Skip to contentSkip to conversation

drm/i915/guc: WA to address the Ringbuffer coherency issue

PATCH Superseded [email protected] 4 participants 10 messages Oct 14, 2016 – Oct 26, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915/guc: WA to address the Ringbuffer coherency issue

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get commited to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.
For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.
To ensure the flush of in flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/i915/i915_guc_submission.c +6 -0
index a1f76c8..43c8a72 100644
@@ -601,6 +601,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  */
 static void i915_guc_submit(struct drm_i915_gem_request *rq)
 {
+	struct drm_i915_private *dev_priv = rq->i915;
 	unsigned int engine_id = rq->engine->id;
 	struct intel_guc *guc = &rq->i915->guc;
 	struct i915_guc_client *client = guc->execbuf_client;
@@ -608,6 +609,11 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
+
+	/* WA to flush out the pending GMADR writes to ring buffer. */
+	if (i915_vma_is_map_and_fenceable(rq->ring->vma))
+		POSTING_READ(GUC_STATUS);
+
 	b_ret = guc_ring_doorbell(client);
 
 	client->submissions[engine_id] += 1;
Signature · 6 lines
1.9.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 8 lines · On Fri, Oct 14, 2016 at 11:53:44PM +0530, [email protected] wrote:

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get commited to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

Please leave a blank line between paragraphs, or try to not leave so much whitespace at the end of a sentence.

Quoted 34 lines

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.
To ensure the flush of in flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -0
index a1f76c8..43c8a72 100644
@@ -601,6 +601,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  */
 static void i915_guc_submit(struct drm_i915_gem_request *rq)
 {
+	struct drm_i915_private *dev_priv = rq->i915;
 	unsigned int engine_id = rq->engine->id;
 	struct intel_guc *guc = &rq->i915->guc;
 	struct i915_guc_client *client = guc->execbuf_client;

drivers/gpu/drm/i915/i915_guc_submission.c static void i915_guc_submit(struct drm_i915_gem_request *rq) · line 615

Quoted 7 lines
drivers/gpu/drm/i915/i915_guc_submission.c +4 -0
@@ -608,6 +609,11 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
+
+	/* WA to flush out the pending GMADR writes to ring buffer. */
+	if (i915_vma_is_map_and_fenceable(rq->ring->vma))
+		POSTING_READ(GUC_STATUS);

Did you test POSTING_READ_FW() ?

Otherwise it makes an unfortunate amount of sense, and I feel justified in what I had to do in flush_gtt_write_domwin! :)
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw
Quoted 10 lines · Chris Wilson
Quoted 8 lines · On Fri, Oct 14, 2016 at 11:53:44PM +0530, [email protected] wrote:

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get commited to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

Quoted 3 lines

Please leave a blank line between paragraphs, or try to not leave so much whitespace at the end of a sentence.

I am sorry. Will be mindful of this from now.

Quoted 35 lines
Quoted 35 lines

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.
To ensure the flush of in flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -0
index a1f76c8..43c8a72 100644
@@ -601,6 +601,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  */
 static void i915_guc_submit(struct drm_i915_gem_request *rq)
 {
+	struct drm_i915_private *dev_priv = rq->i915;
 	unsigned int engine_id = rq->engine->id;
 	struct intel_guc *guc = &rq->i915->guc;
 	struct i915_guc_client *client = guc->execbuf_client;
@@ -608,6 +609,11 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 
Quoted 8 lines

drivers/gpu/drm/i915/i915_guc_submission.c static void i915_guc_submit(struct drm_i915_gem_request *rq) · line 615

Quoted 6 lines
drivers/gpu/drm/i915/i915_guc_submission.c +4 -0
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
+
+	/* WA to flush out the pending GMADR writes to ring buffer. */
+	if (i915_vma_is_map_and_fenceable(rq->ring->vma))
+		POSTING_READ(GUC_STATUS);

Did you test POSTING_READ_FW() ?

Sorry though we haven't explicitly tried POSTING_READ_FW() but it should work since, as per the __gen9_fw_ranges[] table, GuC registers (C000-Cxxx) do not lie in any Forcewake domain range.

Quoted 3 lines

Otherwise it makes an unfortunate amount of sense, and I feel justified in what I had to do in flush_gtt_write_domwin! :)

Yes your hunch, expectedly, was spot on :).

