Skip to contentSkip to conversation

Adapting old i830 driver to recognize Pineview

DISCUSSION [email protected] 2 participants 2 messages Jun 8, 2010

lore
Share & tools
lore
#0 lore raw

Hi all,
We are developing pro audio gear based on an Intel Atom board which uses
the Pineview G chipset. Unfortunately, our OS is based on Fedora 8 which only has X.org 1.3.0. I was wondering if anyone knew whether it would be feasible to alter FC8's xf86-video-i810-1.6.5 and xf86-video-intel-2.1.1 drivers to be able to detect and use the Pineview chipset rather than falling back to VESA. And, if so, what would be involved? The goal is not 3d acceleration but rather just widescreen video resolution support.

Cheers,
Louis

#1 lore raw

Hi Luis,

Quoted 9 lines · On Tue, 8 Jun 2010, [email protected] wrote:

Hi all,
We are developing pro audio gear based on an Intel Atom board which uses
the Pineview G chipset. Unfortunately, our OS is based on Fedora 8 which only has X.org 1.3.0. I was wondering if anyone knew whether it would be feasible to alter FC8's xf86-video-i810-1.6.5 and xf86-video-intel-2.1.1 drivers to be able to detect and use the Pineview chipset rather than falling back to VESA. And, if so, what would be involved? The goal is not 3d acceleration but rather just widescreen video resolution support.

I've been doing exactly this (pro audio, Intel N450), but with Ubuntu/Jaunty.

My Xorg isn't /that/ old... but I was able to get it accomplished for 1.6.0 like this (in reverse order :-)):

* I backported xf86-video-intel 2.9.x. (If
you do >= 2.10.x, you will need a kernel
>= 2.6.32.)

* In backporting the driver, I had to re-enable
some scheme where the xserver looks up PCI
ID numbers to pick the driver.

* Backporting xf86-video-intel required me
to backport libdrm, first. Which also
required me to backport some other Xorg
libs like xcb, xvmc.

* Because linux-libc-dev supplied the headers
for drm, but I needed up-to-date DRM headers
for xf86-video-intel. So, I had to package
my own kernel and linux-libc-dev with the
drm headers removed (and provided by libdrm).
This is actually common practice today, but
wasn't back then.

All in all, it was a pretty painful process... but I didn't have to rebuild the entire Xorg system. :-)

FYI, with a kernel >=2.6.32, I had problems with the boot-splash theme... and you /must/ enable kernel modesetting.

HTH,
Gabriel