Skip to contentSkip to conversation

bpf: Propagate error from visit_tailcall_insn

PATCH Superseded Daniel Borkmann 3 participants 9 messages Apr 8

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Daniel Borkmann

author maintainer
#0 lore raw

PATCH 1/4 bpf: Propagate error from visit_tailcall_insn

Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value.

Fixes e40f5a6bf88a ("bpf: correct stack liveness for tail calls")
---
 kernel/bpf/verifier.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +5 -2
index 594260c1f382..db009d509ade 100644
@@ -19355,8 +19355,11 @@ static int visit_insn(int t, struct bpf_verifier_env *env)
 				mark_subprog_might_sleep(env, t);
 			if (bpf_helper_changes_pkt_data(insn->imm))
 				mark_subprog_changes_pkt_data(env, t);
-			if (insn->imm == BPF_FUNC_tail_call)
-				visit_tailcall_insn(env, t);
+			if (insn->imm == BPF_FUNC_tail_call) {
+				ret = visit_tailcall_insn(env, t);
+				if (ret)
+					return ret;
+			}
 		} else if (insn->src_reg == BPF_PSEUDO_KFUNC_CALL) {
 			struct bpf_kfunc_call_arg_meta meta;
 
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/4 bpf: Fix ld_{abs,ind} failure path analysis in subprogs

Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types.

The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed.

This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Fixes 09b28d76eac4 ("bpf: Add abnormal return checks.")
---
 kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +30 -2
index db009d509ade..46f55ea6684e 100644
@@ -18357,6 +18357,22 @@ static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
 	mark_reg_unknown(env, regs, BPF_REG_0);
 	/* ld_abs load up to 32-bit skb data. */
 	regs[BPF_REG_0].subreg_def = env->insn_idx + 1;
+	/*
+	 * See bpf_gen_ld_abs() which emits a hidden BPF_EXIT with r0=0
+	 * which must be explored by the verifier when in a subprog.
+	 */
+	if (env->cur_state->curframe) {
+		struct bpf_verifier_state *branch;
+
+		branch = push_stack(env, env->insn_idx + 1, env->insn_idx, false);
+		if (IS_ERR(branch))
+			return PTR_ERR(branch);
+		mark_reg_known_zero(env, regs, BPF_REG_0);
+		err = prepare_func_exit(env, &env->insn_idx);
+		if (err)
+			return err;
+		env->insn_idx--;
+	}
 	return 0;
 }
 
@@ -19276,7 +19292,12 @@ static int visit_gotox_insn(int t, struct bpf_verifier_env *env)
 	return keep_exploring ? KEEP_EXPLORING : DONE_EXPLORING;
 }
 
-static int visit_tailcall_insn(struct bpf_verifier_env *env, int t)
+/*
+ * Instructions that can abnormally return from a subprog (tail_call
+ * upon success, ld_{abs,ind} upon load failure) have a hidden exit
+ * that the verifier must account for.
+ */
+static int visit_abnormal_return_insn(struct bpf_verifier_env *env, int t)
 {
 	static struct bpf_subprog_info *subprog;
 	struct bpf_iarray *jt;
@@ -19311,6 +19332,13 @@ static int visit_insn(int t, struct bpf_verifier_env *env)
 	/* All non-branch instructions have a single fall-through edge. */
 	if (BPF_CLASS(insn->code) != BPF_JMP &&
 	    BPF_CLASS(insn->code) != BPF_JMP32) {
+		if (BPF_CLASS(insn->code) == BPF_LD &&
+		    (BPF_MODE(insn->code) == BPF_ABS ||
+		     BPF_MODE(insn->code) == BPF_IND)) {
+			ret = visit_abnormal_return_insn(env, t);
+			if (ret)
+				return ret;
+		}
 		insn_sz = bpf_is_ldimm64(insn) ? 2 : 1;
 		return push_insn(t, t + insn_sz, FALLTHROUGH, env);
 	}
@@ -19356,7 +19384,7 @@ static int visit_insn(int t, struct bpf_verifier_env *env)
 			if (bpf_helper_changes_pkt_data(insn->imm))
 				mark_subprog_changes_pkt_data(env, t);
 			if (insn->imm == BPF_FUNC_tail_call) {
-				ret = visit_tailcall_insn(env, t);
+				ret = visit_abnormal_return_insn(env, t);
 				if (ret)
 					return ret;
 			}
Signature · 1 line
2.43.0
#2 lore raw

Re: [PATCH bpf-next 2/4] bpf: Fix ld_{abs,ind} failure path analysis in subprogs

Quoted 37 lines · Daniel Borkmann

Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types.

The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed.

This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Fixes 09b28d76eac4 ("bpf: Add abnormal return checks.")
---
 kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +5 -0
index db009d509ade..46f55ea6684e 100644
@@ -18357,6 +18357,22 @@ static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
        mark_reg_unknown(env, regs, BPF_REG_0);
        /* ld_abs load up to 32-bit skb data. */
        regs[BPF_REG_0].subreg_def = env->insn_idx + 1;
+       /*
+        * See bpf_gen_ld_abs() which emits a hidden BPF_EXIT with r0=0
+        * which must be explored by the verifier when in a subprog.
+        */
+       if (env->cur_state->curframe) {

kernel/bpf/verifier.c static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn) · line 18374

Quoted 10 lines
kernel/bpf/verifier.c +10 -0
+               struct bpf_verifier_state *branch;
+
+               branch = push_stack(env, env->insn_idx + 1, env->insn_idx, false);
+               if (IS_ERR(branch))
+                       return PTR_ERR(branch);
+               mark_reg_known_zero(env, regs, BPF_REG_0);
+               err = prepare_func_exit(env, &env->insn_idx);
+               if (err)
+                       return err;
+               env->insn_idx--;

similar code in check_helper_call() for tail_call also does mark_reg_scratched() and clear_all_pkt_pointers() which are missing here.

Pls refactor that part into a helper and call it here.

pw-bot: cr

author maintainer
#3 lore raw

Re: [PATCH bpf-next 2/4] bpf: Fix ld_{abs,ind} failure path analysis in subprogs

Quoted 44 lines · Alexei Starovoitov
Quoted 43 lines · Daniel Borkmann

Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types.

The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed.

This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Fixes 09b28d76eac4 ("bpf: Add abnormal return checks.")
---
  kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++++--
  1 file changed, 30 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +11 -0
index db009d509ade..46f55ea6684e 100644
@@ -18357,6 +18357,22 @@ static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
         mark_reg_unknown(env, regs, BPF_REG_0);
         /* ld_abs load up to 32-bit skb data. */
         regs[BPF_REG_0].subreg_def = env->insn_idx + 1;
+       /*
+        * See bpf_gen_ld_abs() which emits a hidden BPF_EXIT with r0=0
+        * which must be explored by the verifier when in a subprog.
+        */
+       if (env->cur_state->curframe) {
+               struct bpf_verifier_state *branch;
+
+               branch = push_stack(env, env->insn_idx + 1, env->insn_idx, false);
+               if (IS_ERR(branch))
+                       return PTR_ERR(branch);
+               mark_reg_known_zero(env, regs, BPF_REG_0);
Quoted 8 lines

kernel/bpf/verifier.c static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn) · line 18374

Quoted 4 lines
kernel/bpf/verifier.c +4 -0
+               err = prepare_func_exit(env, &env->insn_idx);
+               if (err)
+                       return err;
+               env->insn_idx--;

similar code in check_helper_call() for tail_call also does mark_reg_scratched() and clear_all_pkt_pointers() which are missing here.

The clear_all_pkt_pointers() is only relevant for the cases where we modify/pull/push skb data, but in ld_{abs,ind} we either read skb packet data directly in linear section or via skb_copy_bits.

