Skip to contentSkip to conversation

hw/scsi: Add SCSI tape device emulation

PATCH In review rft0 2 participants 5 messages Apr 16 – Apr 17 1 message not in the archive Arm/Amlogic Meson SoC support

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): aeEicSrfbE2sZo8w

rft0

author
#1 lore raw

PATCH v2 1/1 hw/scsi: Add SCSI tape device emulation

Add initial emulation of SCSI tape device supporting basic INQUIRY operation for now.

---
Second patch:
- Add kconfig entry
- Validate vendor, product, version, serial lengths

 hw/scsi/Kconfig     |   5 +
 hw/scsi/meson.build |   1 +
 hw/scsi/scsi-tape.c | 349 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 hw/scsi/scsi-tape.c
hw/scsi/Kconfig +5 -0
index 5743ee9b4d..06e7cab178 100644
@@ -1,6 +1,11 @@
 config SCSI
     bool
 
+config SCSI_TAPE
+    bool
+    default y
+    depends on SCSI
+
 config LSI_SCSI_PCI
     bool
     default y if PCI_DEVICES
hw/scsi/meson.build +1 -0
index 69fde0cf84..1c62115d8e 100644
@@ -8,6 +8,7 @@ scsi_ss.add(files(
   'scsi-disk.c',
   'scsi-generic.c',
 ))
+scsi_ss.add(when: 'CONFIG_SCSI_TAPE', if_true: files('scsi-tape.c'))
 scsi_ss.add(when: 'CONFIG_ESP', if_true: files('esp.c'))
 scsi_ss.add(when: 'CONFIG_ESP_PCI', if_true: files('esp-pci.c'))
 scsi_ss.add(when: 'CONFIG_LSI_SCSI_PCI', if_true: files('lsi53c895a.c'))
hw/scsi/scsi-tape.c new file +349 -0

349 lines not on this page · raw message

Signature · 1 line
2.47.3
author
#2 lore raw

this is continuation of
https://lore.kernel.org/qemu-devel/[email protected]/T/#t

Quoted 402 lines · On Thu, Apr 16, 2026 at 9:36 PM rft0 <[email protected]> wrote:

Add initial emulation of SCSI tape device supporting basic INQUIRY operation for now.

---
Second patch:
- Add kconfig entry
- Validate vendor, product, version, serial lengths

 hw/scsi/Kconfig     |   5 +
 hw/scsi/meson.build |   1 +
 hw/scsi/scsi-tape.c | 349 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 hw/scsi/scsi-tape.c
hw/scsi/Kconfig +5 -0
index 5743ee9b4d..06e7cab178 100644
@@ -1,6 +1,11 @@
 config SCSI
     bool
 
