drm/panthor: intermittent freezes in Xorg xserver
Hi.
The system is Radxa Rock 5 ITX, RK3588, 32GB RAM,
mainline kernel v7.1.0 with panthor driver, mesa 26.0.7 with panfrost driver, xorg-server v21.1.22 accelerated by modesetting driver, x11perf v1.7.0.
The most clean way to reproduce this bug:
Form a console or ssh session, start Xorg in background, without a window manager, and then run x11perf on that display.
Xorg :0 &
x11perf -all -display :0
The bug: weird intermittent performance issues in some of the tests. Examples:
1000 reps @ 18.0799 msec ( 55.3/sec): 10x10 rectangle outline
1000 reps @ 18.0791 msec ( 55.3/sec): 10x10 rectangle outline
1000 reps @ 18.0790 msec ( 55.3/sec): 10x10 rectangle outline
1000 reps @ 18.0789 msec ( 55.3/sec): 10x10 rectangle outline
1000 reps @ 0.0287 msec ( 34800.0/sec): 10x10 rectangle outline
5000 trep @ 14.4691 msec ( 69.1/sec): 10x10 rectangle outline5000000 reps @ 0.0029 msec (345000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0009 msec (1100000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0012 msec (818000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (20900000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (32300000.0/sec): 1-pixel solid circle 25000000 trep @ 0.0010 msec (979000.0/sec): 1-pixel solid circle
1000 reps @ 31.6607 msec ( 31.6/sec): Fill 10x10 trapezoid
1000 reps @ 16.9012 msec ( 59.2/sec): Fill 10x10 trapezoid
1000 reps @ 0.0234 msec ( 42700.0/sec): Fill 10x10 trapezoid
1000 reps @ 0.0272 msec ( 36700.0/sec): Fill 10x10 trapezoid
1000 reps @ 32.1268 msec ( 31.1/sec): Fill 10x10 trapezoid
5000 trep @ 16.1479 msec ( 61.9/sec): Fill 10x10 trapezoidThere are no messages in kernel log or Xorg log.
Visually, most of the tests runs fast as expected, but in some of the tests it gets "stuck" randomly. The test suddenly freezes while drawing the pattern. Then, after a while (a few seconds up to a couple of minutes), it gets unstuck by itself, draws a few more patterns extremely fast for less than a second, and then it gets stuck again.
The small test patterns (10px) are a lot more often affected than large patterns (100px or more).
The bug can also be seen by trying to move or resize windows. Setting governors to "performance" for the CPU and/or GPU has no effect.
I'm available for tests.
Thanks.
Marius Dinu
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 5 lines · On Fri, 26 Jun 2026 14:50:17 +0300 Marius Dinu <[email protected]> wrote:
Hi.
The system is Radxa Rock 5 ITX, RK3588, 32GB RAM,
mainline kernel v7.1.0 with panthor driver, mesa 26.0.7 with panfrost driver, xorg-server v21.1.22 accelerated by modesetting driver, x11perf v1.7.0.
Are we sure that's a panthor issue? Also, is this a regression introduced by the latest kernel version, or has it been like that from the start?
Also, would you mind opening an issue on [1]?
Quoted 32 lines
The most clean way to reproduce this bug:
Form a console or ssh session, start Xorg in background, without a window manager, and then run x11perf on that display.Xorg :0 &
x11perf -all -display :0The bug: weird intermittent performance issues in some of the tests. Examples:
1000 reps @ 18.0799 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0791 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0790 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0789 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 0.0287 msec ( 34800.0/sec): 10x10 rectangle outline 5000 trep @ 14.4691 msec ( 69.1/sec): 10x10 rectangle outline5000000 reps @ 0.0029 msec (345000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0009 msec (1100000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0012 msec (818000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (20900000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (32300000.0/sec): 1-pixel solid circle 25000000 trep @ 0.0010 msec (979000.0/sec): 1-pixel solid circle1000 reps @ 31.6607 msec ( 31.6/sec): Fill 10x10 trapezoid 1000 reps @ 16.9012 msec ( 59.2/sec): Fill 10x10 trapezoid 1000 reps @ 0.0234 msec ( 42700.0/sec): Fill 10x10 trapezoid 1000 reps @ 0.0272 msec ( 36700.0/sec): Fill 10x10 trapezoid 1000 reps @ 32.1268 msec ( 31.1/sec): Fill 10x10 trapezoid 5000 trep @ 16.1479 msec ( 61.9/sec): Fill 10x10 trapezoid
Quoted 7 lines
There are no messages in kernel log or Xorg log.
Visually, most of the tests runs fast as expected, but in some of the tests it gets "stuck" randomly. The test suddenly freezes while drawing the pattern. Then, after a while (a few seconds up to a couple of minutes), it gets unstuck by itself, draws a few more patterns extremely fast for less than a second, and then it gets stuck again.
It smells like a signalling issue. Can you check the CPU activity and report any outstanding process? Can you maybe connect a gdb to the x11perf to see where it's blocked, and post the backtrace here (or in the gitlab issue)?
Regards,
Boris
I wonder if you're experiencing the same issue as this?
https://gitlab.freedesktop.org/mesa/mesa/-/work_items/15116
Quoted 70 lines · Boris Brezillon
Quoted 4 lines · On Fri, 26 Jun 2026 14:50:17 +0300 Marius Dinu <[email protected]> wrote:
Hi.
The system is Radxa Rock 5 ITX, RK3588, 32GB RAM,
mainline kernel v7.1.0 with panthor driver, mesa 26.0.7 with panfrostdriver,
Quoted 1 line
xorg-server v21.1.22 accelerated by modesetting driver, x11perf v1.7.0.
Are we sure that's a panthor issue? Also, is this a regression introduced by the latest kernel version, or has it been like that from the start?
Also, would you mind opening an issue on [1]?
Quoted 32 lines
The most clean way to reproduce this bug:
Form a console or ssh session, start Xorg in background, without a window manager, and then run x11perf on that display.Xorg :0 &
x11perf -all -display :0The bug: weird intermittent performance issues in some of the tests. Examples:
1000 reps @ 18.0799 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0791 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0790 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0789 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 0.0287 msec ( 34800.0/sec): 10x10 rectangle outline 5000 trep @ 14.4691 msec ( 69.1/sec): 10x10 rectangle outline5000000 reps @ 0.0029 msec (345000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0009 msec (1100000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0012 msec (818000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (20900000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (32300000.0/sec): 1-pixel solid circle 25000000 trep @ 0.0010 msec (979000.0/sec): 1-pixel solid circle1000 reps @ 31.6607 msec ( 31.6/sec): Fill 10x10 trapezoid 1000 reps @ 16.9012 msec ( 59.2/sec): Fill 10x10 trapezoid 1000 reps @ 0.0234 msec ( 42700.0/sec): Fill 10x10 trapezoid 1000 reps @ 0.0272 msec ( 36700.0/sec): Fill 10x10 trapezoid 1000 reps @ 32.1268 msec ( 31.1/sec): Fill 10x10 trapezoid 5000 trep @ 16.1479 msec ( 61.9/sec): Fill 10x10 trapezoidQuoted 3 lines
There are no messages in kernel log or Xorg log.
Visually, most of the tests runs fast as expected, but in some of the
tests
Quoted 1 line
it gets "stuck" randomly. The test suddenly freezes while drawing the
pattern.
Quoted 2 lines
Then, after a while (a few seconds up to a couple of minutes), it gets unstuck by itself, draws a few more patterns extremely fast for less
than a
Quoted 1 line
second, and then it gets stuck again.
It smells like a signalling issue. Can you check the CPU activity and report any outstanding process? Can you maybe connect a gdb to the x11perf to see where it's blocked, and post the backtrace here (or in the gitlab issue)?
Regards,
Boris
Silly me, I forgot to disable HTML email, so this one bounced for some, resending. Sorry about the duplicate.
I wonder if you're experiencing the same issue as this?
https://gitlab.freedesktop.org/mesa/mesa/-/work_items/15116
Quoted 72 lines · Erik Faye-Lund
I wonder if you're experiencing the same issue as this?
https://gitlab.freedesktop.org/mesa/mesa/-/work_items/15116
Quoted 66 lines · Boris Brezillon
Quoted 5 lines · On Fri, 26 Jun 2026 14:50:17 +0300 Marius Dinu <[email protected]> wrote:
Hi.
The system is Radxa Rock 5 ITX, RK3588, 32GB RAM,
mainline kernel v7.1.0 with panthor driver, mesa 26.0.7 with panfrost driver, xorg-server v21.1.22 accelerated by modesetting driver, x11perf v1.7.0.Are we sure that's a panthor issue? Also, is this a regression introduced by the latest kernel version, or has it been like that from the start?
Also, would you mind opening an issue on [1]?
Quoted 32 lines
The most clean way to reproduce this bug:
Form a console or ssh session, start Xorg in background, without a window manager, and then run x11perf on that display.Xorg :0 &
x11perf -all -display :0The bug: weird intermittent performance issues in some of the tests. Examples:
1000 reps @ 18.0799 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0791 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0790 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0789 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 0.0287 msec ( 34800.0/sec): 10x10 rectangle outline 5000 trep @ 14.4691 msec ( 69.1/sec): 10x10 rectangle outline5000000 reps @ 0.0029 msec (345000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0009 msec (1100000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0012 msec (818000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (20900000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (32300000.0/sec): 1-pixel solid circle 25000000 trep @ 0.0010 msec (979000.0/sec): 1-pixel solid circle1000 reps @ 31.6607 msec ( 31.6/sec): Fill 10x10 trapezoid 1000 reps @ 16.9012 msec ( 59.2/sec): Fill 10x10 trapezoid 1000 reps @ 0.0234 msec ( 42700.0/sec): Fill 10x10 trapezoid 1000 reps @ 0.0272 msec ( 36700.0/sec): Fill 10x10 trapezoid 1000 reps @ 32.1268 msec ( 31.1/sec): Fill 10x10 trapezoid 5000 trep @ 16.1479 msec ( 61.9/sec): Fill 10x10 trapezoidQuoted 7 lines
There are no messages in kernel log or Xorg log.
Visually, most of the tests runs fast as expected, but in some of the tests it gets "stuck" randomly. The test suddenly freezes while drawing the pattern. Then, after a while (a few seconds up to a couple of minutes), it gets unstuck by itself, draws a few more patterns extremely fast for less than a second, and then it gets stuck again.
It smells like a signalling issue. Can you check the CPU activity and report any outstanding process? Can you maybe connect a gdb to the x11perf to see where it's blocked, and post the backtrace here (or in the gitlab issue)?
Regards,
Boris
Quoted 7 lines · Erik Faye-Lund
Silly me, I forgot to disable HTML email, so this one bounced for some, resending. Sorry about the duplicate.
I wonder if you're experiencing the same issue as this?
I have no ideea. That bug report is way above my understanding. Sorry.
Quoted 63 lines
Quoted 63 lines · Boris Brezillon
Quoted 61 lines
Quoted 5 lines · On Fri, 26 Jun 2026 14:50:17 +0300 Marius Dinu <[email protected]> wrote:
Hi.
The system is Radxa Rock 5 ITX, RK3588, 32GB RAM,
mainline kernel v7.1.0 with panthor driver, mesa 26.0.7 with panfrost driver, xorg-server v21.1.22 accelerated by modesetting driver, x11perf v1.7.0.Are we sure that's a panthor issue? Also, is this a regression introduced by the latest kernel version, or has it been like that from the start?
Also, would you mind opening an issue on [1]?
Quoted 32 lines
The most clean way to reproduce this bug:
Form a console or ssh session, start Xorg in background, without a window manager, and then run x11perf on that display.Xorg :0 &
x11perf -all -display :0The bug: weird intermittent performance issues in some of the tests. Examples:
1000 reps @ 18.0799 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0791 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0790 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0789 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 0.0287 msec ( 34800.0/sec): 10x10 rectangle outline 5000 trep @ 14.4691 msec ( 69.1/sec): 10x10 rectangle outline5000000 reps @ 0.0029 msec (345000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0009 msec (1100000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0012 msec (818000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (20900000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (32300000.0/sec): 1-pixel solid circle 25000000 trep @ 0.0010 msec (979000.0/sec): 1-pixel solid circle1000 reps @ 31.6607 msec ( 31.6/sec): Fill 10x10 trapezoid 1000 reps @ 16.9012 msec ( 59.2/sec): Fill 10x10 trapezoid 1000 reps @ 0.0234 msec ( 42700.0/sec): Fill 10x10 trapezoid 1000 reps @ 0.0272 msec ( 36700.0/sec): Fill 10x10 trapezoid 1000 reps @ 32.1268 msec ( 31.1/sec): Fill 10x10 trapezoid 5000 trep @ 16.1479 msec ( 61.9/sec): Fill 10x10 trapezoidQuoted 7 lines
There are no messages in kernel log or Xorg log.