I'll add the mark_reg_scratched(env, BPF_REG_0). Not sure how much this really suits to move into a common helper: the tail call case calls clear_all_pkt_pointers() and marks r0 unknown right after push_stack(), the ld_{abs,ind} case does not clear the packet pointers and marks r0 as known 0. imo its fine to leave it separate.

Quoted 3 lines

Pls refactor that part into a helper and call it here.

pw-bot: cr

#4 lore raw

Re: [PATCH bpf-next 2/4] bpf: Fix ld_{abs,ind} failure path analysis in subprogs

Quoted 59 lines · Daniel Borkmann
Quoted 44 lines · Alexei Starovoitov
Quoted 43 lines · Daniel Borkmann

Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types.

The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed.

This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Fixes 09b28d76eac4 ("bpf: Add abnormal return checks.")
---
  kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++++--
  1 file changed, 30 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +11 -0
index db009d509ade..46f55ea6684e 100644
@@ -18357,6 +18357,22 @@ static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
         mark_reg_unknown(env, regs, BPF_REG_0);
         /* ld_abs load up to 32-bit skb data. */
         regs[BPF_REG_0].subreg_def = env->insn_idx + 1;
+       /*
+        * See bpf_gen_ld_abs() which emits a hidden BPF_EXIT with r0=0
+        * which must be explored by the verifier when in a subprog.
+        */
+       if (env->cur_state->curframe) {
+               struct bpf_verifier_state *branch;
+
+               branch = push_stack(env, env->insn_idx + 1, env->insn_idx, false);
+               if (IS_ERR(branch))
+                       return PTR_ERR(branch);
+               mark_reg_known_zero(env, regs, BPF_REG_0);
Quoted 8 lines

kernel/bpf/verifier.c static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn) · line 18374

Quoted 4 lines
kernel/bpf/verifier.c +4 -0
+               err = prepare_func_exit(env, &env->insn_idx);
+               if (err)
+                       return err;
+               env->insn_idx--;

similar code in check_helper_call() for tail_call also does mark_reg_scratched() and clear_all_pkt_pointers() which are missing here.

The clear_all_pkt_pointers() is only relevant for the cases where we modify/pull/push skb data, but in ld_{abs,ind} we either read skb packet data directly in linear section or via skb_copy_bits.

Quoted 5 lines

I'll add the mark_reg_scratched(env, BPF_REG_0). Not sure how much this really suits to move into a common helper: the tail call case calls clear_all_pkt_pointers() and marks r0 unknown right after push_stack(), the ld_{abs,ind} case does not clear the packet pointers and marks r0 as known 0. imo its fine to leave it separate.

Ahh. Known zero vs unknown. I missed that. Makes sense.

btw what is the point of env->insn_idx--; ?
This and tail_call case are doing it, but why?

author maintainer
#5 lore raw

Re: [PATCH bpf-next 2/4] bpf: Fix ld_{abs,ind} failure path analysis in subprogs

Quoted 65 lines · Alexei Starovoitov
Quoted 58 lines · Daniel Borkmann
Quoted 44 lines · Alexei Starovoitov
Quoted 43 lines · Daniel Borkmann

Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types.

The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed.

This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Fixes 09b28d76eac4 ("bpf: Add abnormal return checks.")
---
   kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++++--
   1 file changed, 30 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +11 -0
index db009d509ade..46f55ea6684e 100644
@@ -18357,6 +18357,22 @@ static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
          mark_reg_unknown(env, regs, BPF_REG_0);
          /* ld_abs load up to 32-bit skb data. */
          regs[BPF_REG_0].subreg_def = env->insn_idx + 1;
+       /*
+        * See bpf_gen_ld_abs() which emits a hidden BPF_EXIT with r0=0
+        * which must be explored by the verifier when in a subprog.
+        */
+       if (env->cur_state->curframe) {
+               struct bpf_verifier_state *branch;
+
+               branch = push_stack(env, env->insn_idx + 1, env->insn_idx, false);
+               if (IS_ERR(branch))
+                       return PTR_ERR(branch);
+               mark_reg_known_zero(env, regs, BPF_REG_0);
Quoted 8 lines

kernel/bpf/verifier.c static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn) · line 18374

