Skip to contentSkip to conversation

x86/boot: validate console=uart8250 baud rate to avoid early boot hang

PATCH Superseded Thorsten Blum 1 participant 2 messages May 14 – May 28

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86/boot: validate console=uart8250 baud rate to avoid early boot hang

When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init().

Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang.

Fixes ce0aa5dd20e4 ("x86, setup: Make the setup code also accept console=uart8250")
---
 arch/x86/boot/early_serial_console.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
arch/x86/boot/early_serial_console.c +6 -4
index 023bf1c3de8b..28a887af430d 100644
@@ -117,7 +117,7 @@ static unsigned int probe_baud(int port)
 static void parse_console_uart8250(void)
 {
 	char optstr[64], *options;
-	int baud = DEFAULT_BAUD;
+	int baud;
 	int port = 0;
 
 	/*
@@ -136,9 +136,11 @@ static void parse_console_uart8250(void)
 	else
 		return;
 
-	if (options && (options[0] == ','))
-		baud = simple_strtoull(options + 1, &options, 0);
-	else
+	if (options && (options[0] == ',')) {
+		baud = simple_strtoull(options + 1, NULL, 0);
+		if (!baud)
+			baud = DEFAULT_BAUD;
+	} else
 		baud = probe_baud(port);
 
 	if (port)
#1 lore raw
Quoted 32 lines · Thorsten Blum

When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init().

Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang.

Fixes ce0aa5dd20e4 ("x86, setup: Make the setup code also accept console=uart8250")
---
 arch/x86/boot/early_serial_console.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
arch/x86/boot/early_serial_console.c +1 -2
index 023bf1c3de8b..28a887af430d 100644
@@ -117,7 +117,7 @@ static unsigned int probe_baud(int port)
 static void parse_console_uart8250(void)
 {
 	char optstr[64], *options;
-	int baud = DEFAULT_BAUD;
+	int baud;
 	int port = 0;
 
 	/*
@@ -136,9 +136,11 @@ static void parse_console_uart8250(void)
 	else
 		return;
 
-	if (options && (options[0] == ','))

arch/x86/boot/early_serial_console.c static void parse_console_uart8250(void) · line 146

Quoted 10 lines
arch/x86/boot/early_serial_console.c +5 -2
-		baud = simple_strtoull(options + 1, &options, 0);
-	else
+	if (options && (options[0] == ',')) {
+		baud = simple_strtoull(options + 1, NULL, 0);
+		if (!baud)
+			baud = DEFAULT_BAUD;
+	} else
 		baud = probe_baud(port);
 
 	if (port)

Gentle ping?

I also tested this and verified that it works.