Skip to contentSkip to conversation

usb: typec: tcpm: reset internal port states on soft reset AMS

PATCH In review Amit Sunil Dhamne 2 participants 2 messages Apr 14 – Apr 15

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usb: typec: tcpm: reset internal port states on soft reset AMS

Reset internal port states (such as vdm_sm_running and explicit_contract) on soft reset AMS as the port needs to negotiate a new contract. The consequence of leaving the states in as-is cond are as follows:
* port is in SRC power role and an explicit contract is negotiated with the port partner (in sink role)
* port partner sends a Soft Reset AMS while VDM State Machine is running
* port accepts the Soft Reset request and the port advertises src caps
* port partner sends a Request message but since the explicit_contract and vdm_sm_running are true from previous negotiation, the port ends up sending Soft Reset instead of Accept msg.

Stub Log:

[  203.653942] AMS DISCOVER_IDENTITY start
[  203.653947] PD TX, header: 0x176f
[  203.655901] PD TX complete, status: 0
[  203.657470] PD RX, header: 0x124f [1]
[  203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1
[  203.657482] AMS DISCOVER_IDENTITY finished
[  203.657484] cc:=4
[  204.155698] PD RX, header: 0x144f [1]
[  204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1
[  204.155741] PD TX, header: 0x196f
[  204.157622] PD TX complete, status: 0
[  204.160060] PD RX, header: 0x4d [1]
[  204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS]
[  204.160076] PD TX, header: 0x163
[  204.162486] PD TX complete, status: 0
[  204.162832] AMS SOFT_RESET_AMS finished
[  204.162840] cc:=4
[  204.162891] AMS POWER_NEGOTIATION start
[  204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION]
[  204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION]
[  204.162913] PD TX, header: 0x1361
[  204.165529] PD TX complete, status: 0
[  204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION]
[  204.166996] PD RX, header: 0x1242 [1]
[  204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION]
[  204.167019] AMS POWER_NEGOTIATION finished
[  204.167020] cc:=4
[  204.167083] AMS SOFT_RESET_AMS start
[  204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS]
[  204.167092] PD TX, header: 0x16d
[  204.168824] PD TX complete, status: 0
[  204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS]
[  204.171876] PD RX, header: 0x43 [1]
[  204.171879] AMS SOFT_RESET_AMS finished

This causes COMMON.PROC.PD.11.2 check failure for TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester.

Fixes 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Fixes f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
---
 drivers/usb/typec/tcpm/tcpm.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/typec/tcpm/tcpm.c +2 -0
index 8e0e14a2704e..c73e5daafcf1 100644
@@ -5534,6 +5534,8 @@ static void run_state_machine(struct tcpm_port *port)
 		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
 		port->partner_source_caps = NULL;
 		tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
+		port->vdm_sm_running = false;
+		port->explicit_contract = false;
 		tcpm_ams_finish(port);
 		if (port->pwr_role == TYPEC_SOURCE) {
 			port->upcoming_state = SRC_SEND_CAPABILITIES;

---
base-commit: 81dc1e4d32b064ac47abc60b0acbf49b66a34d52
change-id: 20260407-fix-soft-reset-e857ff5e9d36

Best regards,

Signature · 1 line
Amit Sunil Dhamne <[email protected]>
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 51 lines · On Tue, Apr 14, 2026 at 12:58:32AM +0000, Amit Sunil Dhamne via B4 Relay wrote:

From: Amit Sunil Dhamne <[email protected]>

Reset internal port states (such as vdm_sm_running and explicit_contract) on soft reset AMS as the port needs to negotiate a new contract. The consequence of leaving the states in as-is cond are as follows:
* port is in SRC power role and an explicit contract is negotiated with the port partner (in sink role)
* port partner sends a Soft Reset AMS while VDM State Machine is running
* port accepts the Soft Reset request and the port advertises src caps
* port partner sends a Request message but since the explicit_contract and vdm_sm_running are true from previous negotiation, the port ends up sending Soft Reset instead of Accept msg.

Stub Log:

[  203.653942] AMS DISCOVER_IDENTITY start
[  203.653947] PD TX, header: 0x176f
[  203.655901] PD TX complete, status: 0
[  203.657470] PD RX, header: 0x124f [1]
[  203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1
[  203.657482] AMS DISCOVER_IDENTITY finished
[  203.657484] cc:=4
[  204.155698] PD RX, header: 0x144f [1]
[  204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1
[  204.155741] PD TX, header: 0x196f
[  204.157622] PD TX complete, status: 0
[  204.160060] PD RX, header: 0x4d [1]
[  204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS]
[  204.160076] PD TX, header: 0x163
[  204.162486] PD TX complete, status: 0
[  204.162832] AMS SOFT_RESET_AMS finished
[  204.162840] cc:=4
[  204.162891] AMS POWER_NEGOTIATION start
[  204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION]
[  204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION]
[  204.162913] PD TX, header: 0x1361
[  204.165529] PD TX complete, status: 0
[  204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION]
[  204.166996] PD RX, header: 0x1242 [1]
[  204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION]
[  204.167019] AMS POWER_NEGOTIATION finished
[  204.167020] cc:=4
[  204.167083] AMS SOFT_RESET_AMS start
[  204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS]
[  204.167092] PD TX, header: 0x16d
[  204.168824] PD TX complete, status: 0
[  204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS]
[  204.171876] PD RX, header: 0x43 [1]
[  204.171879] AMS SOFT_RESET_AMS finished
Quoted 8 lines

This causes COMMON.PROC.PD.11.2 check failure for TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester.

Fixes 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Fixes f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Quoted 26 lines
---
 drivers/usb/typec/tcpm/tcpm.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/typec/tcpm/tcpm.c +2 -1
index 8e0e14a2704e..c73e5daafcf1 100644
@@ -5534,6 +5534,8 @@ static void run_state_machine(struct tcpm_port *port)
 		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
 		port->partner_source_caps = NULL;
 		tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
+		port->vdm_sm_running = false;
+		port->explicit_contract = false;
 		tcpm_ams_finish(port);
 		if (port->pwr_role == TYPEC_SOURCE) {
 			port->upcoming_state = SRC_SEND_CAPABILITIES;
 
---

base-commit: 81dc1e4d32b064ac47abc60b0acbf49b66a34d52
change-id: 20260407-fix-soft-reset-e857ff5e9d36

Best regards,

Signature · 1 line
Amit Sunil Dhamne <[email protected]>
Signature · 1 line
heikki