add basic b4 config file
PATCH 1/1 add basic b4 config file
From: Quentin Schulz <[email protected]>
b4[1] is a very nice tool for mail-based contribution. A config[2] file exists to set up a few defaults. We can use it to set the To recipients to always add, in our case the mailing list, and the Cc recipients, in our case, Trevor's address.
Additionally, automatically provide a default prefix so that one doesn't need to not forget to run b4 prep --set-prefixes wic for each series.
[1] https://pypi.org/project/b4/
[2] https://b4.docs.kernel.org/en/latest/config.html
--- .b4-config | 4 ++++ 1 file changed, 4 insertions(+)
.b4-config new file +4 -0
@@ -0,0 +1,4 @@ +[b4] + send-series-to = [email protected] + send-series-cc = [email protected] + send-prefixes = wic
---
base-commit: 5974ade11032f218841d9f449ef0efeee3f9a2ca
change-id: 20260424-b4-0ee9ab75fa75
Best regards,
Signature · 1 line
Quentin Schulz <[email protected]>
OK so this is very confusing. The default branch in cgit is origin/feature/no-create and I got my info from the README.md there, which differs from the README.md from instructions in the README.md in the master branch where it isn't requested to Cc Trevor.
Quoted 37 lines · Quentin Schulz
From: Quentin Schulz <[email protected]>
b4[1] is a very nice tool for mail-based contribution. A config[2] file exists to set up a few defaults. We can use it to set the To recipients to always add, in our case the mailing list, and the Cc recipients, in our case, Trevor's address.
Additionally, automatically provide a default prefix so that one doesn't need to not forget to run
b4 prep --set-prefixes wicfor each series.[1] https://pypi.org/project/b4/
[2] https://b4.docs.kernel.org/en/latest/config.htmlSigned-off-by Quentin Schulz <[email protected]>--- .b4-config | 4 ++++ 1 file changed, 4 insertions(+).b4-config new file +4
-1@@ -0,0 +1,4 @@ +[b4] + send-series-to = [email protected] + send-series-cc = [email protected] + send-prefixes = wic ---base-commit:
5974ade11032f218841d9f449ef0efeee3f9a2ca
change-id: 20260424-b4-0ee9ab75fa75Best regards,
--
Quentin Schulz <[email protected]>
Trevor Woerner
AppliedQuoted 4 lines · Quentin Schulz
OK so this is very confusing. The default branch in cgit is origin/feature/no-create and I got my info from the README.md there, which differs from the README.md from instructions in the README.md in the master branch where it isn't requested to Cc Trevor.
I asked Michael Halstead to take a look and change it. We think it's fixed now.
Quoted 12 lines · Quentin Schulz
Quoted 10 lines
From: Quentin Schulz <[email protected]>
b4[1] is a very nice tool for mail-based contribution. A config[2] file exists to set up a few defaults. We can use it to set the To recipients to always add, in our case the mailing list, and the Cc recipients, in our case, Trevor's address.
Additionally, automatically provide a default prefix so that one doesn't need to not forget to run
b4 prep --set-prefixes wicfor each series.
Quoted 7 lines
Quoted 7 lines
[1] https://pypi.org/project/b4/
[2] https://b4.docs.kernel.org/en/latest/config.htmlSigned-off-by Quentin Schulz <[email protected]>--- .b4-config | 4 ++++ 1 file changed, 4 insertions(+)
Applied to wic, master branch. Thanks!
Quoted 21 lines
Quoted 20 lines
.b4-config new file +4
-1@@ -0,0 +1,4 @@ +[b4] + send-series-to = [email protected] + send-series-cc = [email protected] + send-prefixes = wic ---base-commit:
5974ade11032f218841d9f449ef0efeee3f9a2ca
change-id: 20260424-b4-0ee9ab75fa75Best regards,
--
Quentin Schulz <[email protected]>
Hi Trevor,
Quoted 9 lines · Trevor Woerner
Quoted 4 lines · Quentin Schulz
OK so this is very confusing. The default branch in cgit is origin/feature/no-create and I got my info from the README.md there, which differs from the README.md from instructions in the README.md in the master branch where it isn't requested to Cc Trevor.
I asked Michael Halstead to take a look and change it. We think it's fixed now.
I think too, thanks!
Quoted 12 lines
Quoted 12 lines · Quentin Schulz
Quoted 10 lines
From: Quentin Schulz <[email protected]>
b4[1] is a very nice tool for mail-based contribution. A config[2] file exists to set up a few defaults. We can use it to set the To recipients to always add, in our case the mailing list, and the Cc recipients, in our case, Trevor's address.
Additionally, automatically provide a default prefix so that one doesn't need to not forget to run
b4 prep --set-prefixes wicfor each series.
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
[1] https://pypi.org/project/b4/
[2] https://b4.docs.kernel.org/en/latest/config.htmlSigned-off-by Quentin Schulz <[email protected]>--- .b4-config | 4 ++++ 1 file changed, 4 insertions(+)
Your gmail address is in the Cc recipients, which doesn't match what's been requested in the README.md in the master branch (only the ML in To recipients). Should we patch the README.md to align with .b4-config or the opposite?
Cheers,
Quentin
Quoted 36 lines · Quentin Schulz
Hi Trevor,
Quoted 9 lines · Trevor Woerner
Quoted 4 lines · Quentin Schulz
OK so this is very confusing. The default branch in cgit is origin/feature/no-create and I got my info from the README.md there, which differs from the README.md from instructions in the README.md in the master branch where it isn't requested to Cc Trevor.
I asked Michael Halstead to take a look and change it. We think it's fixed now.
I think too, thanks!
Quoted 12 lines
Quoted 12 lines · Quentin Schulz
Quoted 10 lines
From: Quentin Schulz <[email protected]>
b4[1] is a very nice tool for mail-based contribution. A config[2] file exists to set up a few defaults. We can use it to set the To recipients to always add, in our case the mailing list, and the Cc recipients, in our case, Trevor's address.
Additionally, automatically provide a default prefix so that one doesn't need to not forget to run
b4 prep --set-prefixes wicfor each series.Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
[1] https://pypi.org/project/b4/
[2] https://b4.docs.kernel.org/en/latest/config.htmlSigned-off-by Quentin Schulz <[email protected]>--- .b4-config | 4 ++++ 1 file changed, 4 insertions(+)
Quoted 4 lines
Your gmail address is in the Cc recipients, which doesn't match what's been requested in the README.md in the master branch (only the ML in To recipients). Should we patch the README.md to align with .b4-config or the opposite?
Might as well update the README to add it.
Thanks!