iio: light: vcnl4000: drop enum ID table and use device-managed register
cover iio: light: vcnl4000: drop enum ID table and use device-managed register
This patch series drops the enum ID table for device enumeration and instead adds pointers to chip ID structs directly. Necessary information about the device is then taken from i2c_get_match_data() call. This removes the association between enum ID table and struct table and allows for easier addition and removal of new devices.
Along with that, an iio_device_register() call is replaced with its device-managed counterpart, to ensure that device is unregistered automatically.
No functional changes are intended.
---
Erikas Bitovtas (3):
iio: light: vcnl4000: validate device by prod ID instead of table ID
iio: light: vcnl4000: drop enum id table in favor of chip structs
iio: light: vcnl4000: register an IIO device with a device-managed function
drivers/iio/light/vcnl4000.c | 208 +++++++++++++++++++++---------------------- 1 file changed, 102 insertions(+), 106 deletions(-)
---
base-commit: 36ece9697e89016181e5ae87510e40fb31d86f2b
change-id: 20260401-vcnl4000-drop-enum-0238061fcff8
Best regards,
Signature · 1 line
Erikas Bitovtas <[email protected]>
PATCH 1/3 iio: light: vcnl4000: validate device by prod ID instead of table ID
Add a new field for vcnl4000_chip_spec and check if we have the right device by that instead of the index from enum table. This leaves the enum table being used only for picking the right vcnl4000_chip_spec, allowing us to drop it later on.
--- drivers/iio/light/vcnl4000.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/iio/light/vcnl4000.c +8 -2
@@ -234,6 +234,7 @@ struct vcnl4000_chip_spec {const int (*als_it_times)[][2 ];const int num_als_it_times;const unsigned int ulux_step; +const int prod_id; };static const struct i2c_device_id vcnl4000_id[] = {
@@ -265,12 +266,12 @@ static int vcnl4000_init(struct vcnl4000_data *data) prod_id = ret >>4 ;switch (prod_id) {case VCNL4000_PROD_ID : -if (data->id !=VCNL4000 ) +if (data->chip_spec->prod_id !=VCNL4000_PROD_ID )dev_warn (&data->client->dev,"wrong device id, use vcnl4000" );break ;case VCNL4010_PROD_ID : -if (data->id !=VCNL4010 ) +if (data->chip_spec->prod_id !=VCNL4010_PROD_ID )dev_warn (&data->client->dev,"wrong device id, use vcnl4010/4020" );break ;
@@ -1901,6 +1902,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .int_reg = VCNL4040_INT_FLAGS, .ps_it_times = &vcnl4040_ps_it_times, .num_ps_it_times = ARRAY_SIZE(vcnl4040_ps_it_times), + .prod_id = VCNL4040_PROD_ID, }, [VCNL4000] = { .prod = "VCNL4000",
@@ -1911,6 +1913,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .channels = vcnl4000_channels, .num_channels = ARRAY_SIZE(vcnl4000_channels), .info = &vcnl4000_info, + .prod_id = VCNL4000_PROD_ID, }, [VCNL4010] = { .prod = "VCNL4010/4020",
@@ -1924,6 +1927,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .irq_thread = vcnl4010_irq_thread, .trig_buffer_func = vcnl4010_trigger_handler, .buffer_setup_ops = &vcnl4010_buffer_ops, + .prod_id = VCNL4010_PROD_ID, }, [VCNL4040] = { .prod = "VCNL4040",
@@ -1941,6 +1945,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .als_it_times = &vcnl4040_als_it_times, .num_als_it_times = ARRAY_SIZE(vcnl4040_als_it_times), .ulux_step = 100000, + .prod_id = VCNL4040_PROD_ID, }, [VCNL4200] = { .prod = "VCNL4200",
@@ -1958,6 +1963,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .als_it_times = &vcnl4200_als_it_times, .num_als_it_times = ARRAY_SIZE(vcnl4200_als_it_times), .ulux_step = 24000, + .prod_id = VCNL4200_PROD_ID, }, };
Signature · 1 line
2.52.0
PATCH 2/3 iio: light: vcnl4000: drop enum id table in favor of chip structs
In reply to Erikas BitovtasInstead of creating an enum table with chip IDs, store pointers to structs directly. This drops the association between chip structs and enum IDs and allows for easier addition or removal of new devices.