+config SCSI_TAPE
+    bool
+    default y
+    depends on SCSI
+
 config LSI_SCSI_PCI
     bool
     default y if PCI_DEVICES
hw/scsi/meson.build +1 -0
index 69fde0cf84..1c62115d8e 100644
@@ -8,6 +8,7 @@ scsi_ss.add(files(
   'scsi-disk.c',
   'scsi-generic.c',
 ))
+scsi_ss.add(when: 'CONFIG_SCSI_TAPE', if_true: files('scsi-tape.c'))
 scsi_ss.add(when: 'CONFIG_ESP', if_true: files('esp.c'))
 scsi_ss.add(when: 'CONFIG_ESP_PCI', if_true: files('esp-pci.c'))
 scsi_ss.add(when: 'CONFIG_LSI_SCSI_PCI', if_true: files('lsi53c895a.c'))
hw/scsi/scsi-tape.c new file +349 -1
new file mode 100644
index 0000000000..adbae9b4ad
@@ -0,0 +1,349 @@
+/*
+ * SCSI Tape Device emulation
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Written by Rafet Taskin <[email protected]>
+ *
+ * SCSI Tape device emulation.
+ *
+ */
+
+#include "qemu/hw-version.h"
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+#include "qemu/memalign.h"
+#include "qemu/cutils.h"
+#include "hw/scsi/scsi.h"
+#include "scsi/constants.h"
+#include "system/block-backend.h"
+#include "hw/block/block.h"
+#include "hw/core/qdev-properties.h"
+#include "hw/core/qdev-properties-system.h"
+#include "qom/object.h"
+
+#define SCSI_MAX_INQUIRY_LEN    256
+
+#define MAX_SERIAL_LEN 36
+
+#define TYPE_SCSI_TAPE "scsi-tape"
+
+OBJECT_DECLARE_SIMPLE_TYPE(SCSITapeState, SCSI_TAPE)
+
+typedef struct SCSITapeReq {
+    SCSIRequest req;
+
+    uint32_t buflen;
+    struct iovec iov;
+
+    QEMUIOVector qiov;
+} SCSITapeReq;
+
+struct SCSITapeState {
+    SCSIDevice qdev;
+
+    char *vendor;
+    char *product;
+    char *version;
+    char *serial;
+};
+
+static void scsi_free_request(SCSIRequest *req)
+{
+    SCSITapeReq *r = DO_UPCAST(SCSITapeReq, req, req);
+
+    qemu_vfree(r->iov.iov_base);
+}
+
+static uint8_t *scsi_get_buf(SCSIRequest *req)
+{
+    SCSITapeReq *r = DO_UPCAST(SCSITapeReq, req, req);
+
+    return (uint8_t *)r->iov.iov_base;
+}
+
+static void scsi_init_iovec(SCSITapeReq *r, size_t size)
+{
+    if (!r->iov.iov_base) {
+        r->buflen = size;
+        r->iov.iov_base = qemu_memalign(qemu_real_host_page_size(), size);
+    }
+
+    r->iov.iov_len = size;
+    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+}
+
+static void scsi_check_condition(SCSITapeReq *r, SCSISense sense)
+{
+    scsi_req_build_sense(&r->req, sense);
+    scsi_req_complete(&r->req, CHECK_CONDITION);
+}
+
+static int scsi_disk_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, req->dev);
+    uint8_t page_code = req->cmd.buf[2];
+
+    outbuf[0] = TYPE_TAPE;
+    outbuf[1] = page_code;
+    outbuf[2] = 0x00;
+    outbuf[3] = 0x00;
+
+    switch (page_code) {
+    case 0x00: /* Supported VPD pages */
+        outbuf[4] = 0x00;   /* page 0x00 (this page) */
+        if (s->serial) {
+            outbuf[5] = 0x80;   /* page 0x80 (serial number) */
+            outbuf[3] = 2;      /* page data length */
+            return 6;
+        }
+        outbuf[3] = 1;
+        return 5;
+
+    case 0x80: /* Unit Serial Number */
+        if (!s->serial) {
+            return -1;   /* not supported, caller sends INVALID_FIELD */
+        }
+        {
+            int l = strlen(s->serial);
+            outbuf[3] = l;
+            memcpy(&outbuf[4], s->serial, l);
+            return 4 + l;
+        }
+
+    default:
+        return -1;  /* unsupported VPD page */
+    }
+}
+
+static int scsi_tape_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, req->dev);
+    int buflen;
+
+    if (req->cmd.buf[1] & 0x1) {
+        return scsi_disk_emulate_vpd_page(req, outbuf);
+    }
+
+    /* Standard INQUIRY, not a VPD request */
+    if (req->cmd.buf[2] != 0) {
+        return -1;
+    }
+
+    /* PAGE_CODE == 0 */
+    buflen = req->cmd.xfer;
+    if (buflen > SCSI_MAX_INQUIRY_LEN) {
+        buflen = SCSI_MAX_INQUIRY_LEN;
+    }
+
+    outbuf[0] = TYPE_TAPE;      /* 0x01 = Tape */
+    outbuf[1] = 0x80;           /* Always removable */
+    outbuf[2] = 0x05;           /* SPC-3 */
+    outbuf[3] = 0x02 | 0x10;    /* Format 2, HiSup */
+
+    if (buflen > 36) {
+        outbuf[4] = buflen - 5;
+    } else {
+        outbuf[4] = 36 - 5;
+    }
+
+    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
+
+    strpadcpy((char *)&outbuf[16], 16, s->product, ' ');
+    strpadcpy((char *)&outbuf[8], 8, s->vendor, ' ');
+
+    memset(&outbuf[32], 0, 4);
+    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
+
+    return buflen;
+}
+
+/*
+ * > 0 - number of bytes from device to host
+ * < 0 - number of bytes from host to device
+ * = 0 - no data transfer, already completed
+ */
+static int32_t scsi_tape_emulate_command(SCSIRequest *req, uint8_t *buf)
+{
+    SCSITapeReq *r = DO_UPCAST(SCSITapeReq, req, req);
+    uint8_t *outbuf;
+    int32_t len = 0;
+    uint8_t command = buf[0];
+
+    if (req->cmd.xfer > 65536) {
+        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+        return 0;
