Skip to contentSkip to conversation

ASoC: tegra: Simplify error handling

PATCH In review [email protected] 3 participants 10 messages Jul 15

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover ASoC: tegra: Simplify error handling

From: bui duc phuc <[email protected]>

Hi all,

This series contains a few small cleanups for the Tegra ASoC drivers.
- Use dev_err_probe() for regmap initialization failures.
- Return the original error from snd_soc_add_component_controls().
- Use devm_clk_get_optional() for the optional sync_input clock.

Overall, this simplifies the error paths and makes the code more consistent.

Best regards,
Phuc

bui duc phuc (4):
ASoC: tegra: tegra20_das: Use dev_err_probe() for error handling
ASoC: tegra: tegra210_adx: Return the original error directly
ASoC: tegra: tegra210_amx: Return the original error directly
ASoC: tegra: tegra210: Use devm_clk_get_optional() for sync_input
clock

 sound/soc/tegra/tegra20_das.c  |  7 +++----
 sound/soc/tegra/tegra210_adx.c | 12 ++++--------
 sound/soc/tegra/tegra210_amx.c | 12 ++++--------
 sound/soc/tegra/tegra210_i2s.c | 10 +++++-----
 4 files changed, 16 insertions(+), 25 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/4 ASoC: tegra: tegra20_das: Use dev_err_probe() for error handling

From: bui duc phuc <[email protected]>

Replace the existing dev_err() and PTR_ERR() sequence with dev_err_probe(), preserving the original error code while simplifying the error handling.

---
 sound/soc/tegra/tegra20_das.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
sound/soc/tegra/tegra20_das.c +3 -4
index b48cc4a6967b..ea8bc9bcfa67 100644
@@ -167,10 +167,9 @@ static int tegra20_das_probe(struct platform_device *pdev)
 
 	das->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
 					    &tegra20_das_regmap_config);
-	if (IS_ERR(das->regmap)) {
-		dev_err(&pdev->dev, "regmap init failed\n");
-		return PTR_ERR(das->regmap);
-	}
+	if (IS_ERR(das->regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(das->regmap),
+				     "regmap init failed\n");
 
 	tegra20_das_connect_dap_to_dac(das, TEGRA20_DAS_DAP_ID_1,
 				       TEGRA20_DAS_DAP_SEL_DAC1);
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 1/4
#2 lore raw

Re: [PATCH 1/4] ASoC: tegra: tegra20_das: Use dev_err_probe() for error handling

Quoted 10 lines · On Wed, Jul 15, 2026 at 12:11:12PM +0700, [email protected] wrote:

From: bui duc phuc <[email protected]>

Replace the existing dev_err() and PTR_ERR() sequence with dev_err_probe(), preserving the original error code while simplifying the error handling.

---
 sound/soc/tegra/tegra20_das.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
#3 lore raw

PATCH 2/4 ASoC: tegra: tegra210_adx: Return the original error directly

In reply to [email protected]

From: bui duc phuc <[email protected]>

snd_soc_add_component_controls() already reports failures internally. Return its error code directly instead of logging the error again in the component probe callback. Also remove the now unnecessary local error variable.

---
 sound/soc/tegra/tegra210_adx.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
sound/soc/tegra/tegra210_adx.c +4 -8
index 15a94196ee1a..e75bf50f8fb0 100644
@@ -496,16 +496,12 @@ static struct snd_kcontrol_new tegra264_adx_controls[] = {
 static int tegra210_adx_component_probe(struct snd_soc_component *component)
 {
 	struct tegra210_adx *adx = snd_soc_component_get_drvdata(component);
-	int err = 0;
 
-	if (adx->soc_data->num_controls) {
-		err = snd_soc_add_component_controls(component, adx->soc_data->controls,
-						     adx->soc_data->num_controls);
-		if (err)
-			dev_err(component->dev, "can't add ADX controls, err: %d\n", err);
-	}
+	if (adx->soc_data->num_controls)
+		return snd_soc_add_component_controls(component, adx->soc_data->controls,
+						      adx->soc_data->num_controls);
 
-	return err;
+	return 0;
 }
 
 static const struct snd_soc_component_driver tegra210_adx_cmpnt = {
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 2/4
#4 lore raw

Re: [PATCH 2/4] ASoC: tegra: tegra210_adx: Return the original error directly

Quoted 11 lines · On Wed, Jul 15, 2026 at 12:11:13PM +0700, [email protected] wrote:

From: bui duc phuc <[email protected]>

snd_soc_add_component_controls() already reports failures internally. Return its error code directly instead of logging the error again in the component probe callback. Also remove the now unnecessary local error variable.

---
 sound/soc/tegra/tegra210_adx.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
#5 lore raw

PATCH 3/4 ASoC: tegra: tegra210_amx: Return the original error directly

In reply to [email protected]

From: bui duc phuc <[email protected]>

snd_soc_add_component_controls() already reports failures internally. Return its error code directly instead of logging the error again in the component probe callback. Also remove the now unnecessary local error variable.

---
 sound/soc/tegra/tegra210_amx.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
sound/soc/tegra/tegra210_amx.c +4 -8
index cc1f9c158191..6a67ce6128b4 100644
@@ -504,16 +504,12 @@ static struct snd_kcontrol_new tegra264_amx_controls[] = {
 static int tegra210_amx_component_probe(struct snd_soc_component *component)
 {
 	struct tegra210_amx *amx = snd_soc_component_get_drvdata(component);
-	int err = 0;
 
-	if (amx->soc_data->num_controls) {
-		err = snd_soc_add_component_controls(component, amx->soc_data->controls,
-						     amx->soc_data->num_controls);
-		if (err)
-			dev_err(component->dev, "can't add AMX controls, err: %d\n", err);
-	}
+	if (amx->soc_data->num_controls)
+		return snd_soc_add_component_controls(component, amx->soc_data->controls,
+						      amx->soc_data->num_controls);
 
-	return err;
+	return 0;
 }
 
 static const struct snd_soc_component_driver tegra210_amx_cmpnt = {
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 3/4
#6 lore raw

Re: [PATCH 3/4] ASoC: tegra: tegra210_amx: Return the original error directly

Quoted 11 lines · On Wed, Jul 15, 2026 at 12:11:14PM +0700, [email protected] wrote:

From: bui duc phuc <[email protected]>

snd_soc_add_component_controls() already reports failures internally. Return its error code directly instead of logging the error again in the component probe callback. Also remove the now unnecessary local error variable.

---
 sound/soc/tegra/tegra210_amx.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

I suppose this could've been merged with the prior patch since it does effectively the same thing. In either case:

#7 lore raw

PATCH 4/4 ASoC: tegra: tegra210: Use devm_clk_get_optional() for sync_input clock

In reply to [email protected]

From: bui duc phuc <[email protected]>

The existing comment states that the sync_input clock is only needed when another I/O is configured to use the current I2S instance as its input clock, and the current code does not treat its absence as an error.
Use devm_clk_get_optional() to match the existing behaviour while still reporting real failures via dev_err_probe(). Update the comment to describe the optional nature of the clock rather than the previous error handling.

---
 sound/soc/tegra/tegra210_i2s.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
sound/soc/tegra/tegra210_i2s.c +5 -5
index ff8c72fc38c5..e7e26e917291 100644
@@ -1078,13 +1078,13 @@ static int tegra210_i2s_probe(struct platform_device *pdev)
 				     "can't retrieve I2S bit clock\n");
 
 	/*
-	 * Not an error, as this clock is needed only when some other I/O
-	 * requires input clock from current I2S instance, which is
-	 * configurable from DT.
+	 * This clock is optional and is only needed when another I/O uses
+	 * the current I2S instance as its input clock, as configured in DT.
 	 */
-	i2s->clk_sync_input = devm_clk_get(dev, "sync_input");
+	i2s->clk_sync_input = devm_clk_get_optional(dev, "sync_input");
 	if (IS_ERR(i2s->clk_sync_input))
-		dev_dbg(dev, "can't retrieve I2S sync input clock\n");
+		return dev_err_probe(dev, PTR_ERR(i2s->clk_sync_input),
+				     "can't retrieve I2S sync input clock\n");
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 4/4
#8 lore raw

Re: [PATCH 4/4] ASoC: tegra: tegra210: Use devm_clk_get_optional() for sync_input clock

Quoted 11 lines · On Wed, Jul 15, 2026 at 12:11:15PM +0700, [email protected] wrote:

From: bui duc phuc <[email protected]>

The existing comment states that the sync_input clock is only needed when another I/O is configured to use the current I2S instance as its input clock, and the current code does not treat its absence as an error.
Use devm_clk_get_optional() to match the existing behaviour while still reporting real failures via dev_err_probe(). Update the comment to describe the optional nature of the clock rather than the previous error handling.

Quoted 4 lines
---
 sound/soc/tegra/tegra210_i2s.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
maintainer
#9 lore raw
In reply to [email protected]
Quoted 4 lines · On Wed, 15 Jul 2026 12:11:11 +0700, [email protected] wrote:

ASoC: tegra: Simplify error handling

From: bui duc phuc <[email protected]>

Quoted 8 lines

Hi all,

This series contains a few small cleanups for the Tegra ASoC drivers.
- Use dev_err_probe() for regmap initialization failures.
- Return the original error from snd_soc_add_component_controls().
- Use devm_clk_get_optional() for the optional sync_input clock.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.3

Thanks!

[1/4] ASoC: tegra: tegra20_das: Use dev_err_probe() for error handling

      https://git.kernel.org/broonie/sound/c/70d0d7b24d86
[2/4] ASoC: tegra: tegra210_adx: Return the original error directly
      https://git.kernel.org/broonie/sound/c/b82384bffb27
[3/4] ASoC: tegra: tegra210_amx: Return the original error directly
      https://git.kernel.org/broonie/sound/c/f7cbc51424cd
[4/4] ASoC: tegra: tegra210: Use devm_clk_get_optional() for sync_input clock
      https://git.kernel.org/broonie/sound/c/226791fa6dbb

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark