Skip to contentSkip to conversation

linux-next: Tree for May 1

PATCH In review Stephen Rothwell 13 participants 31 messages May 1, 2013 – May 6, 2013

Subsystems (7)
Media (V4L/DVB) SCSI Staging Kbuild +3 more subsystems
lore
Share & tools
lore
#0 lore raw

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

The nfsd tree lost its build failure.

The xfs tree lost its build failure.

The vfs tree gained conflicts against Linus' and the powerpc trees and gained a build failure for which I applied a merge fix patch.

The drm-intel tree gained a conflict against the drm tree.

The block tree gained a conflict against Linus' tree.

The arm-soc tree gained a conflict against the arm tree.

The akpm tree lost a lot of patches that turned up elsewhere.

----------------------------------------------------------------------------

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).

You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc, sparc64 and arm defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.

Below is a summary of the state of the merge.

We are up to 224 trees (counting Linus' and 31 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.

Thanks to Randy Dunlap for doing many randconfig builds. And to Paul Gortmaker for triage and bug fixes.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.

Signature · 602 lines
Cheers,
Stephen Rothwell                    [email protected]

$ git checkout master
$ git reset --hard stable
Merging origin/master (3094566 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial)
Merging fixes/master (96d8683 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client)
Merging kbuild-current/rc-fixes (a54292f kbuild: generate generic headers before recursing into scripts)
Merging arc-current/for-curr (561daec ARC: [mm] Lazy D-cache flush (non aliasing VIPT))
Merging arm-current/fixes (1783d45 ARM: 7700/2: Make cpu_init() notrace)
Merging m68k-current/for-linus (e00c73e m68k: Remove inline strlen() implementation)
Merging powerpc-merge/merge (5676005 powerpc/pseries/lparcfg: Fix possible overflow are more than 1026)
Merging sparc/master (0fbd067 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc)
Merging net/master (79f632c unix/stream: fix peeking with an offset larger than data in queue)
Merging ipsec/master (da241ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net)
Merging sound-current/for-linus (c5a4698 Merge tag 'asoc-maintainers-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus)
Merging pci-current/for-linus (d46fc8b x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0)
Merging wireless/master (a8a48e6 Merge tag 'nfc-next-3.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next)
Merging driver-core.current/driver-core-linus (c1be5a5 Linux 3.9)
Merging tty.current/tty-linus (c1be5a5 Linux 3.9)
Merging usb.current/usb-linus (c1be5a5 Linux 3.9)
Merging staging.current/staging-linus (c1be5a5 Linux 3.9)
Merging char-misc.current/char-misc-linus (c1be5a5 Linux 3.9)
Merging input-current/for-linus (5846115 Input: wacom - fix "can not retrieve extra class descriptor" for DTH2242)
Merging md-current/for-linus (32f9f57 MD: ignore discard request for hard disks of hybid raid1/raid10 array)
Merging audit-current/for-linus (c158a35 audit: no leading space in audit_log_d_path prefix)
Merging crypto-current/master (72a763d crypto: algif - suppress sending source address information in recvmsg)
Merging ide/master (bf6b438 ide: gayle: use module_platform_driver_probe())
Merging dwmw2/master (5950f08 pcmcia: remove RPX board stuff)
Merging sh-current/sh-fixes-for-linus (4403310 SH: Convert out[bwl] macros to inline functions)
Merging irqdomain-current/irqdomain/merge (a0d271c Linux 3.6)
Merging devicetree-current/devicetree/merge (ab28698 of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS)
Merging spi-current/spi/merge (0d2d0cc spi/davinci: fix module build error)
Merging gpio-current/gpio/merge (e97f9b5 gpio/gpio-ich: fix ichx_gpio_check_available() return what callers expect)
Merging rr-fixes/fixes (c1be5a5 Linux 3.9)
Merging mfd-fixes/master (31880c3 Linux 3.9-rc6)
Merging vfio-fixes/for-linus (904c680 vfio-pci: Fix possible integer overflow)
Merging asm-generic/master (fb9de7e xtensa: Use generic asm/mmu.h for nommu)
Merging arc/for-next (07961ac Linux 3.9-rc5)
Merging arm/for-next (4b6cce6 Merge branches 'devel-stable', 'entry', 'fixes', 'mach-types', 'misc' and 'smp-hotplug' into for-next)
CONFLICT (content): Merge conflict in arch/arm/kvm/arm.c
Merging arm-perf/for-next/perf (ab87304 Merge branches 'perf/fixes' and 'hw-breakpoint' into for-next/perf)
Merging davinci/davinci-next (fe0d422 Linux 3.0-rc6)
Merging xilinx/arm-next (64e3fd3 arm: zynq: Add support for pmu)
CONFLICT (content): Merge conflict in drivers/clocksource/Makefile
Merging arm64/upstream (16c85a1 arm64: Use acquire/release semantics instead of explicit DMB)
Merging blackfin/for-linus (f656c24 blackfin: time-ts: Remove duplicate assignment)
Merging c6x/for-linux-next (f934af0 add memory barrier to arch_local_irq_restore)
Merging cris/for-next (32ade6a CRIS: Add kvm_para.h which includes generic file)
Merging hexagon/linux-next (e0e34de Hexagon: add v4 CS regs to core copyout macro)
Merging ia64/next (797f6a6 Add size restriction to the kdump documentation)
Merging m68k/for-next (e00c73e m68k: Remove inline strlen() implementation)
Merging m68knommu/for-next (2842e5b0 m68knommu: enable Timer on coldfire 532x)
Merging metag/for-next (164c013 metag: defconfigs: increase log buffer 8KiB => 128KiB)
Merging microblaze/next (01cc2cb microblaze: intc: set the default irq_domain)
Merging mips/mips-for-linux-next (6eac6e6 Merge branches 'next/3.9-fixes', 'next/kvm' and 'next/micromips' into mips-for-linux-next)
Merging openrisc/for-upstream (6af6095 openrisc: remove HAVE_VIRT_TO_BUS)
Merging parisc/for-next (6c700d7 [PARISC] hpux: Remove obsolete regs parameter from do_execve() in hpux_execve())
Merging powerpc/next (1f6aaac powerpc: Update tlbie/tlbiel as per ISA doc)
CONFLICT (content): Merge conflict in arch/powerpc/mm/numa.c
CONFLICT (content): Merge conflict in arch/metag/mm/Kconfig
Merging 4xx/next (2074b1d powerpc: Fix irq distribution)
Merging mpc5xxx/next (fdeaf0e powerpc/512x: add ifm ac14xx board)
Merging galak/next (9e2ecdb powerpc/fsl-booke: add the reg prop for pci bridge device node for T4/B4)
Merging s390/features (1c21351 s390/pci: use pci_scan_root_bus)
Merging sh/sh-latest (37284bd Merge branches 'sh/hw-breakpoints' and 'sh/serial-of' into sh-latest)
Merging sparc-next/master (07df841 sparc64: Do not save/restore interrupts in get_new_mmu_context())
Merging tile/master (9fc1894 arch/tile: Fix syscall return value passed to tracepoint)
Merging unicore32/unicore32 (c284464 arch/unicore32: remove CONFIG_EXPERIMENTAL)
Merging xtensa/for_next (4e34bf6 xtensa: provide default platform_pcibios_init implementation)
Merging btrfs/next (6aec51f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into for-linus-3.9)
Merging ceph/testing (1de1777 rbd: refactor rbd_dev_probe_update_spec())
CONFLICT (content): Merge conflict in net/ceph/osdmap.c
CONFLICT (content): Merge conflict in fs/ceph/addr.c
CONFLICT (content): Merge conflict in drivers/block/rbd.c
Merging cifs/for-next (bf81710 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending)
Merging configfs/linux-next (b930c26 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs)
Merging ecryptfs/next (f6161aa Linux 3.9-rc2)
Merging ext3/for_next (e162b2f jbd: use kmem_cache_zalloc instead of kmem_cache_alloc/memset)
Merging ext4/dev (0d606e2 ext4: fix type-widening bug in inode table readahead code)
Merging f2fs/dev (d23bfc6 f2fs: avoid deadlock during evict after f2fs_gc)
Merging fuse/for-next (efb9fa9 fuse: truncate file if async dio failed)
Merging gfs2/master (222cb53 GFS2: Flush work queue before clearing glock hash tables)
Merging jfs/jfs-next (9d48017 jfs: avoid undefined behavior from left-shifting by 32 bits)
Merging logfs/master (3394661 Fix the call to BUG() caused by no free segment found)
Merging nfs/linux-next (8dbec78 NFSv4.x: Fix handling of partially delegated locks)
Merging nfsd/nfsd-next (d28fcc8 svcrpc: fix gss-proxy to respect user namespaces)
Merging ocfs2/linux-next (4538df6 ocfs2: Don't spam on -EDQUOT.)
Merging omfs/for-next (976d167 Linux 3.1-rc9)
Merging squashfs/master (4b0180a Squashfs: add mount time sanity check for block_size and block_log match)
Merging v9fs/for-next (b6f4bee fs/9p: Fix atomic_open)
Merging ubifs/linux-next (c1be5a5 Linux 3.9)
Merging xfs/for-next (123887e xfs: Teach dquot recovery about CONFIG_XFS_QUOTA)
CONFLICT (content): Merge conflict in fs/xfs/xfs_iomap.c
Merging vfs/for-next (3c3a685 minimal !CONFIG_PROC_FS fixes)
CONFLICT (content): Merge conflict in fs/proc/internal.h
CONFLICT (content): Merge conflict in drivers/staging/vt6655/device_main.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_specproc.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_ports_ops.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_net_ops.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_mon_ops.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_dpa_ops.c
CONFLICT (modify/delete): drivers/staging/ccg/rndis.c deleted in HEAD and modified in vfs/for-next. Version vfs/for-next of drivers/staging/ccg/rndis.c left in tree.
CONFLICT (modify/delete): drivers/staging/ccg/f_fs.c deleted in HEAD and modified in vfs/for-next. Version vfs/for-next of drivers/staging/ccg/f_fs.c left in tree.
CONFLICT (content): Merge conflict in drivers/firmware/efivars.c
CONFLICT (content): Merge conflict in arch/powerpc/kernel/rtas_flash.c
$ git rm -f drivers/staging/ccg/f_fs.c drivers/staging/ccg/rndis.c
Applying: fs: fix up for changes to proc_fs include files
Applying: SUNRPC: update for PDE removal
Merging pci/next (d4f09c5 Merge branch 'pci/gavin-msi-cleanup' into next)
Merging hid/for-next (46b1897 Merge branch 'for-3.10/hid-debug' into for-next)
Merging i2c/i2c/for-next (c39e8e4 i2c: xiic: must always write 16-bit words to TX_FIFO)
CONFLICT (content): Merge conflict in drivers/staging/media/go7007/go7007-driver.c
CONFLICT (content): Merge conflict in drivers/media/pci/bt8xx/bttv-input.c
Applying: i2c: fixup for code movement from bttv_input.c
Merging jdelvare-hwmon/master (c662b7a hwmon: (lm75) Add support for the Dallas/Maxim DS7505)
Merging hwmon-staging/hwmon-next (6445e66 hwmon: (nct6775) Fix coding style problems)
Merging v4l-dvb/master (1d62caa Merge /home/v4l/v4l/patchwork)
Merging kbuild/for-next (1567364 Merge branch 'kbuild/kconfig' into kbuild/for-next)
Merging kconfig/for-next (4eae518 localmodconfig: Fix localyesconfig to set to 'y' not 'm')
Merging libata/NEXT (2cc1144 sata_highbank: Rename proc_name to the module name)
Merging infiniband/for-next (f1258ea Merge branches 'misc' and 'mlx4' into for-next)
Merging pstore/master (bd08ec3 pstore/ram: Restore ecc information block)
Merging pm/linux-next (371deb9 Merge branch 'pm-cpufreq')
CONFLICT (content): Merge conflict in include/linux/clockchips.h
CONFLICT (content): Merge conflict in drivers/acpi/scan.c
Merging idle/next (5c99726b Merge branch 'fspin' into next)
Merging apm/for-next (fb9d78a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm)
Merging cpuidle/cpuidle-next (817c876 Merge branch 'pm-fixes-next' into fixes-next)
CONFLICT (content): Merge conflict in drivers/base/power/qos.c
Merging cpupowerutils/master (f166033 cpupower tools: add install target to the debug tools' makefiles)
Merging thermal/next (de6558d Merge branch 'MAINTAINERS-update' of .git into next)
Merging ieee1394/for-next (6fe9efb firewire: ohci: dump_stack() for PHY regs read/write failures)
Merging ubi/linux-next (f6161aa Linux 3.9-rc2)
Merging dlm/next (9000831 dlm: avoid unnecessary posix unlock)
Merging swiotlb/linux-next (af51a9f swiotlb: Do not export swiotlb_bounce since there are no external consumers)
Merging scsi/for-next (73b22ec Merge branch 'misc' into for-next)
Merging target-updates/for-next (04b59ba tcm_vhost: Enable VIRTIO_SCSI_F_HOTPLUG)
Merging target-merge/for-next-merge (b8d26b3 iser-target: Add iSCSI Extensions for RDMA (iSER) target driver)
Merging ibft/linux-next (935a9fe ibft: Fix finding IBFT ACPI table on UEFI)
Merging isci/all (6734092 isci: add a couple __iomem annotations)
Merging slave-dma/next (0b03930 Merge branch 'for-linus' into next)
Merging dmaengine/next (41ef2d5 Linux 3.9-rc7)
Merging net-next/master (fe86d71 mlx4_en: fix a build error on 32bit arches)
CONFLICT (content): Merge conflict in tools/Makefile
CONFLICT (content): Merge conflict in include/linux/pci.h
CONFLICT (content): Merge conflict in drivers/infiniband/hw/cxgb4/qp.c
Applying: drivers:net: fix up for code movement from rt2x00pci.c
Merging ipsec-next/master (05600a7 xfrm_user: constify netlink dispatch table)
Merging wireless-next/master (a8a48e6 Merge tag 'nfc-next-3.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next)
Merging bluetooth/master (975aba3 Bluetooth: Fix multiple LE socket handling)
Merging mtd/master (cdb6404 mtd: omap2: Use module_platform_driver())
Merging l2-mtd/master (98927a2 mtd: get the ECC info from the parameter page for ONFI nand)
Merging crypto/master (3862de1 crypto: caam - fix job ring cleanup code)
Merging drm/drm-next (33896bf udl: bind the framebuffer to the correct device.)
Merging drm-intel/drm-intel-next-queued (dce3271 drm/i915: reference count for i915_hw_contexts)
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_reg.h
Merging sound/for-next (4ca231b ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch)
Merging sound-asoc/for-next (615973d Merge remote-tracking branch 'asoc/fix/wm8994' into asoc-linus)
Merging modules/modules-next (a53a11f3 modpost: fix unwanted VMLINUX_SYMBOL_STR expansion)
Merging virtio/virtio-next (c2ecd51 lguest: improve code readability in lg_cpu_start.)
CONFLICT (content): Merge conflict in drivers/char/virtio_console.c
CONFLICT (modify/delete): Documentation/virtual/virtio-spec.txt deleted in virtio/virtio-next and modified in HEAD. Version HEAD of Documentation/virtual/virtio-spec.txt left in tree.
$ git rm -f Documentation/virtual/virtio-spec.txt
Merging input/next (0c6a616 Input: trackpoint - Optimize trackpoint init to use power-on reset)
Merging input-mt/for-next (194664e Input: MT - handle semi-mt devices in core)
Merging cgroup/for-next (2a0010a cpuset: fix compile warning when CONFIG_SMP=n)
Merging block/for-next (b5bb021 Merge branch 'for-3.10/core' into for-next)
CONFLICT (content): Merge conflict in include/linux/blk_types.h
CONFLICT (content): Merge conflict in drivers/block/drbd/drbd_proc.c
Merging device-mapper/master (f8efabf This patch uses memalloc_noio_save to avoid a possible deadlock in dm-bufio.  (it could happen only with large block size, at most PAGE_SIZE << MAX_ORDER (typically 8MiB).)
Merging embedded/master (4744b43 embedded: fix vc_translate operator precedence)
Merging firmware/master (6e03a20 firmware: speed up request_firmware(), v3)
Merging pcmcia/master (80af9e6 pcmcia at91_cf: fix raw gpio number usage)
Merging mmc/mmc-next (e4404fa mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE)
Merging kgdb/kgdb-next (6bedf31 kdb: Remove unhandled ssb command)
Merging slab/for-next (7cccd80 slub: tid must be retrieved from the percpu area of the current processor)
Merging uclinux/for-next (6dbe51c Linux 3.9-rc1)
Merging md/for-next (1fef8be raid5: make release_stripe lockless)
Merging mfd/master (99f4c6b mfd: si476x: Don't use 0bNNN)
CONFLICT (content): Merge conflict in drivers/mfd/Kconfig
CONFLICT (content): Merge conflict in arch/arm/mach-ux500/cpuidle.c
Merging battery/master (6b17080 pm2301-charger: Fix suspend/resume)
Merging fbdev/fbdev-next (a49f0d1 Linux 3.8-rc1)
Merging viafb/viafb-next (838ac78 viafb: avoid refresh and mode lookup in set_par)
Merging omap_dss2/for-next (e72b753 fbdev/ps3fb: fix compile warning)
Merging regulator/for-next (bee5465 Merge remote-tracking branch 'regulator/topic/wm8994' into v3.9-rc8)
Merging security/next (b7ae9f0 Merge branch 'tpmdd-04-17-13' of git://github.com/shpedoikal/linux into my-next)
Merging selinux/master (c2d7b24 Merge tag 'v3.4' into 20120409)
Merging lblnet/master (7e27d6e Linux 2.6.35-rc3)
Merging watchdog/master (69c6612 watchdog: Fix race condition in registration code)
Merging dwmw2-iommu/master (6491d4d intel-iommu: Free old page tables before creating superpage)
Merging iommu/next (d4df35e2 Merge branches 'iommu/fixes', 'x86/vt-d', 'x86/amd', 'ppc/pamu' and 'core' into next)
Merging vfio/next (0b43c08 vfio: Use down_reads to protect iommu disconnects)
Merging osd/linux-next (861d666 exofs: don't leak io_state and pages on read error)
Merging jc_docs/docs-next (5c050fb docs: update the development process document)
Merging trivial/for-next (071361d mm: Convert print_symbol to %pSR)
Merging audit/for-next (dcd6c92 Linux 3.3-rc1)
Merging fsnotify/for-next (1ca39ab inotify: automatically restart syscalls)
Merging edac/linux_next (de4772c edac: sb_edac.c should not require prescence of IMC_DDRIO device)
Merging edac-amd/for-next (9713fae EDAC: Merge mci.mem_is_per_rank with mci.csbased)
Merging devicetree/devicetree/next (d347bc5 Merge branch 'robherring/for-next' from git://sources.calxeda.com/kernel/linux.git)
Merging dt-rh/for-next (a2b9ea7 Documentation/devicetree: make semantic of initrd-end more explicit)
Merging spi/spi/next (00ab539 spi/s3c64xx: let device core setup the default pin configuration)
Merging spi-mb/for-next (cd8d984 spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items)
Merging tip/auto-latest (979830a Merge branch 'x86/urgent')
CONFLICT (modify/delete): drivers/firmware/efivars.c deleted in tip/auto-latest and modified in HEAD. Version HEAD of drivers/firmware/efivars.c left in tree.
$ git rm -f drivers/firmware/efivars.c
Applying: efivars: Include missing linux/magic.h inclusions
Applying: efivars: use of kmalloc etc requires the inclusion of slab.h
Merging ftrace/for-next (4c69e6e tracepoints: Prevent null probe from being added)
Merging rcu/rcu/next (a9be854 Merge commit '6d87669357936bffa1e8fea7a4e7743e76905736' into next.2013.10.22a)
Merging cputime/cputime (c3e0ef9 [S390] fix cputime overflow in uptime_proc_show)
Merging uprobes/for-next (0326f5a uprobes/core: Handle breakpoint and singlestep exceptions)
Merging kvm/linux-next (4cee4b7 kvm: KVM_CAP_IOMMU only available with device assignment)
CONFLICT (content): Merge conflict in drivers/s390/kvm/virtio_ccw.c
CONFLICT (content): Merge conflict in arch/s390/mm/pgtable.c
Merging kvm-arm/kvm-arm-next (b8022d7 arm: kvm: arch_timer: use symbolic constants)
Merging kvm-ppc/kvm-ppc-next (8b78645 KVM: PPC: Book3S: Facilities to save/restore XICS presentation ctrler state)
Merging oprofile/for-next (23995bb oprofile, s390: Add support for IBM zEnterprise EC12)
Merging fw-nohz/nohz/next (74876a9 printk: Wake up klogd using irq_work)
Merging xen/upstream/xen (af3a3ab Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes)
Merging xen-two/linux-next (6461b07 Merge branch 'stable/for-linus-3.10' into linux-next)
Merging xen-arm/linux-next (9bc25a1 xen/arm: remove duplicated include from enlighten.c)
Merging percpu/for-next (a1b2a55 percpu: add documentation on this_cpu operations)
Merging workqueues/for-next (46aed11 Merge branch 'for-3.10' into for-next)
Merging drivers-x86/linux-next (e6e5224 ideapad-laptop: Depend on BACKLIGHT_CLASS_DEVICE instead of selecting it)
CONFLICT (content): Merge conflict in drivers/platform/x86/chromeos_laptop.c
Merging hwpoison/hwpoison (46e387b Merge branch 'hwpoison-hugepages' into hwpoison)
Merging sysctl/master (4e474a0 sysctl: protect poll() in entries that may go away)
Merging regmap/for-next (38a8179 Merge remote-tracking branch 'regmap/topic/range' into regmap-next)
Merging hsi/for-next (43139a6 HSI: hsi_char: Update ioctl-number.txt)
Merging leds/for-next (df92d5f leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS)
Merging driver-core/driver-core-next (0d1d392 Merge 3.9-rc7 into driver-core-next)
Merging tty/tty-next (45efcb2 tty/serial/sirf: fix MODULE_DEVICE_TABLE)
Merging usb/usb-next (4626b8d USB: ehci-msm: USB_MSM_OTG needs USB_PHY)
Merging usb-gadget/next (added5f ARM: mxs_defconfig: add CONFIG_USB_PHY)
Merging staging/staging-next (a0eeed4 staging: comedi: ni_labpc: fix legacy driver build)
Merging char-misc/char-misc-next (0e27263 Tools: hv: Fix a checkpatch warning)
Merging bcon/master (06c6942 blockconsole: Mark a local work struct static)
CONFLICT (content): Merge conflict in drivers/block/Kconfig
Merging tmem/linux-next (8f0d816 Linux 3.7-rc3)
Merging writeback/writeback-for-next (ed84825 Negative (setpoint-dirty) in bdi_position_ratio())
Merging arm-dt/devicetree/arm-next (ede338f dt: add documentation of ARM dt boot interface)
Merging hwspinlock/linux-next (8b37fcf hwspinlock: add MAINTAINERS entries)
Merging pinctrl/for-next (d463f82 pinctrl: fix mutex deadlock in get_pinctrl_dev_from_of_node())
Merging vhost/linux-next (6713ce9 vhost: fix error handling in RESET_OWNER ioctl)
CONFLICT (content): Merge conflict in drivers/vhost/tcm_vhost.c
CONFLICT (content): Merge conflict in drivers/vhost/net.c
Merging memblock/memblock-kill-early_node_map (7bd0b0f memblock: Reimplement memblock allocation using reverse free area iterator)
Merging remoteproc/for-next (b977785 remoteproc: fix kconfig dependencies for VIRTIO)
CONFLICT (content): Merge conflict in drivers/remoteproc/Kconfig
Merging rpmsg/for-next (397944d rpmsg: fix kconfig dependencies for VIRTIO)
Merging irqdomain/irqdomain/next (560aa53 irqdomain: document the simple domain first_irq)
Merging gpio/gpio/next (753c598 gpio/em: Add Device Tree support)
Merging gpio-lw/for-next (ab6ec0f gpio/omap: ensure gpio context is initialised)
Merging gen-gpio/for_next (f4c5405 gpio: update gpio Chinese documentation)
CONFLICT (modify/delete): drivers/usb/otg/Kconfig deleted in HEAD and modified in gen-gpio/for_next. Version gen-gpio/for_next of drivers/usb/otg/Kconfig left in tree.
CONFLICT (content): Merge conflict in arch/sh/kernel/cpu/sh2a/Makefile
$ git rm -f drivers/usb/otg/Kconfig
Applying: gen-gpio: GPIOLIB merge fix up
Applying: merge fix for Convert selectors of GENERIC_GPIO to GPIOLIB
Applying: merge fix 2 for Convert selectors of GENERIC_GPIO to GPIOLIB
Merging mailbox/dbx500-prcmu-mailbox (c497eba mailbox: fix invalid use of sizeof in mailbox_msg_send())
Merging arm-soc/for-next (d664025 Merge branch 'next/multiplatform' into for-next)
CONFLICT (content): Merge conflict in drivers/usb/host/ohci-exynos.c
CONFLICT (content): Merge conflict in drivers/pinctrl/pinctrl-samsung.h
CONFLICT (content): Merge conflict in drivers/pinctrl/pinctrl-samsung.c
CONFLICT (content): Merge conflict in drivers/pinctrl/Makefile
CONFLICT (modify/delete): drivers/gpio/gpio-vt8500.c deleted in arm-soc/for-next and modified in HEAD. Version HEAD of drivers/gpio/gpio-vt8500.c left in tree.
CONFLICT (content): Merge conflict in drivers/clocksource/tegra20_timer.c
CONFLICT (content): Merge conflict in drivers/clocksource/Makefile
CONFLICT (content): Merge conflict in arch/arm/plat-orion/Makefile
CONFLICT (add/add): Merge conflict in arch/arm/mach-zynq/platsmp.c
CONFLICT (content): Merge conflict in arch/arm/mach-vexpress/v2m.c
CONFLICT (content): Merge conflict in arch/arm/mach-tegra/tegra.c
CONFLICT (content): Merge conflict in arch/arm/mach-tegra/hotplug.c
CONFLICT (content): Merge conflict in arch/arm/mach-spear/spear13xx.c
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2443.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2440.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2412.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2410.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/omap_hwmod.c
CONFLICT (content): Merge conflict in arch/arm/mach-imx/mach-imx6q.c
CONFLICT (modify/delete): arch/arm/mach-imx/cpufreq.c deleted in arm-soc/for-next and modified in HEAD. Version HEAD of arch/arm/mach-imx/cpufreq.c left in tree.
CONFLICT (content): Merge conflict in arch/arm/mach-highbank/highbank.c
CONFLICT (content): Merge conflict in arch/arm/mach-exynos/cpuidle.c
CONFLICT (content): Merge conflict in arch/arm/boot/dts/at91sam9x5.dtsi
CONFLICT (content): Merge conflict in arch/arm/Kconfig
CONFLICT (content): Merge conflict in Documentation/kernel-parameters.txt
$ git rm -f drivers/gpio/gpio-vt8500.c arch/arm/mach-imx/cpufreq.c
Merging bcm2835/for-next (31880c3 Linux 3.9-rc6)
Merging cortex/for-next (4477ca4 ARM: ARMv7-M: Allow the building of new kernel port)
Merging ep93xx/ep93xx-for-next (7ec4429 Merge branch 'ep93xx-fixes' into ep93xx-for-next)
Merging imx-mxs/for-next (3795b56 Merge branches 'mxs/dt-3.11' and 'imx/dt-3.11' into for-next)
Merging ixp4xx/next (19f949f Linux 3.8)
Merging msm/for-next (1df357a Merge branch 'msm-defconfig' into for-next)
Merging renesas/next (cda9c03 Merge branch 'heads/soc-sh73a0' into next)
CONFLICT (content): Merge conflict in drivers/pinctrl/sh-pfc/Kconfig
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/setup-r8a7740.c
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-bockw.c
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
Merging samsung/for-next (e0f8f91 Merge branch 'next/late-exynos' into for-next)
CONFLICT (content): Merge conflict in arch/arm/mach-exynos/cpuidle.c
Merging tegra/for-next (c0c1cb1 Merge branch 'for-3.10/defconfig' into for-next)
Merging dma-mapping/dma-mapping-next (a937536 Linux 3.9-rc3)
Merging pwm/for-next (affb923 pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_config)
Merging dma-buf/for-next (5320c97 dma-buf: double unlock in debugfs code)
Merging userns/for-next (78008c4 proc: Restrict mounting the proc filesystem)
Merging ktest/for-next (df5f7c6 ktest: Reset grub menu cache with different machines)
Merging signal/for-next (99e621f syscalls.h: slightly reduce the jungles of macros)
CONFLICT (content): Merge conflict in include/asm-generic/unistd.h
CONFLICT (content): Merge conflict in fs/splice.c
CONFLICT (content): Merge conflict in fs/read_write.h
CONFLICT (content): Merge conflict in fs/read_write.c
CONFLICT (content): Merge conflict in fs/compat.c
CONFLICT (content): Merge conflict in arch/tile/kernel/compat.c
CONFLICT (content): Merge conflict in arch/tile/Kconfig
CONFLICT (content): Merge conflict in arch/mips/kernel/linux32.c
Applying: cond_syscall and SYSCALL_ALIAS merge fixup
Merging clk/clk-next (1e43525 clk: add clk_ignore_unused option to keep boot clocks on)
Merging random/dev (b980955 random: fix locking dependency with the tasklist_lock)
Merging lzo-update/lzo-update (42b775a lib/lzo: huge LZO decompression speedup on ARM by using unaligned access)
Merging scsi-post-merge/merge-base:master (65112dc Merge git://git.samba.org/sfrench/cifs-2.6)
Merging akpm-current/current (0fbd067 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc)
$ git checkout -b akpm remotes/origin/akpm/master
Applying: revert "ipc: don't allocate a copy larger than max"
Applying: drivers/char/random.c: fix priming of last_data
Applying: sound/soc/codecs/si476x.c: don't use 0bNNN
Applying: x86: make 'mem=' option to work for efi platform
Applying: kernel/auditfilter.c: tree and watch will memory leak when failure occurs
Applying: kernel/audit_tree.c: tree will leak memory when failure occurs in audit_trim_trees()
Applying: drm/fb-helper: don't sleep for screen unblank when an oops is in progress
Applying: drivers/video: implement a simple framebuffer driver
Applying: drivers-video-implement-a-simple-framebuffer-driver-fix
Applying: cyber2000fb: avoid palette corruption at higher clocks
Applying: inotify: invalid mask should return a error number but not set it
Applying: inotify-invalid-mask-should-return-a-error-number-but-not-set-it-fix
Applying: posix_cpu_timer: consolidate expiry time type
Applying: posix_cpu_timers: consolidate timer list cleanups
Applying: posix_cpu_timers: consolidate expired timers check
Applying: selftests: add basic posix timers selftests
Applying: posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
Applying: posix_timers: Fix racy timer delta caching on task exit
Applying: ipvs: change type of netns_ipvs->sysctl_sync_qlen_max
Applying: lockdep: introduce lock_acquire_exclusive/shared helper macros
Applying: lglock: update lockdep annotations to report recursive local locks
Applying: block: restore /proc/partitions to not display non-partitionable removable devices
Applying: fs/block_dev.c: no need to check inode->i_bdev in bd_forget()
Applying: fs/dcache.c: add cond_resched() to shrink_dcache_parent()
Applying: watchdog: trigger all-cpu backtrace when locked up and going to panic
Applying: vm: adjust ifdef for TINY_RCU
Applying: mm: frontswap: lazy initialization to allow tmem backends to build/run as modules
Applying: frontswap: make frontswap_init use a pointer for the ops
Applying: mm: frontswap: cleanup code
Applying: frontswap: get rid of swap_lock dependency
Applying: mm: cleancache: lazy initialization to allow tmem backends to build/run as modules
Applying: cleancache: Make cleancache_init use a pointer for the ops
Applying: mm: cleancache: clean up cleancache_enabled
Applying: xen: tmem: enable Xen tmem shim to be built/loaded as a module
Applying: xen-tmem-enable-xen-tmem-shim-to-be-built-loaded-as-a-module-fix
Applying: zcache/tmem: Better error checking on frontswap_register_ops return value.
Applying: staging: zcache: enable ramster to be built/loaded as a module
Applying: staging-zcache-enable-ramster-to-be-built-loaded-as-a-module-fix
Applying: staging: zcache: enable zcache to be built/loaded as a module
Applying: mm/SPARC: use common help functions to free reserved pages
Applying: clear_refs: sanitize accepted commands declaration
Applying: clear_refs-sanitize-accepted-commands-declaration-fix
Applying: clear_refs: introduce private struct for mm_walk
Applying: pagemap: introduce pagemap_entry_t without pmshift bits
Applying: pagemap: introduce the /proc/PID/pagemap2 file
Applying: mm: soft-dirty bits for user memory changes tracking
Applying: mem-soft-dirty: Reshuffle CONFIG_ options to be more Arch-friendly
Applying: selftest: add simple test for soft-dirty bit
Applying: mm: remove free_area_cache
Applying: include/linux/mmzone.h: cleanups
Applying: include-linux-mmzoneh-cleanups-fix
Applying: mm: memmap_init_zone() performance improvement
Applying: drop_caches: add some documentation and info message
Applying: drivers/usb/gadget/amd5536udc.c: avoid calling dma_pool_create() with NULL dev
Applying: mm/dmapool.c: fix null dev in dma_pool_create()
Applying: memcg: debugging facility to access dangling memcgs
Applying: memcg-debugging-facility-to-access-dangling-memcgs-fix
Applying: mm: add vm event counters for balloon pages compaction
Applying: kernel/range.c: subtract_range: fix the broken phrase issued by printk
Applying: smp: Give WARN()ing when calling smp_call_function_many()/single() in serving irq
Applying: x86: don't show trace beyond show_stack(NULL, NULL)
Applying: sparc32: make show_stack() acquire %fp if @_ksp is not specified
Applying: dump_stack: consolidate dump_stack() implementations and unify their behaviors
Applying: dmi: morph dmi_dump_ids() into dmi_format_ids() which formats into a buffer
Applying: dump_stack: implement arch-specific hardware description in task dumps
Applying: dump_stack: unify debug information printed by show_regs()
Applying: arc, print-fatal-signals: reduce duplicated information
Applying: kthread: implement probe_kthread_data()
Applying: workqueue: include workqueue info when printing debug dump of a worker task
Applying: writeback: set worker desc to identify writeback workers in task dumps
Applying: kernel/smp.c: use '|=' for csd_lock
Applying: kernel/smp.c: remove 'priv' of call_single_data
Applying: include/linux/fs.h: disable preempt when acquire i_size_seqcount write lock
Applying: kernel/smp.c: cleanups
Applying: kmsg: honor dmesg_restrict sysctl on /dev/kmsg
Applying: drivers/leds/leds-ot200.c: fix error caused by shifted mask
Applying: lib/string_helpers: introduce generic string_unescape
Applying: lib-string_helpers-introduce-generic-string_unescape-fix
Applying: staging: speakup: remove custom string_unescape_any_inplace
Applying: dynamic_debug: reuse generic string_unescape function
Applying: binfmt_misc: reuse string_unescape_inplace()
Applying: kernel/compat.c: make do_sysinfo() static
Applying: kernel/timer.c: convert compat_sys_sysinfo to COMPAT_SYSCALL_DEFINE
Applying: kernel/timer.c: move some non timer related syscalls to kernel/sys.c
Applying: kernel-timerc-ove-some-non-timer-related-syscalls-to-kernel-sysc-checkpatch-fixes
Applying: epoll: trim epitem by one cache line
Applying: epoll-trim-epitem-by-one-cache-line-on-x86_64-fix
Applying: epoll: comment + BUILD_BUG_ON to prevent epitem bloat
Applying: epoll: use RCU to protect wakeup_source in epitem
Applying: epoll: fix suspicious RCU usage in ep_poll_callback
Applying: epoll: lock ep->mtx in ep_free to silence lockdep
Applying: epoll: cleanup: hoist out f_op->poll calls
Applying: epoll: cleanup: use RCU_INIT_POINTER when nulling
Applying: fs: make binfmt support for #! scripts modular and removable
Applying: binfmt_elf: PIE: make PF_RANDOMIZE check comment more accurate
Applying: binfmt_elf.c: use get_random_int() to fix entropy depleting
Applying: dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()
Applying: dmi_scan: proper buf type in dmi_present()
Applying: i2o: check copy_from_user() size parameter
Applying: drivers/rtc/rtc-v3020.c: use gpio_request_array()
Applying: drivers/rtc/rtc-pxa.c: fix set time sync time issue
Applying: drivers-rtc-rtc-pxac-fix-set-time-sync-time-issue-fix
Applying: drivers/rtc/rtc-pxa.c: use devm_* APIs
Applying: nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption
Applying: nilfs2-fix-issue-with-flush-kernel-thread-after-remount-in-ro-mode-because-of-drivers-internal-error-or-metadata-corruption-fix
Applying: nilfs2: fix using of PageLocked() in nilfs_clear_dirty_page()
Applying: nilfs2: remove unneeded test in nilfs_writepage()
Applying: hfs: add error checking for hfs_find_init()
Applying: hfsplus: fix warnings in fs/hfsplus/bfind.c
Applying: hfsplus-fix-warnings-in-fs-hfsplus-bfindc-in-function-hfs_find_1st_rec_by_cnid-fix
Applying: hfs/hfsplus: convert dprint to hfs_dbg
Applying: hfs/hfsplus: convert printks to pr_<level>
Applying: hfsplus: add error propagation to __hfsplus_ext_write_extent()
Applying: hfsplus: remove duplicated message prefix in hfsplus_block_free()
Applying: fat: additions to support fat_fallocate
Applying: fat-additions-to-support-fat_fallocate-fix
Applying: ptrace: add ability to retrieve signals without removing from a queue (v4)
Applying: selftest: add a test case for PTRACE_PEEKSIGINFO
Applying: usermodehelper: export call_usermodehelper_exec() and call_usermodehelper_setup()
Applying: usermodehelper-export-_exec-and-_setup-functions-fix
Applying: kmod: split call to call_usermodehelper_fns()
Applying: KEYS: split call to call_usermodehelper_fns()
Applying: coredump: remove trailling whitespace
Applying: usermodehelper: split remaining calls to call_usermodehelper_fns()
Applying: kmod: remove call_usermodehelper_fns()
Applying: coredump: only SIGKILL should interrupt the coredumping task
Applying: coredump: ensure that SIGKILL always kills the dumping thread
Applying: coredump: sanitize the setting of signal->group_exit_code
Applying: coredump: introduce dump_interrupted()
Applying: coredump: factor out the setting of PF_DUMPCORE
Applying: coredump: change wait_for_dump_helpers() to use wait_event_interruptible()
Applying: fs, proc: truncate /proc/pid/comm writes to first TASK_COMM_LEN bytes
Applying: set_task_comm: kill the pointless memset() + wmb()
Applying: exec: do not abuse ->cred_guard_mutex in threadgroup_lock()
Applying: kexec: fix wrong types of some local variables
Applying: kexec: Use min() and min_t() to simplify logic
Applying: kexec-use-min_t-to-simplify-logic-fix
Applying: ipc: clamp with min()
Applying: ipc: separate msg allocation from userspace copy
Applying: ipc: tighten msg copy loops
Applying: ipc: set EFAULT as default error in load_msg()
Applying: ipc: remove msg handling from queue scan
Applying: ipc: implement MSG_COPY as a new receive mode
Applying: ipc: simplify msg list search
Applying: ipc: refactor msg list search into separate function
Applying: ipc: find_msg can be static
Applying: ipc/msgutil.c: use linux/uaccess.h
Applying: ipc: remove bogus lock comment for ipc_checkid
Applying: ipc: introduce obtaining a lockless ipc object
Applying: ipc-introduce-obtaining-a-lockless-ipc-object-fix
Applying: ipc: introduce lockless pre_down ipcctl
Applying: ipc,sem: do not hold ipc lock more than necessary
Applying: ipc,sem: prevent releasing RCU read lock twice in semctl_main
Applying: ipcsem-do-not-hold-ipc-lock-more-than-necessary-fix-checkpatch-fixes
Applying: ipc,sem: open code and rename sem_lock
Applying: ipcsem-open-code-and-rename-sem_lock-fix
Applying: ipc,sem: have only one list in struct sem_queue
Applying: ipc,sem: fine grained locking for semtimedop
Applying: fix for sem_lock
Applying: ipc, sem: prevent possible deadlock
Applying: ipc,sem: fix locking in semctl_main
Applying: ipc,sem: untangle RCU locking with find_alloc_undo
Applying: ipc, sem: do not call sem_lock when bogus sma
Applying: ipc: make refcounter atomic
Applying: ipc,sem: fix lockdep false positive
Applying: ipc/msg.c: use list_for_each_entry_[safe] for list traversing
Applying: ipc: sysv shared memory limited to 8TiB
Applying: ipc-sysv-shared-memory-limited-to-8tib-fix
Applying: ipc/sem.c: alternatives to preempt_disable()
Applying: mwave: fix info leak in mwave_ioctl()
Applying: rapidio: make enumeration/discovery configurable
Applying: rapidio: add enumeration/discovery start from user space
Applying: rapidio: documentation update for enumeration changes
Applying: rbtree_test: add extra rbtree integrity check
Applying: rbtree_test: add __init/__exit annotations
Applying: kernel/pid.c: improve flow of a loop inside alloc_pidmap.
Applying: kernel-pidc-improve-flow-of-a-loop-inside-alloc_pidmap-fix
Applying: pid_namespace.c/.h: simplify defines
Applying: pid_namespacec-h-simplify-defines-fix
Applying: nbd: increase default and max request sizes
Applying: aoe: replace kmalloc and then memcpy with kmemdup
Applying: drivers/net: rename random32() to prandom_u32()
Applying: drivers-net-rename-random32-to-prandom_u32-fix
Applying: brcm80211: fix the misaligned indentation
Applying: remove unused random32() and srandom32()
Applying: random: fix accounting race condition with lockless irq entropy_count update
Applying: pps: hide more configuration symbols behind CONFIG_PPS
Applying: pps: pps_kc_hardpps_lock can be static
Applying: semaphore: use unlikely() for down's timeout
Applying: semaphore: use `bool' type for semaphore_waiter's up
Applying: drivers/memstick/host/r592.c: make r592_pm_ops static
Applying: kernel/relay.c: remove unused function argument actor
Applying: kernel/relay.c: move FIX_SIZE macro into relay.c
Applying: relay: use macro PAGE_ALIGN instead of FIX_SIZE
Applying: relay: fix timer madness
Applying: mm: remove old aio use_mm() comment
Applying: aio: remove dead code from aio.h
Applying: gadget: remove only user of aio retry
Applying: gadget-remove-only-user-of-aio-retry-checkpatch-fixes
Applying: aio: remove retry-based AIO
Applying: aio-remove-retry-based-aio-checkpatch-fixes
Applying: char: add aio_{read,write} to /dev/{null,zero}
Applying: aio: kill return value of aio_complete()
Applying: aio: add kiocb_cancel()
Applying: aio: move private stuff out of aio.h
Applying: aio: dprintk() -> pr_debug()
Applying: aio: do fget() after aio_get_req()
Applying: aio: make aio_put_req() lockless
Applying: aio-make-aio_put_req-lockless-checkpatch-fixes
Applying: aio: refcounting cleanup
Applying: aio-refcounting-cleanup-checkpatch-fixes
Applying: wait: add wait_event_hrtimeout()
Applying: aio: make aio_read_evt() more efficient, convert to hrtimers
Applying: aio-make-aio_read_evt-more-efficient-convert-to-hrtimers-checkpatch-fixes
Applying: aio: use flush_dcache_page()
Applying: aio: use cancellation list lazily
Applying: aio: change reqs_active to include unreaped completions
Applying: aio: kill batch allocation
Applying: aio: kill struct aio_ring_info
Applying: aio: give shared kioctx fields their own cachelines
Applying: aio: reqs_active -> reqs_available
Applying: aio: percpu reqs_available
Applying: generic dynamic per cpu refcounting
Applying: generic-dynamic-per-cpu-refcounting-checkpatch-fixes
Applying: generic-dynamic-per-cpu-refcounting-fix
Applying: aio: percpu ioctx refcount
Applying: aio: use xchg() instead of completion_lock
Applying: aio: don't include aio.h in sched.h
Applying: aio-dont-include-aioh-in-schedh-fix
Applying: aio: kill ki_key
Applying: aio: kill ki_retry
Applying: aio-kill-ki_retry-fix
Applying: aio-kill-ki_retry-checkpatch-fixes
Applying: block: prep work for batch completion
Applying: block-prep-work-for-batch-completion-checkpatch-fixes
Applying: block-prep-work-for-batch-completion-checkpatch merge fixes
Applying: block-prep-work-for-batch-completion-fix-2
Applying: block-prep-work-for-batch-completion-fix-3
Applying: block-prep-work-for-batch-completion-fix-3-fix
Applying: block-prep-work-for-batch-completion-fix-4
Applying: block-prep-work-for-batch-completion-fix-99
Applying: block, aio: batch completion for bios/kiocbs
Applying: block-aio-batch-completion-for-bios-kiocbs-checkpatch-fixes
Applying: block-aio-batch-completion-for-bios-kiocbs-fix
Applying: virtio-blk: convert to batch completion
Applying: mtip32xx: convert to batch completion
Applying: aio: fix kioctx not being freed after cancellation at exit time
Applying: Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
Applying: kconfig-consolidate-config_debug_strict_user_copy_checks-fix
Applying: kconfig menu: move Virtualization drivers near other virtualization options
Applying: init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display
Applying: UAPI: remove empty Kbuild files
Applying: kernel/sys.c: make prctl(PR_SET_MM) generally available
Applying: notifier-error-inject: fix module names in Kconfig
Applying: decompressor: add LZ4 decompressor module
Applying: lib: add support for LZ4-compressed kernel
Applying: arm: add support for LZ4-compressed kernel
Applying: x86: add support for LZ4-compressed kernel
Applying: lib: add lz4 compressor module
Applying: lib-add-lz4-compressor-module-fix
Applying: crypto: add lz4 Cryptographic API
Applying: crypto-add-lz4-cryptographic-api-fix
Applying: lib/decompress.c: fix initconst
Applying: seccomp: add generic code for jitted seccomp filters.
Applying: ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.
Applying: ARM: net: bpf_jit: add support for jitted seccomp filters.
Applying: bpf: add comments explaining the schedule_work() operation
Applying: kgdb/sysrq: fix inconstistent help message of sysrq key
Applying: power/sysrq: fix inconstistent help message of sysrq key
Applying: ARM/etm/sysrq: fix inconstistent help message of sysrq key
Applying: powerpc/xmon/sysrq: fix inconstistent help message of sysrq key
Applying: sparc/sysrq: fix inconstistent help message of sysrq key
Applying: ethernet/emac/sysrq: fix inconstistent help message of sysrq key
Applying: Documentation/sysrq: fix inconstistent help message of sysrq key
Merging akpm/master (843d8e2 Documentation/sysrq: fix inconstistent help message of sysrq key)
#1 lore raw
Quoted 16 lines · Stephen Rothwell

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

The nfsd tree lost its build failure.

The xfs tree lost its build failure.

The vfs tree gained conflicts against Linus' and the powerpc trees and gained a build failure for which I applied a merge fix patch.

The drm-intel tree gained a conflict against the drm tree.

Quoted 8 lines

The block tree gained a conflict against Linus' tree.

The arm-soc tree gained a conflict against the arm tree.

The akpm tree lost a lot of patches that turned up elsewhere.

----------------------------------------------------------------------------

For several weeks this is one of a Linux-Next release with no serious issues for me.

Thanks to all involved -next folks!

- Sedat -

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-next20130501-1-iniza-small ([email protected]@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed May 1 11:28:41 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-next20130501-1-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0203e000, 0x0203efff] PGTABLE
[    0.000000] BRK [0x0203f000, 0x0203ffff] PGTABLE
[    0.000000] BRK [0x02040000, 0x02040fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x02041000, 0x02041fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02042000, 0x02042fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86848 r8192 d23744 u262144
[    0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-next20130501-1-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938604k/4716544k available (7040k kernel code, 630544k absent, 147396k reserved, 6267k data, 1316k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.346 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.69 BogoMIPS (lpj=6385384)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000140] Security Framework initialized
[    0.000151] AppArmor: AppArmor initialized
[    0.000154] Yama: becoming mindful.
[    0.000543] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001608] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002075] Mount-cache hash table entries: 256
[    0.002604] Initializing cgroup subsys memory
[    0.002674] Initializing cgroup subsys devices
[    0.002678] Initializing cgroup subsys freezer
[    0.002682] Initializing cgroup subsys blkio
[    0.002685] Initializing cgroup subsys perf_event
[    0.002690] Initializing cgroup subsys hugetlb
[    0.002774] Disabled fast string operations
[    0.002778] CPU: Physical Processor ID: 0
[    0.002780] CPU: Processor Core ID: 0
[    0.002786] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002786] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002793] mce: CPU supports 7 MCE banks
[    0.002810] CPU0: Thermal monitoring enabled (TM1)
[    0.002821] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002821] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002821] tlb_flushall_shift: 5
[    0.002914] Freeing SMP alternatives: 24k freed
[    0.003900] ACPI: Core revision 20130328
[    0.014665] ACPI: All ACPI Tables successfully acquired
[    0.016307] ftrace: allocating 26564 entries in 104 pages
[    0.031409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071071] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.071083] TSC deadline timer enabled
[    0.071095] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.071108] ... version:                3
[    0.071111] ... bit width:              48
[    0.071113] ... generic registers:      4
[    0.071115] ... value mask:             0000ffffffffffff
[    0.071118] ... max period:             000000007fffffff
[    0.071121] ... fixed-purpose events:   3
[    0.071123] ... event mask:             000000070000000f
[    0.084192] Disabled fast string operations
[    0.087379] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098829] Disabled fast string operations
[    0.112494] Disabled fast string operations
[    0.073158] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.114627] Brought up 4 CPUs
[    0.114636] smpboot: Total of 4 processors activated (12770.76 BogoMIPS)
[    0.118686] devtmpfs: initialized
[    0.120669] EVM: security.selinux
[    0.120673] EVM: security.SMACK64
[    0.120675] EVM: security.capability
[    0.120763] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.122262] regulator-dummy: no parameters
[    0.122414] NET: Registered protocol family 16
[    0.122763] ACPI: bus type PCI registered
[    0.122881] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122888] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129664] PCI: Using configuration type 1 for base access
[    0.133003] bio: create slab <bio-0> at 0
[    0.133409] ACPI: Added _OSI(Module Device)
[    0.133415] ACPI: Added _OSI(Processor Device)
[    0.133418] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133421] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135205] ACPI: EC: Look up EC in DSDT
[    0.162703] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168661] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.180144] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.180643] ACPI: Dynamic OEM Table Load:
[    0.180647] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.195143] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.195720] ACPI: Dynamic OEM Table Load:
[    0.195724] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.206818] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.207290] ACPI: Dynamic OEM Table Load:
[    0.207294] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.225051] ACPI: Interpreter enabled
[    0.225069] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.225094] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225097] ACPI: Using IOAPIC for interrupt routing
[    0.225154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.248965] ACPI: Power Resource [FN00] (off)
[    0.249151] ACPI: Power Resource [FN01] (off)
[    0.249337] ACPI: Power Resource [FN02] (off)
[    0.249520] ACPI: Power Resource [FN03] (off)
[    0.249709] ACPI: Power Resource [FN04] (off)
[    0.250814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.251160] \_SB_.PCI0:_OSC invalid UUID
[    0.251161] _OSC request data:1 8 0 
[    0.252158] PCI host bridge to bus 0000:00
[    0.252164] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.252168] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.252172] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.252176] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.252180] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.252184] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.252202] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.252364] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.252377] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.252384] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.252390] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.252580] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.252607] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.252692] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.252856] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.252881] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.252982] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.253088] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.253107] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.253186] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.253233] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.253303] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.253395] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.253444] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.253519] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.253609] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.253665] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.253739] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.253870] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.254004] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.254028] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.254129] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.254233] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.254434] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.254456] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.254467] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.254477] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.254487] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.254496] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.254507] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.254559] pci 0000:00:1f.2: PME# supported from D3hot
[    0.254685] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.254705] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.254730] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.255105] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.255286] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.256002] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.256172] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.262803] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.262812] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.262990] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.263060] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.263183] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.263258] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.263591] pci 0000:02:00.0: supports D1 D2
[    0.263592] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.263719] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.270738] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.270753] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.270776] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.270975] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.271013] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.271213] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.278733] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.278753] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.278952] \_SB_.PCI0:_OSC invalid UUID
[    0.278953] _OSC request data:1 1f 0 
[    0.278958] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.278963] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.279869] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.279988] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.280106] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.280221] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.280337] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.280453] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.280569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.280684] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.281291] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.281301] acpi root: \_SB_.PCI0 notify handler is installed
[    0.281361] Found 1 acpi root devices
[    0.281427] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.281635] ACPI: No dock devices found.
[    0.281838] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.281845] vgaarb: loaded
[    0.281847] vgaarb: bridge control possible 0000:00:02.0
[    0.282525] SCSI subsystem initialized
[    0.282529] ACPI: bus type ATA registered
[    0.282655] libata version 3.00 loaded.
[    0.282717] ACPI: bus type USB registered
[    0.282767] usbcore: registered new interface driver usbfs
[    0.282791] usbcore: registered new interface driver hub
[    0.282845] usbcore: registered new device driver usb
[    0.283171] PCI: Using ACPI for IRQ routing
[    0.284842] PCI: pci_cache_line_size set to 64 bytes
[    0.284953] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.284955] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.284957] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.284959] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.285242] NetLabel: Initializing
[    0.285245] NetLabel:  domain hash size = 128
[    0.285247] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.285297] NetLabel:  unlabeled traffic allowed by default
[    0.285384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.285394] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.287411] Switching to clocksource hpet
[    0.304536] AppArmor: AppArmor Filesystem Enabled
[    0.304595] pnp: PnP ACPI init
[    0.304614] ACPI: bus type PNP registered
[    0.305000] pnp 00:00: [dma 4]
[    0.305043] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.305086] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.305258] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.305312] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.305391] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.305396] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.305400] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.305404] system 00:04: [io  0xffff] has been reserved
[    0.305408] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.305413] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.305417] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.305422] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.305426] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.305430] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.305435] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.305482] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.305580] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.305586] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.305648] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.305733] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.306048] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.306053] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.306057] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.306062] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.306066] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.306070] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.306074] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.306079] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.306085] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.306089] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.306094] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.306809] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.306848] pnp: PnP ACPI: found 11 devices
[    0.306851] ACPI: bus type PNP unregistered
[    0.314950] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.314959] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.314972] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.314977] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.314988] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.314998] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.315005] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.315450] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.315452] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.315455] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.315457] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.315459] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.315461] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.315463] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.315465] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.315467] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.315606] NET: Registered protocol family 2
[    0.315955] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.316137] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.316435] TCP: Hash tables configured (established 32768 bind 32768)
[    0.316697] TCP: reno registered
[    0.316717] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.316784] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.317044] NET: Registered protocol family 1
[    0.317065] pci 0000:00:02.0: Boot video device
[    0.317836] PCI: CLS 64 bytes, default 64
[    0.318046] Trying to unpack rootfs image as initramfs...
[    0.390955] Freeing initrd memory: 3268k freed
[    0.391671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.391680] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.392021] Scanning for low memory corruption every 60 seconds
[    0.392435] Initialise module verification
[    0.392505] audit: initializing netlink socket (disabled)
[    0.392533] type=2000 audit(1367408212.388:1): initialized
[    0.422952] bounce pool size: 64 pages
[    0.422980] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.423681] VFS: Disk quotas dquot_6.5.2
[    0.423728] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.424568] fuse init (API version 7.21)
[    0.424690] msgmni has been set to 7699
[    0.425400] Key type asymmetric registered
[    0.425406] Asymmetric key parser 'x509' registered
[    0.425460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.425518] io scheduler noop registered
[    0.425524] io scheduler deadline registered (default)
[    0.425562] io scheduler cfq registered
[    0.425959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.426004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.426099] intel_idle: MWAIT substates: 0x21120
[    0.426101] intel_idle: v0.4 model 0x2A
[    0.426102] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.426634] ACPI: AC Adapter [ADP1] (on-line)
[    0.427025] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.427050] ACPI: Lid Switch [LID0]
[    0.427118] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.427126] ACPI: Power Button [PWRB]
[    0.427190] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.427196] ACPI: Power Button [PWRF]
[    0.427295] ACPI: Fan [FAN0] (off)
[    0.427369] ACPI: Fan [FAN1] (off)
[    0.427423] ACPI: Fan [FAN2] (off)
[    0.427477] ACPI: Fan [FAN3] (off)
[    0.427532] ACPI: Fan [FAN4] (off)
[    0.427628] ACPI: Requesting acpi_cpufreq
[    0.435052] thermal LNXTHERM:00: registered as thermal_zone0
[    0.435058] ACPI: Thermal Zone [TZ00] (63 C)
[    0.435500] thermal LNXTHERM:01: registered as thermal_zone1
[    0.435504] ACPI: Thermal Zone [TZ01] (30 C)
[    0.435560] GHES: HEST is not enabled!
[    0.435774] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.440311] ACPI: Battery Slot [BAT1] (battery present)
[    0.440439] Linux agpgart interface v0.103
[    0.442914] brd: module loaded
[    0.444210] loop: module loaded
[    0.444435] mei_me 0000:00:16.0: setting latency timer to 64
[    0.444480] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.447526] ahci 0000:00:1f.2: version 3.0
[    0.447704] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.447915] ahci: SSS flag set, parallel bus scan disabled
[    0.463338] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.463345] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.463353] ahci 0000:00:1f.2: setting latency timer to 64
[    0.488135] scsi0 : ahci
[    0.488309] scsi1 : ahci
[    0.488436] scsi2 : ahci
[    0.488566] scsi3 : ahci
[    0.488692] scsi4 : ahci
[    0.488857] scsi5 : ahci
[    0.488933] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.488939] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.488943] ata3: DUMMY
[    0.488947] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.488952] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.488955] ata6: DUMMY
[    0.489871] libphy: Fixed MDIO Bus: probed
[    0.490138] tun: Universal TUN/TAP device driver, 1.6
[    0.490141] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.490220] PPP generic driver version 2.4.2
[    0.490343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.490347] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[    0.490354] ehci-pci: EHCI PCI platform driver
[    0.490536] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.490545] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.490555] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.490579] ehci-pci 0000:00:1a.0: debug port 2
[    0.490586] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    0.490590] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    0.490629] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.494510] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.494512] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[    0.494558] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.494565] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.503288] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.503339] usb usb1: default language 0x0409
[    0.503352] usb usb1: udev 1, busnum 1, minor = 0
[    0.503354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.503358] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.503362] usb usb1: Product: EHCI Host Controller
[    0.503365] usb usb1: Manufacturer: Linux 3.9.0-next20130501-1-iniza-small ehci_hcd
[    0.503369] usb usb1: SerialNumber: 0000:00:1a.0
[    0.503495] usb usb1: usb_probe_device
[    0.503498] usb usb1: configuration #1 chosen from 1 choice
[    0.503508] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    0.503542] hub 1-0:1.0: usb_probe_interface
[    0.503544] hub 1-0:1.0: usb_probe_interface - got id
[    0.503547] hub 1-0:1.0: USB hub found
[    0.503556] hub 1-0:1.0: 2 ports detected
[    0.503559] hub 1-0:1.0: standalone hub
[    0.503561] hub 1-0:1.0: no power switching (usb 1.0)
[    0.503562] hub 1-0:1.0: individual port over-current protection
[    0.503564] hub 1-0:1.0: power on to power good time: 20ms
[    0.503570] hub 1-0:1.0: local power source is good
[    0.503625] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    0.503847] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.503854] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.503863] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.503886] ehci-pci 0000:00:1d.0: debug port 2
[    0.503892] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    0.503896] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    0.503930] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.507806] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.507808] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[    0.507851] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.507858] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.519284] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.519334] usb usb2: default language 0x0409
[    0.519346] usb usb2: udev 1, busnum 2, minor = 128
[    0.519348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.519352] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.519356] usb usb2: Product: EHCI Host Controller
[    0.519359] usb usb2: Manufacturer: Linux 3.9.0-next20130501-1-iniza-small ehci_hcd
[    0.519363] usb usb2: SerialNumber: 0000:00:1d.0
[    0.519479] usb usb2: usb_probe_device
[    0.519482] usb usb2: configuration #1 chosen from 1 choice
[    0.519492] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    0.519521] hub 2-0:1.0: usb_probe_interface
[    0.519523] hub 2-0:1.0: usb_probe_interface - got id
[    0.519526] hub 2-0:1.0: USB hub found
[    0.519534] hub 2-0:1.0: 2 ports detected
[    0.519537] hub 2-0:1.0: standalone hub
[    0.519539] hub 2-0:1.0: no power switching (usb 1.0)
[    0.519540] hub 2-0:1.0: individual port over-current protection
[    0.519542] hub 2-0:1.0: power on to power good time: 20ms
[    0.519547] hub 2-0:1.0: local power source is good
[    0.519598] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    0.519676] ehci-platform: EHCI generic platform driver
[    0.519695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.519698] ohci_hcd: block sizes: ed 80 td 96
[    0.519739] uhci_hcd: USB Universal Host Controller Interface driver
[    0.519935] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.519946] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.529657] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[    0.529687] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.529695] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.529702] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.529709] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.529716] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.529991] usb usb3: default language 0x0409
[    0.530003] usb usb3: udev 1, busnum 3, minor = 256
[    0.530005] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.530009] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.530013] usb usb3: Product: xHCI Host Controller
[    0.530016] usb usb3: Manufacturer: Linux 3.9.0-next20130501-1-iniza-small xhci_hcd
[    0.530020] usb usb3: SerialNumber: 0000:03:00.0
[    0.530126] usb usb3: usb_probe_device
[    0.530128] usb usb3: configuration #1 chosen from 1 choice
[    0.530133] xHCI xhci_add_endpoint called for root hub
[    0.530135] xHCI xhci_check_bandwidth called for root hub
[    0.530141] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    0.530173] hub 3-0:1.0: usb_probe_interface
[    0.530175] hub 3-0:1.0: usb_probe_interface - got id
[    0.530178] hub 3-0:1.0: USB hub found
[    0.530195] hub 3-0:1.0: 2 ports detected
[    0.530198] hub 3-0:1.0: standalone hub
[    0.530199] hub 3-0:1.0: no power switching (usb 1.0)
[    0.530201] hub 3-0:1.0: individual port over-current protection
[    0.530202] hub 3-0:1.0: Single TT
[    0.530204] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.530206] hub 3-0:1.0: power on to power good time: 20ms
[    0.530211] hub 3-0:1.0: local power source is good
[    0.530246] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    0.530314] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.530321] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.530332] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[    0.530367] usb usb4: skipped 1 descriptor after endpoint
[    0.530372] usb usb4: default language 0x0409
[    0.530383] usb usb4: udev 1, busnum 4, minor = 384
[    0.530385] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.530389] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.530393] usb usb4: Product: xHCI Host Controller
[    0.530396] usb usb4: Manufacturer: Linux 3.9.0-next20130501-1-iniza-small xhci_hcd
[    0.530400] usb usb4: SerialNumber: 0000:03:00.0
[    0.530505] usb usb4: usb_probe_device
[    0.530508] usb usb4: configuration #1 chosen from 1 choice
[    0.530512] xHCI xhci_add_endpoint called for root hub
[    0.530513] xHCI xhci_check_bandwidth called for root hub
[    0.530519] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    0.530548] hub 4-0:1.0: usb_probe_interface
[    0.530550] hub 4-0:1.0: usb_probe_interface - got id
[    0.530552] hub 4-0:1.0: USB hub found
[    0.530565] hub 4-0:1.0: 2 ports detected
[    0.530568] hub 4-0:1.0: standalone hub
[    0.530569] hub 4-0:1.0: no power switching (usb 1.0)
[    0.530571] hub 4-0:1.0: individual port over-current protection
[    0.530573] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.530574] hub 4-0:1.0: power on to power good time: 20ms
[    0.530579] hub 4-0:1.0: local power source is good
[    0.530617] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    0.559320] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.566271] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.566279] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.566508] mousedev: PS/2 mouse device common for all mice
[    0.566981] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.567018] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.567086] device-mapper: uevent: version 1.0.3
[    0.567174] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[    0.567185] Intel P-state driver initializing.
[    0.567200] Intel pstate controlling: cpu 0
[    0.567236] Intel pstate controlling: cpu 1
[    0.567265] Intel pstate controlling: cpu 2
[    0.567289] Intel pstate controlling: cpu 3
[    0.567568] cpuidle: using governor ladder
[    0.567579] ledtrig-cpu: registered to indicate activity on CPUs
[    0.567807] ashmem: initialized
[    0.567965] TCP: cubic registered
[    0.568069] NET: Registered protocol family 10
[    0.568621] NET: Registered protocol family 17
[    0.568643] Key type dns_resolver registered
[    0.569177] PM: Hibernation image not present or could not be loaded.
[    0.569180] Loading module verification certificates
[    0.570527] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: c734199fbdf18ba6b9f7b51c7fdc3c25eee273d8'
[    0.570564] registered taskstats version 1
[    0.574297] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.574508] Key type trusted registered
[    0.582023] Key type encrypted registered
[    0.591970] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.591984] EDD information not available.
[    0.607253] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    0.607266] hub 1-0:1.0: port 1: status 0501 change 0001
[    0.623223] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    0.623232] hub 2-0:1.0: port 1: status 0501 change 0001
[    0.631251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.631275] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.631292] hub 3-0:1.0: hub_suspend
[    0.631304] usb usb3: bus auto-suspend, wakeup 1
[    0.631356] hub 4-0:1.0: hub_suspend
[    0.631363] usb usb4: bus auto-suspend, wakeup 1
[    0.707196] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    0.707214] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    0.763408] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[    0.763422] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    0.807164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.808395] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.808411] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.809496] ata1.00: configured for UDMA/133
[    0.810044] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.810678] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.810700] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.810783] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.811028] sd 0:0:0:0: [sda] Write Protect is off
[    0.811046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.811315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.819091] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.824601]  sda: sda1 sda2 sda3
[    0.826061] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.875328] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[    0.875343] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    0.951763] usb 1-1: udev 2, busnum 1, minor = 1
[    0.951774] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.951787] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.952102] usb 1-1: usb_probe_device
[    0.952110] usb 1-1: configuration #1 chosen from 1 choice
[    0.952315] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    0.952393] hub 1-1:1.0: usb_probe_interface
[    0.952399] hub 1-1:1.0: usb_probe_interface - got id
[    0.952406] hub 1-1:1.0: USB hub found
[    0.952538] hub 1-1:1.0: 6 ports detected
[    0.952547] hub 1-1:1.0: standalone hub
[    0.952551] hub 1-1:1.0: individual port power switching
[    0.952555] hub 1-1:1.0: individual port over-current protection
[    0.952558] hub 1-1:1.0: Single TT
[    0.952563] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.952567] hub 1-1:1.0: power on to power good time: 100ms
[    0.952784] hub 1-1:1.0: local power source is good
[    0.953255] hub 1-1:1.0: enabling power on all ports
[    0.954223] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    0.954240] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.007227] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[    1.007237] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.051092] hub 1-1:1.0: port 2: status 0101 change 0001
[    1.051469] hub 1-1:1.0: port 4: status 0101 change 0001
[    1.062922] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.119147] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[    1.119157] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.130920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.131441] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.131452] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.132088] ata2.00: configured for UDMA/133
[    1.132591] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.133119] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.133205] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.133337] sd 1:0:0:0: [sdb] Write Protect is off
[    1.133350] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.133420] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.134665]  sdb: sdb1 sdb2
[    1.135631] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.150913] usb 1-1: link qh256-0001/ffff88011871d4c0 start 1 [1/0 us]
[    1.195375] usb 2-1: udev 2, busnum 2, minor = 129
[    1.195385] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.195398] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.195697] usb 2-1: usb_probe_device
[    1.195703] usb 2-1: configuration #1 chosen from 1 choice
[    1.195887] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[    1.195970] hub 2-1:1.0: usb_probe_interface
[    1.195975] hub 2-1:1.0: usb_probe_interface - got id
[    1.195981] hub 2-1:1.0: USB hub found
[    1.196114] hub 2-1:1.0: 6 ports detected
[    1.196123] hub 2-1:1.0: standalone hub
[    1.196127] hub 2-1:1.0: individual port power switching
[    1.196130] hub 2-1:1.0: individual port over-current protection
[    1.196134] hub 2-1:1.0: Single TT
[    1.196139] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    1.196143] hub 2-1:1.0: power on to power good time: 100ms
[    1.196390] hub 2-1:1.0: local power source is good
[    1.196867] hub 2-1:1.0: enabling power on all ports
[    1.197816] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000
[    1.197993] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[    1.267016] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.295421] hub 2-1:1.0: port 5: status 0101 change 0001
[    1.361842] usb 1-1.2: skipped 1 descriptor after interface
[    1.362465] usb 1-1.2: default language 0x0409
[    1.365191] usb 1-1.2: udev 3, busnum 1, minor = 2
[    1.365202] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.365215] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.365226] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.365234] usb 1-1.2: Manufacturer: Logitech
[    1.365590] usb 1-1.2: usb_probe_device
[    1.365600] usb 1-1.2: configuration #1 chosen from 1 choice
[    1.366247] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[    1.366704] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[    1.390694] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[    1.390713] Switching to clocksource tsc
[    1.394696] usb 2-1: link qh256-0001/ffff88011871d3c0 start 1 [1/0 us]
[    1.438702] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.450730] ata4: SATA link down (SStatus 0 SControl 300)
[    1.676330] usb 1-1.4: skipped 1 descriptor after configuration
[    1.676342] usb 1-1.4: skipped 5 descriptors after interface
[    1.676349] usb 1-1.4: skipped 1 descriptor after endpoint
[    1.676354] usb 1-1.4: skipped 23 descriptors after interface
[    1.678687] usb 1-1.4: default language 0x0409
[    1.691100] usb 1-1.4: udev 4, busnum 1, minor = 3
[    1.691112] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.691126] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.691137] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.691145] usb 1-1.4: Manufacturer: 123
[    1.691539] usb 1-1.4: usb_probe_device
[    1.691550] usb 1-1.4: configuration #1 chosen from 1 choice
[    1.691645] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[    1.770454] ata5: SATA link down (SStatus 0 SControl 300)
[    1.773300] Freeing unused kernel memory: 1316k freed
[    1.773736] Write protecting the kernel read-only data: 12288k
[    1.781074] Freeing unused kernel memory: 1140k freed
[    1.787178] Freeing unused kernel memory: 1028k freed
[    1.844306] udevd[121]: starting version 175
[    1.863788] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[    1.863917] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004
[    1.864007] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000
[    1.864132] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[    1.934332] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.982271] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.982655] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.983081] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.983094] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.991911] hidraw: raw HID events driver (C) Jiri Kosina
[    1.996521] usbhid 1-1.2:1.0: usb_probe_interface
[    1.996531] usbhid 1-1.2:1.0: usb_probe_interface - got id
[    1.999948] usbcore: registered new interface driver usbhid
[    1.999960] usbhid: USB HID core driver
[    2.030646] usb 2-1.5: udev 3, busnum 2, minor = 130
[    2.030654] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.030663] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.031191] usb 2-1.5: usb_probe_device
[    2.031195] usb 2-1.5: configuration #1 chosen from 1 choice
[    2.031645] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
[    2.032057] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
[    2.057405] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    2.057623] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.864784] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   25.886652] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   25.927463] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   25.974004] udevd[600]: starting version 175
[   26.192630] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   26.192640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.192646] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   26.192651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.192654] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   26.192658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.192660] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   26.192664] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.192666] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.596490] lp: driver loaded but no devices found
[   26.734456] wmi: Mapper loaded
[   26.737432] samsung_laptop: detected SABI interface: SwSmi@
[   26.737437] samsung_laptop: Backlight controlled by ACPI video driver
[   26.852439] cfg80211: Calling CRDA to update world regulatory domain
[   27.090486] cfg80211: World regulatory domain updated:
[   27.090494] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.090500] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.090505] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.090509] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.090512] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.090516] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.127214] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   27.295121] ppdev: user-space parallel port driver
[   27.300414] Bluetooth: Core ver 2.16
[   27.300465] NET: Registered protocol family 31
[   27.300468] Bluetooth: HCI device and connection manager initialized
[   27.300485] Bluetooth: HCI socket layer initialized
[   27.300497] Bluetooth: L2CAP socket layer initialized
[   27.300521] Bluetooth: SCO socket layer initialized
[   27.301460] Linux video capture interface: v2.00
[   27.340942] type=1400 audit(1367401039.352:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=843 comm="apparmor_parser"
[   27.341094] type=1400 audit(1367401039.352:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
[   27.341540] type=1400 audit(1367401039.352:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=843 comm="apparmor_parser"
[   27.341895] type=1400 audit(1367401039.352:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=843 comm="apparmor_parser"
[   27.341946] type=1400 audit(1367401039.352:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[   27.342501] type=1400 audit(1367401039.352:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[   27.399238] init: failsafe main process (958) killed by TERM signal
[   27.535030] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   27.537782] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   27.540768] [drm] Initialized drm 1.1.0 20060810
[   27.541194] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   27.543607] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   27.612536] btusb 2-1.5:1.0: usb_probe_interface
[   27.612546] btusb 2-1.5:1.0: usb_probe_interface - got id
[   27.613615] usbcore: registered new interface driver btusb
[   27.616351] usb 2-1.5: link qh1-0e01/ffff8800913935c0 start 0 [1/2 us]
[   27.650998] type=1400 audit(1367401039.660:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1086 comm="apparmor_parser"
[   27.651785] type=1400 audit(1367401039.660:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1086 comm="apparmor_parser"
[   27.652288] type=1400 audit(1367401039.664:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1086 comm="apparmor_parser"
[   27.744858] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.744864] Bluetooth: BNEP filters: protocol multicast
[   27.744880] Bluetooth: BNEP socket layer initialized
[   27.745414] Bluetooth: RFCOMM TTY layer initialized
[   27.745436] Bluetooth: RFCOMM socket layer initialized
[   27.745439] Bluetooth: RFCOMM ver 1.11
[   27.997464] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   28.012542] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   28.093128] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[   28.114723] type=1400 audit(1367401040.124:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1085 comm="apparmor_parser"
[   28.170690] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   28.170694] Copyright(c) 2003-2013 Intel Corporation
[   28.171006] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   28.171845] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   28.306193] uvcvideo 1-1.4:1.0: usb_probe_interface
[   28.306200] uvcvideo 1-1.4:1.0: usb_probe_interface - got id
[   28.306250] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   28.325849] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   28.326021] usbcore: registered new interface driver uvcvideo
[   28.326024] USB Video Class driver (1.1.1)
[   28.330141] usb 1-1.4: link qh16-0001/ffff880091393240 start 2 [1/0 us]
[   28.330198] usb 1-1.4: unlink qh16-0001/ffff880091393240 start 2 [1/0 us]
[   28.459071] [drm] Memory usable by graphics device = 2048M
[   28.459084] i915 0000:00:02.0: setting latency timer to 64
[   28.490042] init: alsa-restore main process (1157) terminated with status 19
[   28.502127] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   28.502149] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   28.502152] [drm] Driver supports precise vblank timestamp query.
[   28.502457] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   28.519718] [drm] Wrong MCH_SSKPD value: 0x16040307
[   28.519723] [drm] This can cause pipe underruns and display issues.
[   28.519725] [drm] Please upgrade your BIOS to fix this.
[   28.528030] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   28.528036] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   28.528039] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   28.528042] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   28.528045] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   28.528049] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   28.528103] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   28.531721] fbcon: inteldrmfb (fb0) is primary device
[   28.601600] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   28.613299] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   28.619925] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   29.012157] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   29.018784] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   29.216911] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.542964] Console: switching to colour frame buffer device 170x48
[   29.545874] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   29.545875] i915 0000:00:02.0: registered panic notifier
[   29.564641] acpi device:33: registered as cooling_device9
[   29.565017] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   29.565327] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   29.565714] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   29.566082] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   29.618418] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   29.618726] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   29.619014] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   29.780701] usb 1-1.2: link qh8-0e01/ffff88008eeee4c0 start 3 [1/2 us]
[   29.790799] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   30.089220] init: plymouth-stop pre-start process (1470) terminated with status 1
[   30.805942] usb 1-1.4: usb auto-suspend, wakeup 0
[   31.620678] usb usb4: usb auto-resume
[   31.620695] hub 4-0:1.0: hub_resume
[   31.620725] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.620774] hub 4-0:1.0: hub_suspend
[   31.620780] usb usb4: bus auto-suspend, wakeup 1
[   31.620824] usb usb4: usb auto-resume
[   31.629254] hub 4-0:1.0: hub_resume
[   31.629280] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.629313] hub 4-0:1.0: hub_suspend
[   31.629317] usb usb4: bus auto-suspend, wakeup 1
[   31.629389] usb usb3: usb auto-resume
[   31.629406] hub 3-0:1.0: hub_resume
[   31.629423] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.629449] hub 3-0:1.0: hub_suspend
[   31.629453] usb usb3: bus auto-suspend, wakeup 1
[   31.629499] usb usb3: usb auto-resume
[   31.641264] hub 3-0:1.0: hub_resume
[   31.641300] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.641323] hub 3-0:1.0: hub_suspend
[   31.641330] usb usb3: bus auto-suspend, wakeup 1
[   31.641961] usb 1-1.4: usb auto-resume
[   31.689303] usb 1-1.4: finish resume
[   31.696861] usb usb4: usb auto-resume
[   31.696887] hub 4-0:1.0: hub_resume
[   31.696941] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.696992] hub 4-0:1.0: hub_suspend
[   31.697008] usb usb4: bus auto-suspend, wakeup 1
[   31.697124] usb usb4: usb auto-resume
[   31.705243] hub 4-0:1.0: hub_resume
[   31.705281] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.705322] hub 4-0:1.0: hub_suspend
[   31.705330] usb usb4: bus auto-suspend, wakeup 1
[   31.705425] usb usb3: usb auto-resume
[   31.705444] hub 3-0:1.0: hub_resume
[   31.705467] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.705483] hub 3-0:1.0: hub_suspend
[   31.705489] usb usb3: bus auto-suspend, wakeup 1
[   31.705556] usb usb3: usb auto-resume
[   31.717195] hub 3-0:1.0: hub_resume
[   31.717231] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.717257] hub 3-0:1.0: hub_suspend
[   31.717264] usb usb3: bus auto-suspend, wakeup 1
[   31.718566] usb usb4: usb auto-resume
[   31.718590] hub 4-0:1.0: hub_resume
[   31.718624] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.718667] hub 4-0:1.0: hub_suspend
[   31.718674] usb usb4: bus auto-suspend, wakeup 1
[   31.718738] usb usb4: usb auto-resume
[   31.729243] hub 4-0:1.0: hub_resume
[   31.729274] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.729304] hub 4-0:1.0: hub_suspend
[   31.729313] usb usb4: bus auto-suspend, wakeup 1
[   31.729404] usb usb3: usb auto-resume
[   31.729423] hub 3-0:1.0: hub_resume
[   31.729444] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.729477] hub 3-0:1.0: hub_suspend
[   31.729483] usb usb3: bus auto-suspend, wakeup 1
[   31.729548] usb usb3: usb auto-resume
[   31.741183] hub 3-0:1.0: hub_resume
[   31.741214] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.741226] hub 3-0:1.0: hub_suspend
[   31.741234] usb usb3: bus auto-suspend, wakeup 1
[   31.746377] usb usb4: usb auto-resume
[   31.746396] hub 4-0:1.0: hub_resume
[   31.746436] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.746473] hub 4-0:1.0: hub_suspend
[   31.746480] usb usb4: bus auto-suspend, wakeup 1
[   31.746502] usb usb4: usb auto-resume
[   31.757784] hub 4-0:1.0: hub_resume
[   31.757818] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.757854] hub 4-0:1.0: hub_suspend
[   31.757863] usb usb4: bus auto-suspend, wakeup 1
[   31.757957] usb usb3: usb auto-resume
[   31.757976] hub 3-0:1.0: hub_resume
[   31.758068] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.758082] hub 3-0:1.0: hub_suspend
[   31.758088] usb usb3: bus auto-suspend, wakeup 1
[   31.758167] usb usb3: usb auto-resume
[   31.769159] hub 3-0:1.0: hub_resume
[   31.769187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.769198] hub 3-0:1.0: hub_suspend
[   31.769204] usb usb3: bus auto-suspend, wakeup 1
[   31.781280] usb usb4: usb auto-resume
[   31.781299] hub 4-0:1.0: hub_resume
[   31.781323] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.781390] hub 4-0:1.0: hub_suspend
[   31.781396] usb usb4: bus auto-suspend, wakeup 1
[   31.781440] usb usb4: usb auto-resume
[   31.793171] hub 4-0:1.0: hub_resume
[   31.793209] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.793246] hub 4-0:1.0: hub_suspend
[   31.793254] usb usb4: bus auto-suspend, wakeup 1
[   31.793377] usb usb3: usb auto-resume
[   31.793399] hub 3-0:1.0: hub_resume
[   31.793426] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.793601] hub 3-0:1.0: hub_suspend
[   31.793611] usb usb3: bus auto-suspend, wakeup 1
[   31.793716] usb usb3: usb auto-resume
[   31.805150] hub 3-0:1.0: hub_resume
[   31.805263] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.805281] hub 3-0:1.0: hub_suspend
[   31.805289] usb usb3: bus auto-suspend, wakeup 1
[   31.808336] usb usb4: usb auto-resume
[   31.808358] hub 4-0:1.0: hub_resume
[   31.808531] usb usb3: usb auto-resume
[   31.808562] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.808604] hub 4-0:1.0: hub_suspend
[   31.808611] usb usb4: bus auto-suspend, wakeup 1
[   31.817139] hub 3-0:1.0: hub_resume
[   31.817174] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.817205] hub 3-0:1.0: hub_suspend
[   31.817211] usb usb3: bus auto-suspend, wakeup 1
[   31.817292] usb usb3: usb auto-resume
[   31.829122] hub 3-0:1.0: hub_resume
[   31.829156] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.829183] hub 3-0:1.0: hub_suspend
[   31.829190] usb usb3: bus auto-suspend, wakeup 1
[   31.830098] usb usb4: usb auto-resume
[   31.830113] hub 4-0:1.0: hub_resume
[   31.830138] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.830177] hub 4-0:1.0: hub_suspend
[   31.830183] usb usb4: bus auto-suspend, wakeup 1
[   31.830224] usb usb4: usb auto-resume
[   31.841104] hub 4-0:1.0: hub_resume
[   31.841133] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.841176] hub 4-0:1.0: hub_suspend
[   31.841182] usb usb4: bus auto-suspend, wakeup 1
[   31.841250] usb usb3: usb auto-resume
[   31.841266] hub 3-0:1.0: hub_resume
[   31.841284] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.841302] hub 3-0:1.0: hub_suspend
[   31.841306] usb usb3: bus auto-suspend, wakeup 1
[   31.841352] usb usb3: usb auto-resume
[   31.853100] hub 3-0:1.0: hub_resume
[   31.853136] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.853155] hub 3-0:1.0: hub_suspend
[   31.853165] usb usb3: bus auto-suspend, wakeup 1
[   31.856828] usb usb4: usb auto-resume
[   31.856844] hub 4-0:1.0: hub_resume
[   31.856873] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.856924] hub 4-0:1.0: hub_suspend
[   31.856931] usb usb4: bus auto-suspend, wakeup 1
[   31.856984] usb usb4: usb auto-resume
[   31.869120] hub 4-0:1.0: hub_resume
[   31.869221] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.869266] hub 4-0:1.0: hub_suspend
[   31.869272] usb usb4: bus auto-suspend, wakeup 1
[   31.869297] usb usb3: usb auto-resume
[   31.869314] hub 3-0:1.0: hub_resume
[   31.869346] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.869355] hub 3-0:1.0: hub_suspend
[   31.869359] usb usb3: bus auto-suspend, wakeup 1
[   31.869375] usb usb3: usb auto-resume
[   31.881125] hub 3-0:1.0: hub_resume
[   31.881212] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.881249] hub 3-0:1.0: hub_suspend
[   31.881259] usb usb3: bus auto-suspend, wakeup 1
[   31.882091] usb usb4: usb auto-resume
[   31.882107] hub 4-0:1.0: hub_resume
[   31.882161] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.882213] hub 4-0:1.0: hub_suspend
[   31.882216] usb usb3: usb auto-resume
[   31.882222] usb usb4: bus auto-suspend, wakeup 1
[   31.893115] hub 3-0:1.0: hub_resume
[   31.893215] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.893233] hub 3-0:1.0: hub_suspend
[   31.893240] usb usb3: bus auto-suspend, wakeup 1
[   31.893262] usb usb3: usb auto-resume
[   31.905103] hub 3-0:1.0: hub_resume
[   31.905170] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.905181] hub 3-0:1.0: hub_suspend
[   31.905187] usb usb3: bus auto-suspend, wakeup 1
[   31.907219] usb usb4: usb auto-resume
[   31.907235] hub 4-0:1.0: hub_resume
[   31.907268] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.907311] hub 4-0:1.0: hub_suspend
[   31.907318] usb usb4: bus auto-suspend, wakeup 1
[   31.907408] usb usb4: usb auto-resume
[   31.917091] hub 4-0:1.0: hub_resume
[   31.917177] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.917215] hub 4-0:1.0: hub_suspend
[   31.917221] usb usb4: bus auto-suspend, wakeup 1
[   31.917231] usb usb3: usb auto-resume
[   31.917249] hub 3-0:1.0: hub_resume
[   31.917283] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.917298] hub 3-0:1.0: hub_suspend
[   31.917303] usb usb3: bus auto-suspend, wakeup 1
[   31.917334] usb usb3: usb auto-resume
[   31.929075] hub 3-0:1.0: hub_resume
[   31.929156] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.929175] hub 3-0:1.0: hub_suspend
[   31.929182] usb usb3: bus auto-suspend, wakeup 1
[   31.930470] usb usb4: usb auto-resume
[   31.930487] hub 4-0:1.0: hub_resume
[   31.930542] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.930579] hub 4-0:1.0: hub_suspend
[   31.930584] usb usb4: bus auto-suspend, wakeup 1
[   31.930621] usb usb4: usb auto-resume
[   31.941059] hub 4-0:1.0: hub_resume
[   31.941117] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.941221] hub 4-0:1.0: hub_suspend
[   31.941237] usb usb4: bus auto-suspend, wakeup 1
[   31.941413] usb usb3: usb auto-resume
[   31.941437] hub 3-0:1.0: hub_resume
[   31.941480] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.941522] hub 3-0:1.0: hub_suspend
[   31.941533] usb usb3: bus auto-suspend, wakeup 1
[   31.941651] usb usb3: usb auto-resume
[   31.953072] hub 3-0:1.0: hub_resume
[   31.953142] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   31.953183] hub 3-0:1.0: hub_suspend
[   31.953212] usb usb3: bus auto-suspend, wakeup 1
[   32.958183] usb usb4: usb auto-resume
[   32.958209] hub 4-0:1.0: hub_resume
[   32.958305] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.958373] hub 4-0:1.0: hub_suspend
[   32.958386] usb usb4: bus auto-suspend, wakeup 1
[   32.958469] usb usb4: usb auto-resume
[   32.968348] hub 4-0:1.0: hub_resume
[   32.968408] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.968470] hub 4-0:1.0: hub_suspend
[   32.968482] usb usb4: bus auto-suspend, wakeup 1
[   32.968539] usb usb3: usb auto-resume
[   32.968562] hub 3-0:1.0: hub_resume
[   32.968638] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.968674] hub 3-0:1.0: hub_suspend
[   32.968687] usb usb3: bus auto-suspend, wakeup 1
[   32.968749] usb usb3: usb auto-resume
[   32.980393] hub 3-0:1.0: hub_resume
[   32.980511] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.980552] hub 3-0:1.0: hub_suspend
[   32.980567] usb usb3: bus auto-suspend, wakeup 1
[   32.984508] usb usb4: usb auto-resume
[   32.984534] hub 4-0:1.0: hub_resume
[   32.984579] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.984658] hub 4-0:1.0: hub_suspend
[   32.984668] usb usb4: bus auto-suspend, wakeup 1
[   32.984766] usb usb4: usb auto-resume
[   32.996321] hub 4-0:1.0: hub_resume
[   32.996375] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.996441] hub 4-0:1.0: hub_suspend
[   32.996454] usb usb4: bus auto-suspend, wakeup 1
[   32.996605] usb usb3: usb auto-resume
[   32.996626] hub 3-0:1.0: hub_resume
[   32.996657] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.996699] hub 3-0:1.0: hub_suspend
[   32.996707] usb usb3: bus auto-suspend, wakeup 1
[   32.996806] usb usb3: usb auto-resume
[   33.008311] hub 3-0:1.0: hub_resume
[   33.008371] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.008399] hub 3-0:1.0: hub_suspend
[   33.008411] usb usb3: bus auto-suspend, wakeup 1
[   33.010374] usb usb4: usb auto-resume
[   33.010395] hub 4-0:1.0: hub_resume
[   33.010446] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.010496] hub 4-0:1.0: hub_suspend
[   33.010505] usb usb4: bus auto-suspend, wakeup 1
[   33.010524] usb usb4: usb auto-resume
[   33.020310] hub 4-0:1.0: hub_resume
[   33.020404] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.020470] hub 4-0:1.0: hub_suspend
[   33.020482] usb usb4: bus auto-suspend, wakeup 1
[   33.020499] usb usb3: usb auto-resume
[   33.020521] hub 3-0:1.0: hub_resume
[   33.020558] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.020572] hub 3-0:1.0: hub_suspend
[   33.020581] usb usb3: bus auto-suspend, wakeup 1
[   33.020680] usb usb3: usb auto-resume
[   33.032310] hub 3-0:1.0: hub_resume
[   33.032379] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.032435] hub 3-0:1.0: hub_suspend
[   33.032454] usb usb3: bus auto-suspend, wakeup 1
[   33.050347] usb usb4: usb auto-resume
[   33.050371] hub 4-0:1.0: hub_resume
[   33.050468] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.050538] hub 4-0:1.0: hub_suspend
[   33.050551] usb usb4: bus auto-suspend, wakeup 1
[   33.050634] usb usb4: usb auto-resume
[   33.060287] hub 4-0:1.0: hub_resume
[   33.060343] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.060396] hub 4-0:1.0: hub_suspend
[   33.060406] usb usb4: bus auto-suspend, wakeup 1
[   33.060439] usb usb3: usb auto-resume
[   33.060460] hub 3-0:1.0: hub_resume
[   33.060528] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.060556] hub 3-0:1.0: hub_suspend
[   33.060567] usb usb3: bus auto-suspend, wakeup 1
[   33.060639] usb usb3: usb auto-resume
[   33.072275] hub 3-0:1.0: hub_resume
[   33.072347] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.072381] hub 3-0:1.0: hub_suspend
[   33.072394] usb usb3: bus auto-suspend, wakeup 1
[   33.073860] usb usb4: usb auto-resume
[   33.073880] hub 4-0:1.0: hub_resume
[   33.073963] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.074029] hub 4-0:1.0: hub_suspend
[   33.074041] usb usb4: bus auto-suspend, wakeup 1
[   33.074126] usb usb4: usb auto-resume
[   33.084270] hub 4-0:1.0: hub_resume
[   33.084338] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.084401] hub 4-0:1.0: hub_suspend
[   33.084413] usb usb4: bus auto-suspend, wakeup 1
[   33.084458] usb usb3: usb auto-resume
[   33.084480] hub 3-0:1.0: hub_resume
[   33.084558] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.084593] hub 3-0:1.0: hub_suspend
[   33.084606] usb usb3: bus auto-suspend, wakeup 1
[   33.084666] usb usb3: usb auto-resume
[   33.096258] hub 3-0:1.0: hub_resume
[   33.096322] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.096363] hub 3-0:1.0: hub_suspend
[   33.096379] usb usb3: bus auto-suspend, wakeup 1
[   33.098482] usb usb4: usb auto-resume
[   33.098504] hub 4-0:1.0: hub_resume
[   33.098587] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.098654] hub 4-0:1.0: hub_suspend
[   33.098666] usb usb4: bus auto-suspend, wakeup 1
[   33.098748] usb usb4: usb auto-resume
[   33.108308] hub 4-0:1.0: hub_resume
[   33.108429] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.108516] hub 4-0:1.0: hub_suspend
[   33.108531] usb usb4: bus auto-suspend, wakeup 1
[   33.108576] usb usb3: usb auto-resume
[   33.108599] hub 3-0:1.0: hub_resume
[   33.108680] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.108716] hub 3-0:1.0: hub_suspend
[   33.108729] usb usb3: bus auto-suspend, wakeup 1
[   33.108764] usb usb3: usb auto-resume
[   33.120295] hub 3-0:1.0: hub_resume
[   33.120416] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.120470] hub 3-0:1.0: hub_suspend
[   33.120488] usb usb3: bus auto-suspend, wakeup 1
[   33.122733] usb usb4: usb auto-resume
[   33.122755] hub 4-0:1.0: hub_resume
[   33.122843] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.122912] hub 4-0:1.0: hub_suspend
[   33.122924] usb usb4: bus auto-suspend, wakeup 1
[   33.123012] usb usb4: usb auto-resume
[   33.132276] hub 4-0:1.0: hub_resume
[   33.132397] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.132485] hub 4-0:1.0: hub_suspend
[   33.132500] usb usb4: bus auto-suspend, wakeup 1
[   33.132548] usb usb3: usb auto-resume
[   33.132572] hub 3-0:1.0: hub_resume
[   33.132651] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.132687] hub 3-0:1.0: hub_suspend
[   33.132700] usb usb3: bus auto-suspend, wakeup 1
[   33.132740] usb usb3: usb auto-resume
[   33.144272] hub 3-0:1.0: hub_resume
[   33.144397] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.144450] hub 3-0:1.0: hub_suspend
[   33.144468] usb usb3: bus auto-suspend, wakeup 1
[   33.149741] usb usb4: usb auto-resume
[   33.149764] hub 4-0:1.0: hub_resume
[   33.149856] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.149924] hub 4-0:1.0: hub_suspend
[   33.149936] usb usb4: bus auto-suspend, wakeup 1
[   33.150019] usb usb4: usb auto-resume
[   33.160247] hub 4-0:1.0: hub_resume
[   33.160368] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.160440] hub 4-0:1.0: hub_suspend
[   33.160453] usb usb4: bus auto-suspend, wakeup 1
[   33.160498] usb usb3: usb auto-resume
[   33.160521] hub 3-0:1.0: hub_resume
[   33.160600] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.160636] hub 3-0:1.0: hub_suspend
[   33.160649] usb usb3: bus auto-suspend, wakeup 1
[   33.160686] usb usb3: usb auto-resume
[   33.172256] hub 3-0:1.0: hub_resume
[   33.172374] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.172415] hub 3-0:1.0: hub_suspend