Visually, most of the tests runs fast as expected, but in some of the tests it gets "stuck" randomly. The test suddenly freezes while drawing the pattern. Then, after a while (a few seconds up to a couple of minutes), it gets unstuck by itself, draws a few more patterns extremely fast for less than a second, and then it gets stuck again.
It smells like a signalling issue. Can you check the CPU activity and report any outstanding process? Can you maybe connect a gdb to the x11perf to see where it's blocked, and post the backtrace here (or in the gitlab issue)?
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Regards,
Boris
Marius
Quoted 5 lines · Boris Brezillon
Quoted 2 lines · On Fri, 26 Jun 2026 14:50:17 +0300 Marius Dinu <[email protected]> wrote:
Hi.
Quoted 7 lines
Quoted 3 lines
The system is Radxa Rock 5 ITX, RK3588, 32GB RAM,
mainline kernel v7.1.0 with panthor driver, mesa 26.0.7 with panfrost driver, xorg-server v21.1.22 accelerated by modesetting driver, x11perf v1.7.0.Are we sure that's a panthor issue? Also, is this a regression introduced by the latest kernel version, or has it been like that from the start?
It was from the start, not a regression. I think I started from v6.18 on this board IIRC. If you need me to test earlier versions, say so.
Quoted 3 lines
Also, would you mind opening an issue on [1]?
I already did.
https://gitlab.freedesktop.org/mesa/mesa/-/work_items/15721
Quoted 40 lines
Quoted 32 lines
The most clean way to reproduce this bug:
Form a console or ssh session, start Xorg in background, without a window manager, and then run x11perf on that display.Xorg :0 &
x11perf -all -display :0The bug: weird intermittent performance issues in some of the tests. Examples:
1000 reps @ 18.0799 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0791 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0790 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 18.0789 msec ( 55.3/sec): 10x10 rectangle outline 1000 reps @ 0.0287 msec ( 34800.0/sec): 10x10 rectangle outline 5000 trep @ 14.4691 msec ( 69.1/sec): 10x10 rectangle outline5000000 reps @ 0.0029 msec (345000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0009 msec (1100000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0012 msec (818000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (20900000.0/sec): 1-pixel solid circle 5000000 reps @ 0.0000 msec (32300000.0/sec): 1-pixel solid circle 25000000 trep @ 0.0010 msec (979000.0/sec): 1-pixel solid circle1000 reps @ 31.6607 msec ( 31.6/sec): Fill 10x10 trapezoid 1000 reps @ 16.9012 msec ( 59.2/sec): Fill 10x10 trapezoid 1000 reps @ 0.0234 msec ( 42700.0/sec): Fill 10x10 trapezoid 1000 reps @ 0.0272 msec ( 36700.0/sec): Fill 10x10 trapezoid 1000 reps @ 32.1268 msec ( 31.1/sec): Fill 10x10 trapezoid 5000 trep @ 16.1479 msec ( 61.9/sec): Fill 10x10 trapezoidQuoted 7 lines
There are no messages in kernel log or Xorg log.
Visually, most of the tests runs fast as expected, but in some of the tests it gets "stuck" randomly. The test suddenly freezes while drawing the pattern. Then, after a while (a few seconds up to a couple of minutes), it gets unstuck by itself, draws a few more patterns extremely fast for less than a second, and then it gets stuck again.
Quoted 5 lines
It smells like a signalling issue. Can you check the CPU activity and report any outstanding process? Can you maybe connect a gdb to the x11perf to see where it's blocked, and post the backtrace here (or in the gitlab issue)?
x11perf is waiting on I/O (red "D" in htop). CPU is completely idle, not even grey "io-wait" activity.
I have no experience using gdb. Please give me the exact command to run.
Quoted 5 lines
Regards,
Boris
Marius