--- drivers/iio/light/vcnl4000.c | 205 +++++++++++++++++++++---------------------- 1 file changed, 98 insertions(+), 107 deletions(-)
drivers/iio/light/vcnl4000.c +98 -107
@@ -185,14 +185,6 @@ static const int vcnl4040_ps_oversampling_ratio[] = {1, 2, 4, 8};#define VCNL4000_SLEEP_DELAY_MS 2000/* before we enter pm_runtime_suspend */ -enum vcnl4000_device_ids { -CM36672P , -VCNL4000 , -VCNL4010 , -VCNL4040 , -VCNL4200 , -}; -struct vcnl4200_channel {u8 reg;ktime_t last_measurement;
@@ -202,7 +194,6 @@ struct vcnl4200_channel {struct vcnl4000_data {struct i2c_client *client; -enum vcnl4000_device_ids id;int rev;int al_scale;int ps_scale;
@@ -237,18 +228,6 @@ struct vcnl4000_chip_spec {const int prod_id; }; -static const struct i2c_device_id vcnl4000_id[] = { - {"cm36672p" ,CM36672P }, - {"cm36686" ,VCNL4040 }, - {"vcnl4000" ,VCNL4000 }, - {"vcnl4010" ,VCNL4010 }, - {"vcnl4020" ,VCNL4010 }, - {"vcnl4040" ,VCNL4040 }, - {"vcnl4200" ,VCNL4200 }, - { } -}; -MODULE_DEVICE_TABLE (i2c, vcnl4000_id); -static int vcnl4000_set_power_state (struct vcnl4000_data *data,bool on) {/* no suspend op */
@@ -1889,82 +1868,84 @@ static const struct iio_info vcnl4040_info = { .read_avail = vcnl4040_read_avail, }; -static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { - [CM36672P ] = { - .prod ="CM36672P" , - .init = vcnl4200_init, - .measure_proximity = vcnl4200_measure_proximity, - .set_power_state = vcnl4200_set_power_state, - .channels = cm36672p_channels, - .num_channels =ARRAY_SIZE (cm36672p_channels), - .info = &vcnl4040_info, - .irq_thread = vcnl4040_irq_thread, - .int_reg =VCNL4040_INT_FLAGS , - .ps_it_times = &vcnl4040_ps_it_times, - .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), - .prod_id =VCNL4040_PROD_ID , - }, - [VCNL4000 ] = { - .prod ="VCNL4000" , - .init = vcnl4000_init, - .measure_light = vcnl4000_measure_light, - .measure_proximity = vcnl4000_measure_proximity, - .set_power_state = vcnl4000_set_power_state, - .channels = vcnl4000_channels, - .num_channels =ARRAY_SIZE (vcnl4000_channels), - .info = &vcnl4000_info, - .prod_id =VCNL4000_PROD_ID , - }, - [VCNL4010 ] = { - .prod ="VCNL4010/4020" , - .init = vcnl4000_init, - .measure_light = vcnl4000_measure_light, - .measure_proximity = vcnl4000_measure_proximity, - .set_power_state = vcnl4000_set_power_state, - .channels = vcnl4010_channels, - .num_channels =ARRAY_SIZE (vcnl4010_channels), - .info = &vcnl4010_info, - .irq_thread = vcnl4010_irq_thread, - .trig_buffer_func = vcnl4010_trigger_handler, - .buffer_setup_ops = &vcnl4010_buffer_ops, - .prod_id =VCNL4010_PROD_ID , - }, - [VCNL4040 ] = { - .prod ="VCNL4040" , - .init = vcnl4200_init, - .measure_light = vcnl4200_measure_light, - .measure_proximity = vcnl4200_measure_proximity, - .set_power_state = vcnl4200_set_power_state, - .channels = vcnl4040_channels, - .num_channels =ARRAY_SIZE (vcnl4040_channels), - .info = &vcnl4040_info, - .irq_thread = vcnl4040_irq_thread, - .int_reg =VCNL4040_INT_FLAGS , - .ps_it_times = &vcnl4040_ps_it_times, - .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), - .als_it_times = &vcnl4040_als_it_times, - .num_als_it_times =ARRAY_SIZE (vcnl4040_als_it_times), - .ulux_step =100000 , - .prod_id =VCNL4040_PROD_ID , - }, - [VCNL4200 ] = { - .prod ="VCNL4200" , - .init = vcnl4200_init, - .measure_light = vcnl4200_measure_light, - .measure_proximity = vcnl4200_measure_proximity, - .set_power_state = vcnl4200_set_power_state, - .channels = vcnl4040_channels, - .num_channels =ARRAY_SIZE (vcnl4000_channels), - .info = &vcnl4040_info, - .irq_thread = vcnl4040_irq_thread, - .int_reg =VCNL4200_INT_FLAGS , - .ps_it_times = &vcnl4200_ps_it_times, - .num_ps_it_times =ARRAY_SIZE (vcnl4200_ps_it_times), - .als_it_times = &vcnl4200_als_it_times, - .num_als_it_times =ARRAY_SIZE (vcnl4200_als_it_times), - .ulux_step =24000 , - .prod_id =VCNL4200_PROD_ID , - }, +static const struct vcnl4000_chip_spec cm36672p_spec = { + .prod ="CM36672P" , + .init = vcnl4200_init, + .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, + .channels = cm36672p_channels, + .num_channels =ARRAY_SIZE (cm36672p_channels), + .info = &vcnl4040_info, + .irq_thread = vcnl4040_irq_thread, + .int_reg =VCNL4040_INT_FLAGS , + .ps_it_times = &vcnl4040_ps_it_times, + .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), + .prod_id =VCNL4040_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4000_spec = { + .prod ="VCNL4000" , + .init = vcnl4000_init, + .measure_light = vcnl4000_measure_light, + .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, + .channels = vcnl4000_channels, + .num_channels =ARRAY_SIZE (vcnl4000_channels), + .info = &vcnl4000_info, + .prod_id =VCNL4000_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4010_spec = { + .prod ="VCNL4010/4020" , + .init = vcnl4000_init, + .measure_light = vcnl4000_measure_light, + .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, + .channels = vcnl4010_channels, + .num_channels =ARRAY_SIZE (vcnl4010_channels), + .info = &vcnl4010_info, + .irq_thread = vcnl4010_irq_thread, + .trig_buffer_func = vcnl4010_trigger_handler, + .buffer_setup_ops = &vcnl4010_buffer_ops, + .prod_id =VCNL4010_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4040_spec = { + .prod ="VCNL4040" , + .init = vcnl4200_init, + .measure_light = vcnl4200_measure_light, + .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, + .channels = vcnl4040_channels, + .num_channels =ARRAY_SIZE (vcnl4040_channels), + .info = &vcnl4040_info, + .irq_thread = vcnl4040_irq_thread, + .int_reg =VCNL4040_INT_FLAGS , + .ps_it_times = &vcnl4040_ps_it_times, + .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), + .als_it_times = &vcnl4040_als_it_times, + .num_als_it_times =ARRAY_SIZE (vcnl4040_als_it_times), + .ulux_step =100000 , + .prod_id =VCNL4040_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4200_spec = { + .prod ="VCNL4200" , + .init = vcnl4200_init, + .measure_light = vcnl4200_measure_light, + .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, + .channels = vcnl4040_channels, + .num_channels =ARRAY_SIZE (vcnl4000_channels), + .info = &vcnl4040_info, + .irq_thread = vcnl4040_irq_thread, + .int_reg =VCNL4200_INT_FLAGS , + .ps_it_times = &vcnl4200_ps_it_times, + .num_ps_it_times =ARRAY_SIZE (vcnl4200_ps_it_times), + .als_it_times = &vcnl4200_als_it_times, + .num_als_it_times =ARRAY_SIZE (vcnl4200_als_it_times), + .ulux_step =24000 , + .prod_id =VCNL4200_PROD_ID , };static const struct iio_trigger_ops vcnl4010_trigger_ops = {
@@ -1991,7 +1972,6 @@ static int vcnl4010_probe_trigger(struct iio_dev *indio_dev)static int vcnl4000_probe (struct i2c_client *client) { -const struct i2c_device_id *id =i2c_client_get_device_id (client);const char *const regulator_names[] = {"vdd" ,"vio" ,"vled" };struct device *dev = &client->dev;struct vcnl4000_data *data;
@@ -2005,8 +1985,7 @@ static int vcnl4000_probe(struct i2c_client *client) data =iio_priv (indio_dev);i2c_set_clientdata (client, indio_dev); data->client = client; - data->id = id->driver_data; - data->chip_spec = &vcnl4000_chip_spec_cfg[data->id]; + data->chip_spec =i2c_get_match_data (client); ret =devm_regulator_bulk_get_enable (dev,ARRAY_SIZE (regulator_names), regulator_names);