[   33.172430] usb usb3: bus auto-suspend, wakeup 1
[   33.178480] usb usb4: usb auto-resume
[   33.178503] hub 4-0:1.0: hub_resume
[   33.178555] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.178630] hub 4-0:1.0: hub_suspend
[   33.178645] usb usb4: bus auto-suspend, wakeup 1
[   33.178701] usb usb4: usb auto-resume
[   33.188256] hub 4-0:1.0: hub_resume
[   33.188369] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.188444] hub 4-0:1.0: hub_suspend
[   33.188457] usb usb4: bus auto-suspend, wakeup 1
[   33.188512] usb usb3: usb auto-resume
[   33.188535] hub 3-0:1.0: hub_resume
[   33.188615] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.188651] hub 3-0:1.0: hub_suspend
[   33.188663] usb usb3: bus auto-suspend, wakeup 1
[   33.188708] usb usb3: usb auto-resume
[   33.200361] hub 3-0:1.0: hub_resume
[   33.200438] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.200482] hub 3-0:1.0: hub_suspend
[   33.200501] usb usb3: bus auto-suspend, wakeup 1
[   33.203056] usb usb4: usb auto-resume
[   33.203083] hub 4-0:1.0: hub_resume
[   33.203183] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.203252] hub 4-0:1.0: hub_suspend
[   33.203264] usb usb4: bus auto-suspend, wakeup 1
[   33.203294] usb usb4: usb auto-resume
[   33.212159] hub 4-0:1.0: hub_resume
[   33.212256] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.212323] hub 4-0:1.0: hub_suspend
[   33.212334] usb usb4: bus auto-suspend, wakeup 1
[   33.212340] usb usb3: usb auto-resume
[   33.212365] hub 3-0:1.0: hub_resume
[   33.212411] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.212432] hub 3-0:1.0: hub_suspend
[   33.212440] usb usb3: bus auto-suspend, wakeup 1
[   33.212492] usb usb3: usb auto-resume
[   33.224175] hub 3-0:1.0: hub_resume
[   33.224275] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.224310] hub 3-0:1.0: hub_suspend
[   33.224323] usb usb3: bus auto-suspend, wakeup 1
[   33.231542] usb usb4: usb auto-resume
[   33.231565] hub 4-0:1.0: hub_resume
[   33.231652] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.231720] hub 4-0:1.0: hub_suspend
[   33.231734] usb usb4: bus auto-suspend, wakeup 1
[   33.231815] usb usb4: usb auto-resume
[   33.240198] hub 4-0:1.0: hub_resume
[   33.240319] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.240405] hub 4-0:1.0: hub_suspend
[   33.240420] usb usb4: bus auto-suspend, wakeup 1
[   33.240471] usb usb3: usb auto-resume
[   33.240494] hub 3-0:1.0: hub_resume
[   33.240575] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.240611] hub 3-0:1.0: hub_suspend
[   33.240624] usb usb3: bus auto-suspend, wakeup 1
[   33.240667] usb usb3: usb auto-resume
[   33.252212] hub 3-0:1.0: hub_resume
[   33.252336] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.252390] hub 3-0:1.0: hub_suspend
[   33.252408] usb usb3: bus auto-suspend, wakeup 1
[   33.254475] usb usb4: usb auto-resume
[   33.254496] hub 4-0:1.0: hub_resume
[   33.254583] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.254651] hub 4-0:1.0: hub_suspend
[   33.254663] usb usb4: bus auto-suspend, wakeup 1
[   33.254749] usb usb4: usb auto-resume
[   33.264199] hub 4-0:1.0: hub_resume
[   33.264320] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.264409] hub 4-0:1.0: hub_suspend
[   33.264425] usb usb4: bus auto-suspend, wakeup 1
[   33.264474] usb usb3: usb auto-resume
[   33.264498] hub 3-0:1.0: hub_resume
[   33.264578] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.264615] hub 3-0:1.0: hub_suspend
[   33.264628] usb usb3: bus auto-suspend, wakeup 1
[   33.264669] usb usb3: usb auto-resume
[   33.276173] hub 3-0:1.0: hub_resume
[   33.276293] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.276345] hub 3-0:1.0: hub_suspend
[   33.276365] usb usb3: bus auto-suspend, wakeup 1
[   33.278437] usb usb4: usb auto-resume
[   33.278458] hub 4-0:1.0: hub_resume
[   33.278543] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.278612] hub 4-0:1.0: hub_suspend
[   33.278624] usb usb4: bus auto-suspend, wakeup 1
[   33.278704] usb usb4: usb auto-resume
[   33.288180] hub 4-0:1.0: hub_resume
[   33.288304] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.288391] hub 4-0:1.0: hub_suspend
[   33.288407] usb usb4: bus auto-suspend, wakeup 1
[   33.288460] usb usb3: usb auto-resume
[   33.288483] hub 3-0:1.0: hub_resume
[   33.288565] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.288601] hub 3-0:1.0: hub_suspend
[   33.288614] usb usb3: bus auto-suspend, wakeup 1
[   33.288657] usb usb3: usb auto-resume
[   33.300176] hub 3-0:1.0: hub_resume
[   33.300298] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.300351] hub 3-0:1.0: hub_suspend
[   33.300368] usb usb3: bus auto-suspend, wakeup 1
[   33.302656] usb usb4: usb auto-resume
[   33.302678] hub 4-0:1.0: hub_resume
[   33.302764] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.302833] hub 4-0:1.0: hub_suspend
[   33.302845] usb usb4: bus auto-suspend, wakeup 1
[   33.302931] usb usb4: usb auto-resume
[   33.312163] hub 4-0:1.0: hub_resume
[   33.312284] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.312370] hub 4-0:1.0: hub_suspend
[   33.312386] usb usb4: bus auto-suspend, wakeup 1
[   33.312439] usb usb3: usb auto-resume
[   33.312462] hub 3-0:1.0: hub_resume
[   33.312542] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.312579] hub 3-0:1.0: hub_suspend
[   33.312591] usb usb3: bus auto-suspend, wakeup 1
[   33.312631] usb usb3: usb auto-resume
[   33.324161] hub 3-0:1.0: hub_resume
[   33.324282] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.324336] hub 3-0:1.0: hub_suspend
[   33.324355] usb usb3: bus auto-suspend, wakeup 1
[   33.326596] usb usb4: usb auto-resume
[   33.326617] hub 4-0:1.0: hub_resume
[   33.326703] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.326771] hub 4-0:1.0: hub_suspend
[   33.326783] usb usb4: bus auto-suspend, wakeup 1
[   33.326862] usb usb4: usb auto-resume
[   33.336144] hub 4-0:1.0: hub_resume
[   33.336265] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.336351] hub 4-0:1.0: hub_suspend
[   33.336365] usb usb4: bus auto-suspend, wakeup 1
[   33.336419] usb usb3: usb auto-resume
[   33.336442] hub 3-0:1.0: hub_resume
[   33.336523] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.336559] hub 3-0:1.0: hub_suspend
[   33.336571] usb usb3: bus auto-suspend, wakeup 1
[   33.336614] usb usb3: usb auto-resume
[   33.348144] hub 3-0:1.0: hub_resume
[   33.348268] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.348321] hub 3-0:1.0: hub_suspend
[   33.348336] usb usb3: bus auto-suspend, wakeup 1
[   33.351580] usb usb4: usb auto-resume
[   33.351602] hub 4-0:1.0: hub_resume
[   33.351688] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.351756] hub 4-0:1.0: hub_suspend
[   33.351769] usb usb4: bus auto-suspend, wakeup 1
[   33.351855] usb usb4: usb auto-resume
[   33.360074] hub 4-0:1.0: hub_resume
[   33.360173] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.360240] hub 4-0:1.0: hub_suspend
[   33.360252] usb usb4: bus auto-suspend, wakeup 1
[   33.360264] usb usb3: usb auto-resume
[   33.360286] hub 3-0:1.0: hub_resume
[   33.360329] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.360365] hub 3-0:1.0: hub_suspend
[   33.360375] usb usb3: bus auto-suspend, wakeup 1
[   33.360425] usb usb3: usb auto-resume
[   33.372124] hub 3-0:1.0: hub_resume
[   33.372245] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.372298] hub 3-0:1.0: hub_suspend
[   33.372317] usb usb3: bus auto-suspend, wakeup 1
[   33.377033] usb usb4: usb auto-resume
[   33.377055] hub 4-0:1.0: hub_resume
[   33.377145] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.377214] hub 4-0:1.0: hub_suspend
[   33.377227] usb usb4: bus auto-suspend, wakeup 1
[   33.377308] usb usb4: usb auto-resume
[   33.388102] hub 4-0:1.0: hub_resume
[   33.388225] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.388310] hub 4-0:1.0: hub_suspend
[   33.388324] usb usb4: bus auto-suspend, wakeup 1
[   33.388370] usb usb3: usb auto-resume
[   33.388393] hub 3-0:1.0: hub_resume
[   33.388474] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.388510] hub 3-0:1.0: hub_suspend
[   33.388523] usb usb3: bus auto-suspend, wakeup 1
[   33.388560] usb usb3: usb auto-resume
[   33.400098] hub 3-0:1.0: hub_resume
[   33.400221] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.400273] hub 3-0:1.0: hub_suspend
[   33.400290] usb usb3: bus auto-suspend, wakeup 1
[   33.402484] usb usb4: usb auto-resume
[   33.402506] hub 4-0:1.0: hub_resume
[   33.402593] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.402661] hub 4-0:1.0: hub_suspend
[   33.402674] usb usb4: bus auto-suspend, wakeup 1
[   33.402761] usb usb4: usb auto-resume
[   33.412087] hub 4-0:1.0: hub_resume
[   33.412210] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.412295] hub 4-0:1.0: hub_suspend
[   33.412310] usb usb4: bus auto-suspend, wakeup 1
[   33.412369] usb usb3: usb auto-resume
[   33.412392] hub 3-0:1.0: hub_resume
[   33.412474] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.412509] hub 3-0:1.0: hub_suspend
[   33.412522] usb usb3: bus auto-suspend, wakeup 1
[   33.412566] usb usb3: usb auto-resume
[   33.424081] hub 3-0:1.0: hub_resume
[   33.424204] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.424261] hub 3-0:1.0: hub_suspend
[   33.424278] usb usb3: bus auto-suspend, wakeup 1
[   33.426815] usb usb4: usb auto-resume
[   33.426838] hub 4-0:1.0: hub_resume
[   33.426925] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.426994] hub 4-0:1.0: hub_suspend
[   33.427006] usb usb4: bus auto-suspend, wakeup 1
[   33.427093] usb usb4: usb auto-resume
[   33.436070] hub 4-0:1.0: hub_resume
[   33.436194] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.436281] hub 4-0:1.0: hub_suspend
[   33.436295] usb usb4: bus auto-suspend, wakeup 1
[   33.436351] usb usb3: usb auto-resume
[   33.436374] hub 3-0:1.0: hub_resume
[   33.436455] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.436491] hub 3-0:1.0: hub_suspend
[   33.436504] usb usb3: bus auto-suspend, wakeup 1
[   33.436546] usb usb3: usb auto-resume
[   33.448036] hub 3-0:1.0: hub_resume
[   33.448111] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.448167] hub 3-0:1.0: hub_suspend
[   33.448185] usb usb3: bus auto-suspend, wakeup 1
[   33.450813] usb usb4: usb auto-resume
[   33.450835] hub 4-0:1.0: hub_resume
[   33.450884] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.450934] hub 4-0:1.0: hub_suspend
[   33.450943] usb usb4: bus auto-suspend, wakeup 1
[   33.451037] usb usb4: usb auto-resume
[   33.460005] hub 4-0:1.0: hub_resume
[   33.460067] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.460134] hub 4-0:1.0: hub_suspend
[   33.460150] usb usb4: bus auto-suspend, wakeup 1
[   33.460241] usb usb3: usb auto-resume
[   33.460262] hub 3-0:1.0: hub_resume
[   33.460298] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.460359] hub 3-0:1.0: hub_suspend
[   33.460368] usb usb3: bus auto-suspend, wakeup 1
[   33.460468] usb usb3: usb auto-resume
[   33.472005] hub 3-0:1.0: hub_resume
[   33.472065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.472099] hub 3-0:1.0: hub_suspend
[   33.472112] usb usb3: bus auto-suspend, wakeup 1
[   33.475048] usb usb4: usb auto-resume
[   33.475068] hub 4-0:1.0: hub_resume
[   33.475113] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.475162] hub 4-0:1.0: hub_suspend
[   33.475171] usb usb4: bus auto-suspend, wakeup 1
[   33.475265] usb usb4: usb auto-resume
[   33.483999] hub 4-0:1.0: hub_resume
[   33.484101] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.484168] hub 4-0:1.0: hub_suspend
[   33.484180] usb usb4: bus auto-suspend, wakeup 1
[   33.484195] usb usb3: usb auto-resume
[   33.484217] hub 3-0:1.0: hub_resume
[   33.484255] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.484270] hub 3-0:1.0: hub_suspend
[   33.484279] usb usb3: bus auto-suspend, wakeup 1
[   33.484376] usb usb3: usb auto-resume
[   33.496042] hub 3-0:1.0: hub_resume
[   33.496163] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.496216] hub 3-0:1.0: hub_suspend
[   33.496233] usb usb3: bus auto-suspend, wakeup 1
[   34.500000] usb usb4: usb auto-resume
[   34.500027] hub 4-0:1.0: hub_resume
[   34.500123] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.500193] hub 4-0:1.0: hub_suspend
[   34.500206] usb usb4: bus auto-suspend, wakeup 1
[   34.500288] usb usb4: usb auto-resume
[   34.511264] hub 4-0:1.0: hub_resume
[   34.511327] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.511391] hub 4-0:1.0: hub_suspend
[   34.511402] usb usb4: bus auto-suspend, wakeup 1
[   34.511456] usb usb3: usb auto-resume
[   34.511478] hub 3-0:1.0: hub_resume
[   34.511557] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.511593] hub 3-0:1.0: hub_suspend
[   34.511606] usb usb3: bus auto-suspend, wakeup 1
[   34.511665] usb usb3: usb auto-resume
[   34.523304] hub 3-0:1.0: hub_resume
[   34.523421] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.523461] hub 3-0:1.0: hub_suspend
[   34.523475] usb usb3: bus auto-suspend, wakeup 1
[   34.528170] usb usb4: usb auto-resume
[   34.528192] hub 4-0:1.0: hub_resume
[   34.528284] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.528351] hub 4-0:1.0: hub_suspend
[   34.528364] usb usb4: bus auto-suspend, wakeup 1
[   34.528448] usb usb4: usb auto-resume
[   34.539301] hub 4-0:1.0: hub_resume
[   34.539421] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.539507] hub 4-0:1.0: hub_suspend
[   34.539522] usb usb4: bus auto-suspend, wakeup 1
[   34.539572] usb usb3: usb auto-resume
[   34.539596] hub 3-0:1.0: hub_resume
[   34.539675] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.539712] hub 3-0:1.0: hub_suspend
[   34.539725] usb usb3: bus auto-suspend, wakeup 1
[   34.539762] usb usb3: usb auto-resume
[   34.551409] hub 3-0:1.0: hub_resume
[   34.551526] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.551566] hub 3-0:1.0: hub_suspend
[   34.551580] usb usb3: bus auto-suspend, wakeup 1
[   34.556940] usb usb4: usb auto-resume
[   34.556962] hub 4-0:1.0: hub_resume
[   34.557053] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.557121] hub 4-0:1.0: hub_suspend
[   34.557133] usb usb4: bus auto-suspend, wakeup 1
[   34.557218] usb usb4: usb auto-resume
[   34.567264] hub 4-0:1.0: hub_resume
[   34.567384] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.567470] hub 4-0:1.0: hub_suspend
[   34.567484] usb usb4: bus auto-suspend, wakeup 1
[   34.567535] usb usb3: usb auto-resume
[   34.567558] hub 3-0:1.0: hub_resume
[   34.567639] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.567675] hub 3-0:1.0: hub_suspend
[   34.567688] usb usb3: bus auto-suspend, wakeup 1
[   34.567732] usb usb3: usb auto-resume
[   34.579262] hub 3-0:1.0: hub_resume
[   34.579386] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.579440] hub 3-0:1.0: hub_suspend
[   34.579457] usb usb3: bus auto-suspend, wakeup 1
[   34.582281] usb usb4: usb auto-resume
[   34.582304] hub 4-0:1.0: hub_resume
[   34.582360] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.582440] hub 4-0:1.0: hub_suspend
[   34.582458] usb usb4: bus auto-suspend, wakeup 1
[   34.582499] usb usb4: usb auto-resume
[   34.591168] hub 4-0:1.0: hub_resume
[   34.591260] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.591327] hub 4-0:1.0: hub_suspend
[   34.591340] usb usb4: bus auto-suspend, wakeup 1
[   34.591345] usb usb3: usb auto-resume
[   34.591368] hub 3-0:1.0: hub_resume
[   34.591409] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.591449] hub 3-0:1.0: hub_suspend
[   34.591460] usb usb3: bus auto-suspend, wakeup 1
[   34.591560] usb usb3: usb auto-resume
[   34.603159] hub 3-0:1.0: hub_resume
[   34.603251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.603288] hub 3-0:1.0: hub_suspend
[   34.603300] usb usb3: bus auto-suspend, wakeup 1
[   34.606774] usb usb4: usb auto-resume
[   34.606799] hub 4-0:1.0: hub_resume
[   34.606870] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.606950] hub 4-0:1.0: hub_suspend
[   34.606966] usb usb4: bus auto-suspend, wakeup 1
[   34.607014] usb usb4: usb auto-resume
[   34.615395] hub 4-0:1.0: hub_resume
[   34.615686] usb usb3: usb auto-resume
[   34.615715] hub 3-0:1.0: hub_resume
[   34.616961] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.616989] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.617047] hub 4-0:1.0: hub_suspend
[   34.617064] usb usb4: bus auto-suspend, wakeup 1
[   34.617088] hub 3-0:1.0: hub_suspend
[   34.617098] usb usb3: bus auto-suspend, wakeup 1
[   34.623326] usb usb4: usb auto-resume
[   34.635155] hub 4-0:1.0: hub_resume
[   34.635211] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.635302] hub 4-0:1.0: hub_suspend
[   34.635315] usb usb4: bus auto-suspend, wakeup 1
[   34.635431] usb usb4: usb auto-resume
[   34.647119] hub 4-0:1.0: hub_resume
[   34.647162] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.647225] hub 4-0:1.0: hub_suspend
[   34.647235] usb usb4: bus auto-suspend, wakeup 1
[   34.647358] usb usb3: usb auto-resume
[   34.647379] hub 3-0:1.0: hub_resume
[   34.647412] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.647436] hub 3-0:1.0: hub_suspend
[   34.647448] usb usb3: bus auto-suspend, wakeup 1
[   34.647556] usb usb3: usb auto-resume
[   34.659178] hub 3-0:1.0: hub_resume
[   34.659233] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.659288] hub 3-0:1.0: hub_suspend
[   34.659307] usb usb3: bus auto-suspend, wakeup 1
[   34.664493] usb usb4: usb auto-resume
[   34.664514] hub 4-0:1.0: hub_resume
[   34.664561] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.664639] hub 4-0:1.0: hub_suspend
[   34.664649] usb usb4: bus auto-suspend, wakeup 1
[   34.664747] usb usb4: usb auto-resume
[   34.675127] hub 4-0:1.0: hub_resume
[   34.675238] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.675309] hub 4-0:1.0: hub_suspend
[   34.675322] usb usb4: bus auto-suspend, wakeup 1
[   34.675404] usb usb3: usb auto-resume
[   34.675433] hub 3-0:1.0: hub_resume
[   34.675522] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.675558] hub 3-0:1.0: hub_suspend
[   34.675571] usb usb3: bus auto-suspend, wakeup 1
[   34.675630] usb usb3: usb auto-resume
[   34.687108] hub 3-0:1.0: hub_resume
[   34.687162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.687194] hub 3-0:1.0: hub_suspend
[   34.687208] usb usb3: bus auto-suspend, wakeup 1
[   34.739745] usb usb4: usb auto-resume
[   34.739766] hub 4-0:1.0: hub_resume
[   34.739811] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.739854] hub 4-0:1.0: hub_suspend
[   34.739862] usb usb4: bus auto-suspend, wakeup 1
[   34.739912] usb usb4: usb auto-resume
[   34.751096] hub 4-0:1.0: hub_resume
[   34.751158] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.751210] hub 4-0:1.0: hub_suspend
[   34.751220] usb usb4: bus auto-suspend, wakeup 1
[   34.751277] usb usb3: usb auto-resume
[   34.751301] hub 3-0:1.0: hub_resume
[   34.751331] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.751381] hub 3-0:1.0: hub_suspend
[   34.751391] usb usb3: bus auto-suspend, wakeup 1
[   34.751493] usb usb3: usb auto-resume
[   34.763138] hub 3-0:1.0: hub_resume
[   34.763196] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.763214] hub 3-0:1.0: hub_suspend
[   34.763220] usb usb3: bus auto-suspend, wakeup 1
[   35.402326] wlan0: authenticate with 00:04:0e:e4:00:3d
[   35.406817] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   35.408615] wlan0: authenticated
[   35.408795] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   35.408800] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   35.410566] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   35.414184] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   35.418960] wlan0: associated
[   35.419145] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.761681] usb 1-1.4: usb auto-suspend, wakeup 0
[   41.999888] usb 2-1.5: unlink qh1-0e01/ffff8800913935c0 start 0 [1/2 us]
[   42.207889] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020
[   42.208174] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s
[   42.208187] usb 2-1.5: USB disconnect, device number 3
[   42.208193] usb 2-1.5: unregistering device
[   42.208199] usb 2-1.5: unregistering interface 2-1.5:1.0
[   42.211644] usb 2-1.5: unregistering interface 2-1.5:1.1
[   42.211967] usb 2-1.5: usb_disable_device nuking all URBs
[   42.337872] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
[   42.337906] hub 2-1:1.0: hub_suspend
[   42.337920] usb 2-1: unlink qh256-0001/ffff88011871d3c0 start 1 [1/0 us]
[   42.340200] usb 2-1: usb auto-suspend, wakeup 1
[   42.353654] hub 2-0:1.0: hub_suspend
[   42.353666] usb usb2: bus auto-suspend, wakeup 1
[   42.353671] ehci-pci 0000:00:1d.0: suspend root hub
[   76.197049] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[   76.211468] cfg80211: Calling CRDA to update world regulatory domain
[   76.226235] cfg80211: World regulatory domain updated:
[   76.226244] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   76.226249] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   76.226253] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   76.226257] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   76.226260] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   76.226264] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   79.100802] PM: Syncing filesystems ... done.
[   79.103689] PM: Preparing system for mem sleep
[   79.104058] Freezing user space processes ... (elapsed 0.01 seconds) done.
[   79.119745] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   79.135615] PM: Entering mem sleep
[   79.135696] Suspending console(s) (use no_console_suspend to debug)
[   79.136149] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   79.136173] usb 1-1.2: unlink qh8-0e01/ffff88008eeee4c0 start 3 [1/2 us]
[   79.136175] usb usb2: usb auto-resume
[   79.136180] ehci-pci 0000:00:1d.0: resume root hub
[   79.136194] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   79.136195] hub 2-0:1.0: hub_resume
[   79.136205] hub 2-0:1.0: port 1: status 0507 change 0000
[   79.136220] usb 2-1: usb auto-resume
[   79.138378] usb 1-1.2: usb suspend, wakeup 0
[   79.138508] hub 1-1:1.0: hub_suspend
[   79.138512] usb 1-1: unlink qh256-0001/ffff88011871d4c0 start 1 [1/0 us]
[   79.138852] sd 1:0:0:0: [sdb] Stopping disk
[   79.140706] usb 1-1: usb suspend, wakeup 0
[   79.148190] usb usb3: usb auto-resume
[   79.148192] usb usb4: usb auto-resume
[   79.148213] hub 3-0:1.0: hub_resume
[   79.148225] hub 4-0:1.0: hub_resume
[   79.148238] hub 3-0:1.0: hub_suspend
[   79.148239] hub 4-0:1.0: hub_suspend
[   79.148244] usb usb3: bus suspend, wakeup 0
[   79.148245] usb usb4: bus suspend, wakeup 0
[   79.148283] hub 1-0:1.0: hub_suspend
[   79.148288] usb usb1: bus suspend, wakeup 0
[   79.148290] ehci-pci 0000:00:1a.0: suspend root hub
[   79.149353] mei_me 0000:00:16.0: suspend
[   79.167603] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   79.183577] usb 2-1: finish resume
[   79.184043] hub 2-1:1.0: hub_resume
[   79.184917] ehci-pci 0000:00:1d.0: reused qh ffff88011871d3c0 schedule
[   79.184926] usb 2-1: link qh256-0001/ffff88011871d3c0 start 1 [1/0 us]
[   79.184938] hub 2-1:1.0: hub_suspend
[   79.184946] usb 2-1: unlink qh256-0001/ffff88011871d3c0 start 1 [1/0 us]
[   79.187108] usb 2-1: usb suspend, wakeup 0
[   79.187234] hub 2-0:1.0: hub_suspend
[   79.187240] usb usb2: bus suspend, wakeup 0
[   79.187241] ehci-pci 0000:00:1d.0: suspend root hub
[   79.210391] sd 0:0:0:0: [sda] Stopping disk
[   79.838806] PM: suspend of devices complete after 703.658 msecs
[   79.839054] PM: late suspend of devices complete after 0.245 msecs
[   79.839309] xhci_hcd 0000:03:00.0: wakeup: 1
[   79.854661] xhci_hcd 0000:03:00.0: --> PCI D3hot
[   79.854750] r8169 0000:02:00.0: System wakeup enabled by ACPI
[   79.886687] ehci-pci 0000:00:1d.0: wakeup: 1
[   79.902563] ehci-pci 0000:00:1d.0: --> PCI D3hot
[   79.902745] ehci-pci 0000:00:1a.0: wakeup: 1
[   79.918543] ehci-pci 0000:00:1a.0: --> PCI D3hot
[   79.934580] PM: noirq suspend of devices complete after 95.639 msecs
[   79.934845] ACPI: Preparing to enter system sleep state S3
[   79.935810] PM: Saving platform NVS memory
[   79.937576] Disabling non-boot CPUs ...
[   79.937994] Broke affinity for irq 48
[   79.939029] smpboot: CPU 1 is now offline
[   80.042406] smpboot: CPU 2 is now offline
[   80.043450] Broke affinity for irq 9
[   80.043469] Broke affinity for irq 16
[   80.146283] smpboot: CPU 3 is now offline
[   80.148216] ACPI: Low-level resume complete
[   80.148270] PM: Restoring platform NVS memory
[   80.149562] Enabling non-boot CPUs ...
[   80.150639] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   80.161656] Disabled fast string operations
[   80.164072] Intel pstate controlling: cpu 1
[   80.164170] CPU1 is up
[   80.165241] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   80.176277] Disabled fast string operations
[   80.178700] Intel pstate controlling: cpu 2
[   80.178793] CPU2 is up
[   80.179854] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   80.190889] Disabled fast string operations
[   80.193408] Intel pstate controlling: cpu 3
[   80.193500] CPU3 is up
[   80.198453] ACPI: Waking up from system sleep state S3
[   80.344867] PM: noirq resume of devices complete after 142.919 msecs
[   80.345109] PM: early resume of devices complete after 0.203 msecs
[   80.345154] i915 0000:00:02.0: setting latency timer to 64
[   80.345185] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[   80.345298] ahci 0000:00:1f.2: setting latency timer to 64
[   80.345452] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[   80.345490] usb usb3: root hub lost power or was reset
[   80.345493] usb usb4: root hub lost power or was reset
[   80.345582] ehci-pci 0000:00:1a.0: setting latency timer to 64
[   80.346335] usb usb1: usb resume
[   80.346340] ehci-pci 0000:00:1a.0: resume root hub
[   80.350046] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[   80.350055] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[   80.350062] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[   80.350070] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[   80.350077] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[   80.350148] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   80.350408] r8169 0000:02:00.0: System wakeup disabled by ACPI
[   80.350531] ehci-pci 0000:00:1d.0: setting latency timer to 64
[   80.350542] usb usb4: usb resume
[   80.350556] usb usb3: usb resume
[   80.350587] hub 3-0:1.0: hub_reset_resume
[   80.350590] hub 3-0:1.0: trying to enable port power on non-switchable hub
[   80.350596] hub 4-0:1.0: hub_reset_resume
[   80.350621] usb usb2: usb resume
[   80.350624] ehci-pci 0000:00:1d.0: resume root hub
[   80.350642] hub 4-0:1.0: trying to enable port power on non-switchable hub
[   80.352408] [drm] Wrong MCH_SSKPD value: 0x16040307
[   80.352409] [drm] This can cause pipe underruns and display issues.
[   80.352410] [drm] Please upgrade your BIOS to fix this.
[   80.379625] hub 1-0:1.0: hub_resume
[   80.379659] hub 1-0:1.0: port 1: status 0503 change 0000
[   80.379689] usb 1-1: finish resume
[   80.379753] hub 1-1:1.0: hub_resume
[   80.380023] hub 1-1:1.0: port 2: status 0101 change 0001
[   80.380440] hub 1-1:1.0: port 4: status 0101 change 0001
[   80.383569] hub 2-0:1.0: hub_resume
[   80.383592] hub 2-0:1.0: port 1: status 0503 change 0000
[   80.383634] usb 2-1: finish resume
[   80.383745] hub 2-1:1.0: hub_resume
[   80.384362] hub 2-1:1.0: port 5: status 0101 change 0001
[   80.484485] ehci-pci 0000:00:1a.0: reused qh ffff88011871d4c0 schedule
[   80.484489] usb 1-1: link qh256-0001/ffff88011871d4c0 start 1 [1/0 us]
[   80.484730] usb 1-1.4: finish reset-resume
[   80.485017] usb 1-1.2: finish reset-resume
[   80.488402] ehci-pci 0000:00:1d.0: reused qh ffff88011871d3c0 schedule
[   80.488409] usb 2-1: link qh256-0001/ffff88011871d3c0 start 1 [1/0 us]
[   80.556392] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
[   80.664245] ata4: SATA link down (SStatus 0 SControl 300)
[   80.672205] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   80.676363] ata2.00: configured for UDMA/133
[   80.688262] ata5: SATA link down (SStatus 0 SControl 300)
[   80.692359] sd 1:0:0:0: [sdb] Starting disk
[   80.908038] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[   81.194525] usb 1-1.2: link qh8-0e01/ffff88008eeee4c0 start 4 [1/2 us]
[   81.727276] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   82.749831] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   82.752059] ata1.00: configured for UDMA/133
[   82.765793] sd 0:0:0:0: [sda] Starting disk
[   82.791378] PM: resume of devices complete after 2449.223 msecs
[   82.791755] PM: Finishing wakeup.
[   82.791818] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   82.791826] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   82.791831] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   82.791836] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0020
[   82.792429] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s
[   82.791757] Restarting tasks ... done.
[   82.794672] hub 4-0:1.0: hub_suspend
[   82.794681] usb usb4: bus auto-suspend, wakeup 1
[   82.794701] hub 3-0:1.0: hub_suspend
[   82.794706] usb usb3: bus auto-suspend, wakeup 1
[   82.799944] video LNXVIDEO:00: Restoring backlight state
[   82.917676] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
[   82.917693] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   82.917700] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0004
[   82.917722] hub 2-1:1.0: hub_suspend
[   82.917730] usb 2-1: unlink qh256-0001/ffff88011871d3c0 start 1 [1/0 us]
[   82.917796] hub 1-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s
[   82.917923] hub 1-1:1.0: port 4, status 0503, change 0000, 480 Mb/s
[   82.920081] usb 2-1: usb auto-suspend, wakeup 1
[   82.933446] hub 2-0:1.0: hub_suspend
[   82.933456] usb usb2: bus auto-suspend, wakeup 1
[   82.933467] ehci-pci 0000:00:1d.0: suspend root hub
[   82.957524] usb 1-1.4: usb auto-suspend, wakeup 0
[   83.205973] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   83.212618] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   83.430154] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   89.623641] wlan0: authenticate with 00:04:0e:e4:00:3d
[   89.626651] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   89.628602] wlan0: authenticated
[   89.628900] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   89.628906] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   89.629397] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   89.633132] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   89.639450] wlan0: associated
[   89.639524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Sedat Dilek (5):
kbuild: deb-pkg: Try to determine distribution
kbuild: deb-pkg: Bump year in debian/copyright file
kbuild: deb-pkg: Update git repository URL in debian/copyright file
Merge tag 'next-20130501' of git://git.kernel.org/.../next/linux-next into Linux-Next-v20130501 Merge branch 'deb-pkg-3.9-fixes' into 3.9.0-next20130501-1-iniza-small

