memory: tegra30-emc: Print additional memory info
Subsystems (2)
PATCH 1/1 memory: tegra30-emc: Print additional memory info
Print out memory type and LPDDR2 configuration on Tegra30, making it similar to the memory info printed by the Tegra20 memory driver. This info is useful for debugging purposes.
--- drivers/memory/tegra/Kconfig | 1 + drivers/memory/tegra/tegra30-emc.c | 131 ++++++++++++++++++++++++++--- 2 files changed, 122 insertions(+), 10 deletions(-)
drivers/memory/tegra/Kconfig +1 -0
@@ -28,6 +28,7 @@ config TEGRA30_EMC default y depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST select PM_OPP + select DDR help This driver is for the External Memory Controller (EMC) found on Tegra30 chips. The EMC controls the external DRAM on the board.
drivers/memory/tegra/tegra30-emc.c +121 -10
205 lines not on this page · raw message
Signature · 1 line
2.33.1
Quoted 155 lines · Dmitry Osipenko
Print out memory type and LPDDR2 configuration on Tegra30, making it similar to the memory info printed by the Tegra20 memory driver. This info is useful for debugging purposes.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/memory/tegra/Kconfig | 1 + drivers/memory/tegra/tegra30-emc.c | 131 ++++++++++++++++++++++++++--- 2 files changed, 122 insertions(+), 10 deletions(-)drivers/memory/tegra/Kconfig +1
-0@@ -28,6 +28,7 @@ config TEGRA30_EMC default y depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST select PM_OPP + select DDR help This driver is for the External Memory Controller (EMC) found on Tegra30 chips. The EMC controls the external DRAM on the board.drivers/memory/tegra/tegra30-emc.c +71
-1@@ -9,6 +9,7 @@* Copyright (C) 2019 GRATE-DRIVER project */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/clk/tegra.h> #include <linux/debugfs.h> @@ -31,11 +32,15 @@#include <soc/tegra/common.h> #include <soc/tegra/fuse.h> +#include "../jedec_ddr.h" +#include "../of_memory.h" +#include "mc.h" #define EMC_INTSTATUS 0x000#define EMC_INTMASK 0x004#define EMC_DBG 0x008 +#define EMC_ADR_CFG 0x010#define EMC_CFG 0x00c#define EMC_REFCTRL 0x020#define EMC_TIMING_CONTROL 0x028@@ -81,6 +86,7 @@#define EMC_EMRS 0x0d0#define EMC_SELF_REF 0x0e0#define EMC_MRW 0x0e8 +#define EMC_MRR 0x0ec#define EMC_XM2DQSPADCTRL3 0x0f8#define EMC_FBIO_SPARE 0x100#define EMC_FBIO_CFG5 0x104@@ -208,6 +214,13 @@#define EMC_REFRESH_OVERFLOW_INT BIT(3)#define EMC_CLKCHANGE_COMPLETE_INT BIT(4) +#define EMC_MRR_DIVLD_INT BIT(5) + +#define EMC_MRR_DEV_SELECTN GENMASK(31, 30) +#define EMC_MRR_MRR_MA GENMASK(23, 16) +#define EMC_MRR_MRR_DATA GENMASK(15, 0) + +#define EMC_ADR_CFG_EMEM_NUMDEV BIT(0)enum emc_dram_type {DRAM_TYPE_DDR3 ,@@ -378,6 +391,8 @@ struct tegra_emc {/* protect shared rate-change code path */ struct mutex rate_lock; + +bool mrr_error; };static int emc_seq_update_timing (struct tegra_emc *emc)@@ -1008,12 +1023,18 @@ static int emc_load_timings_from_dt(struct tegra_emc *emc,return 0 ; } -static struct device_node *emc_find_node_by_ram_code (struct device *dev) +static struct device_node *emc_find_node_by_ram_code (struct tegra_emc *emc) { +struct device *dev = emc->dev;struct device_node *np;u32 value, ram_code;int err; +if (emc->mrr_error) { +dev_warn (dev,"memory timings skipped due to MRR error\n" ); +return NULL ; + } +if (of_get_child_count (dev->of_node) ==0 ) {dev_info_once (dev,"device-tree doesn't have memory timings\n" );return NULL ;@@ -1035,11 +1056,73 @@ static struct device_node *emc_find_node_by_ram_code(struct device *dev)return NULL ; } +static int