+    }
+    r->buflen = MAX(4096, req->cmd.xfer);
+    scsi_init_iovec(r, r->buflen);
+
+    outbuf = r->iov.iov_base;
+    memset(outbuf, 0, r->buflen);
+
+    switch (command) {
+    case INQUIRY:
+        len = scsi_tape_emulate_inquiry(req, outbuf);
+        if (len < 0) {
+            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+            return 0;
+        }
+        break;
+
+    case TEST_UNIT_READY:
+        if (!blk_is_available(req->dev->conf.blk)) {
+            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+            return 0;
+        }
+
+        /* TODO: check if tape is really ready */
+        scsi_req_complete(&r->req, GOOD);
+        return 0;
+    case REQUEST_SENSE:
+        /* TODO: returning NO SENSE for now handle it later. */
+        /* 0x0: 0x70 = current errors, fixed format */
+        /* 0x2: sense key (0x00 = NO SENSE) */
+        /* 0x7: additional sense length */
+        {
+            int sense_len = MIN(buf[4], 18);
+            memset(outbuf, 0, sense_len);
+            outbuf[0] = 0x70;
+            outbuf[2] = 0x00;
+            outbuf[7] = 10;
+            len = sense_len;
+        }
+        break;
+
+    case REWIND:
+        if (!blk_is_available(req->dev->conf.blk)) {
+            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+            return 0;
+        }
+
+        /* TODO: reset tape position to beginning of SIMH image */
+        scsi_req_complete(&r->req, GOOD);
+        return 0;
+
+    /* Add rest later */
+    default:
+        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+        return 0;
+    }
+
+    r->iov.iov_len = len;
+    return len;
+}
+
+
+/* TODO */
+static void scsi_tape_emulate_read_data(SCSIRequest *req)
+{
+    SCSITapeReq *r = DO_UPCAST(SCSITapeReq, req, req);
+    int buflen = r->iov.iov_len;
+
+    if (buflen) {
+        r->iov.iov_len = 0;
+        scsi_req_data(&r->req, buflen);
+        return;
+    }
+
+    scsi_req_complete(&r->req, GOOD);
+}
+
+/* TODO: not implemented yet */
+static void scsi_tape_emulate_write_data(SCSIRequest *req)
+{
+    scsi_req_complete(req, GOOD);
+}
+
+static const SCSIReqOps scsi_tape_reqops = {
+    .size         = sizeof(SCSITapeReq),
+    .free_req     = scsi_free_request,
+    .send_command = scsi_tape_emulate_command,
+    .read_data    = scsi_tape_emulate_read_data,
+    .write_data   = scsi_tape_emulate_write_data,
+    .get_buf      = scsi_get_buf,
+};
+
+static SCSIRequest *scsi_tape_new_request(SCSIDevice *d, uint32_t tag,
+                                          uint32_t lun, uint8_t *buf,
+                                          void *hba_private)
+{
+    return scsi_req_alloc(&scsi_tape_reqops, d, tag, lun, hba_private);
+}
+
+static void scsi_tape_realize(SCSIDevice *dev, Error **errp)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, dev);
+
+    dev->type = TYPE_TAPE;
+
+    if (!s->qdev.conf.blk) {
+        error_setg(errp, "Drive property not set");
+        return;
+    }
+
+    if (!blk_is_inserted(s->qdev.conf.blk)) {
+        error_setg(errp, "Device needs media, but drive is empty");
+        return;
+    }
+
+    if (!s->vendor) {
+        s->vendor = g_strdup("QEMU");
+    } else if (strlen(s->vendor) > 8) {
+        error_setg(errp, "Vendor must be 8 characters at most");
+        return;
+    }
+
+    if (!s->product) {
+        s->product = g_strdup("QEMU TAPE");
+    } else if (strlen(s->product) > 16) {
+        error_setg(errp, "Product must be 16 characters at most");
+        return;
+    }
+
+    if (!s->version) {
+        s->version = g_strdup(QEMU_HW_VERSION);
+    } else if (strlen(s->version) > 4) {
+        error_setg(errp, "Version must be 4 characters at most");
+        return;
+    }
+
+    if (s->serial && strlen(s->serial) > 36) {
+        error_setg(errp, "Serial must be 36 characters at most");
+        return;
+    }
+}
+
+static Property scsi_tape_properties[] = {
+    DEFINE_PROP_DRIVE("drive", SCSITapeState, qdev.conf.blk),
+    DEFINE_PROP_STRING("vendor", SCSITapeState, vendor),
+    DEFINE_PROP_STRING("product", SCSITapeState, product),
+    DEFINE_PROP_STRING("ver", SCSITapeState, version),
+    DEFINE_PROP_STRING("serial", SCSITapeState, serial),
+};
+
+static void scsi_tape_class_initfn(ObjectClass *klass, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
+
+    sc->realize   = scsi_tape_realize;
+    sc->alloc_req = scsi_tape_new_request;
+    dc->desc      = "SCSI Tape";
+    device_class_set_props(dc, scsi_tape_properties);
+}
+
+static const TypeInfo scsi_tape_info = {
+    .name          = TYPE_SCSI_TAPE,
+    .parent        = TYPE_SCSI_DEVICE,
+    .instance_size = sizeof(SCSITapeState),
+    .class_init    = scsi_tape_class_initfn,
+};
+
+static void scsi_tape_register_types(void)
+{
+    type_register_static(&scsi_tape_info);
+}
+
+type_init(scsi_tape_register_types)
--

2.47.3

#3 lore raw
In reply to rft0
Quoted 67 lines · On Thu, Apr 16, 2026 at 09:35:40PM +0300, rft0 wrote:

Add initial emulation of SCSI tape device supporting basic INQUIRY operation for now.

---
Second patch:
- Add kconfig entry
- Validate vendor, product, version, serial lengths

 hw/scsi/Kconfig     |   5 +
 hw/scsi/meson.build |   1 +
 hw/scsi/scsi-tape.c | 349 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 hw/scsi/scsi-tape.c
hw/scsi/Kconfig +5 -0
index 5743ee9b4d..06e7cab178 100644
@@ -1,6 +1,11 @@
 config SCSI
     bool
 
+config SCSI_TAPE
+    bool
+    default y
+    depends on SCSI
+
 config LSI_SCSI_PCI
     bool
     default y if PCI_DEVICES
hw/scsi/meson.build +1 -0
index 69fde0cf84..1c62115d8e 100644
@@ -8,6 +8,7 @@ scsi_ss.add(files(
   'scsi-disk.c',
   'scsi-generic.c',
 ))
+scsi_ss.add(when: 'CONFIG_SCSI_TAPE', if_true: files('scsi-tape.c'))
 scsi_ss.add(when: 'CONFIG_ESP', if_true: files('esp.c'))
 scsi_ss.add(when: 'CONFIG_ESP_PCI', if_true: files('esp-pci.c'))
 scsi_ss.add(when: 'CONFIG_LSI_SCSI_PCI', if_true: files('lsi53c895a.c'))
hw/scsi/scsi-tape.c new file +18 -0
new file mode 100644
index 0000000000..adbae9b4ad
@@ -0,0 +1,349 @@
+/*
+ * SCSI Tape Device emulation
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Written by Rafet Taskin <[email protected]>
+ *
+ * SCSI Tape device emulation.
+ *
+ */
+
+#include "qemu/hw-version.h"
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+#include "qemu/memalign.h"
+#include "qemu/cutils.h"
+#include "hw/scsi/scsi.h"