Best regards
Akash

Quoted 2 lines

-Chris

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

PATCH v2 1/1 drm/i915/guc: WA to address the Ringbuffer coherency issue

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get committed to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie in any forcewake domain range and so the overhead of spinlock & search in the forcewake table is avoidable. (Chris)

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/i915/i915_guc_submission.c +6 -0
index bf65ffa..74235ea 100644
@@ -634,6 +634,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  */
 static void i915_guc_submit(struct drm_i915_gem_request *rq)
 {
+	struct drm_i915_private *dev_priv = rq->i915;
 	unsigned int engine_id = rq->engine->id;
 	struct intel_guc *guc = &rq->i915->guc;
 	struct i915_guc_client *client = guc->execbuf_client;
@@ -641,6 +642,11 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
+
+	/* WA to flush out the pending GMADR writes to ring buffer. */
+	if (i915_vma_is_map_and_fenceable(rq->ring->vma))
+		POSTING_READ_FW(GUC_STATUS);
+
 	b_ret = guc_ring_doorbell(client);
 
 	client->submissions[engine_id] += 1;
Signature · 6 lines
1.9.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw
Quoted 24 lines · On Tue, Oct 25, 2016 at 10:05:23PM +0530, [email protected] wrote:

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get committed to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

Quoted 8 lines

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie in any forcewake domain range and so the overhead of spinlock & search in the forcewake table is avoidable. (Chris)

Thanks for respinning, reviewed and pushed.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw
Quoted 30 lines · Chris Wilson
Quoted 29 lines · On Tue, Oct 25, 2016 at 10:05:23PM +0530, [email protected] wrote:

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get committed to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie in any forcewake domain range and so the overhead of spinlock & search in the forcewake table is avoidable. (Chris)

Quoted 5 lines
Quoted 3 lines

Thanks for respinning, reviewed and pushed.

No CI run with GuC enabled, or even any CI run?

Regards,

Tvrtko

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw
Quoted 32 lines · Tvrtko Ursulin
Quoted 30 lines · Chris Wilson
Quoted 29 lines · On Tue, Oct 25, 2016 at 10:05:23PM +0530, [email protected] wrote:

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get committed to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie in any forcewake domain range and so the overhead of spinlock & search in the forcewake table is avoidable. (Chris)

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Thanks for respinning, reviewed and pushed.

No CI run with GuC enabled, or even any CI run?

There were on previous versions. But yes, I am that confident that this is not broken and matches the failure we have seen in BAT for other GTT vs physical access (on different machines on different paths).

The only qualm I had was the use of is_mappable() to decide if we are writing through the GTT. ring->vma->obj->stolen might be better, or a ring->ggtt_writes flag. I wanted to fix the bug first, repaint later. -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw
Quoted 37 lines · Chris Wilson
Quoted 36 lines · Tvrtko Ursulin
Quoted 34 lines · Chris Wilson
Quoted 32 lines · On Tue, Oct 25, 2016 at 10:05:23PM +0530, [email protected] wrote:

From: Akash Goel <[email protected]>

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are pinned in mappable aperture portion of GGTT and for ringbuffer pages allocated from Stolen memory, access can only be done through GMADR BAR. In case of GuC based submission, updates done in ringbuffer via GMADR may not get committed to memory by the time the Command streamer starts reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring Tail or ELSP register happens from the Host side prior to submission. Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already enforces the ordering between outstanding GMADR writes & new GTTMADR access. MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to registers within GT is contained within GT, so ordering is not enforced resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(), which takes care of GMADR writes from User space to GEM buffers, but not the ringbuffer writes from KMD.
This WA is needed on all recent HW.

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie in any forcewake domain range and so the overhead of spinlock & search in the forcewake table is avoidable. (Chris)

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

Thanks for respinning, reviewed and pushed.

No CI run with GuC enabled, or even any CI run?

There were on previous versions. But yes, I am that confident that

No with the added code exercised afaict.

Quoted 6 lines

this is not broken and matches the failure we have seen in BAT for other GTT vs physical access (on different machines on different paths).

The only qualm I had was the use of is_mappable() to decide if we are writing through the GTT. ring->vma->obj->stolen might be better, or a ring->ggtt_writes flag. I wanted to fix the bug first, repaint later.

It looks fine to me as well, and I know Akash tested it extensively.

However process and all that.

Regards,

Tvrtko

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

✗ Fi.CI.BAT: warning for drm/i915/guc: WA to address the Ringbuffer coherency issue

In reply to [email protected]
== Series Details ==

== Series Details ==

Series: drm/i915/guc: WA to address the Ringbuffer coherency issue
URL : https://patchwork.freedesktop.org/series/13807/
State : warning

== Summary ==

Series 13807v1 drm/i915/guc: WA to address the Ringbuffer coherency issue
https://patchwork.freedesktop.org/api/1.0/series/13807/revisions/1/mbox/