emc_read_lpddr_mode_register (struct tegra_emc *emc, +unsigned int emem_dev, +unsigned int register_addr, +unsigned int *register_data) +{ +u32 memory_dev = emem_dev +1 ; +u32 val, mr_mask =0xff ; +int err; + +/* clear data-valid interrupt status */ +writel_relaxed (EMC_MRR_DIVLD_INT , emc->regs +EMC_INTSTATUS ); + +/* issue mode register read request */ + val =FIELD_PREP (EMC_MRR_DEV_SELECTN , memory_dev); + val |=FIELD_PREP (EMC_MRR_MRR_MA , register_addr); + +writel_relaxed (val, emc->regs +EMC_MRR ); + +/* wait for the LPDDR2 data-valid interrupt */ + err =readl_relaxed_poll_timeout_atomic (emc->regs +EMC_INTSTATUS , val, + val &EMC_MRR_DIVLD_INT , +1 ,100 ); +if (err) { +dev_err (emc->dev,"mode register %u read failed: %d\n" , + register_addr, err); + emc->mrr_error = true; +return err; + } + +/* read out mode register data */ + val =readl_relaxed (emc->regs +EMC_MRR ); + *register_data =FIELD_GET (EMC_MRR_MRR_DATA , val) & mr_mask; + +return 0 ; +} + +static void emc_read_lpddr_sdram_info (struct tegra_emc *emc, +unsigned int emem_dev) +{ +union lpddr2_basic_config4 basic_conf4; +unsigned int manufacturer_id; +unsigned int revision_id1; +unsigned int revision_id2; + +/* these registers are standard for all LPDDR JEDEC memory chips */ +emc_read_lpddr_mode_register (emc, emem_dev,5 , &manufacturer_id); +emc_read_lpddr_mode_register (emc, emem_dev,6 , &revision_id1); +emc_read_lpddr_mode_register (emc, emem_dev,7 , &revision_id2); +emc_read_lpddr_mode_register (emc, emem_dev,8 , &basic_conf4.value);
drivers/memory/tegra/tegra30-emc.c static struct device_node *emc_find_node_by_ram_code(struct device *dev) · line 1117
Quoted 10 lines
drivers/memory/tegra/tegra30-emc.c +10
-0+ +dev_info (emc->dev,"SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n" , + emem_dev, manufacturer_id, +lpddr2_jedec_manufacturer (manufacturer_id), + revision_id1, revision_id2, +4 >> basic_conf4.arch_type, +64 << basic_conf4.density, +32 >> basic_conf4.io_width); +} +
Quickly looking, these two functions are exactly the same as ones in tegra20-emc.c
. Later you might come up with another set for other SoCs, so it looks it is worth to share these.
Best regards,
Krzysztof
20.12.2021 14:03, Krzysztof Kozlowski пишет:
Quoted 163 lines · Dmitry Osipenko
Quoted 162 lines
Print out memory type and LPDDR2 configuration on Tegra30, making it similar to the memory info printed by the Tegra20 memory driver. This info is useful for debugging purposes.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/memory/tegra/Kconfig | 1 + drivers/memory/tegra/tegra30-emc.c | 131 ++++++++++++++++++++++++++--- 2 files changed, 122 insertions(+), 10 deletions(-)drivers/memory/tegra/Kconfig +1
-0@@ -28,6 +28,7 @@ config TEGRA30_EMC default y depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST select PM_OPP + select DDR help This driver is for the External Memory Controller (EMC) found on Tegra30 chips. The EMC controls the external DRAM on the board.drivers/memory/tegra/tegra30-emc.c +78
-1@@ -9,6 +9,7 @@* Copyright (C) 2019 GRATE-DRIVER project */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/clk/tegra.h> #include <linux/debugfs.h> @@ -31,11 +32,15 @@#include <soc/tegra/common.h> #include <soc/tegra/fuse.h> +#include "../jedec_ddr.h" +#include "../of_memory.h" +#include "mc.h" #define EMC_INTSTATUS 0x000#define EMC_INTMASK 0x004#define EMC_DBG 0x008 +#define EMC_ADR_CFG 0x010#define EMC_CFG 0x00c#define EMC_REFCTRL 0x020#define EMC_TIMING_CONTROL 0x028@@ -81,6 +86,7 @@#define EMC_EMRS 0x0d0#define EMC_SELF_REF 0x0e0#define EMC_MRW 0x0e8 +#define EMC_MRR 0x0ec#define EMC_XM2DQSPADCTRL3 0x0f8#define EMC_FBIO_SPARE 0x100#define EMC_FBIO_CFG5 0x104@@ -208,6 +214,13 @@#define EMC_REFRESH_OVERFLOW_INT BIT(3)#define EMC_CLKCHANGE_COMPLETE_INT BIT(4) +#define EMC_MRR_DIVLD_INT BIT(5) + +#define EMC_MRR_DEV_SELECTN GENMASK(31, 30) +#define EMC_MRR_MRR_MA GENMASK(23, 16) +#define EMC_MRR_MRR_DATA GENMASK(15, 0) + +#define EMC_ADR_CFG_EMEM_NUMDEV BIT(0)enum emc_dram_type {DRAM_TYPE_DDR3 ,@@ -378,6 +391,8 @@ struct tegra_emc {/* protect shared rate-change code path */ struct mutex rate_lock; + +bool mrr_error; };static int emc_seq_update_timing (struct tegra_emc *emc)@@ -1008,12 +1023,18 @@ static int emc_load_timings_from_dt(struct tegra_emc *emc,return 0 ; } -static struct device_node *emc_find_node_by_ram_code (struct device *dev) +static struct device_node *emc_find_node_by_ram_code (struct tegra_emc *emc) { +struct device *dev = emc->dev;struct device_node *np;u32 value, ram_code;int err; +if (emc->mrr_error) { +dev_warn (dev,"memory timings skipped due to MRR error\n" ); +return NULL ; + } +if (of_get_child_count (dev->of_node) ==0 ) {dev_info_once (dev,"device-tree doesn't have memory timings\n" );return NULL ;@@ -1035,11 +1056,73 @@ static struct device_node *emc_find_node_by_ram_code(struct device *dev)return NULL ; } +static int emc_read_lpddr_mode_register (struct tegra_emc *emc, +unsigned int emem_dev, +unsigned int register_addr, +unsigned int *register_data) +{ +u32 memory_dev = emem_dev +1 ; +u32 val, mr_mask =0xff ; +int err; + +/* clear data-valid interrupt status */ +writel_relaxed (EMC_MRR_DIVLD_INT , emc->regs +EMC_INTSTATUS ); + +/* issue mode register read request */ + val =FIELD_PREP (EMC_MRR_DEV_SELECTN , memory_dev); + val |=FIELD_PREP (EMC_MRR_MRR_MA , register_addr); + +writel_relaxed (val, emc->regs +EMC_MRR ); + +/* wait for the LPDDR2 data-valid interrupt */ + err =readl_relaxed_poll_timeout_atomic (emc->regs +EMC_INTSTATUS , val, + val &EMC_MRR_DIVLD_INT , +1 ,100 ); +if (err) { +dev_err (emc->dev,"mode register %u read failed: %d\n" , + register_addr, err); + emc->mrr_error = true; +return err; + } + +/* read out mode register data */ + val =readl_relaxed (emc->regs +EMC_MRR ); + *register_data =FIELD_GET (EMC_MRR_MRR_DATA , val) & mr_mask; + +return 0 ; +} + +static void emc_read_lpddr_sdram_info (struct tegra_emc *emc, +unsigned int emem_dev) +{ +union lpddr2_basic_config4 basic_conf4; +unsigned int manufacturer_id; +unsigned int revision_id1; +unsigned int revision_id2; + +/* these registers are standard for all LPDDR JEDEC memory chips */ +emc_read_lpddr_mode_register (emc, emem_dev,5 , &manufacturer_id); +emc_read_lpddr_mode_register (emc, emem_dev,6 , &revision_id1); +emc_read_lpddr_mode_register (emc, emem_dev,7 , &revision_id2); +emc_read_lpddr_mode_register (emc, emem_dev,8 , &basic_conf4.value); + + dev_info(emc->dev, "SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n", + emem_dev, manufacturer_id, + lpddr2_jedec_manufacturer(manufacturer_id), + revision_id1, revision_id2, + 4 >> basic_conf4.arch_type, + 64 << basic_conf4.density,
Quoted 8 lines
drivers/memory/tegra/tegra30-emc.c static struct device_node *emc_find_node_by_ram_code(struct device *dev) · line 1117
Quoted 3 lines
drivers/memory/tegra/tegra30-emc.c +3
-0+ 32 >> basic_conf4.io_width); +} +Quickly looking, these two functions are exactly the same as ones in
tegra20-emc.c
. Later you might come up with another set for other SoCs, so it looks it is worth to share these.
Should be too much trouble for not much gain, IMO. How many bytes will be shared in the end? There is no much code here, we may lose more than win. All these Tegra EMC drivers can be compiled as a loadable modules, that's what distro kernels usually do. There are no plans for other SoCs for today.
I don't see how that sharing could be done easily and nicely. Please tell if you see.
Quoted 173 lines · Dmitry Osipenko
20.12.2021 14:03, Krzysztof Kozlowski пишет:
Quoted 163 lines · Dmitry Osipenko
Quoted 162 lines
Print out memory type and LPDDR2 configuration on Tegra30, making it similar to the memory info printed by the Tegra20 memory driver. This info is useful for debugging purposes.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/memory/tegra/Kconfig | 1 + drivers/memory/tegra/tegra30-emc.c | 131 ++++++++++++++++++++++++++--- 2 files changed, 122 insertions(+), 10 deletions(-)drivers/memory/tegra/Kconfig +1
-0@@ -28,6 +28,7 @@ config TEGRA30_EMC default y depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST select PM_OPP + select DDR help This driver is for the External Memory Controller (EMC) found on Tegra30 chips. The EMC controls the external DRAM on the board.drivers/memory/tegra/tegra30-emc.c +78
-1@@ -9,6 +9,7 @@* Copyright (C) 2019 GRATE-DRIVER project */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/clk/tegra.h> #include <linux/debugfs.h> @@ -31,11 +32,15 @@#include <soc/tegra/common.h> #include <soc/tegra/fuse.h> +#include "../jedec_ddr.h" +#include "../of_memory.h" +#include "mc.h" #define EMC_INTSTATUS 0x000#define EMC_INTMASK 0x004#define EMC_DBG 0x008 +#define EMC_ADR_CFG 0x010#define EMC_CFG 0x00c#define EMC_REFCTRL 0x020#define EMC_TIMING_CONTROL 0x028@@ -81,6 +86,7 @@#define EMC_EMRS 0x0d0#define EMC_SELF_REF 0x0e0#define EMC_MRW 0x0e8 +#define EMC_MRR 0x0ec#define EMC_XM2DQSPADCTRL3 0x0f8#define EMC_FBIO_SPARE 0x100#define EMC_FBIO_CFG5 0x104@@ -208,6 +214,13 @@#define EMC_REFRESH_OVERFLOW_INT BIT(3)#define EMC_CLKCHANGE_COMPLETE_INT BIT(4) +#define EMC_MRR_DIVLD_INT BIT(5) + +#define EMC_MRR_DEV_SELECTN GENMASK(31, 30) +#define EMC_MRR_MRR_MA GENMASK(23, 16) +#define EMC_MRR_MRR_DATA GENMASK(15, 0) + +#define EMC_ADR_CFG_EMEM_NUMDEV BIT(0)enum emc_dram_type {DRAM_TYPE_DDR3 ,@@ -378,6 +391,8 @@ struct tegra_emc {/* protect shared rate-change code path */ struct mutex rate_lock; + +bool mrr_error; };static int emc_seq_update_timing (struct tegra_emc *emc)@@ -1008,12 +1023,18 @@ static int emc_load_timings_from_dt(struct tegra_emc *emc,return 0 ; } -static struct device_node *emc_find_node_by_ram_code (struct device *dev) +static struct device_node *emc_find_node_by_ram_code (struct tegra_emc *emc) { +struct device *dev = emc->dev;struct device_node *np;u32 value, ram_code;int err; +if (emc->mrr_error) { +dev_warn (dev,"memory timings skipped due to MRR error\n" ); +return NULL ; + } +if (of_get_child_count (dev->of_node) ==0 ) {dev_info_once (dev,"device-tree doesn't have memory timings\n" );return NULL ;@@ -1035,11 +1056,73 @@ static struct device_node *emc_find_node_by_ram_code(struct device *dev)return NULL ; } +static int emc_read_lpddr_mode_register (struct tegra_emc *emc, +unsigned int emem_dev, +unsigned int register_addr, +unsigned int *register_data) +{ +u32 memory_dev = emem_dev +1 ; +u32 val, mr_mask =0xff ; +int err; + +/* clear data-valid interrupt status */ +writel_relaxed (EMC_MRR_DIVLD_INT , emc->regs +EMC_INTSTATUS ); + +/* issue mode register read request */ + val =FIELD_PREP (EMC_MRR_DEV_SELECTN , memory_dev); + val |=FIELD_PREP (EMC_MRR_MRR_MA , register_addr); + +writel_relaxed (val, emc->regs +EMC_MRR ); + +/* wait for the LPDDR2 data-valid interrupt */ + err =readl_relaxed_poll_timeout_atomic (emc->regs +EMC_INTSTATUS , val, + val &EMC_MRR_DIVLD_INT , +1 ,100 ); +if (err) { +dev_err (emc->dev,"mode register %u read failed: %d\n" , + register_addr, err); + emc->mrr_error = true; +return err; + } + +/* read out mode register data */ + val =readl_relaxed (emc->regs +EMC_MRR ); + *register_data =FIELD_GET (EMC_MRR_MRR_DATA , val) & mr_mask; + +return 0 ; +} + +static void emc_read_lpddr_sdram_info (struct tegra_emc *emc, +unsigned int emem_dev) +{ +union lpddr2_basic_config4 basic_conf4; +unsigned int manufacturer_id; +unsigned int revision_id1; +unsigned int revision_id2; + +/* these registers are standard for all LPDDR JEDEC memory chips */ +emc_read_lpddr_mode_register (emc, emem_dev,5 , &manufacturer_id); +emc_read_lpddr_mode_register (emc, emem_dev,6 , &revision_id1); +emc_read_lpddr_mode_register (emc, emem_dev,7 , &revision_id2); +emc_read_lpddr_mode_register (emc, emem_dev,8 , &basic_conf4.value); + + dev_info(emc->dev, "SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n", + emem_dev, manufacturer_id, + lpddr2_jedec_manufacturer(manufacturer_id), + revision_id1, revision_id2, + 4 >> basic_conf4.arch_type, + 64 << basic_conf4.density,Quoted 8 lines
drivers/memory/tegra/tegra30-emc.c static struct device_node *emc_find_node_by_ram_code(struct device *dev) · line 1117
Quoted 3 lines
drivers/memory/tegra/tegra30-emc.c +3
-0+ 32 >> basic_conf4.io_width); +} +Quickly looking, these two functions are exactly the same as ones in
tegra20-emc.c
. Later you might come up with another set for other SoCs, so it looks it is worth to share these.
Quoted 5 lines
Should be too much trouble for not much gain, IMO. How many bytes will be shared in the end? There is no much code here, we may lose more than win. All these Tegra EMC drivers can be compiled as a loadable modules, that's what distro kernels usually do. There are no plans for other SoCs for today.
It's not about the bytes but source code lines to maintain and fix (if there is something to fix). But if you don't plan to make a third copy of it, it is okay.
Quoted 3 lines
I don't see how that sharing could be done easily and nicely. Please tell if you see.
