couple questions about kernel dev manual, section 2
some oddities in section 2.2.1 of the current kernel dev manual.
first, there's:
"The append file should initially contain the following text:
FILESEXTRAPATHS := "${THISDIR}/${PN}"i was under the impression that the standard line would be:
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"would it not? to make sure you can support potential layers on top of layers, no? if you absolutely *know* that won't happen, then, sure, that will work, but i think the wording above is unnecessarily restrictive.
also, right underneath that, one reads:
"If you add any new files that modify the kernel recipe, you need to place them in your layer in the following area:
<your-layer>/recipes-kernel/linux/linux-yocto/"
IIRC, you *can* put them there but you don't *need* to. in fact, tom zanussi's kernel labs place extra files simply under a "files/" subdirectory (after setting FILESEXTRAPATHS to pick up that directory). so, again, some wording that is unnecessarily strong and somewhat misleading.
thoughts?
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 7 lines · Robert P. J. Day
some oddities in section 2.2.1 of the current kernel dev manual. first, there's:
"The append file should initially contain the following text:
FILESEXTRAPATHS := "${THISDIR}/${PN}"
Quoted 9 lines
i was under the impression that the standard line would be:
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"would it not? to make sure you can support potential layers on top of layers, no? if you absolutely *know* that won't happen, then, sure, that will work, but i think the wording above is unnecessarily restrictive.
Right, that should be changed to match the recommendation in the Poky Reference manual.
Quoted 7 lines
also, right underneath that, one reads:
"If you add any new files that modify the kernel recipe, you need to place them in your layer in the following area:
<your-layer>/recipes-kernel/linux/linux-yocto/"
Quoted 8 lines
IIRC, you *can* put them there but you don't *need* to. in fact, tom zanussi's kernel labs place extra files simply under a "files/" subdirectory (after setting FILESEXTRAPATHS to pick up that directory). so, again, some wording that is unnecessarily strong and somewhat misleading.
thoughts?
That text assumes you've used (the corrected) from the paragraph above:
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
which means you do need to put the files in the linux-yocto/ subdir (for a linux-yocto bbappend), since we're dealing with a .bbappend here.
If we were talking about a recipe, then yes, we wouldn't *need* to put them there but could also put them in any of the default subdirs such as files/. There's a little more discussion about it here:
https://lists.yoctoproject.org/pipermail/yocto/2013-February/014419.html
Seems like it might be good to explicitly explain all this or at least point out the difference and help avoid the confusion...
Tom
Quoted 2 lines
rday
Quoted 33 lines · Tom Zanussi
Quoted 7 lines · Robert P. J. Day
some oddities in section 2.2.1 of the current kernel dev manual. first, there's:
"The append file should initially contain the following text:
FILESEXTRAPATHS := "${THISDIR}/${PN}"Quoted 8 lines
i was under the impression that the standard line would be:
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"would it not? to make sure you can support potential layers on top of layers, no? if you absolutely *know* that won't happen, then, sure, that will work, but i think the wording above is unnecessarily restrictive.
Right, that should be changed to match the recommendation in the Poky Reference manual.
Quoted 13 lines
also, right underneath that, one reads:
"If you add any new files that modify the kernel recipe, you need to place them in your layer in the following area:
<your-layer>/recipes-kernel/linux/linux-yocto/"
IIRC, you *can* put them there but you don't *need* to. in fact, tom zanussi's kernel labs place extra files simply under a "files/" subdirectory (after setting FILESEXTRAPATHS to pick up that directory). so, again, some wording that is unnecessarily strong and somewhat misleading.
Quoted 6 lines
Quoted 2 lines
thoughts?
That text assumes you've used (the corrected) from the paragraph above:
FILESEXTRAPATHS_prepend:= "${THISDIR}/${PN}:"
that may be true, but it's not clear from the text that that claim
is based on the earlier (corrected) setting. i just get itchy when i see inappropriately strong claims.
Quoted 11 lines
which means you do need to put the files in the linux-yocto/ subdir (for a linux-yocto bbappend), since we're dealing with a .bbappend here.
