Documentation: Various tweaks/fixes for ch 4, ref manual
PATCH 1/1 Documentation: Various tweaks/fixes for ch 4, ref manual
---
documentation/ref-manual/technical-details.xml +45 -41
@@ -60,9 +60,9 @@ and is responsible for parsing the <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>, generating a list of tasks from it, and then executing those tasks. - To see a list of the options BitBake supports, use the following - help command: + To see a list of the options BitBake supports, use either of: <literallayout class='monospaced'> + $ bitbake -h $ bitbake --help </literallayout> </para>
@@ -72,7 +72,7 @@ <filename>packagename</filename> is the name of the package you want to build (referred to as the "target" in this manual). The target often equates to the first part of a <filename>.bb</filename> filename. - So, to run the <filename>matchbox-desktop_1.2.3.bb</filename> file, you + So, to process the <filename>matchbox-desktop_1.2.3.bb</filename> recipe file, you might type the following: <literallayout class='monospaced'> $ bitbake matchbox-desktop
@@ -111,14 +111,15 @@ <para> The <filename>.bb</filename> files are usually referred to as "recipes." In general, a recipe contains information about a single piece of software. - The information includes the location from which to download the source patches + This information includes the location from which to download the + pristine source, any source patches to be applied to that source (if any are needed), which special configuration options to apply, how to compile the source files, and how to package the compiled output. </para> <para> - The term "package" can also be used to describe recipes. - However, since the same word is used for the packaged output from the OpenEmbedded + The term "package" is sometimes (confusingly) used to refer to recipes. However, + since the word "package" is used for the packaged output from the OpenEmbedded build system (i.e. <filename>.ipk</filename> or <filename>.deb</filename> files), this document avoids using the term "package" when referring to recipes. </para>
@@ -162,7 +163,7 @@ <ulink url='&YOCTO_DOCS_DEV_URL;#cross-development-toolchain'>cross-development toolchains</ulink>. This section provides some technical background information on how cross-development toolchains are created and used. - For more information on these toolchain, you can also see the + For more information on toolchains, you can also see the <ulink url='&YOCTO_DOCS_ADT_URL;'>the Yocto Project Application Developer's Guide</ulink>. </para>
@@ -347,7 +348,7 @@ As mentioned in the previous paragraph, building from scratch ensures that everything is current and starts from a known state. However, building from scratch also takes much longer as it generally means - rebuilding things that do not necessarily need rebuilt. + rebuilding things that do not necessarily need to be rebuilt. </para> <para>
@@ -355,10 +356,11 @@ The implementation of the shared state code answers the following questions that were fundamental roadblocks within the OpenEmbedded incremental build support system: <itemizedlist> - <listitem>What pieces of the system have changed and what pieces have not changed?</listitem> - <listitem>How are changed pieces of software removed and replaced?</listitem> - <listitem>How are pre-built components that do not need to be rebuilt from scratch - used when they are available?</listitem> + <listitem><para>What pieces of the system have changed and what pieces have + not changed?</para></listitem> + <listitem><para>How are changed pieces of software removed and replaced?</para></listitem> + <listitem><para>How are pre-built components that do not need to be rebuilt from scratch + used when they are available?</para></listitem> </itemizedlist> </para>
@@ -397,16 +399,16 @@ <para> When determining what parts of the system need to be built, BitBake - uses a per-task basis and does not use a per-recipe basis. + works on a per-task basis rather than a per-recipe basis. You might wonder why using a per-task basis is preferred over a per-recipe basis. To help explain, consider having the IPK packaging backend enabled and then switching to DEB. In this case, <filename>do_install</filename> and <filename>do_package</filename> - output are still valid. + outputs are still valid. However, with a per-recipe approach, the build would not include the <filename>.deb</filename> files. Consequently, you would have to invalidate the whole build and rerun it. - Rerunning everything is not the best situation. - Also in this case, the core must be "taught" much about specific tasks. + Rerunning everything is not the best solution. + Also, in this case, the core must be "taught" much about specific tasks. This methodology does not scale well and does not allow users to easily add new tasks in layers or as external recipes without touching the packaged-staging core. </para>