 scripts/package/builddeb | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)
scripts/package/builddeb +16 -3
index acb8650..7d7c9d8 100644
@@ -172,9 +172,22 @@ else
 fi
 maintainer="$name <$email>"
 
+# Try to determine distribution
+if [ -e $(which lsb_release) ]; then
+       codename=$(lsb_release --codename --short)
+       if [ "$codename" != "" ]; then
+		distribution=$codename
+       else
+		distribution="UNRELEASED"
+		echo "WARNING: The distribution could NOT be determined!"
+       fi
+else
+       echo "HINT: Install lsb_release binary, this helps to identify your distribution!"
+fi
+
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
-linux-upstream ($packageversion) unstable; urgency=low
+linux-upstream ($packageversion) $distribution; urgency=low
 
   * Custom built Linux kernel.
 
@@ -188,10 +201,10 @@ This is a packacked upstream version of the Linux kernel.
 The sources may be found at most Linux ftp sites, including:
 ftp://ftp.kernel.org/pub/linux/kernel
 
-Copyright: 1991 - 2009 Linus Torvalds and others.
+Copyright: 1991 - 2013 Linus Torvalds and others.
 
 The git repository for mainline kernel development is at:
-git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
#2 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

In reply to Stephen Rothwell
Quoted 7 lines · Stephen Rothwell

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND
	select SND_AC97_CODEC

is unreliable (doesn't do what some people expect) when SND=m and SND_AC97_CODEC=m, since VIDEO_STK1160_AC97 is a bool.

Signature · 1 line
~Randy
#3 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

Quoted 28 lines · Randy Dunlap
Quoted 7 lines · Stephen Rothwell

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 8 lines

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND
	select SND_AC97_CODEC

is unreliable (doesn't do what some people expect) when SND=m and SND_AC97_CODEC=m, since VIDEO_STK1160_AC97 is a bool.

I'm not sure to understand what you want, here.
I find it valid that a 'bool' can 'select' a 'tristate', to force it to 'y'.

Do you mean there is an issue with Kconfig, the parser?
-> should Kconfig warn or error out in such a case?

Or do you mean the structure above is wrong, and should be ammended?
-> change the 'select' to a 'depends on'?
-> change the symbol to a tristate?

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#4 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

Quoted 35 lines · Yann E. MORIN
Quoted 34 lines · Randy Dunlap
Quoted 7 lines · Stephen Rothwell

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND
	select SND_AC97_CODEC
Quoted 4 lines
Quoted 2 lines

is unreliable (doesn't do what some people expect) when SND=m and SND_AC97_CODEC=m, since VIDEO_STK1160_AC97 is a bool.

I'm not sure to understand what you want, here.

I just want the build errors fixed. I'm not asking for any particular fix.

Quoted 1 line

I find it valid that a 'bool' can 'select' a 'tristate', to force it to 'y'.

But a bool selecting a tristate that already =m does not force it to y AFAICT. I guess that would be an acceptable change/fix. Maybe.

Quoted 1 line

Do you mean there is an issue with Kconfig, the parser?

I think so.

Quoted 4 lines

-> should Kconfig warn or error out in such a case?

Or do you mean the structure above is wrong, and should be ammended?
-> change the 'select' to a 'depends on'?

That should be one way to fix the problem, yes.

Quoted 1 line

-> change the symbol to a tristate?

I thought about that, but I don't think that it will work. There is no separate module that is built for AC97 codec support.

thanks,

Signature · 1 line
~Randy
#5 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

In reply to Yann E. MORIN
Quoted 18 lines · Yann E. MORIN
Quoted 18 lines

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 4 lines
Quoted 4 lines

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND

This doesn't depend on SND, it depends on SND=y.

#6 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

Quoted 20 lines · David Rientjes
Quoted 18 lines · Yann E. MORIN
Quoted 18 lines

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 7 lines
Quoted 4 lines
Quoted 4 lines

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND

This doesn't depend on SND, it depends on SND=y.
--

Maybe this option *should* depend on SND=y, but that's not what the kconfig syntax says. The kconfig language does not care if the variable is a bool or a tristate when evaluating a depends expression AFAICT (but I am only reading Documentation/kbuild/kconfig-language.txt, not the source code).

Signature · 1 line
~Randy
#7 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

Quoted 23 lines · Randy Dunlap
Quoted 23 lines
Quoted 22 lines
Quoted 22 lines

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND
Quoted 9 lines
Quoted 2 lines

This doesn't depend on SND, it depends on SND=y.
--

Maybe this option *should* depend on SND=y, but that's not what the kconfig syntax says. The kconfig language does not care if the variable is a bool or a tristate when evaluating a depends expression AFAICT (but I am only reading Documentation/kbuild/kconfig-language.txt, not the source code).

Doing "depends on SND=y" will only allow an option to be enabled if SND is builtin so the snd_card_* functions above will be defined (with your config we have a builtin function calling a module which may or may not be loaded). I think you've already addressed the snd_ac97_* functions, so the fix here should be relatively simple. Yann?

#8 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

In reply to Randy Dunlap

Randy, All,

Quoted 21 lines · Randy Dunlap
Quoted 20 lines · David Rientjes
Quoted 18 lines · Yann E. MORIN
Quoted 18 lines

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND

BTW, can you check that:
make silentoldconfig
does not warn about unmet dependencies for those symbols?

Quoted 4 lines
Quoted 1 line

This doesn't depend on SND, it depends on SND=y.

Maybe this option *should* depend on SND=y, but that's not what the kconfig syntax says.

I'd say Documentation/kbuild/kconfig-language.txt is not complete wrt the current syntax, grammar and semantics of the language. :-(

Quoted 3 lines

The kconfig language does not care if the variable is
a bool or a tristate when evaluating a depends expression AFAICT (but I am only reading Documentation/kbuild/kconfig-language.txt, not the source code).

Yes, it does, I've just tried with the following snippet:

config MODULES
bool "modules"

config A
tristate "A"

config B
tristate "B"
depends on A

config C
tristate "C"

config D
bool "D"
depends on C
select B

config E
bool "E"
depends on C=y
select B

As you can test, E will not be visible if C is not =y, while D will be visible if C is =m or =y.

Also, if A=m (and C=n), then B can only be =n or =m.

But with the test-case above, if C=y and ( D=y or E=y ), then B will be forced to =y, even though A might be unset, which means silentoldconfig would warn abount unmet dependencies:

    warning: (D && E) selects B which has unmet direct dependencies (A)

Worse! With: A=m, C=y, D=y -> B is forced to =y, which is wrong because it can only be =n or =m (see above), but silentoldconfig will not warn about this situation.

Sigh... :-(

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#9 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

Quoted 24 lines · Yann E. MORIN

Randy, All,

Quoted 21 lines · Randy Dunlap
Quoted 20 lines · David Rientjes
Quoted 18 lines · Yann E. MORIN
Quoted 18 lines

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND

BTW, can you check that:
make silentoldconfig
does not warn about unmet dependencies for those symbols?

'make silentoldconfig' on the config file that I am using only gives me this:

warning: (VIDEO_EM28XX) selects VIDEO_MT9V011 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT)

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

This doesn't depend on SND, it depends on SND=y.

Maybe this option *should* depend on SND=y, but that's not what the kconfig syntax says.

I'd say Documentation/kbuild/kconfig-language.txt is not complete wrt the current syntax, grammar and semantics of the language. :-(

OK, that's not surprising.

thanks,

Signature · 1 line
~Randy
#10 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

In reply to Randy Dunlap

Em 01-05-2013 14:59, Randy Dunlap escreveu:

Quoted 28 lines · Stephen Rothwell
Quoted 7 lines

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 8 lines

This kconfig fragment:
config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160 && SND
	select SND_AC97_CODEC

is unreliable (doesn't do what some people expect) when SND=m and SND_AC97_CODEC=m, since VIDEO_STK1160_AC97 is a bool.

Using select is always tricky.

I can see a few possible fixes for it:

1) split the alsa part into a separate module. IMHO, this is cleaner, but requires a little more work.