hw/scsi/scsi-tape.c line 28

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+#include "scsi/constants.h"
+#include "system/block-backend.h"
+#include "hw/block/block.h"
+#include "hw/core/qdev-properties.h"
+#include "hw/core/qdev-properties-system.h"
+#include "qom/object.h"
+
+#define SCSI_MAX_INQUIRY_LEN    256
+
+#define MAX_SERIAL_LEN 36

This doesn't appear to be used - the value is just hardcoded at time of use. Can we use that, and also add constants for the max product, vendor and version fields, since those magic constants are used several times over

Quoted 19 lines
hw/scsi/scsi-tape.c new file +19 -0
+static int scsi_disk_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, req->dev);
+    uint8_t page_code = req->cmd.buf[2];
+
+    outbuf[0] = TYPE_TAPE;
+    outbuf[1] = page_code;
+    outbuf[2] = 0x00;
+    outbuf[3] = 0x00;
+
+    switch (page_code) {
+    case 0x00: /* Supported VPD pages */
+        outbuf[4] = 0x00;   /* page 0x00 (this page) */
+        if (s->serial) {
+            outbuf[5] = 0x80;   /* page 0x80 (serial number) */
+            outbuf[3] = 2;      /* page data length */
+            return 6;
+        }
+        outbuf[3] = 1;

hw/scsi/scsi-tape.c line 111

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+        return 5;
+
+    case 0x80: /* Unit Serial Number */
+        if (!s->serial) {
+            return -1;   /* not supported, caller sends INVALID_FIELD */
+        }
+        {
+            int l = strlen(s->serial);
+            outbuf[3] = l;
+            memcpy(&outbuf[4], s->serial, l);

strpadcpy is probably a better idea, as this leaves the tail of the buffer uninitialized and does not include a NUL terminator. Even if the caller has initialized the buffer with nuls, it is more reassuring to reviewers if we explicitly pad here.

Use MAX_SERIAL_LEN here too with strpadcpy

Quoted 33 lines
hw/scsi/scsi-tape.c new file +33 -0
+            return 4 + l;
+        }
+
+    default:
+        return -1;  /* unsupported VPD page */
+    }
+}
+
+static int scsi_tape_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, req->dev);
+    int buflen;
+
+    if (req->cmd.buf[1] & 0x1) {
+        return scsi_disk_emulate_vpd_page(req, outbuf);
+    }
+
+    /* Standard INQUIRY, not a VPD request */
+    if (req->cmd.buf[2] != 0) {
+        return -1;
+    }
+
+    /* PAGE_CODE == 0 */
+    buflen = req->cmd.xfer;
+    if (buflen > SCSI_MAX_INQUIRY_LEN) {
+        buflen = SCSI_MAX_INQUIRY_LEN;
+    }
+
+    outbuf[0] = TYPE_TAPE;      /* 0x01 = Tape */
+    outbuf[1] = 0x80;           /* Always removable */
+    outbuf[2] = 0x05;           /* SPC-3 */
+    outbuf[3] = 0x02 | 0x10;    /* Format 2, HiSup */
+

hw/scsi/scsi-tape.c line 154

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+    if (buflen > 36) {
+        outbuf[4] = buflen - 5;
+    } else {
+        outbuf[4] = 36 - 5;
+    }
+
+    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
+
+    strpadcpy((char *)&outbuf[16], 16, s->product, ' ');
+    strpadcpy((char *)&outbuf[8], 8, s->vendor, ' ');

The 2nd arg here can use MAX_VENDOR_LEN / MAX_PRODUCT_LEN

hw/scsi/scsi-tape.c line 157

Quoted 3 lines
hw/scsi/scsi-tape.c new file +3 -0
+
+    memset(&outbuf[32], 0, 4);
+    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));

Why not use strpadcpy like the two lines above. Also MAX_VERSION_LEN constant would be wise.

Quoted 16 lines
hw/scsi/scsi-tape.c new file +15 -0
+
+    return buflen;
+}
 
+static void scsi_tape_realize(SCSIDevice *dev, Error **errp)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, dev);
+
+    dev->type = TYPE_TAPE;
+
+    if (!s->qdev.conf.blk) {
+        error_setg(errp, "Drive property not set");
+        return;
+    }
+
+    if (!blk_is_inserted(s->qdev.conf.blk)) {

hw/scsi/scsi-tape.c line 296

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+        error_setg(errp, "Device needs media, but drive is empty");
+        return;
+    }
+
+    if (!s->vendor) {
+        s->vendor = g_strdup("QEMU");
+    } else if (strlen(s->vendor) > 8) {
+        error_setg(errp, "Vendor must be 8 characters at most");
+        return;
+    }

Get rid of the "else" here and in the checks below - we want to sanity check that the static constant is not oversized too, especially for QEMU_HW_VERSION. Also use the constants for max length and include the string in the error message . IOW more like this code:

    if (!s->vendor) {
        s->vendor = g_strdup("QEMU");
    }
    if (strlen(s->vendor) > MAX_VENDOR_LEN) {
        error_setg(errp, "Vendor '%s' must be %d characters at most",
	           s->vendor, MAX_VENDOR_LEN);
        return;
    }
Quoted 9 lines
hw/scsi/scsi-tape.c new file +9 -0
+    if (!s->product) {
+        s->product = g_strdup("QEMU TAPE");
+    } else if (strlen(s->product) > 16) {
+        error_setg(errp, "Product must be 16 characters at most");
+        return;
+    }
+
+    if (!s->version) {
+        s->version = g_strdup(QEMU_HW_VERSION);

hw/scsi/scsi-tape.c line 316

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+    } else if (strlen(s->version) > 4) {
+        error_setg(errp, "Version must be 4 characters at most");
+        return;
+    }
+
+    if (s->serial && strlen(s->serial) > 36) {
+        error_setg(errp, "Serial must be 36 characters at most");
+        return;
+    }
+}

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com       ~~        https://hachyderm.io/@berrange :|
|: https://libvirt.org          ~~          https://entangle-photo.org :|
|: https://pixelfed.art/berrange   ~~    https://fstop138.berrange.com :|
author
#4 lore raw

Hello Daniel,

I would like to continue but Helge said only choosen applicant should work on this. (
https://lore.kernel.org/qemu-devel/[email protected]/T/#t)

With regards,
Rafet

Quoted 249 lines · On Fri, Apr 17, 2026, 12:57 Daniel P. Berrangé <[email protected]> wrote:
Quoted 67 lines · On Thu, Apr 16, 2026 at 09:35:40PM +0300, rft0 wrote:

Add initial emulation of SCSI tape device supporting basic INQUIRY operation for now.

---
Second patch:
- Add kconfig entry
- Validate vendor, product, version, serial lengths

 hw/scsi/Kconfig     |   5 +
 hw/scsi/meson.build |   1 +
 hw/scsi/scsi-tape.c | 349 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 hw/scsi/scsi-tape.c
hw/scsi/Kconfig +5 -0
index 5743ee9b4d..06e7cab178 100644
@@ -1,6 +1,11 @@
 config SCSI
     bool
 
+config SCSI_TAPE
+    bool
+    default y
+    depends on SCSI
+
 config LSI_SCSI_PCI
     bool
     default y if PCI_DEVICES
hw/scsi/meson.build +1 -0
index 69fde0cf84..1c62115d8e 100644
@@ -8,6 +8,7 @@ scsi_ss.add(files(
   'scsi-disk.c',
   'scsi-generic.c',
 ))
+scsi_ss.add(when: 'CONFIG_SCSI_TAPE', if_true: files('scsi-tape.c'))
 scsi_ss.add(when: 'CONFIG_ESP', if_true: files('esp.c'))
 scsi_ss.add(when: 'CONFIG_ESP_PCI', if_true: files('esp-pci.c'))
 scsi_ss.add(when: 'CONFIG_LSI_SCSI_PCI', if_true: files('lsi53c895a.c'))
hw/scsi/scsi-tape.c new file +18 -0
new file mode 100644
index 0000000000..adbae9b4ad
@@ -0,0 +1,349 @@
+/*
+ * SCSI Tape Device emulation
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Written by Rafet Taskin <[email protected]>
+ *
+ * SCSI Tape device emulation.
+ *
+ */
+
+#include "qemu/hw-version.h"
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+#include "qemu/memalign.h"
+#include "qemu/cutils.h"
+#include "hw/scsi/scsi.h"

hw/scsi/scsi-tape.c line 28

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+#include "scsi/constants.h"
+#include "system/block-backend.h"
+#include "hw/block/block.h"
+#include "hw/core/qdev-properties.h"
+#include "hw/core/qdev-properties-system.h"
+#include "qom/object.h"
+
+#define SCSI_MAX_INQUIRY_LEN    256
+
+#define MAX_SERIAL_LEN 36

This doesn't appear to be used - the value is just hardcoded at time of use. Can we use that, and also add constants for the max product, vendor and version fields, since those magic constants are used several times over

Quoted 19 lines
hw/scsi/scsi-tape.c new file +19 -0
+static int scsi_disk_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, req->dev);
+    uint8_t page_code = req->cmd.buf[2];
+
+    outbuf[0] = TYPE_TAPE;
+    outbuf[1] = page_code;
+    outbuf[2] = 0x00;
+    outbuf[3] = 0x00;
+
+    switch (page_code) {
+    case 0x00: /* Supported VPD pages */
+        outbuf[4] = 0x00;   /* page 0x00 (this page) */
+        if (s->serial) {
+            outbuf[5] = 0x80;   /* page 0x80 (serial number) */
+            outbuf[3] = 2;      /* page data length */
+            return 6;
+        }
+        outbuf[3] = 1;

hw/scsi/scsi-tape.c line 111

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+        return 5;
+
+    case 0x80: /* Unit Serial Number */
+        if (!s->serial) {
+            return -1;   /* not supported, caller sends INVALID_FIELD */
+        }
+        {
+            int l = strlen(s->serial);
+            outbuf[3] = l;
+            memcpy(&outbuf[4], s->serial, l);

strpadcpy is probably a better idea, as this leaves the tail of the buffer uninitialized and does not include a NUL terminator. Even if the caller has initialized the buffer with nuls, it is more reassuring to reviewers if we explicitly pad here.

Use MAX_SERIAL_LEN here too with strpadcpy

Quoted 33 lines
hw/scsi/scsi-tape.c new file +33 -0
+            return 4 + l;
+        }
+
+    default:
+        return -1;  /* unsupported VPD page */
+    }
+}
+
+static int scsi_tape_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, req->dev);
+    int buflen;
+
+    if (req->cmd.buf[1] & 0x1) {
+        return scsi_disk_emulate_vpd_page(req, outbuf);
+    }
+
+    /* Standard INQUIRY, not a VPD request */
+    if (req->cmd.buf[2] != 0) {
+        return -1;
+    }
+
+    /* PAGE_CODE == 0 */
+    buflen = req->cmd.xfer;
+    if (buflen > SCSI_MAX_INQUIRY_LEN) {
+        buflen = SCSI_MAX_INQUIRY_LEN;
+    }
+
+    outbuf[0] = TYPE_TAPE;      /* 0x01 = Tape */
+    outbuf[1] = 0x80;           /* Always removable */
+    outbuf[2] = 0x05;           /* SPC-3 */
+    outbuf[3] = 0x02 | 0x10;    /* Format 2, HiSup */
+

hw/scsi/scsi-tape.c line 154

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+    if (buflen > 36) {
+        outbuf[4] = buflen - 5;
+    } else {
+        outbuf[4] = 36 - 5;
+    }
+
+    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
+
+    strpadcpy((char *)&outbuf[16], 16, s->product, ' ');
+    strpadcpy((char *)&outbuf[8], 8, s->vendor, ' ');