@@ -512,17 +514,18 @@ dependent task hashes can be influenced. Within the BitBake configuration file, we can give BitBake some extra information to help it construct the basehash. - The following statements effectively result in a list of global variable + The following statement effectively results in a list of global variable dependency excludes - variables never included in any checksum: <literallayout class='monospaced'> - BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH" - BB_HASHBASE_WHITELIST += "DL_DIR SSTATE_DIR THISDIR FILESEXTRAPATHS" - BB_HASHBASE_WHITELIST += "FILE_DIRNAME HOME LOGNAME SHELL TERM USER" - BB_HASHBASE_WHITELIST += "FILESPATH USERNAME STAGING_DIR_HOST STAGING_DIR_TARGET" + BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH DL_DIR \ + SSTATE_DIR THISDIR FILESEXTRAPATHS FILE_DIRNAME HOME LOGNAME SHELL TERM \ + USER FILESPATH STAGING_DIR_HOST STAGING_DIR_TARGET COREBASE PRSERV_HOST \ + PRSERV_DUMPDIR PRSERV_DUMPFILE PRSERV_LOCKDOWN PARALLEL_MAKE \ + CCACHE_DIR EXTERNAL_TOOLCHAIN CCACHE CCACHE_DISABLE LICENSE_PATH SDKPKGSUFFIX" </literallayout> - The previous example actually excludes + The previous example excludes <link linkend='var-WORKDIR'><filename>WORKDIR</filename></link> - since it is actually constructed as a path within + since that variable is actually constructed as a path within <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>, which is on the whitelist. </para>
@@ -541,7 +544,7 @@ <filename>OE-Core</filename> uses the "OEBasicHash" signature handler by default through this setting in the <filename>bitbake.conf</filename> file: <literallayout class='monospaced'> - BB_SIGNATURE_HANDLER ?= "OEBasicHash" + BB_SIGNATURE_HANDLER ?= "OEBasicHash" </literallayout> The "OEBasicHash" <filename>BB_SIGNATURE_HANDLER</filename> is the same as the "OEBasic" version but adds the task hash to the stamp files.
@@ -550,7 +553,7 @@ change that changes the task hash, automatically causing the task to be run again. This removes the need to bump <link linkend='var-PR'><filename>PR</filename></link> - values and changes to Metadata automatically ripple across the build. + values, and changes to Metadata automatically ripple across the build. </para> <para>
@@ -558,10 +561,10 @@ make some dependency and hash information available to the build. This information includes: <literallayout class='monospaced'> - BB_BASEHASH_task-<taskname> - the base hashes for each task in the recipe - BB_BASEHASH_<filename:taskname> - the base hashes for each dependent task - BBHASHDEPS_<filename:taskname> - The task dependencies for each task - BB_TASKHASH - the hash of the currently running task + BB_BASEHASH_task-<taskname> - the base hashes for each task in the recipe + BB_BASEHASH_<filename:taskname> - the base hashes for each dependent task + BBHASHDEPS_<filename:taskname> - The task dependencies for each task + BB_TASKHASH - the hash of the currently running task </literallayout> </para> </section>
@@ -571,7 +574,7 @@ <para> Checksums and dependencies, as discussed in the previous section, solve half the - problem. + problem of supporting a shared state. The other part of the problem is being able to use checksum information during the build and being able to reuse or rebuild specific components. </para>
@@ -581,7 +584,7 @@ is a relatively generic implementation of how to "capture" a snapshot of a given task. The idea is that the build process does not care about the source of a task's output. Output could be freshly built or it could be downloaded and unpacked from - somewhere - the build process does not need to worry about its source. + somewhere - the build process does not need to worry about its origin. </para> <para>
@@ -598,7 +601,7 @@ <filename>sstate.bbclass</filename>. From a user's perspective, adding shared state wrapping to a task is as simple as this <filename>do_deploy</filename> example taken from - <filename>do_deploy.bbclass</filename>: + <filename>deploy.bbclass</filename>: <literallayout class='monospaced'> DEPLOYDIR = "${WORKDIR}/deploy-${PN}" SSTATETASKS += "do_deploy"
@@ -610,8 +613,9 @@ sstate_setscene(d) } addtask do_deploy_setscene + do_deploy[dirs] = "${DEPLOYDIR} ${B}" </literallayout> - In the example, we add some extra flags to the task, a name field ("deploy"), an + In this example, we add some extra flags to the task, a name field ("deploy"), an input directory where the task sends data, and the output directory where the data from the task should eventually be copied. We also add a <filename>_setscene</filename> variant of the task and add the task
@@ -752,7 +756,7 @@ To avoid these problems during the build, you need to understand the effects of any change you make. Note that any changes you make directly to a function automatically are factored into - the checksum calculation and thus, will invalidate the associated area of sstate cache. + the checksum calculation and thus will invalidate the associated area of sstate cache. You need to be aware of any implicit changes that are not obvious changes to the code and could affect the output of a given task. Once you are aware of such changes, you can take steps to invalidate the cache
@@ -868,7 +872,7 @@ <para> <ulink url='http://en.wikipedia.org/wiki/Wayland_(display_server_protocol)#Weston'>Wayland</ulink> - is a computer display server protocol that when implemented + is a computer display server protocol that provides a method for compositing window managers to communicate directly with applications and video hardware and expects them to communicate with input hardware using other libraries.
@@ -879,7 +883,7 @@ <para> The Yocto Project provides the Wayland protocol libraries and the - reference Weston compositor as part of it release. + reference Weston compositor as part of its release. This section describes what you need to do to implement Wayland and use the compositor when building an image for a supporting target. </para>
@@ -974,7 +978,7 @@ <para> Alternatively, you can run Weston through the command-line interpretor (CLI), which is better suited for development work. - To run Weston under the CLI you need to do the following after + To run Weston under the CLI, you need to do the following after your image is built: <orderedlist> <listitem><para>Run these commands to export
@@ -1163,7 +1167,7 @@ </literallayout> As a convenience, you do not need to specify the complete license string in the whitelist for every package. - you can use an abbreviated form, which consists + You can use an abbreviated form, which consists of just the first portion or portions of the license string before the initial underscore character or characters. A partial string will match
@@ -1185,10 +1189,10 @@ License flag matching allows you to control what recipes the OpenEmbedded build system includes in the build. Fundamentally, the build system attempts to match - <filename>LICENSE_FLAG</filename> strings found in + <filename>LICENSE_FLAGS</filename> strings found in recipes against <filename>LICENSE_FLAGS_WHITELIST</filename> strings found in the whitelist. - A match, causes the build system to include a recipe in the + A match causes the build system to include a recipe in the build, while failure to find a match causes the build system to exclude a recipe. </para>
@@ -1249,7 +1253,7 @@ <para> This scheme works even if the - <filename>LICENSE_FLAG</filename> string already + <filename>LICENSE_FLAGS</filename> string already has <filename>_${PN}</filename> appended. For example, the build system turns the license flag "commercial_1.2_foo" into "commercial_1.2_foo_foo" and would
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Patch applied.
Quoted 362 lines
-----Original Message-----
From: Robert P. J. Day [mailto:[email protected]]
Sent: Wednesday, November 06, 2013 10:06 AM
To: Yocto discussion list
Cc: Rifenbark, Scott M
Subject: [PATCH] Documentation: Various tweaks/fixes for ch 4, ref manualSigned-off-by Robert P. J. Day <[email protected]>---
documentation/ref-manual/technical-details.xml +2
-2@@ -60,9 +60,9 @@ and is responsible for parsing the <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>, generating a list of tasks from it, and then executing those tasks. - To see a list of the options BitBake supports, use the following - help command: + To see a list of the options BitBake supports, use either of: <literallayout class='monospaced'> + $ bitbake -h $ bitbake --help </literallayout> </para>@@ -72,7 +72,7 @@ <filename>packagename</filename> is the name of the package youwant to build
(referred to as the "target" in this manual). The target often equates to the first part of a
<filename>.bb</filename> filename.
- So, to run the <filename>matchbox-desktop_1.2.3.bb</filename> file,
youdocumentation/ref-manual/technical-details.xml +2
-0+ So, to process the + <filename>matchbox-desktop_1.2.3.bb</filename> recipe file, you might type the following: <literallayout class='monospaced'> $ bitbake matchbox-desktop@@ -111,14 +111,15 @@ <para> The <filename>.bb</filename> files are usually referred to as"recipes."
In general, a recipe contains information about a single piece of
software.
- The information includes the location from which to download the
source patchesdocumentation/ref-manual/technical-details.xml +3
-0+ This information includes the location from which to download the + pristine source, any source patches to be applied to that + source (if any are needed), which special configuration options to apply, how to compile the source files, and how to package the compiledoutput.
</para> <para>documentation/ref-manual/technical-details.xml +0
-2- The term "package" can also be used to describe recipes. - However, since the same word is used for the packaged output fromthe OpenEmbedded
+ The term "package" is sometimes (confusingly) used to refer to
recipes. However,
+ since the word "package" is used for the packaged output
+ from the OpenEmbedded
build system (i.e. <filename>.ipk</filename> or
<filename>.deb</filename> files),
this document avoids using the term "package" when referring to
recipes.</para>documentation/ref-manual/technical-details.xml +0
-0@@ -162,7 +163,7 @@ <ulink url='&YOCTO_DOCS_DEV_URL;#cross-development-toolchain'>cross-development toolchains</ulink>.
This section provides some technical background information on how cross-development toolchains are created and used.documentation/ref-manual/technical-details.xml +1
-1- For more information on these toolchain, you can also see the + For more information on toolchains, you can also see the <ulink url='&YOCTO_DOCS_ADT_URL;'>the Yocto Project ApplicationDeveloper's Guide</ulink>.
</para>documentation/ref-manual/technical-details.xml +0
-0@@ -347,7 +348,7 @@ As mentioned in the previous paragraph, building from scratch ensuresthat
everything is current and starts from a known state. However, building from scratch also takes much longer as it generally
meansdocumentation/ref-manual/technical-details.xml +1
-1- rebuilding things that do not necessarily need rebuilt. + rebuilding things that do not necessarily need to be rebuilt. </para> <para>@@ -355,10 +356,11 @@ The implementation of the shared state code answers the followingquestions that
were fundamental roadblocks within the OpenEmbedded incremental
build support system:
<itemizedlist>
- <listitem>What pieces of the system have changed and what pieces
have not changed?</listitem>
- <listitem>How are changed pieces of software removed and
replaced?</listitem>
- <listitem>How are pre-built components that do not need to be rebuilt
from scratchdocumentation/ref-manual/technical-details.xml +1
-1- used when they are available?</listitem> + <listitem><para>What pieces of the system have changed and whatpieces have
documentation/ref-manual/technical-details.xml +2
-0+ not changed?</para></listitem> + <listitem><para>How are changed pieces of software removed andreplaced?</para></listitem>
+ <listitem><para>How are pre-built components that do not need to be
rebuilt from scratchdocumentation/ref-manual/technical-details.xml +2
-1+ used when they are available?</para></listitem> </itemizedlist> </para>@@ -397,16 +399,16 @@ <para> When determining what parts of the system need to be built, BitBake - uses a per-task basis and does not use a per-recipe basis. + works on a per-task basis rather than a per-recipe basis. You might wonder why using a per-task basis is preferred over a per-recipe basis.
To help explain, consider having the IPK packaging backend enabled
and then switching to DEB.
In this case, <filename>do_install</filename> and
<filename>do_package</filename>documentation/ref-manual/technical-details.xml +1
-1- output are still valid. + outputs are still valid. However, with a per-recipe approach, the build would not include the <filename>.deb</filename> files. Consequently, you would have to invalidate the whole build and rerunit.
documentation/ref-manual/technical-details.xml +2
-2- Rerunning everything is not the best situation. - Also in this case, the core must be "taught" much about specific tasks. + Rerunning everything is not the best solution. + Also, in this case, the core must be "taught" much about specific tasks. This methodology does not scale well and does not allow users to easilyadd new tasks
in layers or as external recipes without touching the packaged-staging
core.</para>documentation/ref-manual/technical-details.xml +0
-0@@ -512,17 +514,18 @@ dependent task hashes can be influenced. Within the BitBake configuration file, we can give BitBake some extrainformation
to help it construct the basehash.documentation/ref-manual/technical-details.xml +2
-2- The following statements effectively result in a list of global variable + The following statement effectively results in a list of + global variable dependency excludes - variables never included in any checksum: <literallayout class='monospaced'> - BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASHBBPATH"
-BB_HASHBASE_WHITELIST+= "DL_DIRSSTATE_DIRTHISDIR FILESEXTRAPATHS"
-BB_HASHBASE_WHITELIST+= "FILE_DIRNAMEHOME LOGNAME SHELL TERM USER"
-BB_HASHBASE_WHITELIST+= "FILESPATH USERNAMESTAGING_DIR_HOSTSTAGING_DIR_TARGET"
+BB_HASHBASE_WHITELIST?= "TMPDIR FILE PATH PWDBB_TASKHASH
BBPATHDL_DIR\
+SSTATE_DIRTHISDIR FILESEXTRAPATHSFILE_DIRNAMEHOME
LOGNAME SHELL TERM \
+ USER FILESPATHSTAGING_DIR_HOSTSTAGING_DIR_TARGETCOREBASEPRSERV_HOST\
+PRSERV_DUMPDIRPRSERV_DUMPFILEPRSERV_LOCKDOWNPARALLEL_MAKE\
+CCACHE_DIREXTERNAL_TOOLCHAINCCACHECCACHE_DISABLELICENSE_PATHSDKPKGSUFFIX"
</literallayout>documentation/ref-manual/technical-details.xml +3
-2- The previous example actually excludes + The previous example excludes <link linkend='var-WORKDIR'><filename>WORKDIR</filename></link> - since it is actually constructed as a path within + since that variable is actually constructed as a path + within <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>,which is on
the whitelist. </para>documentation/ref-manual/technical-details.xml +0
-0@@ -541,7 +544,7 @@ <filename>OE-Core</filename> uses the "OEBasicHash" signaturehandler by default
through this setting in the <filename>bitbake.conf</filename> file:
<literallayout class='monospaced'>documentation/ref-manual/technical-details.xml +1
-1- BB_SIGNATURE_HANDLER ?= "OEBasicHash" + BB_SIGNATURE_HANDLER ?= "OEBasicHash" </literallayout> The "OEBasicHash" <filename>BB_SIGNATURE_HANDLER</filename>is the same as the
"OEBasic" version but adds the task hash to the stamp files.documentation/ref-manual/technical-details.xml +0
-0@@ -550,7 +553,7 @@ change that changes the task hash, automatically causing the task to be run again. This removes the need to bump <link linkend='var-PR'><filename>PR</filename></link>
documentation/ref-manual/technical-details.xml +1
-2- values and changes to Metadata automatically ripple across the build. + values, and changes to Metadata automatically ripple across the build. </para> <para>@@ -558,10 +561,10 @@ make some dependency and hash information available to the build. This information includes: <literallayout class='monospaced'> - BB_BASEHASH_task-<taskname> - the base hashes for each task in therecipe
- BB_BASEHASH_<filename:taskname> - the base hashes for each dependent task
- BBHASHDEPS_<filename:taskname> - The task dependencies for each taskdocumentation/ref-manual/technical-details.xml +1
-1- BB_TASKHASH - the hash of the currently running task + BB_BASEHASH_task-<taskname> - the base hashes for each task inthe recipe
+ BB_BASEHASH_<filename:taskname> - the base hashes for each
dependent task
+ BBHASHDEPS_<filename:taskname> - The task dependencies for
each taskdocumentation/ref-manual/technical-details.xml +1
-0+ BB_TASKHASH - the hash of the currently running task </literallayout> </para> </section>@@ -571,7 +574,7 @@ <para> Checksums and dependencies, as discussed in the previous section,solve half the
documentation/ref-manual/technical-details.xml +1
-1- problem. + problem of supporting a shared state. The other part of the problem is being able to use checksuminformation during the build
and being able to reuse or rebuild specific components.
</para>documentation/ref-manual/technical-details.xml +0
-0@@ -581,7 +584,7 @@ is a relatively generic implementation of how to "capture" a snapshot ofa given task.
The idea is that the build process does not care about the source of a
task's output.
Output could be freshly built or it could be downloaded and unpacked
from
- somewhere - the build process does not need to worry about its
source.
+ somewhere - the build process does not need to worry about its
origin.</para> <para>documentation/ref-manual/technical-details.xml +0
-0@@ -598,7 +601,7 @@ <filename>sstate.bbclass</filename>. From a user's perspective, adding shared state wrapping to a task is as simple as this <filename>do_deploy</filename> example takenfrom
documentation/ref-manual/technical-details.xml +2
-2- <filename>do_deploy.bbclass</filename>: + <filename>deploy.bbclass</filename>: <literallayout class='monospaced'> DEPLOYDIR = "${WORKDIR}/deploy-${PN}" SSTATETASKS += "do_deploy"@@ -610,8 +613,9 @@ sstate_setscene(d) } addtask do_deploy_setscene + do_deploy[dirs] = "${DEPLOYDIR} ${B}" </literallayout> - In the example, we add some extra flags to the task, a name field("deploy"), an
+ In this example, we add some extra flags to the task, a
+ name field ("deploy"), an
input directory where the task sends data, and the output directory where the data from the task should eventually be copied. We also add a <filename>_setscene</filename> variant of the task and
add the task @@ -752,7 +756,7 @@
To avoid these problems during the build, you need to understand
the effects of any
change you make.
Note that any changes you make directly to a function automatically
are factored into
- the checksum calculation and thus, will invalidate the associated area
of sstate cache.
+ the checksum calculation and thus will invalidate the associated area
of sstate cache.
You need to be aware of any implicit changes that are not obvious
changes to the
code and could affect the output of a given task.
Once you are aware of such changes, you can take steps to invalidate
the cache @@ -868,7 +872,7 @@<para> <ulinkurl='http://en.wikipedia.org/wiki/Wayland_(display_server_protocol)#Westo n'>Wayland</ulink>
documentation/ref-manual/technical-details.xml +4
-3- is a computer display server protocol that when implemented + is a computer display server protocol that provides a method for compositing window managers to communicate directly with applications and video hardware and expects them to communicate with input hardware using other libraries.@@ -879,7 +883,7 @@ <para> The Yocto Project provides the Wayland protocol libraries and the - reference Weston compositor as part of it release. + reference Weston compositor as part of its release. This section describes what you need to do to implement Wayland and use the compositor when building an image for a supporting target. </para>@@ -974,7 +978,7 @@ <para> Alternatively, you can run Weston through the command-line interpretor (CLI), which is better suited for development work. - To run Weston under the CLI you need to do the following after + To run Weston under the CLI, you need to do the following + after your image is built: <orderedlist> <listitem><para>Run these commands to export @@ -1163,7 +1167,7@@
</literallayout>
As a convenience, you do not need to specify the complete
license string
in the whitelist for every package.documentation/ref-manual/technical-details.xml +1
-1- you can use an abbreviated form, which consists + You can use an abbreviated form, which consistsof just the first portion or portions of the license string before the initial underscore character or characters.
A partial string will match @@ -1185,10 +1189,10 @@
License flag matching allows you to control what recipes
the
OpenEmbedded build system includes in the build. Fundamentally, the build system attempts to matchdocumentation/ref-manual/technical-details.xml +4
-4- <filename>LICENSE_FLAG</filename> strings found in + <filename>LICENSE_FLAGS</filename> strings found in recipes against <filename>LICENSE_FLAGS_WHITELIST</filename> strings found in the whitelist. - A match, causes the build system to include a recipe in the + A match causes the build system to include a recipe in + the build, while failure to find a match causes the build system to exclude a recipe. </para>@@ -1249,7 +1253,7 @@ <para> This scheme works even if the - <filename>LICENSE_FLAG</filename> string already + <filename>LICENSE_FLAGS</filename> string already has <filename>_${PN}</filename> appended. For example, the build system turns the license flag "commercial_1.2_foo" into "commercial_1.2_foo_foo" and would --===========================================================
=============
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday===========================================================
=============
Quoted 1 line · Scott M
Patch applied.
um ... you *are* sanity-checking this stuff first, right? :-)
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================