@@ -2081,32 +2060,32 @@ static int vcnl4000_probe(struct i2c_client *client)static const struct of_device_id vcnl_4000_of_match[] = { { .compatible ="capella,cm36672p" , - .data = (void *)CM36672P , + .data = &cm36672p_spec, },/* Capella CM36686 is fully compatible with Vishay VCNL4040 */ { .compatible ="capella,cm36686" , - .data = (void *)VCNL4040 , + .data = &vcnl4040_spec, }, { .compatible ="vishay,vcnl4000" , - .data = (void *)VCNL4000 , + .data = &vcnl4000_spec, }, { .compatible ="vishay,vcnl4010" , - .data = (void *)VCNL4010 , + .data = &vcnl4010_spec, }, { .compatible ="vishay,vcnl4020" , - .data = (void *)VCNL4010 , + .data = &vcnl4010_spec, }, { .compatible ="vishay,vcnl4040" , - .data = (void *)VCNL4040 , + .data = &vcnl4040_spec, }, { .compatible ="vishay,vcnl4200" , - .data = (void *)VCNL4200 , + .data = &vcnl4200_spec, }, { } };
@@ -2148,6 +2127,18 @@ static int vcnl4000_runtime_resume(struct device *dev) static DEFINE_RUNTIME_DEV_PM_OPS(vcnl4000_pm_ops, vcnl4000_runtime_suspend, vcnl4000_runtime_resume, NULL); +static const struct i2c_device_id vcnl4000_id[] = { + {"cm36672p" , (kernel_ulong_t)&cm36672p_spec }, + {"cm36686" , (kernel_ulong_t)&vcnl4040_spec }, + {"vcnl4000" , (kernel_ulong_t)&vcnl4000_spec }, + {"vcnl4010" , (kernel_ulong_t)&vcnl4010_spec }, + {"vcnl4020" , (kernel_ulong_t)&vcnl4010_spec }, + {"vcnl4040" , (kernel_ulong_t)&vcnl4040_spec }, + {"vcnl4200" , (kernel_ulong_t)&vcnl4200_spec }, + { } +}; +MODULE_DEVICE_TABLE (i2c, vcnl4000_id); +static struct i2c_driver vcnl4000_driver = { .driver = { .name =VCNL4000_DRV_NAME ,
Signature · 1 line
2.52.0
Re: [PATCH 2/3] iio: light: vcnl4000: drop enum id table in favor of chip structs
Quoted 3 lines · Erikas Bitovtas
Instead of creating an enum table with chip IDs, store pointers to structs directly. This drops the association between chip structs and enum IDs and allows for easier addition or removal of new devices.
...
drivers/iio/light/vcnl4000.c static int vcnl4000_probe(struct i2c_client *client) · line 2064
Quoted 6 lines
static const struct
of_device_idvcnl_4000_of_match[] = {drivers/iio/light/vcnl4000.c +1
-1{ .compatible = "capella,cm36672p", - .data = (void *)CM36672P, + .data = &cm36672p_spec, },
Also can be collapsed to smaller number of LoC.
{ .compatible = "capella,cm36672p", .data = &cm36672p_spec, },But I fine with current approach. If you want to collapse, it's probably better to do in a separate patch.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH 3/3 iio: light: vcnl4000: register an IIO device with a device-managed function
In reply to Erikas BitovtasUse a device-managed counterpart of iio_device_register() and remove the redundant iio_device_unregister() call in driver remove function.
--- drivers/iio/light/vcnl4000.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/iio/light/vcnl4000.c +1 -2
@@ -2043,7 +2043,7 @@ static int vcnl4000_probe(struct i2c_client *client)if (ret <0 ) goto fail_poweroff; - ret =iio_device_register (indio_dev); + ret =devm_iio_device_register (dev, indio_dev);if (ret <0 ) goto fail_poweroff;
@@ -2099,7 +2099,6 @@ static void vcnl4000_remove(struct i2c_client *client)pm_runtime_dont_use_autosuspend (&client->dev);pm_runtime_disable (&client->dev); -iio_device_unregister (indio_dev);pm_runtime_set_suspended (&client->dev); ret = data->chip_spec->set_power_state (data, false);
Signature · 1 line
2.52.0
Re: [PATCH 3/3] iio: light: vcnl4000: register an IIO device with a device-managed function
Quoted 2 lines · Erikas Bitovtas
Use a device-managed counterpart of
iio_device_register()and remove the redundantiio_device_unregister()call in driver remove function.
...
drivers/iio/light/vcnl4000.c static int vcnl4000_probe(struct i2c_client *client) · line 2048
Quoted 4 lines
drivers/iio/light/vcnl4000.c +1
-1- ret =iio_device_register (indio_dev); + ret =devm_iio_device_register (dev, indio_dev);if (ret <0 ) goto fail_poweroff;
^^^^ This goto is sign of a still existing ordering issue. so this patch is half-baked.
Signature · 2 lines
With Best Regards, Andy Shevchenko