The 2nd arg here can use MAX_VENDOR_LEN / MAX_PRODUCT_LEN

hw/scsi/scsi-tape.c line 157

Quoted 3 lines
hw/scsi/scsi-tape.c new file +3 -0
+
+    memset(&outbuf[32], 0, 4);
+    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));

Why not use strpadcpy like the two lines above. Also MAX_VERSION_LEN constant would be wise.

Quoted 16 lines
hw/scsi/scsi-tape.c new file +15 -0
+
+    return buflen;
+}
 
+static void scsi_tape_realize(SCSIDevice *dev, Error **errp)
+{
+    SCSITapeState *s = DO_UPCAST(SCSITapeState, qdev, dev);
+
+    dev->type = TYPE_TAPE;
+
+    if (!s->qdev.conf.blk) {
+        error_setg(errp, "Drive property not set");
+        return;
+    }
+
+    if (!blk_is_inserted(s->qdev.conf.blk)) {

hw/scsi/scsi-tape.c line 296

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+        error_setg(errp, "Device needs media, but drive is empty");
+        return;
+    }
+
+    if (!s->vendor) {
+        s->vendor = g_strdup("QEMU");
+    } else if (strlen(s->vendor) > 8) {
+        error_setg(errp, "Vendor must be 8 characters at most");
+        return;
+    }

Get rid of the "else" here and in the checks below - we want to sanity check that the static constant is not oversized too, especially for QEMU_HW_VERSION. Also use the constants for max length and include the string in the error message . IOW more like this code:

    if (!s->vendor) {
        s->vendor = g_strdup("QEMU");
    }
    if (strlen(s->vendor) > MAX_VENDOR_LEN) {
        error_setg(errp, "Vendor '%s' must be %d characters at most",
                   s->vendor, MAX_VENDOR_LEN);
        return;
    }
Quoted 9 lines
hw/scsi/scsi-tape.c new file +9 -0
+    if (!s->product) {
+        s->product = g_strdup("QEMU TAPE");
+    } else if (strlen(s->product) > 16) {
+        error_setg(errp, "Product must be 16 characters at most");
+        return;
+    }
+
+    if (!s->version) {
+        s->version = g_strdup(QEMU_HW_VERSION);

hw/scsi/scsi-tape.c line 316

Quoted 10 lines
hw/scsi/scsi-tape.c new file +10 -0
+    } else if (strlen(s->version) > 4) {
+        error_setg(errp, "Version must be 4 characters at most");
+        return;
+    }
+
+    if (s->serial && strlen(s->serial) > 36) {
+        error_setg(errp, "Serial must be 36 characters at most");
+        return;
+    }
+}

With regards,
Daniel
--

|: https://berrange.com       ~~        https://hachyderm.io/@berrange :|
|: https://libvirt.org          ~~          https://entangle-photo.org :|
|: https://pixelfed.art/berrange   ~~    https://fstop138.berrange.com :|
#5 lore raw
Quoted 5 lines · Rafet T

Hello Daniel,

I would like to continue but Helge said only choosen applicant should work on this. (
https://lore.kernel.org/qemu-devel/[email protected]/T/#t)

Sorry, I missed that other message. Please follow Helge's request.

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com       ~~        https://hachyderm.io/@berrange :|
|: https://libvirt.org          ~~          https://entangle-photo.org :|
|: https://pixelfed.art/berrange   ~~    https://fstop138.berrange.com :|