2) Use the Kconfig syntax:

	depends on SND || (SND=n)

on a tristate symbol. That behaves like:

if SND is 'n', it won't depend on SND;
if SND is 'm', the symbol will be 'm'
if SND is 'y', the symbol will be 'y'.

However, as as VIDEO_STK1160_AC97 is boolean, this will require an additional hidden Kconfig. Something like:

config VIDEO_STK1160_COMMON

	tristate "STK1160 USB video capture support"
	depends on VIDEO_DEV && I2C

config VIDEO_STK1160_AC97

	bool "STK1160 AC97 codec support"
	depends on VIDEO_STK1160_COMMON && SND

config VIDEO_STK1160

	tristate
	depends on ((SND || (SND=n) || !VIDEO_STK1160_AC97) && VIDEO_STK1160_COMMON
	default y
	select SND_AC97_CODEC if SND
	select VIDEOBUF2_VMALLOC
	select VIDEO_SAA711X
	select SND_AC97_CODEC

We do already something similar to the above for the mutual dependency of most media drivers for I2C and V4L2 and/or DVB core.

There's just one small drawback with the above: if SND='m', even if the user selects VIDEO_STK1160_COMMON='y', VIDEO_STK1160 will be 'm'.

A quick test here with make allyesconfig and then changing SND to m seemed to produce the right value for CONFIG_VIDEO_STK1160:

Selecting STK1160_AC97:

$ grep -e STK1160 -e SND= .config
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160_AC97=y
CONFIG_VIDEO_STK1160=m
CONFIG_SND=m

Unselecting STK1160_AC97:

$ grep -e STK1160 -e SND= .config
CONFIG_VIDEO_STK1160_COMMON=y
# CONFIG_VIDEO_STK1160_AC97 is not set
CONFIG_VIDEO_STK1160=y
CONFIG_SND=m

With a little more work, it could be possible to find a way to avoid the drawback of saying to the user that the module will be builtin, but compiling it as a module.

Regards,
Mauro.

-

[media] stk1160: Make stk1160 module if SND is m and audio support is selected

As reported by Randy:

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

drivers/media/usb/stk1160/Kconfig +10 -7
index 1c3a1ec..2bf6392 100644
@@ -1,8 +1,6 @@
-config VIDEO_STK1160
+config VIDEO_STK1160_COMMON
 	tristate "STK1160 USB video capture support"
 	depends on VIDEO_DEV && I2C
-	select VIDEOBUF2_VMALLOC
-	select VIDEO_SAA711X
 
 	---help---
 	  This is a video4linux driver for STK1160 based video capture devices.
@@ -12,9 +10,14 @@ config VIDEO_STK1160
 
 config VIDEO_STK1160_AC97
 	bool "STK1160 AC97 codec support"
-	depends on VIDEO_STK1160 && SND
-	select SND_AC97_CODEC
-
+	depends on VIDEO_STK1160_COMMON && SND
 	---help---
 	  Enables AC97 codec support for stk1160 driver.
-.
+
+config VIDEO_STK1160
+	tristate
+	depends on (!VIDEO_STK1160_AC97 || (SND='n') || SND) && VIDEO_STK1160_COMMON
+	default y
+	select VIDEOBUF2_VMALLOC
+	select VIDEO_SAA711X
+	select SND_AC97_CODEC if SND
Acked-by
#11 lore raw

Re: linux-next: Tree for May 1 (media/usb/stk1160)

Quoted 21 lines · Mauro Carvalho Chehab

[media] stk1160: Make stk1160 module if SND is m and audio support is selected

As reported by Randy:

When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y

drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to snd_card_create' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227b2): undefined reference to snd_ac97_bus' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x1227cd): undefined reference to snd_card_free' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x12281b): undefined reference to snd_ac97_mixer' drivers/built-in.o: In function stk1160_ac97_register':
(.text+0x122832): undefined reference to snd_card_register' drivers/built-in.o: In function stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'

Quoted 2 lines

Thanks.

Quoted 37 lines
drivers/media/usb/stk1160/Kconfig +10 -7
index 1c3a1ec..2bf6392 100644
@@ -1,8 +1,6 @@
-config VIDEO_STK1160
+config VIDEO_STK1160_COMMON
     tristate "STK1160 USB video capture support"
     depends on VIDEO_DEV && I2C
-    select VIDEOBUF2_VMALLOC
-    select VIDEO_SAA711X
 
     ---help---
       This is a video4linux driver for STK1160 based video capture devices.
@@ -12,9 +10,14 @@ config VIDEO_STK1160
 
 config VIDEO_STK1160_AC97
     bool "STK1160 AC97 codec support"
-    depends on VIDEO_STK1160 && SND
-    select SND_AC97_CODEC
-
+    depends on VIDEO_STK1160_COMMON && SND
     ---help---
       Enables AC97 codec support for stk1160 driver.
-.
+
+config VIDEO_STK1160
+    tristate
+    depends on (!VIDEO_STK1160_AC97 || (SND='n') || SND) && VIDEO_STK1160_COMMON
+    default y
+    select VIDEOBUF2_VMALLOC
+    select VIDEO_SAA711X
+    select SND_AC97_CODEC if SND
Signature · 1 line
-- 
Signature · 1 line
~Randy
#12 lore raw

Splitting stk1160-ac97 as a module (Re: linux-next: Tree for May 1 (media/usb/stk1160))

In reply to Mauro Carvalho Chehab

Hi Mauro,

Quoted 11 lines · Mauro Carvalho Chehab
Quoted 3 lines

is unreliable (doesn't do what some people expect) when SND=m and SND_AC97_CODEC=m, since VIDEO_STK1160_AC97 is a bool.

Using select is always tricky.

I can see a few possible fixes for it:

1) split the alsa part into a separate module. IMHO, this is cleaner, but requires a little more work.

I'm trying to split the ac97 support into a separate module. So far I've managed to do this with two different approaches, but both of them are broken in some way :-(

Couple questions:

1. Is it possible to force two symbols to be both built-in (=y) or both modules (=m)? This would make one of my solutions work.

2. Do you think it's possible to split this as a module *without* requesting the driver dynamically? I've tried the same extensions approach as in em28xx and others, but found some problems with the way snd-usb-audio driver registers.

Thanks,

Signature · 3 lines
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
#13 lore raw

Re: Splitting stk1160-ac97 as a module (Re: linux-next: Tree for May 1 (media/usb/stk1160))

Ezequiel, All,

Quoted 8 lines · Ezequiel Garcia

I'm trying to split the ac97 support into a separate module. So far I've managed to do this with two different approaches, but both of them are broken in some way :-(

Couple questions:

1. Is it possible to force two symbols to be both built-in (=y) or both modules (=m)? This would make one of my solutions work.

If they are always the same value, there is no need to have two symbols in the first place.

However, given the original problem from this thread, if what you meant was to have the second symbol either 'n' or the same as the first symbol, ie. the following table:

    A:  n   m   m   y   y
    B:  n   n   m   n   y

Then the closest I came up with is:

    config MODULES
        bool "Modules"
    
    config A
        tristate "A"
    
    config B_dummy
        bool "B"
        depends on A
    
    config B
        tristate
        default m if A=m && B_dummy
        default y if A=y && B_dummy

where B_dummy is not used outside of Kconfig, and only A and B are the symbols of interest (eg. to build the drivers).

Otherwise, I was not able to get the desired behviour with only the A and B symbols.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#14 lore raw

Re: Splitting stk1160-ac97 as a module (Re: linux-next: Tree for May 1 (media/usb/stk1160))

Quoted 39 lines · Yann E. MORIN

Ezequiel, All,

Quoted 8 lines · Ezequiel Garcia

I'm trying to split the ac97 support into a separate module. So far I've managed to do this with two different approaches, but both of them are broken in some way :-(

Couple questions:

1. Is it possible to force two symbols to be both built-in (=y) or both modules (=m)? This would make one of my solutions work.

If they are always the same value, there is no need to have two symbols in the first place.

However, given the original problem from this thread, if what you meant was to have the second symbol either 'n' or the same as the first symbol, ie. the following table:

    A:  n   m   m   y   y
    B:  n   n   m   n   y

Then the closest I came up with is:

    config MODULES
        bool "Modules"
    
    config A
        tristate "A"
    
    config B_dummy
        bool "B"
        depends on A
    
    config B
        tristate
        default m if A=m && B_dummy
        default y if A=y && B_dummy
Quoted 3 lines

where B_dummy is not used outside of Kconfig, and only A and B are the symbols of interest (eg. to build the drivers).

That worked like a charm!

Thanks a lot,

Signature · 3 lines
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
#15 lore raw

PATCH 1/1 hid: fix hid-steelseries kconfig/build

In reply to Stephen Rothwell

From: Randy Dunlap <[email protected]>

Fix hid-steelseries build by making it depends on LEDS_CLASS. Build errors happen when LEDS_CLASS=m and HID_STEELSERIES=y.

drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to led_classdev_unregister' drivers/built-in.o: In function steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister'

---
 drivers/hid/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/hid/Kconfig +1 -0
@@ -610,6 +610,7 @@ config HID_SPEEDLINK
 config HID_STEELSERIES
 	tristate "Steelseries SRW-S1 steering wheel support"
 	depends on HID
+	depends on LEDS_CLASS
 	---help---
 	Support for Steelseries SRW-S1 steering wheel
 
#16 lore raw

Re: [PATCH -next] hid: fix hid-steelseries kconfig/build

Hi Randy and all,
Seems like you found a problem... but the relevant sections of 'hid-steelseries.c' already have
--
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
...
#endif
--

Shouldn't this prevent the module having calls to register/unregister if the LED_CLASS is not enabled?

Does forcing a 'depends on LED_CLASS' in Kconfig prevent the hid-steelseries module being built on systems without LEDs, or is this simply a way to ensure that the LED_CLASS module gets loaded first?

Simon.

Quoted 36 lines

From: Randy Dunlap <[email protected]>

Fix hid-steelseries build by making it depends on LEDS_CLASS. Build errors happen when LEDS_CLASS=m and HID_STEELSERIES=y.

drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister'

---
 drivers/hid/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/hid/Kconfig +1 -1
@@ -610,6 +610,7 @@ config HID_SPEEDLINK
 config HID_STEELSERIES
 	tristate "Steelseries SRW-S1 steering wheel support"
 	depends on HID
+	depends on LEDS_CLASS
 	---help---
 	Support for Steelseries SRW-S1 steering wheel
 
--

To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#17 lore raw

Re: [PATCH -next] hid: fix hid-steelseries kconfig/build

Quoted 5 lines · On 05/01/13 12:27, [email protected] wrote:

Hi Randy and all,
Seems like you found a problem... but the relevant sections of 'hid-steelseries.c' already have
--
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)

which should be replaced with:

#include <linux/kconfig.h>

#if IS_ENABLED(LEDS_CLASS)

Quoted 6 lines

...
#endif
--

Shouldn't this prevent the module having calls to register/unregister if the LED_CLASS is not enabled?

Please read the patch description. CONFIG_LEDS_CLASS=m but CONFIG_HID_STEELSEREIS=y. A builtin driver cannot make calls to a modular driver if the modular driver is not loaded. Is there a way to require that the modular driver is loaded for hid-steelseries? Maybe so, but I don't know.

Quoted 3 lines

Does forcing a 'depends on LED_CLASS' in Kconfig prevent the hid-steelseries module being built on systems without LEDs, or is this simply a way to ensure that the LED_CLASS module gets loaded first?

It prevents the driver from being built. I think that a satisfactory solution would be this small change:

	depends on LEDS_CLASS || LEDS_CLASS=n

That makes HID_STEELSERIES depend on LEDS_CLASS when it is enabled but still allows the driver to build when LEDS_CLASS=n. Makes sense?

Oh, and please don't top-post.

Thanks.

Quoted 35 lines

Simon.

Quoted 32 lines

From: Randy Dunlap <[email protected]>

Fix hid-steelseries build by making it depends on LEDS_CLASS. Build errors happen when LEDS_CLASS=m and HID_STEELSERIES=y.

drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister'

---
 drivers/hid/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/hid/Kconfig +1 -1
@@ -610,6 +610,7 @@ config HID_SPEEDLINK
 config HID_STEELSERIES
 	tristate "Steelseries SRW-S1 steering wheel support"
 	depends on HID
+	depends on LEDS_CLASS
 	---help---
 	Support for Steelseries SRW-S1 steering wheel
 
--
Signature · 1 line
~Randy
#18 lore raw

Re: [PATCH -next] hid: fix hid-steelseries kconfig/build

Quoted 21 lines · On 05/01/13 12:27, [email protected] wrote:
Quoted 5 lines

Hi Randy and all,
Seems like you found a problem... but the relevant sections of 'hid-steelseries.c' already have
--
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)

which should be replaced with:

#include <linux/kconfig.h>

#if IS_ENABLED(LEDS_CLASS)

Quoted 6 lines

...
#endif
--

Shouldn't this prevent the module having calls to register/unregister if the LED_CLASS is not enabled?

Quoted 7 lines

Please read the patch description. CONFIG_LEDS_CLASS=m but CONFIG_HID_STEELSEREIS=y.
A builtin driver cannot make calls to a modular driver if the modular driver
is not loaded. Is there a way to require that the modular driver is loaded
for hid-steelseries? Maybe so, but I don't know.

I had a look around what other drivers do, but there is not much 'case law' to follow (or copy from).

'drivers/media/radio/radio-shark.c' does it like this:
--

#if defined(CONFIG_LEDS_CLASS) || \
    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK_MODULE))

...
#endif
--

Which I think is another solution, and perhaps a little more readable/understandable (ie. you have led control if LED_CLASS is built-in, or both the driver _and_ LED_CLASS are modules).

If there is not an objection to this style I'll prepare and test a patch in the next couple of days.

Simon.

PS. 'drivers/platform/x86/fujitsu-laptop.c' might have the same issues as hid-steelseries....

Quoted 66 lines
Quoted 5 lines

Does forcing a 'depends on LED_CLASS' in Kconfig prevent the hid-steelseries module being built on systems without LEDs, or is this simply a way to ensure that the LED_CLASS module gets loaded first?

It prevents the driver from being built. I think that a satisfactory solution
would be this small change:

	depends on LEDS_CLASS || LEDS_CLASS=n

That makes HID_STEELSERIES depend on LEDS_CLASS when it is enabled but still
allows the driver to build when LEDS_CLASS=n. Makes sense?

Oh, and please don't top-post.

Thanks.

Quoted 34 lines

Simon.

Quoted 31 lines

From: Randy Dunlap <[email protected]>

Fix hid-steelseries build by making it depends on LEDS_CLASS. Build errors happen when LEDS_CLASS=m and HID_STEELSERIES=y.

drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister'

---
 drivers/hid/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/hid/Kconfig +1 -0
@@ -610,6 +610,7 @@ config HID_SPEEDLINK
 config HID_STEELSERIES
 	tristate "Steelseries SRW-S1 steering wheel support"
 	depends on HID
+	depends on LEDS_CLASS
 	---help---
 	Support for Steelseries SRW-S1 steering wheel
 
Quoted 1 line
Quoted 1 line

--

--
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#19 lore raw

PATCH 1/1 HID: hid-steelseries fix led class build issue

In reply to Randy Dunlap

Fixes 'undefined reference' issue when hid-steelseries is built in, but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to led_classdev_unregister' drivers/built-in.o: In function steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister' --

Patch allows LED control when led-class is built in, or both hid-steelseries _and_ led-class are both modules.

---
 drivers/hid/hid-steelseries.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/hid/hid-steelseries.c +6 -3
index 2ed995c..dbd5e2e 100644
@@ -19,7 +19,8 @@
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 #define SRWS1_NUMBER_LEDS 15
 struct steelseries_srws1_data {
 	__u16 led_state;
@@ -108,7 +109,8 @@ static __u8 steelseries_srws1_rdesc_fixed[] = {
 0xC0                /*  End Collection                      */
 };
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 static void steelseries_srws1_set_leds(struct hid_device *hdev, __u16 leds)
 {
 	struct list_head *report_list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
@@ -371,7 +373,8 @@ MODULE_DEVICE_TABLE(hid, steelseries_srws1_devices);
 static struct hid_driver steelseries_srws1_driver = {
 	.name = "steelseries_srws1",
 	.id_table = steelseries_srws1_devices,
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 	.probe = steelseries_srws1_probe,
 	.remove = steelseries_srws1_remove,
 #endif
Signature · 1 line
1.8.1.2
Acked-by on v1 1/1
#20 lore raw

Re: [PATCH] HID: hid-steelseries fix led class build issue

Quoted 11 lines · Simon Wood

Fixes 'undefined reference' issue when hid-steelseries is built in, but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to led_classdev_unregister' drivers/built-in.o: In function steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister' --

Quoted 2 lines

Patch allows LED control when led-class is built in, or both hid-steelseries _and_ led-class are both modules.

OK, that builds. Thanks.

Missing lines: your Signed-off-by:
and

Quoted 39 lines
---
 drivers/hid/hid-steelseries.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/hid/hid-steelseries.c +6 -3
index 2ed995c..dbd5e2e 100644
@@ -19,7 +19,8 @@
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 #define SRWS1_NUMBER_LEDS 15
 struct steelseries_srws1_data {
 	__u16 led_state;
@@ -108,7 +109,8 @@ static __u8 steelseries_srws1_rdesc_fixed[] = {
 0xC0                /*  End Collection                      */
 };
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 static void steelseries_srws1_set_leds(struct hid_device *hdev, __u16 leds)
 {
 	struct list_head *report_list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
@@ -371,7 +373,8 @@ MODULE_DEVICE_TABLE(hid, steelseries_srws1_devices);
 static struct hid_driver steelseries_srws1_driver = {
 	.name = "steelseries_srws1",
 	.id_table = steelseries_srws1_devices,
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 	.probe = steelseries_srws1_probe,
 	.remove = steelseries_srws1_remove,
 #endif
Signature · 1 line
~Randy
#21 lore raw

Re: [PATCH] HID: hid-steelseries fix led class build issue

Quoted 12 lines · Randy Dunlap
Quoted 12 lines
---
 drivers/hid/hid-steelseries.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/hid/hid-steelseries.c +0 -0
index 2ed995c..dbd5e2e 100644
@@ -19,7 +19,8 @@
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 
Quoted 6 lines

drivers/hid/hid-steelseries.c line 26

Quoted 6 lines
drivers/hid/hid-steelseries.c +2 -1
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 #define SRWS1_NUMBER_LEDS 15
 struct steelseries_srws1_data {
 	__u16 led_state;

While we're working on getting a signed-off-by line, the clean way of handling this is

#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
#22 lore raw

PATCH v2 1/1 HID: hid-steelseries fix led class build issue

Fixes 'undefined reference' issue when hid-steelseries is built in, but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to led_classdev_unregister' drivers/built-in.o: In function steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister' --

Patch allows LED control when led-class is built in, or both hid-steelseries _and_ led-class are both modules.

---
 drivers/hid/hid-steelseries.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/hid/hid-steelseries.c +6 -3
index 2ed995c..c7a7563 100644
@@ -19,7 +19,8 @@
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
 #define SRWS1_NUMBER_LEDS 15
 struct steelseries_srws1_data {
 	__u16 led_state;
@@ -108,7 +109,8 @@ static __u8 steelseries_srws1_rdesc_fixed[] = {
 0xC0                /*  End Collection                      */
 };
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
 static void steelseries_srws1_set_leds(struct hid_device *hdev, __u16 leds)
 {
 	struct list_head *report_list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
@@ -371,7 +373,8 @@ MODULE_DEVICE_TABLE(hid, steelseries_srws1_devices);
 static struct hid_driver steelseries_srws1_driver = {
 	.name = "steelseries_srws1",
 	.id_table = steelseries_srws1_devices,
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
 	.probe = steelseries_srws1_probe,
 	.remove = steelseries_srws1_remove,
 #endif
Signature · 1 line
1.8.1.2
Applied
#23 lore raw

Re: [PATCH-V2] HID: hid-steelseries fix led class build issue

Quoted 11 lines · Simon Wood

Fixes 'undefined reference' issue when hid-steelseries is built in, but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to led_classdev_unregister' drivers/built-in.o: In function steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister' --

Quoted 5 lines

Patch allows LED control when led-class is built in, or both hid-steelseries _and_ led-class are both modules.

Applied, thanks.

Signature · 2 lines
Jiri Kosina
SUSE Labs
#24 lore raw

PATCH 1/1 HID: hid-steelseries fix led class build issue

In reply to Randy Dunlap

Fixes 'undefined reference' issue when hid-steelseries is built in, but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to led_classdev_unregister' drivers/built-in.o: In function steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9ce5): undefined reference to led_classdev_register' hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister' --

Patch allows LED control when led-class is built in, or both hid-steelseries _and_ led-class are both modules.

---
 drivers/hid/hid-steelseries.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/hid/hid-steelseries.c +6 -3
index 2ed995c..dbd5e2e 100644
@@ -19,7 +19,8 @@
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 #define SRWS1_NUMBER_LEDS 15
 struct steelseries_srws1_data {
 	__u16 led_state;
@@ -108,7 +109,8 @@ static __u8 steelseries_srws1_rdesc_fixed[] = {
 0xC0                /*  End Collection                      */
 };
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 static void steelseries_srws1_set_leds(struct hid_device *hdev, __u16 leds)
 {
 	struct list_head *report_list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
@@ -371,7 +373,8 @@ MODULE_DEVICE_TABLE(hid, steelseries_srws1_devices);
 static struct hid_driver steelseries_srws1_driver = {
 	.name = "steelseries_srws1",
 	.id_table = steelseries_srws1_devices,
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_HID_STEELSERIES_MODULE))
 	.probe = steelseries_srws1_probe,
 	.remove = steelseries_srws1_remove,
 #endif
Signature · 1 line
1.8.1.2
#25 lore raw

PATCH 1/1 power: fix lp8788-charger kconfig & build

In reply to Stephen Rothwell

From: Randy Dunlap <[email protected]>

Fix build errors in lp8788-charger by making it depend on IIO. Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y.

lp8788-charger.c:(.text+0x2146b5): undefined reference to iio_channel_get' lp8788-charger.c:(.text+0x2146ce): undefined reference to iio_channel_get' lp8788-charger.c:(.text+0x214a86): undefined reference to iio_read_channel_processed' lp8788-charger.c:(.text+0x214b51): undefined reference to iio_read_channel_processed' lp8788-charger.c:(.text+0x214c30): undefined reference to iio_read_channel_processed' lp8788-charger.c:(.text+0x214d93): undefined reference to iio_channel_release' lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release'

Cc "Milo(Woogyom) Kim" <[email protected]>
---
 drivers/power/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/power/Kconfig +1 -0
@@ -284,6 +284,7 @@ config CHARGER_LP8788
 	tristate "TI LP8788 charger driver"
 	depends on MFD_LP8788
 	depends on LP8788_ADC
+	depends on IIO
 	help
 	  Say Y to enable support for the LP8788 linear charger.
 
Acked-by on v1 1/1
#26 lore raw

RE: [PATCH -next] power: fix lp8788-charger kconfig & build

Quoted 13 lines

-----Original Message-----
From: Randy Dunlap [mailto:[email protected]]
Sent: Thursday, May 02, 2013 4:19 AM
To: Stephen Rothwell
Cc: [email protected]; [email protected]; Kim, Milo; Anton Vorontsov; David Woodhouse
Subject: [PATCH -next] power: fix lp8788-charger kconfig & build

From: Randy Dunlap <[email protected]>

Fix build errors in lp8788-charger by making it depend on IIO. Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y.

Quoted 14 lines

lp8788-charger.c:(.text+0x2146b5): undefined reference to iio_channel_get' lp8788-charger.c:(.text+0x2146ce): undefined reference to iio_channel_get' lp8788-charger.c:(.text+0x214a86): undefined reference to iio_read_channel_processed' lp8788-charger.c:(.text+0x214b51): undefined reference to iio_read_channel_processed' lp8788-charger.c:(.text+0x214c30): undefined reference to iio_read_channel_processed' lp8788-charger.c:(.text+0x214d93): undefined reference to iio_channel_release' lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release'

Thanks for fixing this.

#28 lore raw

PATCH 1/1 staging: sep: fix driver build and kconfig

In reply to Stephen Rothwell

From: Randy Dunlap <[email protected]>

Fix build errors in staging/sep/ by making DX_SEP depend on CRYPTO.

drivers/built-in.o: In function `sep_sha1_init':
sep_crypto.c:(.text+0x245ece): undefined reference to crypto_enqueue_request' drivers/built-in.o: In function sep_sha1_update':
sep_crypto.c:(.text+0x245f4f): undefined reference to crypto_enqueue_request' drivers/built-in.o: In function sep_sha1_final':
sep_crypto.c:(.text+0x245fcf): undefined reference to crypto_enqueue_request' drivers/built-in.o: In function sep_sha1_finup':
sep_crypto.c:(.text+0x24604f): undefined reference to crypto_enqueue_request' drivers/built-in.o: In function sep_sha1_digest':
sep_crypto.c:(.text+0x2460de): undefined reference to crypto_enqueue_request' drivers/built-in.o:sep_crypto.c:(.text+0x24616e): more undefined references to crypto_enqueue_request' follow drivers/built-in.o: In function `sep_crypto_block':
sep_crypto.c:(.text+0x247c81): undefined reference to ablkcipher_walk_phys' sep_crypto.c:(.text+0x247e40): undefined reference to ablkcipher_walk_phys' drivers/built-in.o: In function `sep_dequeuer':
sep_crypto.c:(.text+0x248ab9): undefined reference to crypto_dequeue_request' sep_crypto.c:(.text+0x248afa): undefined reference to crypto_ahash_type' sep_crypto.c:(.text+0x248fdf): undefined reference to crypto_dequeue_request' drivers/built-in.o: In function sep_crypto_setup':
(.text+0x24902a): undefined reference to `crypto_init_queue'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x24909c): undefined reference to `crypto_register_ahash'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x2490c4): undefined reference to `crypto_register_alg'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x2490f7): undefined reference to `crypto_unregister_alg'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x249118): undefined reference to `crypto_unregister_ahash'
drivers/built-in.o: In function `sep_crypto_takedown':
(.text+0x249176): undefined reference to `crypto_unregister_ahash'
drivers/built-in.o: In function `sep_crypto_takedown':
(.text+0x249197): undefined reference to `crypto_unregister_alg'

---
 drivers/staging/sep/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/sep/Kconfig +1 -1
@@ -1,6 +1,6 @@
 config DX_SEP
 	tristate "Discretix SEP driver"
-	depends on PCI
+	depends on PCI && CRYPTO
 	help
 	  Discretix SEP driver; used for the security processor subsystem
 	  on board the Intel Mobile Internet Device and adds SEP availability
#29 lore raw
In reply to Stephen Rothwell
Quoted 16 lines · Stephen Rothwell

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

The nfsd tree lost its build failure.

The xfs tree lost its build failure.

The vfs tree gained conflicts against Linus' and the powerpc trees and gained a build failure for which I applied a merge fix patch.

The drm-intel tree gained a conflict against the drm tree.

Quoted 7 lines

The block tree gained a conflict against Linus' tree.

The arm-soc tree gained a conflict against the arm tree.

The akpm tree lost a lot of patches that turned up elsewhere.

----------------------------------------------------------------------------

randconf build failure:

make -C drivers/scsi/aic7xxx/aicasm
*** Install db development libraries
gcc -I/usr/include -I. aicasm.c aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c -o aicasm -ldb aicasm_symbol.c:48:19: fatal error: aicdb.h: No such file or directory compilation terminated.

random config file attached.

Quoted 31 lines

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).

You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc, sparc64 and arm defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.

Below is a summary of the state of the merge.

We are up to 224 trees (counting Linus' and 31 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.

Quoted 610 lines

Thanks to Randy Dunlap for doing many randconfig builds. And to Paul Gortmaker for triage and bug fixes.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.

Signature · 602 lines
Cheers,
Stephen Rothwell                    [email protected]

$ git checkout master
$ git reset --hard stable
Merging origin/master (3094566 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial)
Merging fixes/master (96d8683 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client)
Merging kbuild-current/rc-fixes (a54292f kbuild: generate generic headers before recursing into scripts)
Merging arc-current/for-curr (561daec ARC: [mm] Lazy D-cache flush (non aliasing VIPT))
Merging arm-current/fixes (1783d45 ARM: 7700/2: Make cpu_init() notrace)
Merging m68k-current/for-linus (e00c73e m68k: Remove inline strlen() implementation)
Merging powerpc-merge/merge (5676005 powerpc/pseries/lparcfg: Fix possible overflow are more than 1026)
Merging sparc/master (0fbd067 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc)
Merging net/master (79f632c unix/stream: fix peeking with an offset larger than data in queue)
Merging ipsec/master (da241ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net)
Merging sound-current/for-linus (c5a4698 Merge tag 'asoc-maintainers-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus)
Merging pci-current/for-linus (d46fc8b x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0)
Merging wireless/master (a8a48e6 Merge tag 'nfc-next-3.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next)
Merging driver-core.current/driver-core-linus (c1be5a5 Linux 3.9)
Merging tty.current/tty-linus (c1be5a5 Linux 3.9)
Merging usb.current/usb-linus (c1be5a5 Linux 3.9)
Merging staging.current/staging-linus (c1be5a5 Linux 3.9)
Merging char-misc.current/char-misc-linus (c1be5a5 Linux 3.9)
Merging input-current/for-linus (5846115 Input: wacom - fix "can not retrieve extra class descriptor" for DTH2242)
Merging md-current/for-linus (32f9f57 MD: ignore discard request for hard disks of hybid raid1/raid10 array)
Merging audit-current/for-linus (c158a35 audit: no leading space in audit_log_d_path prefix)
Merging crypto-current/master (72a763d crypto: algif - suppress sending source address information in recvmsg)
Merging ide/master (bf6b438 ide: gayle: use module_platform_driver_probe())
Merging dwmw2/master (5950f08 pcmcia: remove RPX board stuff)
Merging sh-current/sh-fixes-for-linus (4403310 SH: Convert out[bwl] macros to inline functions)
Merging irqdomain-current/irqdomain/merge (a0d271c Linux 3.6)
Merging devicetree-current/devicetree/merge (ab28698 of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS)
Merging spi-current/spi/merge (0d2d0cc spi/davinci: fix module build error)
Merging gpio-current/gpio/merge (e97f9b5 gpio/gpio-ich: fix ichx_gpio_check_available() return what callers expect)
Merging rr-fixes/fixes (c1be5a5 Linux 3.9)
Merging mfd-fixes/master (31880c3 Linux 3.9-rc6)
Merging vfio-fixes/for-linus (904c680 vfio-pci: Fix possible integer overflow)
Merging asm-generic/master (fb9de7e xtensa: Use generic asm/mmu.h for nommu)
Merging arc/for-next (07961ac Linux 3.9-rc5)
Merging arm/for-next (4b6cce6 Merge branches 'devel-stable', 'entry', 'fixes', 'mach-types', 'misc' and 'smp-hotplug' into for-next)
CONFLICT (content): Merge conflict in arch/arm/kvm/arm.c
Merging arm-perf/for-next/perf (ab87304 Merge branches 'perf/fixes' and 'hw-breakpoint' into for-next/perf)
Merging davinci/davinci-next (fe0d422 Linux 3.0-rc6)
Merging xilinx/arm-next (64e3fd3 arm: zynq: Add support for pmu)
CONFLICT (content): Merge conflict in drivers/clocksource/Makefile
Merging arm64/upstream (16c85a1 arm64: Use acquire/release semantics instead of explicit DMB)
Merging blackfin/for-linus (f656c24 blackfin: time-ts: Remove duplicate assignment)
Merging c6x/for-linux-next (f934af0 add memory barrier to arch_local_irq_restore)
Merging cris/for-next (32ade6a CRIS: Add kvm_para.h which includes generic file)
Merging hexagon/linux-next (e0e34de Hexagon: add v4 CS regs to core copyout macro)
Merging ia64/next (797f6a6 Add size restriction to the kdump documentation)
Merging m68k/for-next (e00c73e m68k: Remove inline strlen() implementation)
Merging m68knommu/for-next (2842e5b0 m68knommu: enable Timer on coldfire 532x)
Merging metag/for-next (164c013 metag: defconfigs: increase log buffer 8KiB => 128KiB)
Merging microblaze/next (01cc2cb microblaze: intc: set the default irq_domain)
Merging mips/mips-for-linux-next (6eac6e6 Merge branches 'next/3.9-fixes', 'next/kvm' and 'next/micromips' into mips-for-linux-next)
Merging openrisc/for-upstream (6af6095 openrisc: remove HAVE_VIRT_TO_BUS)
Merging parisc/for-next (6c700d7 [PARISC] hpux: Remove obsolete regs parameter from do_execve() in hpux_execve())
Merging powerpc/next (1f6aaac powerpc: Update tlbie/tlbiel as per ISA doc)
CONFLICT (content): Merge conflict in arch/powerpc/mm/numa.c
CONFLICT (content): Merge conflict in arch/metag/mm/Kconfig
Merging 4xx/next (2074b1d powerpc: Fix irq distribution)
Merging mpc5xxx/next (fdeaf0e powerpc/512x: add ifm ac14xx board)
Merging galak/next (9e2ecdb powerpc/fsl-booke: add the reg prop for pci bridge device node for T4/B4)
Merging s390/features (1c21351 s390/pci: use pci_scan_root_bus)
Merging sh/sh-latest (37284bd Merge branches 'sh/hw-breakpoints' and 'sh/serial-of' into sh-latest)
Merging sparc-next/master (07df841 sparc64: Do not save/restore interrupts in get_new_mmu_context())
Merging tile/master (9fc1894 arch/tile: Fix syscall return value passed to tracepoint)
Merging unicore32/unicore32 (c284464 arch/unicore32: remove CONFIG_EXPERIMENTAL)
Merging xtensa/for_next (4e34bf6 xtensa: provide default platform_pcibios_init implementation)
Merging btrfs/next (6aec51f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into for-linus-3.9)
Merging ceph/testing (1de1777 rbd: refactor rbd_dev_probe_update_spec())
CONFLICT (content): Merge conflict in net/ceph/osdmap.c
CONFLICT (content): Merge conflict in fs/ceph/addr.c
CONFLICT (content): Merge conflict in drivers/block/rbd.c
Merging cifs/for-next (bf81710 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending)
Merging configfs/linux-next (b930c26 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs)
Merging ecryptfs/next (f6161aa Linux 3.9-rc2)
Merging ext3/for_next (e162b2f jbd: use kmem_cache_zalloc instead of kmem_cache_alloc/memset)
Merging ext4/dev (0d606e2 ext4: fix type-widening bug in inode table readahead code)
Merging f2fs/dev (d23bfc6 f2fs: avoid deadlock during evict after f2fs_gc)
Merging fuse/for-next (efb9fa9 fuse: truncate file if async dio failed)
Merging gfs2/master (222cb53 GFS2: Flush work queue before clearing glock hash tables)
Merging jfs/jfs-next (9d48017 jfs: avoid undefined behavior from left-shifting by 32 bits)
Merging logfs/master (3394661 Fix the call to BUG() caused by no free segment found)
Merging nfs/linux-next (8dbec78 NFSv4.x: Fix handling of partially delegated locks)
Merging nfsd/nfsd-next (d28fcc8 svcrpc: fix gss-proxy to respect user namespaces)
Merging ocfs2/linux-next (4538df6 ocfs2: Don't spam on -EDQUOT.)
Merging omfs/for-next (976d167 Linux 3.1-rc9)
Merging squashfs/master (4b0180a Squashfs: add mount time sanity check for block_size and block_log match)
Merging v9fs/for-next (b6f4bee fs/9p: Fix atomic_open)
Merging ubifs/linux-next (c1be5a5 Linux 3.9)
Merging xfs/for-next (123887e xfs: Teach dquot recovery about CONFIG_XFS_QUOTA)
CONFLICT (content): Merge conflict in fs/xfs/xfs_iomap.c
Merging vfs/for-next (3c3a685 minimal !CONFIG_PROC_FS fixes)
CONFLICT (content): Merge conflict in fs/proc/internal.h
CONFLICT (content): Merge conflict in drivers/staging/vt6655/device_main.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_specproc.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_ports_ops.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_net_ops.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_mon_ops.c
CONFLICT (content): Merge conflict in drivers/staging/dgrp/dgrp_dpa_ops.c
CONFLICT (modify/delete): drivers/staging/ccg/rndis.c deleted in HEAD and modified in vfs/for-next. Version vfs/for-next of drivers/staging/ccg/rndis.c left in tree.
CONFLICT (modify/delete): drivers/staging/ccg/f_fs.c deleted in HEAD and modified in vfs/for-next. Version vfs/for-next of drivers/staging/ccg/f_fs.c left in tree.
CONFLICT (content): Merge conflict in drivers/firmware/efivars.c
CONFLICT (content): Merge conflict in arch/powerpc/kernel/rtas_flash.c
$ git rm -f drivers/staging/ccg/f_fs.c drivers/staging/ccg/rndis.c
Applying: fs: fix up for changes to proc_fs include files
Applying: SUNRPC: update for PDE removal
Merging pci/next (d4f09c5 Merge branch 'pci/gavin-msi-cleanup' into next)
Merging hid/for-next (46b1897 Merge branch 'for-3.10/hid-debug' into for-next)
Merging i2c/i2c/for-next (c39e8e4 i2c: xiic: must always write 16-bit words to TX_FIFO)
CONFLICT (content): Merge conflict in drivers/staging/media/go7007/go7007-driver.c
CONFLICT (content): Merge conflict in drivers/media/pci/bt8xx/bttv-input.c
Applying: i2c: fixup for code movement from bttv_input.c
Merging jdelvare-hwmon/master (c662b7a hwmon: (lm75) Add support for the Dallas/Maxim DS7505)
Merging hwmon-staging/hwmon-next (6445e66 hwmon: (nct6775) Fix coding style problems)
Merging v4l-dvb/master (1d62caa Merge /home/v4l/v4l/patchwork)
Merging kbuild/for-next (1567364 Merge branch 'kbuild/kconfig' into kbuild/for-next)
Merging kconfig/for-next (4eae518 localmodconfig: Fix localyesconfig to set to 'y' not 'm')
Merging libata/NEXT (2cc1144 sata_highbank: Rename proc_name to the module name)
Merging infiniband/for-next (f1258ea Merge branches 'misc' and 'mlx4' into for-next)
Merging pstore/master (bd08ec3 pstore/ram: Restore ecc information block)
Merging pm/linux-next (371deb9 Merge branch 'pm-cpufreq')
CONFLICT (content): Merge conflict in include/linux/clockchips.h
CONFLICT (content): Merge conflict in drivers/acpi/scan.c
Merging idle/next (5c99726b Merge branch 'fspin' into next)
Merging apm/for-next (fb9d78a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm)
Merging cpuidle/cpuidle-next (817c876 Merge branch 'pm-fixes-next' into fixes-next)
CONFLICT (content): Merge conflict in drivers/base/power/qos.c
Merging cpupowerutils/master (f166033 cpupower tools: add install target to the debug tools' makefiles)
Merging thermal/next (de6558d Merge branch 'MAINTAINERS-update' of .git into next)
Merging ieee1394/for-next (6fe9efb firewire: ohci: dump_stack() for PHY regs read/write failures)
Merging ubi/linux-next (f6161aa Linux 3.9-rc2)
Merging dlm/next (9000831 dlm: avoid unnecessary posix unlock)
Merging swiotlb/linux-next (af51a9f swiotlb: Do not export swiotlb_bounce since there are no external consumers)
Merging scsi/for-next (73b22ec Merge branch 'misc' into for-next)
Merging target-updates/for-next (04b59ba tcm_vhost: Enable VIRTIO_SCSI_F_HOTPLUG)
Merging target-merge/for-next-merge (b8d26b3 iser-target: Add iSCSI Extensions for RDMA (iSER) target driver)
Merging ibft/linux-next (935a9fe ibft: Fix finding IBFT ACPI table on UEFI)
Merging isci/all (6734092 isci: add a couple __iomem annotations)
Merging slave-dma/next (0b03930 Merge branch 'for-linus' into next)
Merging dmaengine/next (41ef2d5 Linux 3.9-rc7)
Merging net-next/master (fe86d71 mlx4_en: fix a build error on 32bit arches)
CONFLICT (content): Merge conflict in tools/Makefile
CONFLICT (content): Merge conflict in include/linux/pci.h
CONFLICT (content): Merge conflict in drivers/infiniband/hw/cxgb4/qp.c
Applying: drivers:net: fix up for code movement from rt2x00pci.c
Merging ipsec-next/master (05600a7 xfrm_user: constify netlink dispatch table)
Merging wireless-next/master (a8a48e6 Merge tag 'nfc-next-3.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next)
Merging bluetooth/master (975aba3 Bluetooth: Fix multiple LE socket handling)
Merging mtd/master (cdb6404 mtd: omap2: Use module_platform_driver())
Merging l2-mtd/master (98927a2 mtd: get the ECC info from the parameter page for ONFI nand)
Merging crypto/master (3862de1 crypto: caam - fix job ring cleanup code)
Merging drm/drm-next (33896bf udl: bind the framebuffer to the correct device.)
Merging drm-intel/drm-intel-next-queued (dce3271 drm/i915: reference count for i915_hw_contexts)
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_reg.h
Merging sound/for-next (4ca231b ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch)
Merging sound-asoc/for-next (615973d Merge remote-tracking branch 'asoc/fix/wm8994' into asoc-linus)
Merging modules/modules-next (a53a11f3 modpost: fix unwanted VMLINUX_SYMBOL_STR expansion)
Merging virtio/virtio-next (c2ecd51 lguest: improve code readability in lg_cpu_start.)
CONFLICT (content): Merge conflict in drivers/char/virtio_console.c
CONFLICT (modify/delete): Documentation/virtual/virtio-spec.txt deleted in virtio/virtio-next and modified in HEAD. Version HEAD of Documentation/virtual/virtio-spec.txt left in tree.
$ git rm -f Documentation/virtual/virtio-spec.txt
Merging input/next (0c6a616 Input: trackpoint - Optimize trackpoint init to use power-on reset)
Merging input-mt/for-next (194664e Input: MT - handle semi-mt devices in core)
Merging cgroup/for-next (2a0010a cpuset: fix compile warning when CONFIG_SMP=n)
Merging block/for-next (b5bb021 Merge branch 'for-3.10/core' into for-next)
CONFLICT (content): Merge conflict in include/linux/blk_types.h
CONFLICT (content): Merge conflict in drivers/block/drbd/drbd_proc.c
Merging device-mapper/master (f8efabf This patch uses memalloc_noio_save to avoid a possible deadlock in dm-bufio.  (it could happen only with large block size, at most PAGE_SIZE << MAX_ORDER (typically 8MiB).)
Merging embedded/master (4744b43 embedded: fix vc_translate operator precedence)
Merging firmware/master (6e03a20 firmware: speed up request_firmware(), v3)
Merging pcmcia/master (80af9e6 pcmcia at91_cf: fix raw gpio number usage)
Merging mmc/mmc-next (e4404fa mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE)
Merging kgdb/kgdb-next (6bedf31 kdb: Remove unhandled ssb command)
Merging slab/for-next (7cccd80 slub: tid must be retrieved from the percpu area of the current processor)
Merging uclinux/for-next (6dbe51c Linux 3.9-rc1)
Merging md/for-next (1fef8be raid5: make release_stripe lockless)
Merging mfd/master (99f4c6b mfd: si476x: Don't use 0bNNN)
CONFLICT (content): Merge conflict in drivers/mfd/Kconfig
CONFLICT (content): Merge conflict in arch/arm/mach-ux500/cpuidle.c
Merging battery/master (6b17080 pm2301-charger: Fix suspend/resume)
Merging fbdev/fbdev-next (a49f0d1 Linux 3.8-rc1)
Merging viafb/viafb-next (838ac78 viafb: avoid refresh and mode lookup in set_par)
Merging omap_dss2/for-next (e72b753 fbdev/ps3fb: fix compile warning)
Merging regulator/for-next (bee5465 Merge remote-tracking branch 'regulator/topic/wm8994' into v3.9-rc8)
Merging security/next (b7ae9f0 Merge branch 'tpmdd-04-17-13' of git://github.com/shpedoikal/linux into my-next)
Merging selinux/master (c2d7b24 Merge tag 'v3.4' into 20120409)
Merging lblnet/master (7e27d6e Linux 2.6.35-rc3)
Merging watchdog/master (69c6612 watchdog: Fix race condition in registration code)
Merging dwmw2-iommu/master (6491d4d intel-iommu: Free old page tables before creating superpage)
Merging iommu/next (d4df35e2 Merge branches 'iommu/fixes', 'x86/vt-d', 'x86/amd', 'ppc/pamu' and 'core' into next)
Merging vfio/next (0b43c08 vfio: Use down_reads to protect iommu disconnects)
Merging osd/linux-next (861d666 exofs: don't leak io_state and pages on read error)
Merging jc_docs/docs-next (5c050fb docs: update the development process document)
Merging trivial/for-next (071361d mm: Convert print_symbol to %pSR)
Merging audit/for-next (dcd6c92 Linux 3.3-rc1)
Merging fsnotify/for-next (1ca39ab inotify: automatically restart syscalls)
Merging edac/linux_next (de4772c edac: sb_edac.c should not require prescence of IMC_DDRIO device)
Merging edac-amd/for-next (9713fae EDAC: Merge mci.mem_is_per_rank with mci.csbased)
Merging devicetree/devicetree/next (d347bc5 Merge branch 'robherring/for-next' from git://sources.calxeda.com/kernel/linux.git)
Merging dt-rh/for-next (a2b9ea7 Documentation/devicetree: make semantic of initrd-end more explicit)
Merging spi/spi/next (00ab539 spi/s3c64xx: let device core setup the default pin configuration)
Merging spi-mb/for-next (cd8d984 spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items)
Merging tip/auto-latest (979830a Merge branch 'x86/urgent')
CONFLICT (modify/delete): drivers/firmware/efivars.c deleted in tip/auto-latest and modified in HEAD. Version HEAD of drivers/firmware/efivars.c left in tree.
$ git rm -f drivers/firmware/efivars.c
Applying: efivars: Include missing linux/magic.h inclusions
Applying: efivars: use of kmalloc etc requires the inclusion of slab.h
Merging ftrace/for-next (4c69e6e tracepoints: Prevent null probe from being added)
Merging rcu/rcu/next (a9be854 Merge commit '6d87669357936bffa1e8fea7a4e7743e76905736' into next.2013.10.22a)
Merging cputime/cputime (c3e0ef9 [S390] fix cputime overflow in uptime_proc_show)
Merging uprobes/for-next (0326f5a uprobes/core: Handle breakpoint and singlestep exceptions)
Merging kvm/linux-next (4cee4b7 kvm: KVM_CAP_IOMMU only available with device assignment)
CONFLICT (content): Merge conflict in drivers/s390/kvm/virtio_ccw.c
CONFLICT (content): Merge conflict in arch/s390/mm/pgtable.c
Merging kvm-arm/kvm-arm-next (b8022d7 arm: kvm: arch_timer: use symbolic constants)
Merging kvm-ppc/kvm-ppc-next (8b78645 KVM: PPC: Book3S: Facilities to save/restore XICS presentation ctrler state)
Merging oprofile/for-next (23995bb oprofile, s390: Add support for IBM zEnterprise EC12)
Merging fw-nohz/nohz/next (74876a9 printk: Wake up klogd using irq_work)
Merging xen/upstream/xen (af3a3ab Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes)
Merging xen-two/linux-next (6461b07 Merge branch 'stable/for-linus-3.10' into linux-next)
Merging xen-arm/linux-next (9bc25a1 xen/arm: remove duplicated include from enlighten.c)
Merging percpu/for-next (a1b2a55 percpu: add documentation on this_cpu operations)
Merging workqueues/for-next (46aed11 Merge branch 'for-3.10' into for-next)
Merging drivers-x86/linux-next (e6e5224 ideapad-laptop: Depend on BACKLIGHT_CLASS_DEVICE instead of selecting it)
CONFLICT (content): Merge conflict in drivers/platform/x86/chromeos_laptop.c
Merging hwpoison/hwpoison (46e387b Merge branch 'hwpoison-hugepages' into hwpoison)
Merging sysctl/master (4e474a0 sysctl: protect poll() in entries that may go away)
Merging regmap/for-next (38a8179 Merge remote-tracking branch 'regmap/topic/range' into regmap-next)
Merging hsi/for-next (43139a6 HSI: hsi_char: Update ioctl-number.txt)
Merging leds/for-next (df92d5f leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS)
Merging driver-core/driver-core-next (0d1d392 Merge 3.9-rc7 into driver-core-next)
Merging tty/tty-next (45efcb2 tty/serial/sirf: fix MODULE_DEVICE_TABLE)
Merging usb/usb-next (4626b8d USB: ehci-msm: USB_MSM_OTG needs USB_PHY)
Merging usb-gadget/next (added5f ARM: mxs_defconfig: add CONFIG_USB_PHY)
Merging staging/staging-next (a0eeed4 staging: comedi: ni_labpc: fix legacy driver build)
Merging char-misc/char-misc-next (0e27263 Tools: hv: Fix a checkpatch warning)
Merging bcon/master (06c6942 blockconsole: Mark a local work struct static)
CONFLICT (content): Merge conflict in drivers/block/Kconfig
Merging tmem/linux-next (8f0d816 Linux 3.7-rc3)
Merging writeback/writeback-for-next (ed84825 Negative (setpoint-dirty) in bdi_position_ratio())
Merging arm-dt/devicetree/arm-next (ede338f dt: add documentation of ARM dt boot interface)
Merging hwspinlock/linux-next (8b37fcf hwspinlock: add MAINTAINERS entries)
Merging pinctrl/for-next (d463f82 pinctrl: fix mutex deadlock in get_pinctrl_dev_from_of_node())
Merging vhost/linux-next (6713ce9 vhost: fix error handling in RESET_OWNER ioctl)
CONFLICT (content): Merge conflict in drivers/vhost/tcm_vhost.c
CONFLICT (content): Merge conflict in drivers/vhost/net.c
Merging memblock/memblock-kill-early_node_map (7bd0b0f memblock: Reimplement memblock allocation using reverse free area iterator)
Merging remoteproc/for-next (b977785 remoteproc: fix kconfig dependencies for VIRTIO)
CONFLICT (content): Merge conflict in drivers/remoteproc/Kconfig
Merging rpmsg/for-next (397944d rpmsg: fix kconfig dependencies for VIRTIO)
Merging irqdomain/irqdomain/next (560aa53 irqdomain: document the simple domain first_irq)
Merging gpio/gpio/next (753c598 gpio/em: Add Device Tree support)
Merging gpio-lw/for-next (ab6ec0f gpio/omap: ensure gpio context is initialised)
Merging gen-gpio/for_next (f4c5405 gpio: update gpio Chinese documentation)
CONFLICT (modify/delete): drivers/usb/otg/Kconfig deleted in HEAD and modified in gen-gpio/for_next. Version gen-gpio/for_next of drivers/usb/otg/Kconfig left in tree.
CONFLICT (content): Merge conflict in arch/sh/kernel/cpu/sh2a/Makefile
$ git rm -f drivers/usb/otg/Kconfig
Applying: gen-gpio: GPIOLIB merge fix up
Applying: merge fix for Convert selectors of GENERIC_GPIO to GPIOLIB
Applying: merge fix 2 for Convert selectors of GENERIC_GPIO to GPIOLIB
Merging mailbox/dbx500-prcmu-mailbox (c497eba mailbox: fix invalid use of sizeof in mailbox_msg_send())
Merging arm-soc/for-next (d664025 Merge branch 'next/multiplatform' into for-next)
CONFLICT (content): Merge conflict in drivers/usb/host/ohci-exynos.c
CONFLICT (content): Merge conflict in drivers/pinctrl/pinctrl-samsung.h
CONFLICT (content): Merge conflict in drivers/pinctrl/pinctrl-samsung.c
CONFLICT (content): Merge conflict in drivers/pinctrl/Makefile
CONFLICT (modify/delete): drivers/gpio/gpio-vt8500.c deleted in arm-soc/for-next and modified in HEAD. Version HEAD of drivers/gpio/gpio-vt8500.c left in tree.
CONFLICT (content): Merge conflict in drivers/clocksource/tegra20_timer.c
CONFLICT (content): Merge conflict in drivers/clocksource/Makefile
CONFLICT (content): Merge conflict in arch/arm/plat-orion/Makefile
CONFLICT (add/add): Merge conflict in arch/arm/mach-zynq/platsmp.c
CONFLICT (content): Merge conflict in arch/arm/mach-vexpress/v2m.c
CONFLICT (content): Merge conflict in arch/arm/mach-tegra/tegra.c
CONFLICT (content): Merge conflict in arch/arm/mach-tegra/hotplug.c
CONFLICT (content): Merge conflict in arch/arm/mach-spear/spear13xx.c
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2443.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2440.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2412.c
CONFLICT (content): Merge conflict in arch/arm/mach-s3c24xx/dma-s3c2410.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/omap_hwmod.c
CONFLICT (content): Merge conflict in arch/arm/mach-imx/mach-imx6q.c
CONFLICT (modify/delete): arch/arm/mach-imx/cpufreq.c deleted in arm-soc/for-next and modified in HEAD. Version HEAD of arch/arm/mach-imx/cpufreq.c left in tree.
CONFLICT (content): Merge conflict in arch/arm/mach-highbank/highbank.c
CONFLICT (content): Merge conflict in arch/arm/mach-exynos/cpuidle.c
CONFLICT (content): Merge conflict in arch/arm/boot/dts/at91sam9x5.dtsi
CONFLICT (content): Merge conflict in arch/arm/Kconfig
CONFLICT (content): Merge conflict in Documentation/kernel-parameters.txt
$ git rm -f drivers/gpio/gpio-vt8500.c arch/arm/mach-imx/cpufreq.c
Merging bcm2835/for-next (31880c3 Linux 3.9-rc6)
Merging cortex/for-next (4477ca4 ARM: ARMv7-M: Allow the building of new kernel port)
Merging ep93xx/ep93xx-for-next (7ec4429 Merge branch 'ep93xx-fixes' into ep93xx-for-next)
Merging imx-mxs/for-next (3795b56 Merge branches 'mxs/dt-3.11' and 'imx/dt-3.11' into for-next)
Merging ixp4xx/next (19f949f Linux 3.8)
Merging msm/for-next (1df357a Merge branch 'msm-defconfig' into for-next)
Merging renesas/next (cda9c03 Merge branch 'heads/soc-sh73a0' into next)
CONFLICT (content): Merge conflict in drivers/pinctrl/sh-pfc/Kconfig
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/setup-r8a7740.c
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-bockw.c
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
Merging samsung/for-next (e0f8f91 Merge branch 'next/late-exynos' into for-next)
CONFLICT (content): Merge conflict in arch/arm/mach-exynos/cpuidle.c
Merging tegra/for-next (c0c1cb1 Merge branch 'for-3.10/defconfig' into for-next)
Merging dma-mapping/dma-mapping-next (a937536 Linux 3.9-rc3)
Merging pwm/for-next (affb923 pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_config)
Merging dma-buf/for-next (5320c97 dma-buf: double unlock in debugfs code)
Merging userns/for-next (78008c4 proc: Restrict mounting the proc filesystem)
Merging ktest/for-next (df5f7c6 ktest: Reset grub menu cache with different machines)
Merging signal/for-next (99e621f syscalls.h: slightly reduce the jungles of macros)
CONFLICT (content): Merge conflict in include/asm-generic/unistd.h
CONFLICT (content): Merge conflict in fs/splice.c
CONFLICT (content): Merge conflict in fs/read_write.h
CONFLICT (content): Merge conflict in fs/read_write.c
CONFLICT (content): Merge conflict in fs/compat.c
CONFLICT (content): Merge conflict in arch/tile/kernel/compat.c
CONFLICT (content): Merge conflict in arch/tile/Kconfig
CONFLICT (content): Merge conflict in arch/mips/kernel/linux32.c
Applying: cond_syscall and SYSCALL_ALIAS merge fixup
Merging clk/clk-next (1e43525 clk: add clk_ignore_unused option to keep boot clocks on)
Merging random/dev (b980955 random: fix locking dependency with the tasklist_lock)
Merging lzo-update/lzo-update (42b775a lib/lzo: huge LZO decompression speedup on ARM by using unaligned access)
Merging scsi-post-merge/merge-base:master (65112dc Merge git://git.samba.org/sfrench/cifs-2.6)
Merging akpm-current/current (0fbd067 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc)
$ git checkout -b akpm remotes/origin/akpm/master
Applying: revert "ipc: don't allocate a copy larger than max"
Applying: drivers/char/random.c: fix priming of last_data
Applying: sound/soc/codecs/si476x.c: don't use 0bNNN
Applying: x86: make 'mem=' option to work for efi platform
Applying: kernel/auditfilter.c: tree and watch will memory leak when failure occurs
Applying: kernel/audit_tree.c: tree will leak memory when failure occurs in audit_trim_trees()
Applying: drm/fb-helper: don't sleep for screen unblank when an oops is in progress
Applying: drivers/video: implement a simple framebuffer driver
Applying: drivers-video-implement-a-simple-framebuffer-driver-fix
Applying: cyber2000fb: avoid palette corruption at higher clocks
Applying: inotify: invalid mask should return a error number but not set it
Applying: inotify-invalid-mask-should-return-a-error-number-but-not-set-it-fix
Applying: posix_cpu_timer: consolidate expiry time type
Applying: posix_cpu_timers: consolidate timer list cleanups
Applying: posix_cpu_timers: consolidate expired timers check
Applying: selftests: add basic posix timers selftests
Applying: posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
Applying: posix_timers: Fix racy timer delta caching on task exit
Applying: ipvs: change type of netns_ipvs->sysctl_sync_qlen_max
Applying: lockdep: introduce lock_acquire_exclusive/shared helper macros
Applying: lglock: update lockdep annotations to report recursive local locks
Applying: block: restore /proc/partitions to not display non-partitionable removable devices
Applying: fs/block_dev.c: no need to check inode->i_bdev in bd_forget()
Applying: fs/dcache.c: add cond_resched() to shrink_dcache_parent()
Applying: watchdog: trigger all-cpu backtrace when locked up and going to panic
Applying: vm: adjust ifdef for TINY_RCU
Applying: mm: frontswap: lazy initialization to allow tmem backends to build/run as modules
Applying: frontswap: make frontswap_init use a pointer for the ops
Applying: mm: frontswap: cleanup code
Applying: frontswap: get rid of swap_lock dependency
Applying: mm: cleancache: lazy initialization to allow tmem backends to build/run as modules
Applying: cleancache: Make cleancache_init use a pointer for the ops
Applying: mm: cleancache: clean up cleancache_enabled
Applying: xen: tmem: enable Xen tmem shim to be built/loaded as a module
Applying: xen-tmem-enable-xen-tmem-shim-to-be-built-loaded-as-a-module-fix
Applying: zcache/tmem: Better error checking on frontswap_register_ops return value.
Applying: staging: zcache: enable ramster to be built/loaded as a module
Applying: staging-zcache-enable-ramster-to-be-built-loaded-as-a-module-fix
Applying: staging: zcache: enable zcache to be built/loaded as a module
Applying: mm/SPARC: use common help functions to free reserved pages
Applying: clear_refs: sanitize accepted commands declaration
Applying: clear_refs-sanitize-accepted-commands-declaration-fix
Applying: clear_refs: introduce private struct for mm_walk
Applying: pagemap: introduce pagemap_entry_t without pmshift bits
Applying: pagemap: introduce the /proc/PID/pagemap2 file
Applying: mm: soft-dirty bits for user memory changes tracking
Applying: mem-soft-dirty: Reshuffle CONFIG_ options to be more Arch-friendly
Applying: selftest: add simple test for soft-dirty bit
Applying: mm: remove free_area_cache
Applying: include/linux/mmzone.h: cleanups
Applying: include-linux-mmzoneh-cleanups-fix
Applying: mm: memmap_init_zone() performance improvement
Applying: drop_caches: add some documentation and info message
Applying: drivers/usb/gadget/amd5536udc.c: avoid calling dma_pool_create() with NULL dev
Applying: mm/dmapool.c: fix null dev in dma_pool_create()
Applying: memcg: debugging facility to access dangling memcgs
Applying: memcg-debugging-facility-to-access-dangling-memcgs-fix
Applying: mm: add vm event counters for balloon pages compaction
Applying: kernel/range.c: subtract_range: fix the broken phrase issued by printk
Applying: smp: Give WARN()ing when calling smp_call_function_many()/single() in serving irq
Applying: x86: don't show trace beyond show_stack(NULL, NULL)
Applying: sparc32: make show_stack() acquire %fp if @_ksp is not specified
Applying: dump_stack: consolidate dump_stack() implementations and unify their behaviors
Applying: dmi: morph dmi_dump_ids() into dmi_format_ids() which formats into a buffer
Applying: dump_stack: implement arch-specific hardware description in task dumps
Applying: dump_stack: unify debug information printed by show_regs()
Applying: arc, print-fatal-signals: reduce duplicated information
Applying: kthread: implement probe_kthread_data()
Applying: workqueue: include workqueue info when printing debug dump of a worker task
Applying: writeback: set worker desc to identify writeback workers in task dumps
Applying: kernel/smp.c: use '|=' for csd_lock
Applying: kernel/smp.c: remove 'priv' of call_single_data
Applying: include/linux/fs.h: disable preempt when acquire i_size_seqcount write lock
Applying: kernel/smp.c: cleanups
Applying: kmsg: honor dmesg_restrict sysctl on /dev/kmsg
Applying: drivers/leds/leds-ot200.c: fix error caused by shifted mask
Applying: lib/string_helpers: introduce generic string_unescape
Applying: lib-string_helpers-introduce-generic-string_unescape-fix
Applying: staging: speakup: remove custom string_unescape_any_inplace
Applying: dynamic_debug: reuse generic string_unescape function
Applying: binfmt_misc: reuse string_unescape_inplace()
Applying: kernel/compat.c: make do_sysinfo() static
Applying: kernel/timer.c: convert compat_sys_sysinfo to COMPAT_SYSCALL_DEFINE
Applying: kernel/timer.c: move some non timer related syscalls to kernel/sys.c
Applying: kernel-timerc-ove-some-non-timer-related-syscalls-to-kernel-sysc-checkpatch-fixes
Applying: epoll: trim epitem by one cache line
Applying: epoll-trim-epitem-by-one-cache-line-on-x86_64-fix
Applying: epoll: comment + BUILD_BUG_ON to prevent epitem bloat
Applying: epoll: use RCU to protect wakeup_source in epitem
Applying: epoll: fix suspicious RCU usage in ep_poll_callback
Applying: epoll: lock ep->mtx in ep_free to silence lockdep
Applying: epoll: cleanup: hoist out f_op->poll calls
Applying: epoll: cleanup: use RCU_INIT_POINTER when nulling
Applying: fs: make binfmt support for #! scripts modular and removable
Applying: binfmt_elf: PIE: make PF_RANDOMIZE check comment more accurate
Applying: binfmt_elf.c: use get_random_int() to fix entropy depleting
Applying: dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()
Applying: dmi_scan: proper buf type in dmi_present()
Applying: i2o: check copy_from_user() size parameter
Applying: drivers/rtc/rtc-v3020.c: use gpio_request_array()
Applying: drivers/rtc/rtc-pxa.c: fix set time sync time issue
Applying: drivers-rtc-rtc-pxac-fix-set-time-sync-time-issue-fix
Applying: drivers/rtc/rtc-pxa.c: use devm_* APIs
Applying: nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption
Applying: nilfs2-fix-issue-with-flush-kernel-thread-after-remount-in-ro-mode-because-of-drivers-internal-error-or-metadata-corruption-fix
Applying: nilfs2: fix using of PageLocked() in nilfs_clear_dirty_page()
Applying: nilfs2: remove unneeded test in nilfs_writepage()
Applying: hfs: add error checking for hfs_find_init()
Applying: hfsplus: fix warnings in fs/hfsplus/bfind.c
Applying: hfsplus-fix-warnings-in-fs-hfsplus-bfindc-in-function-hfs_find_1st_rec_by_cnid-fix
Applying: hfs/hfsplus: convert dprint to hfs_dbg
Applying: hfs/hfsplus: convert printks to pr_<level>
Applying: hfsplus: add error propagation to __hfsplus_ext_write_extent()
Applying: hfsplus: remove duplicated message prefix in hfsplus_block_free()
Applying: fat: additions to support fat_fallocate
Applying: fat-additions-to-support-fat_fallocate-fix
Applying: ptrace: add ability to retrieve signals without removing from a queue (v4)
Applying: selftest: add a test case for PTRACE_PEEKSIGINFO
Applying: usermodehelper: export call_usermodehelper_exec() and call_usermodehelper_setup()
Applying: usermodehelper-export-_exec-and-_setup-functions-fix
Applying: kmod: split call to call_usermodehelper_fns()
Applying: KEYS: split call to call_usermodehelper_fns()
Applying: coredump: remove trailling whitespace
Applying: usermodehelper: split remaining calls to call_usermodehelper_fns()
Applying: kmod: remove call_usermodehelper_fns()
Applying: coredump: only SIGKILL should interrupt the coredumping task
Applying: coredump: ensure that SIGKILL always kills the dumping thread
Applying: coredump: sanitize the setting of signal->group_exit_code
Applying: coredump: introduce dump_interrupted()
Applying: coredump: factor out the setting of PF_DUMPCORE
Applying: coredump: change wait_for_dump_helpers() to use wait_event_interruptible()
Applying: fs, proc: truncate /proc/pid/comm writes to first TASK_COMM_LEN bytes
Applying: set_task_comm: kill the pointless memset() + wmb()
Applying: exec: do not abuse ->cred_guard_mutex in threadgroup_lock()
Applying: kexec: fix wrong types of some local variables
Applying: kexec: Use min() and min_t() to simplify logic
Applying: kexec-use-min_t-to-simplify-logic-fix
Applying: ipc: clamp with min()
Applying: ipc: separate msg allocation from userspace copy
Applying: ipc: tighten msg copy loops
Applying: ipc: set EFAULT as default error in load_msg()
Applying: ipc: remove msg handling from queue scan
Applying: ipc: implement MSG_COPY as a new receive mode
Applying: ipc: simplify msg list search
Applying: ipc: refactor msg list search into separate function
Applying: ipc: find_msg can be static
Applying: ipc/msgutil.c: use linux/uaccess.h
Applying: ipc: remove bogus lock comment for ipc_checkid
Applying: ipc: introduce obtaining a lockless ipc object
Applying: ipc-introduce-obtaining-a-lockless-ipc-object-fix
Applying: ipc: introduce lockless pre_down ipcctl
Applying: ipc,sem: do not hold ipc lock more than necessary
Applying: ipc,sem: prevent releasing RCU read lock twice in semctl_main
Applying: ipcsem-do-not-hold-ipc-lock-more-than-necessary-fix-checkpatch-fixes
Applying: ipc,sem: open code and rename sem_lock
Applying: ipcsem-open-code-and-rename-sem_lock-fix
Applying: ipc,sem: have only one list in struct sem_queue
Applying: ipc,sem: fine grained locking for semtimedop
Applying: fix for sem_lock
Applying: ipc, sem: prevent possible deadlock
Applying: ipc,sem: fix locking in semctl_main
Applying: ipc,sem: untangle RCU locking with find_alloc_undo
Applying: ipc, sem: do not call sem_lock when bogus sma
Applying: ipc: make refcounter atomic
Applying: ipc,sem: fix lockdep false positive
Applying: ipc/msg.c: use list_for_each_entry_[safe] for list traversing
Applying: ipc: sysv shared memory limited to 8TiB
Applying: ipc-sysv-shared-memory-limited-to-8tib-fix
Applying: ipc/sem.c: alternatives to preempt_disable()
Applying: mwave: fix info leak in mwave_ioctl()
Applying: rapidio: make enumeration/discovery configurable
Applying: rapidio: add enumeration/discovery start from user space
Applying: rapidio: documentation update for enumeration changes
Applying: rbtree_test: add extra rbtree integrity check
Applying: rbtree_test: add __init/__exit annotations
Applying: kernel/pid.c: improve flow of a loop inside alloc_pidmap.
Applying: kernel-pidc-improve-flow-of-a-loop-inside-alloc_pidmap-fix
Applying: pid_namespace.c/.h: simplify defines
Applying: pid_namespacec-h-simplify-defines-fix
Applying: nbd: increase default and max request sizes
Applying: aoe: replace kmalloc and then memcpy with kmemdup
Applying: drivers/net: rename random32() to prandom_u32()
Applying: drivers-net-rename-random32-to-prandom_u32-fix
Applying: brcm80211: fix the misaligned indentation
Applying: remove unused random32() and srandom32()
Applying: random: fix accounting race condition with lockless irq entropy_count update
Applying: pps: hide more configuration symbols behind CONFIG_PPS
Applying: pps: pps_kc_hardpps_lock can be static
Applying: semaphore: use unlikely() for down's timeout
Applying: semaphore: use `bool' type for semaphore_waiter's up
Applying: drivers/memstick/host/r592.c: make r592_pm_ops static
Applying: kernel/relay.c: remove unused function argument actor
Applying: kernel/relay.c: move FIX_SIZE macro into relay.c
Applying: relay: use macro PAGE_ALIGN instead of FIX_SIZE
Applying: relay: fix timer madness
Applying: mm: remove old aio use_mm() comment
Applying: aio: remove dead code from aio.h
Applying: gadget: remove only user of aio retry
Applying: gadget-remove-only-user-of-aio-retry-checkpatch-fixes
Applying: aio: remove retry-based AIO
Applying: aio-remove-retry-based-aio-checkpatch-fixes
Applying: char: add aio_{read,write} to /dev/{null,zero}
Applying: aio: kill return value of aio_complete()
Applying: aio: add kiocb_cancel()
Applying: aio: move private stuff out of aio.h
Applying: aio: dprintk() -> pr_debug()
Applying: aio: do fget() after aio_get_req()
Applying: aio: make aio_put_req() lockless
Applying: aio-make-aio_put_req-lockless-checkpatch-fixes
Applying: aio: refcounting cleanup
Applying: aio-refcounting-cleanup-checkpatch-fixes
Applying: wait: add wait_event_hrtimeout()
Applying: aio: make aio_read_evt() more efficient, convert to hrtimers
Applying: aio-make-aio_read_evt-more-efficient-convert-to-hrtimers-checkpatch-fixes
Applying: aio: use flush_dcache_page()
Applying: aio: use cancellation list lazily
Applying: aio: change reqs_active to include unreaped completions
Applying: aio: kill batch allocation
Applying: aio: kill struct aio_ring_info
Applying: aio: give shared kioctx fields their own cachelines
Applying: aio: reqs_active -> reqs_available
Applying: aio: percpu reqs_available
Applying: generic dynamic per cpu refcounting
Applying: generic-dynamic-per-cpu-refcounting-checkpatch-fixes
Applying: generic-dynamic-per-cpu-refcounting-fix
Applying: aio: percpu ioctx refcount
Applying: aio: use xchg() instead of completion_lock
Applying: aio: don't include aio.h in sched.h
Applying: aio-dont-include-aioh-in-schedh-fix
Applying: aio: kill ki_key
Applying: aio: kill ki_retry
Applying: aio-kill-ki_retry-fix
Applying: aio-kill-ki_retry-checkpatch-fixes
Applying: block: prep work for batch completion
Applying: block-prep-work-for-batch-completion-checkpatch-fixes
Applying: block-prep-work-for-batch-completion-checkpatch merge fixes
Applying: block-prep-work-for-batch-completion-fix-2
Applying: block-prep-work-for-batch-completion-fix-3
Applying: block-prep-work-for-batch-completion-fix-3-fix
Applying: block-prep-work-for-batch-completion-fix-4
Applying: block-prep-work-for-batch-completion-fix-99
Applying: block, aio: batch completion for bios/kiocbs
Applying: block-aio-batch-completion-for-bios-kiocbs-checkpatch-fixes
Applying: block-aio-batch-completion-for-bios-kiocbs-fix
Applying: virtio-blk: convert to batch completion
Applying: mtip32xx: convert to batch completion
Applying: aio: fix kioctx not being freed after cancellation at exit time
Applying: Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
Applying: kconfig-consolidate-config_debug_strict_user_copy_checks-fix
Applying: kconfig menu: move Virtualization drivers near other virtualization options
Applying: init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display
Applying: UAPI: remove empty Kbuild files
Applying: kernel/sys.c: make prctl(PR_SET_MM) generally available
Applying: notifier-error-inject: fix module names in Kconfig
Applying: decompressor: add LZ4 decompressor module
Applying: lib: add support for LZ4-compressed kernel
Applying: arm: add support for LZ4-compressed kernel
Applying: x86: add support for LZ4-compressed kernel
Applying: lib: add lz4 compressor module
Applying: lib-add-lz4-compressor-module-fix
Applying: crypto: add lz4 Cryptographic API
Applying: crypto-add-lz4-cryptographic-api-fix
Applying: lib/decompress.c: fix initconst
Applying: seccomp: add generic code for jitted seccomp filters.
Applying: ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.
Applying: ARM: net: bpf_jit: add support for jitted seccomp filters.
Applying: bpf: add comments explaining the schedule_work() operation
Applying: kgdb/sysrq: fix inconstistent help message of sysrq key
Applying: power/sysrq: fix inconstistent help message of sysrq key
Applying: ARM/etm/sysrq: fix inconstistent help message of sysrq key
Applying: powerpc/xmon/sysrq: fix inconstistent help message of sysrq key
Applying: sparc/sysrq: fix inconstistent help message of sysrq key
Applying: ethernet/emac/sysrq: fix inconstistent help message of sysrq key
Applying: Documentation/sysrq: fix inconstistent help message of sysrq key
Merging akpm/master (843d8e2 Documentation/sysrq: fix inconstistent help message of sysrq key)