If we were talking about a recipe, then yes, we wouldn't *need* to put them there but could also put them in any of the default subdirs such as files/. There's a little more discussion about it here:
https://lists.yoctoproject.org/pipermail/yocto/2013-February/014419.html
Seems like it might be good to explicitly explain all this or at least point out the difference and help avoid the confusion...
once upon a time, i dug into this whole FILESEXTRAPATHS issue and i
was surprised to find how it worked, which i documented:
http://www.crashcourse.ca/wiki/index.php/FILESEXTRAPATHS_and_bbappend_files
it may be that i have to revisit that to make sure that page is up to date, but i don't think any of the documentation makes it abundantly clear how FILESEXTRAPATHS truly works -- that it adds an entire *set* of additional directories to FILESPATH:
certainly, the variable glossary doesn't seem to mention that:
http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-FILESEXTRAPATHS
unless, of course, i've misunderstood this completely.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================I updated the section http://www.yoctoproject.org/docs/1.5/kernel-dev/kernel-dev.html#creating-the-append-file to better word this situation and to use the proper FILESEXTRAPATHS example with "_prepend".
Thanks,
Scott
Quoted 108 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Robert P. J. Day
Sent: Saturday, April 13, 2013 1:39 PM
To: Zanussi, Tom
Cc: Yocto discussion list
Subject: Re: [yocto] couple questions about kernel dev manual, section 2Quoted 6 lines · Tom Zanussi
Quoted 5 lines · Robert P. J. Day
some oddities in section 2.2.1 of the current kernel dev manual. first, there's:
"The append file should initially contain the following text:
Quoted 7 lines
Quoted 7 lines
FILESEXTRAPATHS := "${THISDIR}/${PN}"i was under the impression that the standard line would be:
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"would it not? to make sure you can support potential layers on top
of
Quoted 20 lines
Quoted 3 lines
layers, no? if you absolutely *know* that won't happen, then, sure, that will work, but i think the wording above is unnecessarily restrictive.
Right, that should be changed to match the recommendation in the Poky Reference manual.
Quoted 13 lines
also, right underneath that, one reads:
"If you add any new files that modify the kernel recipe, you need to place them in your layer in the following area:
<your-layer>/recipes-kernel/linux/linux-yocto/"
IIRC, you *can* put them there but you don't *need* to. in fact, tom zanussi's kernel labs place extra files simply under a "files/" subdirectory (after setting FILESEXTRAPATHS to pick up that directory). so, again, some wording that is unnecessarily strong and somewhat misleading.
Quoted 4 lines
Quoted 2 lines
thoughts?
That text assumes you've used (the corrected) from the paragraph
above:
Quoted 2 lines
FILESEXTRAPATHS_prepend:= "${THISDIR}/${PN}:"that may be true, but it's not clear from the text that that claim
is based on the earlier (corrected) setting. i just get itchy when i see inappropriately strong claims.Quoted 1 line
which means you do need to put the files in the linux-yocto/ subdir
(for
Quoted 4 lines
a linux-yocto bbappend), since we're dealing with a .bbappend here.
If we were talking about a recipe, then yes, we wouldn't *need* to put them there but could also put them in any of the default subdirs such
as
Quoted 3 lines
files/. There's a little more discussion about it here:
February/014419.html
Quoted 3 lines
Seems like it might be good to explicitly explain all this or at least point out the difference and help avoid the confusion...
once upon a time, i dug into this whole FILESEXTRAPATHS issue and i
was surprised to find how it worked, which i documented:http://www.crashcourse.ca/wiki/index.php/FILESEXTRAPATHS_and_bbappend_fi
lesit may be that i have to revisit that to make sure that page is up to date, but i don't think any of the documentation makes it abundantly clear how FILESEXTRAPATHS truly works -- that it adds an entire *set* of additional directories to FILESPATH:
http://www.crashcourse.ca/wiki/index.php/FILESEXTRAPATHS_and_bbappend_fi
les#Examining_FILESPATH.2C_and_how_FILESEXTRAPATHS_workscertainly, the variable glossary doesn't seem to mention that:
http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-
FILESEXTRAPATHSunless, of course, i've misunderstood this completely.
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday========================================================================
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto