[2.6.35] MFD pull request
Hi Linus,
This is the MFD pull request for the 2.6.35 merge window.
We have a bunch of new drivers: RDC R-321x southbridge, Janz MODULbus, ST-E AB3550 and AB8500, Toshiba TC35892 and TI TPS6507. We also have a pcf50633 cleanup, an ABx500 redesign, our usual Wolfson fixes and more Timberdale subdevices.
Thanks in advance for pulling:
The following changes since commit c5617b200ac52e35f7e8cf05a17b0a2d50f6b3e9:
Linus Torvalds (1):
Merge branch 'perf-core-for-linus' of git://git.kernel.org/.../tip/linux-2.6-tip
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git for-next
Dan Carpenter (2):
mfd: Off by one calculating size for timberdale
mfd: Proper pcf50633 irq check
Florian Fainelli (6):
mfd: Add support for the RDC321x southbridge
gpio: Add support for RDC321x GPIO controller
watchdog: Convert rdc321x_wdt to use southbridge pci device
x86: remove rdc321x_defs.h
mfd: Change rdc321x resources flags to IORESOURCE_IO
gpio: Fix inverted rdc321x gpio data out registers
Haojian Zhuang (1):
mfd: Delay to mask tsc irq in max8925
Henrik Kretzschmar (1):
mfd: Section cleanup of 88pm860x driver
Ilkka Koskinen (1):
mfd: Rename twl5031 sih modules
Ira W. Snyder (3):
mfd: Janz CMOD-IO PCI MODULbus Carrier Board support
can: Add support for Janz VMOD-ICAN3 Intelligent CAN module
gpio: Add support for Janz VMOD-TTL Digital IO module
Lars-Peter Clausen (4):
mfd: Fix pcf50633 bitfield logic in interrupt handler
mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read
mfd: Use threaded irq for pcf50633
mfd: Move pcf50633 irq related functions to its own file.
Linus Walleij (1):
mfd: Renamed ab3100.h to abx500.h
Mark Brown (4):
mfd: Remove unused wm831x IRQ handler data
mfd: Improve WM831x AUXADC completion handling
mfd: Initialise WM831x IRQ masks on chip even if interrupts not in use
mfd: Ensure WM831x charger interrupts are acknowledged when suspending
Mattias Wallin (3):
mfd: AB3100 register access change to abx500 API
mfd: AB3550 core driver
ARM: AB3550 board configuration and irq for U300
Phil Carmody (1):
mfd: Fix error in wm8400 reg cache access check
Rabin Vincent (4):
mfd: Remove incorrect wm8350 kfree
mfd: Add Toshiba's TC35892 MFD core
gpio: Add TC35892 GPIO driver
mfd: New AB8500 driver
Randy Dunlap (2):
mfd: Use menuconfig for quicker config editing
gpio: rdc321x needs to select MFD_CORE
Richard Röjfors (2):
mfd: Add in XIIC to some configurations of timberdale
mfd: Add timb-dma to all configurations of timberdale
Samuel Ortiz (2):
mfd: Check t7l66 platform_data pointer
mfd: Check for mem_base when building IORESOURCE_MEM resources
Tejun Heo (1):
gpio: Update gfp/slab.h includes for rdc321x
Tobias Klauser (1):
mfd: Storage class for timberdale should be before const qualifier
Todd Fischer (6):
mfd: Move TPS6507x register definition to header file.
