Skip to contentSkip to conversation

replacing a failling disk on a mirrred VG.

linux-lvm Georges Giralt 3 participants 5 messages Feb 4, 2007 – Feb 8, 2007

lore
Share & tools
lore
#0 lore raw

Hi !
I run A Fedora Core 6 box with
lvm> version
LVM version: 2.02.17 (2006-12-14)
Library version: 1.02.13 (2006-11-28)
Driver version: 4.10.0
lvm>
on a 2.6.19 kernel.
My VG comprises 3PV onto which I've spread 4 mirrored LVs.
PV 0 : LV1 mirror copy 0, LV2 mirror copy 0, lv3 mirror copy 0 and lv4 mirror copy 0 PV 1 : LV1 mirror copy 1, LV2 mirror log, LV3 mirror log and LV4 mirror copy 1 PV2 : LV1 mirror log, LV2 mirror copy 1 , LV3 mirror copy 1 and LV4 mirror log. I plan to replace (Smart signals a future failure) the PV #1.
Question : What is the best route to do this ? And is it feasible ? Thanks a lot in advance for your answer !

Signature · 3 lines
Ce message est constitu� d'au moins 50 % d'�lectrons recycl�s.
S'il vous pla�t, aidez nous � conserver nos ressources,
recyclez vos �lectrons !
#1 lore raw

This one should be pretty easy...

Effectively, you want to keep the primary mirror devices, so do:
lvconvert -m0 <vg/lv>
to down convert them to linear devices.

Then remove PV1 (vgreduce), add a new disk to your system, add it to your vg (vgextend), and finally, up-convert the linear devices to mirrors again:
lvconvert -m1 <vg/lv>

brassow

Quoted 26 lines · Georges Giralt

Hi !
I run A Fedora Core 6 box with
lvm> version
LVM version: 2.02.17 (2006-12-14)
Library version: 1.02.13 (2006-11-28)
Driver version: 4.10.0
lvm>
on a 2.6.19 kernel.
My VG comprises 3PV onto which I've spread 4 mirrored LVs.
PV 0 : LV1 mirror copy 0, LV2 mirror copy 0, lv3 mirror copy 0 and lv4 mirror copy 0 PV 1 : LV1 mirror copy 1, LV2 mirror log, LV3 mirror log and LV4 mirror copy 1 PV2 : LV1 mirror log, LV2 mirror copy 1 , LV3 mirror copy 1 and LV4 mirror log. I plan to replace (Smart signals a future failure) the PV #1.
Question : What is the best route to do this ? And is it feasible ? Thanks a lot in advance for your answer !

Signature · 9 lines
Ce message est constitu� d'au moins 50 % d'�lectrons recycl�s.
S'il vous pla�t, aidez nous � conserver nos ressources,
recyclez vos �lectrons !

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
#2 lore raw
Quoted 8 lines · Jonathan E Brassow

This one should be pretty easy...

Effectively, you want to keep the primary mirror devices, so do:
lvconvert -m0 <vg/lv>
to down convert them to linear devices.

Then remove PV1 (vgreduce), add a new disk to your system, add it to your vg (vgextend), and finally, up-convert the linear devices to mirrors again:
lvconvert -m1 <vg/lv>

So you can't just add a new disk and use pvmove to move extents off of the failing disk?

Quoted 17 lines · Georges Giralt
Quoted 16 lines

Hi !
I run A Fedora Core 6 box with
lvm> version
LVM version: 2.02.17 (2006-12-14)
Library version: 1.02.13 (2006-11-28)
Driver version: 4.10.0
lvm>
on a 2.6.19 kernel.
My VG comprises 3PV onto which I've spread 4 mirrored LVs.
PV 0 : LV1 mirror copy 0, LV2 mirror copy 0, lv3 mirror copy 0 and lv4 mirror copy 0 PV 1 : LV1 mirror copy 1, LV2 mirror log, LV3 mirror log and LV4 mirror copy 1 PV2 : LV1 mirror log, LV2 mirror copy 1 , LV3 mirror copy 1 and LV4 mirror log. I plan to replace (Smart signals a future failure) the PV #1.
Question : What is the best route to do this ? And is it feasible ? Thanks a lot in advance for your answer !

#3 lore raw
Quoted 10 lines · Steve Wray
Quoted 6 lines · Jonathan E Brassow

This one should be pretty easy...
Effectively, you want to keep the primary mirror devices, so do:
lvconvert -m0 <vg/lv>
to down convert them to linear devices.
Then remove PV1 (vgreduce), add a new disk to your system, add it to your vg (vgextend), and finally, up-convert the linear devices to mirrors again:
lvconvert -m1 <vg/lv>

So you can't just add a new disk and use pvmove to move extents off of the failing disk?

You could if it was a linear device, but we are still working on the proper stacking of mirrors.

brassow

#4 lore raw
In reply to Jonathan E Brassow

Jonathan E Brassow a �crit :

Quoted 6 lines

This one should be pretty easy...

Effectively, you want to keep the primary mirror devices, so do:
lvconvert -m0 <vg/lv>
to down convert them to linear devices.

Quoted 22 lines

Then remove PV1 (vgreduce), add a new disk to your system, add it to your vg (vgextend), and finally, up-convert the linear devices to mirrors again:
lvconvert -m1 <vg/lv>

brassow

Quoted 15 lines · Georges Giralt

Hi !
I run A Fedora Core 6 box with
lvm> version
LVM version: 2.02.17 (2006-12-14)
Library version: 1.02.13 (2006-11-28)
Driver version: 4.10.0
lvm>
on a 2.6.19 kernel.
My VG comprises 3PV onto which I've spread 4 mirrored LVs.
PV 0 : LV1 mirror copy 0, LV2 mirror copy 0, lv3 mirror copy 0 and lv4 mirror copy 0 PV 1 : LV1 mirror copy 1, LV2 mirror log, LV3 mirror log and LV4 mirror copy 1 PV2 : LV1 mirror log, LV2 mirror copy 1 , LV3 mirror copy 1 and LV4 mirror log. I plan to replace (Smart signals a future failure) the PV #1.
Question : What is the best route to do this ? And is it feasible ? Thanks a lot in advance for your answer !

Hi Brassov !
Your method was like a walk in a park.
Thanks !

Signature · 3 lines
Ce message est constitu� d'au moins 50 % d'�lectrons recycl�s.
S'il vous pla�t, aidez nous � conserver nos ressources,
recyclez vos �lectrons !