Since it is not about duplicated object code, but code for review, it is pretty straightforward:
1. Create tegra-emc-common.[ch]
2. In Makefile:
+tegra20_emc-y += tegra20-emc.o tegra-emc-common.o
+obj-$(CONFIG_TEGRA20_EMC) += tegra20_emc.o
+
+tegra30_emc-y += tegra30-emc.o tegra-emc-common.o
+obj-$(CONFIG_TEGRA30_EMC) += tegra30_emc.o
Best regards,
Krzysztof
21.12.2021 11:14, Krzysztof Kozlowski пишет:
Quoted 27 lines
Quoted 27 lines
Quoted 27 lines
Quoted 13 lines
drivers/memory/tegra/tegra30-emc.c +13
-0+static void emc_read_lpddr_sdram_info (struct tegra_emc *emc, +unsigned int emem_dev) +{ +union lpddr2_basic_config4 basic_conf4; +unsigned int manufacturer_id; +unsigned int revision_id1; +unsigned int revision_id2; + +/* these registers are standard for all LPDDR JEDEC memory chips */ +emc_read_lpddr_mode_register (emc, emem_dev,5 , &manufacturer_id); +emc_read_lpddr_mode_register (emc, emem_dev,6 , &revision_id1); +emc_read_lpddr_mode_register (emc, emem_dev,7 , &revision_id2); +emc_read_lpddr_mode_register (emc, emem_dev,8 , &basic_conf4.value);drivers/memory/tegra/tegra30-emc.c static struct device_node *emc_find_node_by_ram_code(struct device *dev) · line 1117
Quoted 10 lines
drivers/memory/tegra/tegra30-emc.c +10
-0+ +dev_info (emc->dev,"SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n" , + emem_dev, manufacturer_id, +lpddr2_jedec_manufacturer (manufacturer_id), + revision_id1, revision_id2, +4 >> basic_conf4.arch_type, +64 << basic_conf4.density, +32 >> basic_conf4.io_width); +} +Quickly looking, these two functions are exactly the same as ones in
tegra20-emc.c
. Later you might come up with another set for other SoCs, so it looks it is worth to share these.
Quoted 8 lines
Quoted 5 lines
Should be too much trouble for not much gain, IMO. How many bytes will be shared in the end? There is no much code here, we may lose more than win. All these Tegra EMC drivers can be compiled as a loadable modules, that's what distro kernels usually do. There are no plans for other SoCs for today.
It's not about the bytes but source code lines to maintain and fix (if there is something to fix). But if you don't plan to make a third copy of it, it is okay.
Only Tegra114 SoC potentially supports LPDDR2, later SoCs dropped LPDDR2 support. We don't even have memory driver for T114 at all in the today's mainline. I also doubt that there were any consumer T114 devices sold with LPDDR2. Hence we shouldn't have a need for the third copy anytime soon, likely ever.
Quoted 9 lines
Quoted 2 lines
I don't see how that sharing could be done easily and nicely. Please tell if you see.
Since it is not about duplicated object code, but code for review, it is pretty straightforward:
1. Create tegra-emc-common.[ch]
2. InMakefile:
Review
Quoted 9 lines
(quoted diff) +5
-0+tegra20_emc-y += tegra20-emc.o tegra-emc-common.o +obj-$(CONFIG_TEGRA20_EMC) += tegra20_emc.o + +tegra30_emc-y += tegra30-emc.o tegra-emc-common.o +obj-$(CONFIG_TEGRA30_EMC) += tegra30_emc.o
The problem that struct tegra_emc isn't shareable and this common code should introduce messiness to the Tegra EMC drivers. I'd prefer not to share anything for now and get back to this option with sharing later on, if will be another good reason.
18.12.2021 02:47, Dmitry Osipenko пишет:
drivers/memory/tegra/tegra30-emc.c static struct device_node *emc_find_node_by_ram_code(struct device *dev) · line 1064
Quoted 6 lines
drivers/memory/tegra/tegra30-emc.c +6
-0+static int emc_read_lpddr_mode_register (struct tegra_emc *emc, +unsigned int emem_dev, +unsigned int register_addr, +unsigned int *register_data) +{ +u32 memory_dev = emem_dev +1 ;
I just noticed in the datasheet that memory_dev needs to be inverted, otherwise we read dev0 instead of dev1 and vice versa. This also needs to be corrected in the T20 EMC driver. It's not really a problem since both memory chips usually are equal, nevertheless I'll fix it in v2 after we will decide on whether this code needs to be shared or not.