mfd: Add tps6507x board data structure
regulator: tps6057x namespace cleanup
mfd: Add TPS6507x support
input: Touchscreen driver for TPS6507x
davinci: da850 TPS6507x touch screen driver board data
Wolfram Sang (2):
mfd: Fix dangling pointers
mfd: Remove unneeded and dangerous clearing of clientdata
arch/arm/mach-davinci/board-da850-evm.c | 19 +- arch/arm/mach-u300/i2c.c | 57 +- arch/arm/mach-u300/include/mach/irqs.h | 7 + arch/arm/mach-ux500/board-mop500.c | 2 +- arch/x86/include/asm/rdc321x_defs.h | 12 - drivers/gpio/Kconfig | 26 + drivers/gpio/Makefile | 5 +- drivers/gpio/janz-ttl.c | 258 +++++ drivers/gpio/rdc321x-gpio.c | 246 +++++ drivers/gpio/tc35892-gpio.c | 381 +++++++ drivers/input/touchscreen/Kconfig | 13 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/tps6507x-ts.c | 400 +++++++ drivers/mfd/88pm860x-core.c | 6 +- drivers/mfd/88pm860x-i2c.c | 2 +- drivers/mfd/Kconfig | 87 ++- drivers/mfd/Makefile | 13 +- drivers/mfd/ab3100-core.c | 99 ++- drivers/mfd/ab3100-otp.c | 13 +- drivers/mfd/ab3550-core.c | 1401 +++++++++++++++++++++++ drivers/mfd/ab4500-core.c | 209 ---- drivers/mfd/ab8500-core.c | 444 ++++++++ drivers/mfd/ab8500-spi.c | 133 +++ drivers/mfd/abx500-core.c | 157 +++ drivers/mfd/da903x.c | 1 + drivers/mfd/janz-cmodio.c | 304 +++++ drivers/mfd/max8925-core.c | 7 +- drivers/mfd/max8925-i2c.c | 2 - drivers/mfd/menelaus.c | 3 +- drivers/mfd/mfd-core.c | 2 +- drivers/mfd/pcf50633-adc.c | 39 +- drivers/mfd/pcf50633-core.c | 345 +------ drivers/mfd/pcf50633-irq.c | 318 ++++++ drivers/mfd/rdc321x-southbridge.c | 123 +++ drivers/mfd/t7l66xb.c | 3 + drivers/mfd/tc35892.c | 347 ++++++ drivers/mfd/timberdale.c | 156 +++- drivers/mfd/timberdale.h | 16 +- drivers/mfd/tps65010.c | 2 +- drivers/mfd/tps6507x.c | 159 +++ drivers/mfd/twl4030-irq.c | 11 +- drivers/mfd/wm831x-core.c | 112 ++- drivers/mfd/wm831x-irq.c | 18 +- drivers/mfd/wm8350-i2c.c | 6 +- drivers/mfd/wm8400-core.c | 4 +- drivers/net/can/Kconfig | 10 + drivers/net/can/Makefile | 1 + drivers/net/can/janz-ican3.c | 1830 +++++++++++++++++++++++++++++++ drivers/regulator/ab3100.c | 35 +- drivers/regulator/tps6507x-regulator.c | 373 +++---- drivers/rtc/rtc-ab3100.c | 41 +- drivers/watchdog/rdc321x_wdt.c | 53 +- include/linux/input/tps6507x-ts.h | 24 + include/linux/mfd/88pm860x.h | 4 +- include/linux/mfd/ab3100.h | 129 --- include/linux/mfd/ab4500.h | 262 ----- include/linux/mfd/ab8500.h | 128 +++ include/linux/mfd/abx500.h | 233 ++++ include/linux/mfd/janz.h | 54 + include/linux/mfd/rdc321x.h | 26 + include/linux/mfd/tc35892.h | 132 +++ include/linux/mfd/tps6507x.h | 169 +++ include/linux/mfd/wm831x/core.h | 5 +- 63 files changed, 8113 insertions(+), 1365 deletions(-) delete mode 100644 arch/x86/include/asm/rdc321x_defs.h create mode 100644 drivers/gpio/janz-ttl.c create mode 100644 drivers/gpio/rdc321x-gpio.c create mode 100644 drivers/gpio/tc35892-gpio.c create mode 100644 drivers/input/touchscreen/tps6507x-ts.c create mode 100644 drivers/mfd/ab3550-core.c delete mode 100644 drivers/mfd/ab4500-core.c create mode 100644 drivers/mfd/ab8500-core.c create mode 100644 drivers/mfd/ab8500-spi.c create mode 100644 drivers/mfd/abx500-core.c create mode 100644 drivers/mfd/janz-cmodio.c create mode 100644 drivers/mfd/pcf50633-irq.c create mode 100644 drivers/mfd/rdc321x-southbridge.c create mode 100644 drivers/mfd/tc35892.c create mode 100644 drivers/mfd/tps6507x.c create mode 100644 drivers/net/can/janz-ican3.c create mode 100644 include/linux/input/tps6507x-ts.h delete mode 100644 include/linux/mfd/ab3100.h delete mode 100644 include/linux/mfd/ab4500.h create mode 100644 include/linux/mfd/ab8500.h create mode 100644 include/linux/mfd/abx500.h create mode 100644 include/linux/mfd/janz.h create mode 100644 include/linux/mfd/rdc321x.h create mode 100644 include/linux/mfd/tc35892.h create mode 100644 include/linux/mfd/tps6507x.h
Signature · 2 lines
Intel Open Source Technology Centre http://oss.intel.com/
Quoted 2 lines · Samuel Ortiz
This is the MFD pull request for the 2.6.35 merge window.
Samuel - this adds the CONFIG_MFD thing, with absolutely _no_ explanation. So now people see this totally incomprehensible question:
Enable Multifunction device drivers? (Y/n)
with no sane way to decide whether they should actually enable it or not.
I'm ok with it being 'y' default, since it's a whole new config option that enables pre-existing config options, but _dammit_ people, you need to think way more about the Kconfig options you add!
"MFD" isn't even a well-defined term. A lot of people think about printers when they hear it. So you really _really_ need to explain what the h*ll you are asking people!
Linus