Quoted 4 lines
kernel/bpf/verifier.c +4 -0
+               err = prepare_func_exit(env, &env->insn_idx);
+               if (err)
+                       return err;
+               env->insn_idx--;

similar code in check_helper_call() for tail_call also does mark_reg_scratched() and clear_all_pkt_pointers() which are missing here.

The clear_all_pkt_pointers() is only relevant for the cases where we modify/pull/push skb data, but in ld_{abs,ind} we either read skb packet data directly in linear section or via skb_copy_bits.

Quoted 5 lines

I'll add the mark_reg_scratched(env, BPF_REG_0). Not sure how much this really suits to move into a common helper: the tail call case calls clear_all_pkt_pointers() and marks r0 unknown right after push_stack(), the ld_{abs,ind} case does not clear the packet pointers and marks r0 as known 0. imo its fine to leave it separate.

Quoted 4 lines

Ahh. Known zero vs unknown. I missed that. Makes sense.

btw what is the point of env->insn_idx--; ?
This and tail_call case are doing it, but why?

The prepare_func_exit() sets env->insn_idx to the caller's return site (aka the insn after the subprog call). do_check_insn() does env->insn_idx++ at the end of the function to tell "we're done processing this insn". So we need the env->insn_idx-- otherwise we're overshooting/skipping validation by one insn.

Thanks,
Daniel

author maintainer
#6 lore raw

PATCH 3/4 bpf: Remove static qualifier from local subprog pointer

In reply to Daniel Borkmann

The local subprog pointer in create_jt() and visit_abnormal_return_insn() was declared static.

It is unconditionally assigned via bpf_find_containing_subprog() before every use. Thus, the static qualifier serves no purpose and rather creates confusion. Just remove it.

Fixes e40f5a6bf88a ("bpf: correct stack liveness for tail calls")
Fixes 493d9e0d6083 ("bpf, x86: add support for indirect jumps")
---
 kernel/bpf/verifier.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +2 -2
index 46f55ea6684e..6cb54764d452 100644
@@ -19224,7 +19224,7 @@ static struct bpf_iarray *jt_from_subprog(struct bpf_verifier_env *env,
 static struct bpf_iarray *
 create_jt(int t, struct bpf_verifier_env *env)
 {
-	static struct bpf_subprog_info *subprog;
+	struct bpf_subprog_info *subprog;
 	int subprog_start, subprog_end;
 	struct bpf_iarray *jt;
 	int i;
@@ -19299,7 +19299,7 @@ static int visit_gotox_insn(int t, struct bpf_verifier_env *env)
  */
 static int visit_abnormal_return_insn(struct bpf_verifier_env *env, int t)
 {
-	static struct bpf_subprog_info *subprog;
+	struct bpf_subprog_info *subprog;
 	struct bpf_iarray *jt;
 
 	if (env->insn_aux_data[t].jt)
Signature · 1 line
2.43.0
Acked-by on v1 3/4
#7 lore raw

Re: [PATCH bpf-next 3/4] bpf: Remove static qualifier from local subprog pointer

Quoted 19 lines · Daniel Borkmann

The local subprog pointer in create_jt() and visit_abnormal_return_insn() was declared static.

It is unconditionally assigned via bpf_find_containing_subprog() before every use. Thus, the static qualifier serves no purpose and rather creates confusion. Just remove it.

Fixes e40f5a6bf88a ("bpf: correct stack liveness for tail calls")
Fixes 493d9e0d6083 ("bpf, x86: add support for indirect jumps")
---
 kernel/bpf/verifier.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/bpf/verifier.c +0 -0
index 46f55ea6684e..6cb54764d452 100644

kernel/bpf/verifier.c static struct bpf_iarray *jt_from_subprog(struct bpf_verifier_env *env, · line 19227

Quoted 5 lines
kernel/bpf/verifier.c +1 -1
@@ -19224,7 +19224,7 @@ static struct bpf_iarray *jt_from_subprog(struct bpf_verifier_env *env,
 static struct bpf_iarray *
 create_jt(int t, struct bpf_verifier_env *env)
 {
-	static struct bpf_subprog_info *subprog;
+	struct bpf_subprog_info *subprog;

I wonder where I copy-pasted this from... Thanks!

Quoted 14 lines
kernel/bpf/verifier.c +1 -1
 	int subprog_start, subprog_end;
 	struct bpf_iarray *jt;
 	int i;
@@ -19299,7 +19299,7 @@ static int visit_gotox_insn(int t, struct bpf_verifier_env *env)
  */
 static int visit_abnormal_return_insn(struct bpf_verifier_env *env, int t)
 {
-	static struct bpf_subprog_info *subprog;
+	struct bpf_subprog_info *subprog;
 	struct bpf_iarray *jt;
 
 	if (env->insn_aux_data[t].jt)
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 4/4 selftests/bpf: Add tests for ld_{abs,ind} failure path in subprogs

In reply to Daniel Borkmann

Extend the verifier_ld_ind BPF selftests with subprogs containing ld_{abs,ind} and craft the test in a way where the invalid register read is rejected in the fixed case. Also add a success case each, and add additional coverage related to the BTF return type enforcement.

# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t verifier_ld_ind [...]

  #611/1   verifier_ld_ind/ld_ind: check calling conv, r1:OK
  #611/2   verifier_ld_ind/ld_ind: check calling conv, r1 @unpriv:OK
  #611/3   verifier_ld_ind/ld_ind: check calling conv, r2:OK
  #611/4   verifier_ld_ind/ld_ind: check calling conv, r2 @unpriv:OK
  #611/5   verifier_ld_ind/ld_ind: check calling conv, r3:OK
  #611/6   verifier_ld_ind/ld_ind: check calling conv, r3 @unpriv:OK
  #611/7   verifier_ld_ind/ld_ind: check calling conv, r4:OK
  #611/8   verifier_ld_ind/ld_ind: check calling conv, r4 @unpriv:OK
  #611/9   verifier_ld_ind/ld_ind: check calling conv, r5:OK
  #611/10  verifier_ld_ind/ld_ind: check calling conv, r5 @unpriv:OK
  #611/11  verifier_ld_ind/ld_ind: check calling conv, r7:OK
  #611/12  verifier_ld_ind/ld_ind: check calling conv, r7 @unpriv:OK
  #611/13  verifier_ld_ind/ld_abs: subprog early exit on ld_abs failure:OK
  #611/14  verifier_ld_ind/ld_ind: subprog early exit on ld_ind failure:OK
  #611/15  verifier_ld_ind/ld_abs: subprog with both paths safe:OK
  #611/16  verifier_ld_ind/ld_ind: subprog with both paths safe:OK
  #611/17  verifier_ld_ind/ld_abs: reject void return subprog:OK
  #611/18  verifier_ld_ind/ld_ind: reject void return subprog:OK
  #611     verifier_ld_ind:OK

Summary: 1/18 PASSED, 0 SKIPPED, 0 FAILED

---
 .../selftests/bpf/progs/verifier_ld_ind.c     | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)
tools/testing/selftests/bpf/progs/verifier_ld_ind.c +142 -0
index c925ba9a2e74..09e81b99eecb 100644
@@ -107,4 +107,146 @@ __naked void ind_check_calling_conv_r7(void)
 	: __clobber_all);
 }
 
+/*
+ * ld_{abs,ind} subprog that always sets r0=1 on the success path.
+ * bpf_gen_ld_abs() emits a hidden exit with r0=0 when the load helper
+ * fails. The verifier must model this failure return so that callers
+ * account for r0=0 as a possible return value.
+ */
+__naked __noinline __used
+static int ldabs_subprog(void)
+{
+	asm volatile (
+	"r6 = r1;"
+	".8byte %[ld_abs];"
+	"r0 = 1;"
+	"exit;"
+	:
+	: __imm_insn(ld_abs, BPF_LD_ABS(BPF_W, 0))
+	: __clobber_all);
+}
+
+__naked __noinline __used
+static int ldind_subprog(void)
+{
+	asm volatile (
+	"r6 = r1;"
+	"r7 = 0;"
+	".8byte %[ld_ind];"
+	"r0 = 1;"
+	"exit;"
+	:
+	: __imm_insn(ld_ind, BPF_LD_IND(BPF_W, BPF_REG_7, 0))
+	: __clobber_all);
+}
+
+SEC("socket")
+__description("ld_abs: subprog early exit on ld_abs failure")
+__failure __msg("R9 !read_ok")
+__naked void ld_abs_subprog_early_exit(void)
+{
+	asm volatile (
+	"call ldabs_subprog;"
+	"if r0 != 0 goto l_exit_%=;"
+	"r0 = r9;"
+	"l_exit_%=:"
+	"r0 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
+SEC("socket")
+__description("ld_ind: subprog early exit on ld_ind failure")
+__failure __msg("R9 !read_ok")
+__naked void ld_ind_subprog_early_exit(void)
+{
+	asm volatile (
+	"call ldind_subprog;"
+	"if r0 != 0 goto l_exit_%=;"
+	"r0 = r9;"
+	"l_exit_%=:"
+	"r0 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
+SEC("socket")
+__description("ld_abs: subprog with both paths safe")
+__success
+__naked void ld_abs_subprog_both_paths_safe(void)
+{
+	asm volatile (
+	"call ldabs_subprog;"
+	"r0 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
+SEC("socket")
+__description("ld_ind: subprog with both paths safe")
+__success
+__naked void ld_ind_subprog_both_paths_safe(void)
+{
+	asm volatile (
+	"call ldind_subprog;"
+	"r0 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
+/*
+ * ld_{abs,ind} in subprogs require scalar (int) return type in BTF.
+ * A test with void return must be rejected.
+ */
+__naked __noinline __used
+static void ldabs_void_subprog(void)
+{
+	asm volatile (
+	"r6 = r1;"
+	".8byte %[ld_abs];"
+	"r0 = 1;"
+	"exit;"
+	:
+	: __imm_insn(ld_abs, BPF_LD_ABS(BPF_W, 0))
+	: __clobber_all);
+}
+
+SEC("socket")
+__description("ld_abs: reject void return subprog")
+__failure __msg("LD_ABS is only allowed in functions that return 'int'")
+__naked void ld_abs_void_subprog_reject(void)
+{
+	asm volatile (
+	"call ldabs_void_subprog;"
+	"r0 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
+__naked __noinline __used
+static void ldind_void_subprog(void)
+{
+	asm volatile (
+	"r6 = r1;"
+	"r7 = 0;"
+	".8byte %[ld_ind];"
+	"r0 = 1;"
+	"exit;"
+	:
+	: __imm_insn(ld_ind, BPF_LD_IND(BPF_W, BPF_REG_7, 0))
+	: __clobber_all);
+}
+
+SEC("socket")
+__description("ld_ind: reject void return subprog")
+__failure __msg("LD_ABS is only allowed in functions that return 'int'")
+__naked void ld_ind_void_subprog_reject(void)
+{
+	asm volatile (
+	"call ldind_void_subprog;"
+	"r0 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
 char _license[] SEC("license") = "GPL";
Signature · 1 line
2.43.0