Skip to contentSkip to conversation

atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot

PATCH In review Greg Czerniak 3 participants 3 messages Jan 21, 2019 – Jan 27, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot

I'm working on getting OpenBSD to run on the Atmel SAMA5D3 Xplained. OpenBSD uses an EFI bootloader, which requires the "load" command to work, since "fatload" doesn't initialize the EFI memory addresses properly. To get "load" on the SAMA5D3 version of U-Boot, I propose adding the CONFIG_CMD_FS_GENERIC option.

---
 configs/sama5d3_xplained_mmc_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/sama5d3_xplained_mmc_defconfig +1 -0
index eab38ec366..57a163bd58 100644
@@ -76,6 +76,7 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y

--
2.19.1

#1 lore raw

PATCH 1/1 atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot

Hi Greg,

Quoted 5 lines · Greg Czerniak

I'm working on getting OpenBSD to run on the Atmel SAMA5D3 Xplained. OpenBSD uses an EFI bootloader, which requires the "load" command to work, since "fatload" doesn't initialize the EFI memory addresses properly. To get "load" on the SAMA5D3 version of U-Boot, I propose adding the CONFIG_CMD_FS_GENERIC option.

Thanks for the patch, can you clean up the commit message please? Remove the "I'm working on..."
Relate strictly to what this patch does and why, like enabling CMD_FS_GENERIC because load command is needed to boot OpenBSD with properly initialized EFI ... etc.

Commit message: configs: sama5d3_xplained_mmc: ***your short message***

Eugen

Quoted 28 lines
---
  configs/sama5d3_xplained_mmc_defconfig | 1 +
  1 file changed, 1 insertion(+)
configs/sama5d3_xplained_mmc_defconfig +1 -1
index eab38ec366..57a163bd58 100644
@@ -76,6 +76,7 @@ CONFIG_USB=y
  CONFIG_DM_USB=y
  CONFIG_USB_EHCI_HCD=y
  CONFIG_USB_STORAGE=y
+CONFIG_CMD_FS_GENERIC=y
  CONFIG_W1=y
  CONFIG_W1_GPIO=y
  CONFIG_W1_EEPROM=y
--

2.19.1

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

#2 lore raw
In reply to Greg Czerniak
Quoted 7 lines · Greg Czerniak

I'm working on getting OpenBSD to run on the Atmel SAMA5D3 Xplained. OpenBSD uses an EFI bootloader, which requires the "load" command to work, since "fatload" doesn't initialize the EFI memory addresses properly. To get "load" on the SAMA5D3 version of U-Boot, I propose adding the CONFIG_CMD_FS_GENERIC option.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190126/a5d1067e/attachment.sig>