couple simple questions on building for intel galileo
just got an intel galileo board, and want to whip together a
yocto-built image for it on my fedora rawhide system. before even starting, a quick google showed me that people seemed to be having trouble:
https://communities.intel.com/thread/51115
where are the canonical instructions for building a basic image for the galileo with yocto? i found this:
http://wiki.ros.org/IntelGalileo/HydroGalileoInitialInstall
but i'd like to make sure i'm using the most current instructions to avoid problems. thanks.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Robert,
Here is some instructions with some workarounds:
http://www.malinov.com/Home/sergey-s-blog/intelgalileo-buildinglinuximage
And I think that you already saw meta-intel-iot-devkit:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-iot-devkit/
As soon as I get my Galileo I'll try to put Yocto on it.
Please, share your results with us.
Regards,
--
*dS
Diego Sueiro
Administrador do Embarcados www.embarcados.com.br<http://www.embarcados.com.br/?utm_source=assinatura_diego&utm_medium=e-mail&utm_campaign=Assinatura%20Email%20Diego>
/*long live rock 'n roll*/
Quoted 33 lines · Robert P. J. Day
just got an intel galileo board, and want to whip together a
yocto-built image for it on my fedora rawhide system. before even starting, a quick google showed me that people seemed to be having trouble:https://communities.intel.com/thread/51115
where are the canonical instructions for building a basic image for the galileo with yocto? i found this:
http://wiki.ros.org/IntelGalileo/HydroGalileoInitialInstall
but i'd like to make sure i'm using the most current instructions to avoid problems. thanks.
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday========================================================================
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 10 lines · Diego Sueiro
Robert,
Here is some instructions with some workarounds:
http://www.malinov.com/Home/sergey-s-blog/intelgalileo-buildinglinuximageAnd I think that you already saw meta-intel-iot-devkit:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-iot-devkit/As soon as I get my Galileo I'll try to put Yocto on it.
Please, share your results with us.
oh, i'm currently writing all this up and, at the risk of going
*slightly* off-topic, before i set up for a yocto build for this board, i'm just trying to clarify the boot process, both without and with the SD card, so i know i'm bulding my SD card properly.
first, without an SD card, the board apparently boots a minimal
linux image from SPI flash. so far, so good.
as for creating a bootable SD card, i see two possibilities. the
first is explained at sparkfun:
https://learn.sparkfun.com/tutorials/galileo-getting-started-guide/bigger-linux-image
where one can download a file called LINUX_IMAGE_FOR_SD_Intel_Galileo_v0.7.5.7z, which uncompresses into a simple directory structure that you copy to a FAT-formatted SD card. so this SD card, apparently, contains a single FAT partition.
on the other hand, over at intel's developer zone:
https://software.intel.com/en-us/iotdevkit
one can download what is described as "SD card (200MB zipped)", which i unzipped into a file "iot-devkit-201402201605-mmcblkp0.direct", almost 8G in size, and which "fdisk" shows me has the following structure:
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos
Disk identifier: 0x0007eabb
Device Boot Start End
Blocks Id System
iot-devkit-201402201605-mmcblkp0.direct1 * 2048 106493 52223 83 Linux
iot-devkit-201402201605-mmcblkp0.direct2 106496 14442495 7168000 83 Linux
which is more what i'm used to. so am i reading both of these
correctly? there are two possible formats for the bootable SD card:
* simple, single FAT partition, or
* more "standard" pair of bootable FAT partition, and linux ext partition.
many thanks.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 6 lines · Diego Sueiro
Robert,
Here is some instructions with some workarounds:
http://www.malinov.com/Home/sergey-s-blog/intelgalileo-buildinglinuximageAnd I think that you already saw meta-intel-iot-devkit:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-iot-devkit/
at the moment, i am at my wit's end trying to build a simple
bootable SD card for the galileo, and since i need one of those to boot my eventual yocto build, i figure this is at least remotely on topic.
what is the proper and acceptable format for a bootable SD card for
the galileo, and how does one boot from it? i have read *numerous* online recipes, all of which differ subtlely but maddeningly from one another. there is an alleged linux image file one can download:
LINUX_IMAGE_FOR_SD_Intel_Galileo_v0.7.5.7z
which uncompresses and unloads into the following:
./core-image-minimal-initramfs-clanton.cpio.gz
./bzImage
./image-full-clanton.ext3
./boot
./boot/grub./boot/grub/grub.conf
but how one "installs" that on an SD card that is bootable by a galileo board is a mystery i have yet to fathom, and various recipes online differ in what they think is required:
* some recipes insist the filesystem must be FAT or FAT16, while others claim FAT or FAT32
* one recipe will claim that the partition must be bootable, another insists it works without that
* some recipes explain that the SD card should contain one partition (as in, you know, /dev/sdc1), while another recipe *appears* to claim that you need to format the *raw* SD card as a FAT partition
i have tried various incantations of fdisk and mkfs and so on, to
the point where i am quite prepared to toss this board out a second story window.
can anyone point me at a set of instructions that will give me a
bootable SD card for this board?
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Hi Rob,
Have you seen the Quark BSP Build Guide?
Regards,
Rob
Quoted 68 lines · Robert P. J. Day
Quoted 3 lines · Diego Sueiro
Robert,
Here is some instructions with some workarounds:http://www.malinov.com/Home/sergey-s-blog/intelgalileo-buildinglinuximage
Quoted 3 lines
And I think that you already saw meta-intel-iot-devkit:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-iot-devkit/at the moment, i am at my wit's end trying to build a simple
bootable SD card for the galileo, and since i need one of those to boot my eventual yocto build, i figure this is at least remotely on topic.what is the proper and acceptable format for a bootable SD card for
the galileo, and how does one boot from it? i have read *numerous* online recipes, all of which differ subtlely but maddeningly from one another. there is an alleged linux image file one can download:LINUX_IMAGE_FOR_SD_Intel_Galileo_v0.7.5.7z
which uncompresses and unloads into the following:
./core-image-minimal-initramfs-clanton.cpio.gz
./bzImage
./image-full-clanton.ext3
./boot
./boot/grub./boot/grub/grub.confbut how one "installs" that on an SD card that is bootable by a galileo board is a mystery i have yet to fathom, and various recipes online differ in what they think is required:
* some recipes insist the filesystem must be FAT or FAT16, while others claim FAT or FAT32
* one recipe will claim that the partition must be bootable, another insists it works without that
* some recipes explain that the SD card should contain one partition (as in, you know,/dev/sdc1), while another recipe *appears* to claim that you need to format the *raw* SD card as a FAT partitioni have tried various incantations of fdisk and mkfs and so on, to
the point where i am quite prepared to toss this board out a second story window.can anyone point me at a set of instructions that will give me a
bootable SD card for this board?rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday========================================================================
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 4 lines · Rob Woolley
Hi Rob,
Have you seen the Quark BSP Build Guide?
already on my reading/testing list, but i'm still reluctant to jump
over this issue and move on to more advanced stuff. for the purpose of process, i want to clarify how to boot this board off of simple SD card, and i have yet to figure that out. grrrrrrrr ...
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 4 lines · Rob Woolley
Hi Rob,
Have you seen the Quark BSP Build Guide?
i believe there is a much newer release of that doc here:
in my travels around the intertoobz, a few people made it clear they weren't impressed with the 0.7.5 release, so a newer release is definitely a good thing.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================