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.9.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_UIDGID_CONVERTED=y
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
CONFIG_MODULE_SIG_SHA224=y
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha224"
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
# CONFIG_X86_MPPARSE is not set CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_LPSS is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y CONFIG_HAVE_BOOTMEM_INFO_NODE=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not set CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_MEM_SOFT_DIRTY is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=m
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=m
CONFIG_PCI_LABEL=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
CONFIG_YENTA_TOSHIBA=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_NETLINK_MMAP=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=m
# CONFIG_ATM_LANE is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
# CONFIG_IPDDP_ENCAP is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_NETPRIO_CGROUP=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_YAM=y
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=m
# CONFIG_BT_ATH3K is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
# CONFIG_MAC80211_MLME_DEBUG is not set
# CONFIG_MAC80211_STA_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
# CONFIG_MAC80211_MPL_DEBUG is not set
# CONFIG_MAC80211_MPATH_DEBUG is not set
CONFIG_MAC80211_MHWMP_DEBUG=y
# CONFIG_MAC80211_MESH_SYNC_DEBUG is not set
CONFIG_MAC80211_MESH_PS_DEBUG=y
# CONFIG_MAC80211_TDLS_DEBUG is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_NFC=y
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
# CONFIG_NFC_PN544 is not set
# CONFIG_NFC_MICROREAD is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=y
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_SC520CDP is not set
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_ESB2ROM is not set
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=m
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=y
CONFIG_MTD_GPIO_ADDR=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
# CONFIG_MTD_LATCH_ADDR is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_SLRAM=y
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=m
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
# CONFIG_BMP085_I2C is not set
CONFIG_PCH_PHUB=m
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_SRAM=y
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline #
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=m
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_BUILD_FIRMWARE=y
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_BUILD_FIRMWARE=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=m
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_MPT3SAS is not set
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_HPTIOP=m
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=y
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NOSY=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=y
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
CONFIG_VETH=m
# CONFIG_VIRTIO_NET is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
CONFIG_ATM_ENI_TUNE_BURST=y
# CONFIG_ATM_ENI_BURST_TX_16W is not set
CONFIG_ATM_ENI_BURST_TX_8W=y
# CONFIG_ATM_ENI_BURST_TX_4W is not set
# CONFIG_ATM_ENI_BURST_TX_2W is not set
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
# CONFIG_ATM_ENI_BURST_RX_2W is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=m
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=m
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m

#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
CONFIG_VHOST_RING=m

#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=m
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
CONFIG_MACB=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_BNX2X=y
CONFIG_BNX2X_SRIOV=y
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_DNET=m
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IGB is not set
CONFIG_IGBVF=m
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
# CONFIG_MLX4_DEBUG is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
# CONFIG_SIS190 is not set
CONFIG_SFC=y
# CONFIG_SFC_MTD is not set
# CONFIG_SFC_MCDI_MON is not set
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PLATFORM is not set
CONFIG_STMMAC_PCI=y
CONFIG_STMMAC_DEBUG_FS=y
# CONFIG_STMMAC_DA is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_FDDI=m
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=m
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=m
# CONFIG_PPP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_CDC_PHONET=m
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_WLAN is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
CONFIG_DSCC4_PCI_RST=y
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_ISDN=y
# CONFIG_ISDN_CAPI is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set

#
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=m
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=m
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=m
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF50633_PMU is not set
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_CMA3000=m
# CONFIG_INPUT_CMA3000_I2C is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_DEVKMEM=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_NVRAM=m
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=m
CONFIG_TCG_ST33_I2C=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_CBUS_GPIO=y CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
CONFIG_PTP_1588_CLOCK_PCH=m CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=m
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_TS5500 is not set
CONFIG_GPIO_SCH=m
CONFIG_GPIO_ICH=m
CONFIG_GPIO_VX855=m
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM8350 is not set
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_LANGWELL=y
CONFIG_GPIO_PCH=y
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MCP23S08=y

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=m
# CONFIG_GPIO_TPS6586X is not set
# CONFIG_GPIO_TPS65910 is not set

#
# USB GPIO expanders:
#
CONFIG_GPIO_VIPERBOARD=m
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LP8788 is not set
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DA9055 is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_MC13783_ADC=m

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_THERMAL_EMULATION=y CONFIG_INTEL_POWERCLAMP=y
# CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_CROS_EC=m
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=m
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TIMBERDALE=y
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HDMI=y
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
CONFIG_FB_VGA16=m
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=m
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
# CONFIG_FB_INTEL_I2C is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_GOLDFISH=m
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_AAT2870=y
# CONFIG_BACKLIGHT_LM3630 is not set
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=m
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO_TPKBD=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_WIIMOTE_EXT is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_RENESAS_USBHS_HCD is not set
CONFIG_USB_WHCI_HCD=m
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_RENESAS_USBHS=m

#
# USB Device Class drivers
#
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_ATM is not set
# CONFIG_USB_PHY is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_RENESAS_USBHS_UDC is not set
CONFIG_USB_PXA27X=m
CONFIG_USB_MV_UDC=m
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_M66592=m
CONFIG_USB_AMD5536UDC=m
# CONFIG_USB_NET2272 is not set
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_ZERO=m
# CONFIG_USB_ETH is not set
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
# CONFIG_USB_FUNCTIONFS_GENERIC is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_G_HID is not set
CONFIG_UWB=y
# CONFIG_UWB_HWA is not set
CONFIG_UWB_WHCI=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8788=m
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA9633=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=m
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_INFINIBAND_QIB=y
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_SRP=m
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=y
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=m
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_MBOX_KFIFO_SIZE=256
CONFIG_MBOX_DATA_SIZE=4
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m

#
# Analog to digital converters
#
CONFIG_LP8788_ADC=y
# CONFIG_MAX1363 is not set
CONFIG_TI_ADC081C=m
# CONFIG_VIPERBOARD_ADC is not set

#
# Amplifiers
#

#
# Hid Sensor IIO Common
#
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5380=m
# CONFIG_AD5446 is not set
CONFIG_MAX517=m
# CONFIG_MCP4725 is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=m

#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_SENSORS_TSL2563=m
CONFIG_VCNL4000=m

#
# Magnetometer sensors
#
CONFIG_AK8975=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=m
CONFIG_EFI_VARS_PSTORE=m
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EFS_FS=y
# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_LOGFS=y
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
CONFIG_EXOFS_DEBUG=y
# CONFIG_F2FS_FS is not set
# CONFIG_EFIVAR_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set

#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_MEMORY_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENT is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_TEST_SYSCALLS is not set
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_TRACE_EVENTS=m
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_SAMPLE_KDB=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
CONFIG_CRYPTO_TWOFISH_AVX2_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y

#30 lore raw
Quoted 38 lines · ZX
Quoted 16 lines · Stephen Rothwell

Hi all,

Please do not add any v3.11 destined work to your linux-next included branches until after v3.10-rc1 is released.

Changes since 20130430:

The nfsd tree lost its build failure.

The xfs tree lost its build failure.

The vfs tree gained conflicts against Linus' and the powerpc trees and gained a build failure for which I applied a merge fix patch.

The drm-intel tree gained a conflict against the drm tree.

Quoted 7 lines

The block tree gained a conflict against Linus' tree.

The arm-soc tree gained a conflict against the arm tree.

The akpm tree lost a lot of patches that turned up elsewhere.

----------------------------------------------------------------------------

randconf build failure:

make -C drivers/scsi/aic7xxx/aicasm
*** Install db development libraries
gcc -I/usr/include -I. aicasm.c aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c -o aicasm -ldb aicasm_symbol.c:48:19: fatal error: aicdb.h: No such file or directory compilation terminated.

Quoted 3 lines

random config file attached.

You need to install berkeley db ...

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)