Test drv_module_reload_basic:

                pass       -> SKIP       (fi-bdw-5557u)
Test kms_flip:
        Subgroup basic-flip-vs-wf_vblank:
                dmesg-warn -> PASS       (fi-skl-6700k)
                dmesg-warn -> PASS       (fi-skl-6770hq)
Test kms_pipe_crc_basic:
        Subgroup read-crc-pipe-a-frame-sequence:
                dmesg-warn -> PASS       (fi-ilk-650)
        Subgroup read-crc-pipe-b:
                dmesg-warn -> PASS       (fi-ilk-650)
        Subgroup suspend-read-crc-pipe-c:
                incomplete -> PASS       (fi-skl-6700k)
Test vgem_basic:
        Subgroup unload:
                skip       -> PASS       (fi-skl-6770hq)
                pass       -> SKIP       (fi-hsw-4770)
fi-bdw-5557u     total:246  pass:230  dwarn:0   dfail:0   fail:0   skip:16 
fi-bsw-n3050     total:246  pass:204  dwarn:0   dfail:0   fail:0   skip:42 
fi-bxt-t5700     total:246  pass:216  dwarn:0   dfail:0   fail:0   skip:30 
fi-byt-n2820     total:246  pass:210  dwarn:0   dfail:0   fail:1   skip:35 
fi-hsw-4770      total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-hsw-4770r     total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
fi-ilk-650       total:246  pass:184  dwarn:0   dfail:0   fail:2   skip:60 
fi-ivb-3520m     total:246  pass:221  dwarn:0   dfail:0   fail:0   skip:25 
fi-ivb-3770      total:246  pass:221  dwarn:0   dfail:0   fail:0   skip:25 
fi-kbl-7200u     total:246  pass:222  dwarn:0   dfail:0   fail:0   skip:24 
fi-skl-6260u     total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-skl-6700hq    total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-skl-6700k     total:246  pass:221  dwarn:1   dfail:0   fail:0   skip:24 
fi-skl-6770hq    total:246  pass:230  dwarn:1   dfail:0   fail:1   skip:14 
fi-snb-2520m     total:246  pass:210  dwarn:0   dfail:0   fail:0   skip:36 
fi-snb-2600      total:246  pass:209  dwarn:0   dfail:0   fail:0   skip:37 

fi-byt-j1900 failed to connect after reboot

Results at /archive/results/CI_IGT_test/Patchwork_2728/

38ecbe9082e477953fe165265c76e6c6061aeaf6 drm-intel-nightly: 2016y-10m-14d-16h-23m-48s UTC integration manifest 86dd25f drm/i915/guc: WA to address the Ringbuffer coherency issue

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

✗ Fi.CI.BAT: warning for drm/i915/guc: WA to address the Ringbuffer coherency issue (rev2)

In reply to [email protected]
== Series Details ==

== Series Details ==

Series: drm/i915/guc: WA to address the Ringbuffer coherency issue (rev2)
URL : https://patchwork.freedesktop.org/series/13807/
State : warning

== Summary ==

Series 13807v2 drm/i915/guc: WA to address the Ringbuffer coherency issue
https://patchwork.freedesktop.org/api/1.0/series/13807/revisions/2/mbox/

Test drv_module_reload_basic:

                pass       -> DMESG-WARN (fi-skl-6700hq)
                dmesg-warn -> PASS       (fi-skl-6770hq)
Test gem_exec_suspend:
        Subgroup basic-s3:
                dmesg-warn -> PASS       (fi-skl-6700hq)
                dmesg-warn -> PASS       (fi-skl-6770hq)
Test kms_frontbuffer_tracking:
        Subgroup basic:
                fail       -> PASS       (fi-skl-6770hq)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-a:
                dmesg-warn -> PASS       (fi-skl-6700hq)
                pass       -> DMESG-WARN (fi-ilk-650)
        Subgroup suspend-read-crc-pipe-b:
                dmesg-warn -> PASS       (fi-skl-6700hq)
        Subgroup suspend-read-crc-pipe-c:
                dmesg-warn -> PASS       (fi-skl-6700hq)
fi-bdw-5557u     total:246  pass:231  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:246  pass:204  dwarn:0   dfail:0   fail:0   skip:42 
fi-bxt-t5700     total:246  pass:216  dwarn:0   dfail:0   fail:0   skip:30 
fi-byt-j1900     total:246  pass:215  dwarn:0   dfail:0   fail:0   skip:31 
fi-byt-n2820     total:246  pass:211  dwarn:0   dfail:0   fail:0   skip:35 
fi-hsw-4770      total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
fi-hsw-4770r     total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-ilk-650       total:246  pass:184  dwarn:1   dfail:0   fail:0   skip:61 
fi-ivb-3520m     total:246  pass:220  dwarn:0   dfail:0   fail:0   skip:26 
fi-ivb-3770      total:246  pass:220  dwarn:0   dfail:0   fail:0   skip:26 
fi-kbl-7200u     total:246  pass:222  dwarn:0   dfail:0   fail:0   skip:24 
fi-skl-6260u     total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-skl-6700hq    total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
fi-skl-6700k     total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
fi-skl-6770hq    total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-snb-2520m     total:246  pass:209  dwarn:0   dfail:0   fail:0   skip:37 
fi-snb-2600      total:246  pass:208  dwarn:0   dfail:0   fail:0   skip:38 

3ce99d02d8f2b7d1414d20d5972f8e277b33693e drm-intel-nightly: 2016y-10m-25d-13h-55m-46s UTC integration manifest c503679 drm/i915/guc: WA to address the Ringbuffer coherency issue

Full results at https://intel-gfx-ci.01.org/CI/Patchwork_2814/

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2814/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx