Skip to contentSkip to conversation

SFI for Linux

GIT PULL Len Brown 1 participant 1 message Sep 19, 2009

lore
Share & tools
lore

Len Brown

author
#0 lore raw

Hi Linus,

please pull from:

git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git sfi-release

This tree supports the Simple Firmware Interface for Linux
http://simplefirmware.org/ which is required in order to boot Linux on Intel's upcoming Moorestown platform.

The x86 maintainers have acked the bits that touch x86, though I didn't re-base the patches to note that because the commits are shared by multiple trees.

Also, if you pull this tree before pulling the ACPI tree, you'll pull along a few preceeding ACPI patches that were necessary to add SFI support.

thanks!

--
Len Brown
Intel Open Source Technology Center

ps. individual patches are available on [email protected] and a consolidated plain patch is available here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/sfi/patches/2.6.31/acpi-sfi-release-20090521-2.6.31.diff.gz

 MAINTAINERS                    |   12 ++
 arch/x86/Kconfig               |    4 +-
 arch/x86/kernel/Makefile       |    1 +
 arch/x86/kernel/setup.c        |    3 +
 arch/x86/kernel/sfi.c          |  122 ++++++++++++
 arch/x86/pci/mmconfig-shared.c |    6 +-
 arch/x86/pci/mmconfig_32.c     |    2 +-
 drivers/Makefile               |    1 +
 drivers/sfi/Kconfig            |   17 ++
 drivers/sfi/Makefile           |    3 +
 drivers/sfi/sfi_acpi.c         |  175 +++++++++++++++++
 drivers/sfi/sfi_core.c         |  407 ++++++++++++++++++++++++++++++++++++++++
 drivers/sfi/sfi_core.h         |   70 +++++++
 include/linux/sfi.h            |  206 ++++++++++++++++++++
 include/linux/sfi_acpi.h       |   93 +++++++++
 init/main.c                    |    2 +
 16 files changed, 1120 insertions(+), 4 deletions(-)
 create mode 100644 arch/x86/kernel/sfi.c
 create mode 100644 drivers/sfi/Kconfig
 create mode 100644 drivers/sfi/Makefile
 create mode 100644 drivers/sfi/sfi_acpi.c
 create mode 100644 drivers/sfi/sfi_core.c
 create mode 100644 drivers/sfi/sfi_core.h
 create mode 100644 include/linux/sfi.h
 create mode 100644 include/linux/sfi_acpi.h

through these commits:

Feng Tang (6):
SFI: create linux/sfi.h
SFI: add platform-independent core support
SFI: add capability to parse ACPI tables
x86: add arch-specific SFI support
SFI: Hook PCI MMCONFIG
SFI: remove unneeded includes

Len Brown (1):
SFI: Simple Firmware Interface - MAINTAINERS, Kconfig

Thomas Gleixner (1):
sfi: Remove unused code

with this log:

commit c602c65b2f81d14456771d1e3f15d1381f4b7efa
Merge: 3834f47 78f28b7
Author: Len Brown <[email protected]>
Date: Sat Sep 19 00:11:26 2009 -0400

Merge branch 'linus' into sfi-release

Conflicts:
arch/x86/kernel/setup.c
drivers/acpi/power.c
init/main.c

commit 3834f47291df475be3f0f0fb7ccaa098967cc054

Author: Feng Tang <[email protected]>
Date:   Mon Sep 14 13:01:53 2009 +0800

SFI: remove unneeded includes

commit 8079ce34f2c3f5bfedcea8d4fb7290ce46ac5b56

Author: Thomas Gleixner <[email protected]>
Date:   Mon Aug 31 16:49:19 2009 +0200

sfi: Remove unused code

commit 5f0db7a2fb78895a197f64e548333b3bbd433996

Author: Feng Tang <[email protected]>
Date:   Fri Aug 14 15:37:50 2009 -0400

SFI: Hook PCI MMCONFIG

First check ACPI, and if that fails, ask SFI to find the MCFG.

commit efafc8b213e67ed148a5b53ade29ee7b48af907d

Author: Feng Tang <[email protected]>
Date:   Fri Aug 14 15:23:29 2009 -0400

x86: add arch-specific SFI support

arch/x86/kernel/sfi.c serves the dual-purpose of supporting the SFI core with arch specific code, as well as a home for the arch-specific code that uses SFI.

analogous to ACPI, drivers/sfi/Kconfig is pulled in by arch/x86/Kconfig

commit 13e82d023c4c3f13ab1e665cbb917a7ebba8935c

Author: Feng Tang <[email protected]>
Date:   Fri Aug 14 15:17:53 2009 -0400

SFI: add capability to parse ACPI tables

Extend SFI to access standard ACPI tables. (eg. the PCI MCFG) using sfi_acpi_table_parse().

Note that this is _not_ a hybrid ACPI + SFI mode. The platform boots in either ACPI mode or SFI mode.

SFI runs only with acpi_disabled=1, which can be set at build-time via CONFIG_ACPI=n, or at boot time by the failure to find ACPI platform support.

So this extension simply allows SFI-platforms to re-use existing standard table formats that happen to be defined to live in ACPI envelopes.

commit 6ae6996a466e14bcf41618cde641a74ae03dc285

Author: Feng Tang <[email protected]>
Date:   Fri Aug 14 15:13:46 2009 -0400

SFI: add platform-independent core support

drivers/sfi/sfi_core.c contains the generic SFI implementation. It has a private header, sfi_core.h, for its own use and the private use of future files in drivers/sfi/

commit 117a9ac777f8034d4675b821172d2ff71f6ec47a

Author: Feng Tang <[email protected]>
Date:   Fri Aug 14 15:10:24 2009 -0400

SFI: create linux/sfi.h

include/linux/include/sfi.h defines everything that customers of SFI need to know in order to use the SFI suport in the kernel.

The primary API is sfi_table_parse(), where a driver or another part of the kernel can supply a handler to parse the named table.

sfi.h also includes the currently defined table signatures and table formats.

commit 6349d9979beba240fe7182872cb547250264b865

Author: Len Brown <[email protected]>
Date:   Fri Aug 14 15:07:14 2009 -0400

SFI: Simple Firmware Interface - MAINTAINERS, Kconfig

CONFIG_SFI=y enables the kernel to boot and run optimally on platforms that support the Simple Firmware Interface.

Thanks to Jacob Pan for prototyping the initial Linux SFI support, and to Feng Tang for Linux bring-up and debug both in emulation and on Moorestown hardware.

See http://simplefirmware.org for more information on SFI.