platform/x86: int3472: Add GPIO type 0x02 (strobe) mapping
PATCH 1/1 platform/x86: int3472: Add GPIO type 0x02 (strobe) mapping
Some ACPI tables on Intel Meteor Lake and Arrow Lake platforms define GPIO resources with type 0x02 for INT3472 camera sensor power control. This type is not currently handled, causing a "GPIO type 0x02 unknown; the sensor may not work" warning and preventing proper sensor power sequencing.
Map GPIO type 0x02 (strobe) to the privacy LED handler, matching the approach used for similar illumination-related GPIOs. This is consistent with the original proposal by Hao Yao [1].
Tested on a Dell Pro Max 16 Premium (Arrow Lake-H) with OmniVision OV08F4 sensor connected via Intel IPU6 and Synaptics SVP7500 USBIO bridge. With this patch applied, the int3472-discrete driver no longer warns about unknown GPIO type 0x02, and the sensor probes successfully.
[1] https://lore.kernel.org/all/[email protected]/
--- drivers/platform/x86/intel/int3472/discrete.c | 3 +++ include/linux/platform_data/x86/int3472.h | 1 + 2 files changed, 4 insertions(+)
drivers/platform/x86/intel/int3472/discrete.c +3 -0
@@ -211,6 +211,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 *con_id ="clk-enable" ; *gpio_flags =GPIO_ACTIVE_HIGH ;break ; +case INT3472_GPIO_TYPE_STROBE :case INT3472_GPIO_TYPE_PRIVACY_LED : *con_id ="privacy-led" ; *gpio_flags =GPIO_ACTIVE_HIGH ;
@@ -330,6 +331,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,break ;case INT3472_GPIO_TYPE_CLK_ENABLE : +case INT3472_GPIO_TYPE_STROBE :case INT3472_GPIO_TYPE_PRIVACY_LED :case INT3472_GPIO_TYPE_POWER_ENABLE :case INT3472_GPIO_TYPE_HANDSHAKE :
@@ -347,6 +349,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, err_msg ="Failed to register clock\n" ;break ; +case INT3472_GPIO_TYPE_STROBE :case INT3472_GPIO_TYPE_PRIVACY_LED : ret =skl_int3472_register_pled (int3472, gpio);if (ret)
include/linux/platform_data/x86/int3472.h +1 -0
@@ -23,6 +23,7 @@/* PMIC GPIO Types */ #define INT3472_GPIO_TYPE_RESET 0x00#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_STROBE 0x02#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d
Signature · 1 line
2.47.3