Skip to contentSkip to conversation

: No AC3/DTS via SPDIF on Intel 82801DB-ICH4 with CS4299

ALSA - driver 0000839 [email protected] 1 participant 1 message Jun 22, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=839>
======================================================================
Reported By: Mimosius
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   839
Category:                   PCI - intel8x0
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     new
Distribution:               SuSE 9.2
Kernel Version:             2.6.8-24.10 + 2.6.10
======================================================================
Date Submitted:             01-21-2005 03:12 CET
Last Modified:              06-22-2005 17:56 CEST

======================================================================
Summary: No AC3/DTS via SPDIF on Intel 82801DB-ICH4 with
CS4299
Description:
Audio-mode via SPDIF works fine but I can't get any non-audio passthru working.

Using 'ac3play -C test.ac3' SPDIF output is set to AES0=0x2 AES1=0x82 AES2=0x0 AES3=0x2 and the PCM indicator on external decoder turns off, but there seems to arrive no decodeable signal on receiver side. There are no errors or warnings after loading soundrivers and there are no other soundcards plugged in (notebook).

here are some system informations:

# cat /etc/modprobe.d/sound
alias snd-card-0 snd-intel8x0
options snd-ac97-codec
options snd-intel8x0 enable=1 index=0
# cat /proc/asound/pcm' 
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
# cat /proc/asound/card0/codec97#0/ac97#0-0' (while playing ac3 using
ac3dec -C)
0-0/0: Cirrus Logic CS4299 rev 4

Capabilities : -headphone out-
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Crystal Semi 3D Stereo Enhancement

Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off

3D enhancement   : off
Loudness         : off
Mono output      : Mic
Mic select       : Mic1

ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0 VRA
Extended status : VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
SPDIF Control : Consumer Non-audio Category=0x2 Generation=1 Rate=48kHz
Enabled

# cat /proc/asound/card0/codec97#0/ac97#0-0+regs (while playing ac3 using
ac3dec -C)
0:00 = 1990
0:02 = 3f3f
0:04 = 9f1f
0:06 = 801f
0:08 = 0000
0:0a = 801e
0:0c = 801f
0:0e = 8000
0:10 = 9f1f
0:12 = 9f1f
0:14 = 9f1f
0:16 = 9f1f
0:18 = 8000
0:1a = 0606
0:1c = 0f0f
0:1e = 0000
0:20 = 0200
0:22 = 0000
0:24 = 0000
0:26 = 800f
0:28 = 0201
0:2a = 0001
0:2c = bb80
0:2e = 0000
0:30 = 0000
0:32 = bb80
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0404
0:5c = 0000
0:5e = 0080
0:60 = 0022
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 8826
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 003f
0:7a = 0000
0:7c = 4352
0:7e = 5934

======================================================================

----------------------------------------------------------------------
Mimosius - 06-22-05 13:08
----------------------------------------------------------------------
With 1.0.9 there is still no chance to get passthru working. I tested alsa-lib 1.0.9 and driver 1.0.9b with SuSE 9.3 and kernel 2.6.11.4-21.7-default. It seems the data send through S/PDIF did not contain a valid header per packet, because the decoder/receiver detects no AC3/DTS Signal. I'm still a developer but not familar with alsa, so i don't know where to start debugging. Any hints would be appreciated. Thanks!

----------------------------------------------------------------------
tiwai - 06-22-05 17:56
----------------------------------------------------------------------
Well, two possibilities can be counted:
1. the SPDIF signal is sent through a wrong channel or recoded somehow wrongly, so the non-audio data is broken
2. the SPDIF non-audio status bit is not set. Some receivers are so sentive that they don't accept SPDIF signals with that.

The latter happens more often, but I'm not sure which one (or both?) in your case. The former one would be either:
- you passed the data through the normal DMA via slot3/4, or
- wrong sample rate, not supported by the codec, or
- any unknown reason?

Issue History
Date Modified Username Field Change
======================================================================

01-21-05 03:12 Mimosius       New Issue                                    
01-21-05 03:12 Mimosius       Distribution              => SuSE 9.2        
01-21-05 03:12 Mimosius       Kernel Version            => 2.6.8-24.10 + 2.6.10
01-21-05 03:13 Mimosius       Issue Monitored: Mimosius                    
03-01-05 11:31 Mimosius       Note Added: 0003758                          
03-15-05 21:37 Mimosius       Note Added: 0003917                          
03-16-05 12:47 tiwai          Note Added: 0003945                          
03-16-05 12:47 tiwai          Note Added: 0003946                          
03-17-05 01:00 Mimosius       Note Added: 0003975                          
06-22-05 13:08 Mimosius       Note Added: 0005132                          
06-22-05 17:56 tiwai          Note Added: 0005137                          

======================================================================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click