hinic: add set_channels ethtool_ops support
Subsystems (3)
PATCH v5 1/1 hinic: add set_channels ethtool_ops support
add support to change TX/RX queue number with "ethtool -L combined".
V4 -> V5: change time zone in patch header
V4 -> V3: update date in patch header
V3 -> V2: remove check for zero channels->combined_count
V1 -> V2: update commit message("ethtool -L" to "ethtool -L combined") V0 -> V1: remove check for channels->tx_count/rx_count/other_count
--- .../net/ethernet/huawei/hinic/hinic_ethtool.c | 40 +++++++++++++++---- .../net/ethernet/huawei/hinic/hinic_main.c | 2 +- drivers/net/ethernet/huawei/hinic/hinic_tx.c | 5 +++ 3 files changed, 38 insertions(+), 9 deletions(-)
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +32 -8
@@ -619,14 +619,37 @@ static void hinic_get_channels(struct net_device *netdev,struct hinic_dev *nic_dev =netdev_priv (netdev);struct hinic_hwdev *hwdev = nic_dev->hwdev; - channels->max_rx = hwdev->nic_cap.max_qps; - channels->max_tx = hwdev->nic_cap.max_qps; - channels->max_other =0 ; - channels->max_combined =0 ; - channels->rx_count =hinic_hwdev_num_qps (hwdev); - channels->tx_count =hinic_hwdev_num_qps (hwdev); - channels->other_count =0 ; - channels->combined_count =0 ; + channels->max_combined = nic_dev->max_qps; + channels->combined_count =hinic_hwdev_num_qps (hwdev); +} + +static int hinic_set_channels (struct net_device *netdev, +struct ethtool_channels *channels) +{ +struct hinic_dev *nic_dev =netdev_priv (netdev); +unsigned int count = channels->combined_count; +int err; + +netif_info (nic_dev, drv, netdev,"Set max combined queue number from %d to %d\n" , +hinic_hwdev_num_qps (nic_dev->hwdev), count); + +if (netif_running (netdev)) { +netif_info (nic_dev, drv, netdev,"Restarting netdev\n" ); +hinic_close (netdev); + + nic_dev->hwdev->nic_cap.num_qps = count; + + err =hinic_open (netdev); +if (err) { +netif_err (nic_dev, drv, netdev, +"Failed to open netdev\n" ); +return -EFAULT ; + } + }else { + nic_dev->hwdev->nic_cap.num_qps = count; + } + +return 0 ; } static int hinic_get_rss_hash_opts(struct hinic_dev *nic_dev,
@@ -1219,6 +1242,7 @@ static const struct ethtool_ops hinic_ethtool_ops = { .get_ringparam = hinic_get_ringparam, .set_ringparam = hinic_set_ringparam, .get_channels = hinic_get_channels, + .set_channels = hinic_set_channels, .get_rxnfc = hinic_get_rxnfc, .set_rxnfc = hinic_set_rxnfc, .get_rxfh_key_size = hinic_get_rxfh_key_size,
drivers/net/ethernet/huawei/hinic/hinic_main.c +1 -1
@@ -326,7 +326,6 @@ static void hinic_enable_rss(struct hinic_dev *nic_dev)int i, node, err =0 ;u16 num_cpus =0 ; - nic_dev->max_qps =hinic_hwdev_max_num_qps (hwdev);if (nic_dev->max_qps <=1 ) { nic_dev->flags &= ~HINIC_RSS_ENABLE ; nic_dev->rss_limit = nic_dev->max_qps;
@@ -1031,6 +1030,7 @@ static int nic_dev_init(struct pci_dev *pdev) nic_dev->rq_depth =HINIC_RQ_DEPTH ; nic_dev->sriov_info.hwdev = hwdev; nic_dev->sriov_info.pdev = pdev; + nic_dev->max_qps = num_qps;sema_init (&nic_dev->mgmt_lock,1 );
drivers/net/ethernet/huawei/hinic/hinic_tx.c +5 -0
@@ -470,6 +470,11 @@ netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)struct hinic_txq *txq;struct hinic_qp *qp; +if (unlikely (!netif_carrier_ok (netdev))) { +dev_kfree_skb_any (skb); +return NETDEV_TX_OK ; + } + txq = &nic_dev->txqs[q_id]; qp = container_of(txq->sq, struct hinic_qp, sq);
Signature · 1 line
2.17.1
David Miller
maintainerFrom: Luo bin <[email protected]>
Date: Mon, 1 Jun 2020 18:57:48 +0800
drivers/net/ethernet/huawei/hinic/hinic_tx.c netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) · line 476
Quoted 8 lines
drivers/net/ethernet/huawei/hinic/hinic_tx.c +4
-0@@ -470,6 +470,11 @@ netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)struct hinic_txq *txq;struct hinic_qp *qp; +if (unlikely (!netif_carrier_ok (netdev))) { +dev_kfree_skb_any (skb); +return NETDEV_TX_OK ; + }
As stated by another reviewer, this change is unrelated to adding set_channels support. Please remove it from this patch.
Quoted 7 lines · David Miller
From: Luo bin <[email protected]>
Date: Mon, 1 Jun 2020 18:57:48 +0800Quoted 4 lines
drivers/net/ethernet/huawei/hinic/hinic_tx.c +0
-0@@ -470,6 +470,11 @@ netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)struct hinic_txq *txq;struct hinic_qp *qp;
Quoted 6 lines
drivers/net/ethernet/huawei/hinic/hinic_tx.c netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) · line 476
Quoted 4 lines
drivers/net/ethernet/huawei/hinic/hinic_tx.c +4
-0+if (unlikely (!netif_carrier_ok (netdev))) { +dev_kfree_skb_any (skb); +return NETDEV_TX_OK ; + }As stated by another reviewer, this change is unrelated to adding
set_channelssupport. Please remove it from this patch.
Will fix. Thanks.
Quoted 1 line
.