thrust a new kernel config, before I put it to live use. I only use HP machines, most of them the same model and the difference in hardware are usually just disks, memory and speed of cpu, which affects the config inself very minmial, otherwise theyre all the same.
And to hook up and see other HP(replace with any brand/model) users and see what configs they use, so all can benefit from config testing, would be a great idea, thats what I think at least.

Quoted 3 lines

People compiling custom kernels for whatever piece of hardware they can find will most likely not benefit, but the overall "community wisdom" that this might generate would perhaps everyone benefit from.

Even excluding the case that many computers are more or less unique combinations of half a dozen different components, everyone will use different settings for most hardware-independent things like e.g. file systems, preemption or networking options. Even if I had the same hardware as you have, my config settings would therefore most likely be completely different from yours.

Quoted 7 lines

Today, I find it hard find information about all the different configs, more than whats in the help function in make menuconfig, but thats me. And I think its a waste if good kernel development get ignored since people dont know what config options to turn on. ;)

Well, I hope I might inspired or given some clarity on the topic, any new input from this?

The help texts for the config options should be enough for an experienced system administrator to set the right options.

If you know about help texts that could be improved, patches to improve them are welcome.

Quoted 2 lines

Best regards,
Eric

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed