max PWM is zero
Hi lkml,
I'm using the kernel 3.2-rc1 and I'm getting the following message in my dmesg:
fixme: max PWM is zero.
I don't remember if this message was here before...
I'm trying to verify what is causing this. I found this waring message in the drivers/gpu/drm/i915/intel_panel.c.
There is a comment above this message, talking about put a code to query mode clock or hw clock to set the max PWM.
Bellow is my lspci.
I will be happy if you continue to cc me, and if you need any test, I'm able to do this.
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f8000000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 3
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0
Memory at f8400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1820 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1840 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f8704000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at f8700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f8704400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Capabilities: [50] Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 18f8 [size=8] I/O ports at 180c [size=4] I/O ports at 18f0 [size=8] I/O ports at 1808 [size=4] I/O ports at 18e0 [size=16] I/O ports at 1810 [size=16] Capabilities: [70] Power Management version 3 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: medium devsel, IRQ 19
Memory at c0000000 (64-bit, non-prefetchable) [size=256] I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 1c50 [size=8] I/O ports at 1c44 [size=4] I/O ports at 1c48 [size=8] I/O ports at 1c40 [size=4] I/O ports at 1c30 [size=16] I/O ports at 1c20 [size=16] Capabilities: [70] Power Management version 3 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ata_piix
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at 3000 [size=256]
Memory at f6000000 (64-bit, non-prefetchable) [size=4K]
Memory at f2000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f2020000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 71-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
* Uma vida sem desafios é uma vida sem razão *
* A life without challanges is a non reason life *
So, anybody gets the same message?
I'm trying the 3.2-rc2 and it gives the same message.
Again, if you need someone to make tests, or test some patches, I'm able to do this.
* Uma vida sem desafios é uma vida sem razão *
* A life without challanges is a non reason life *
Quoted 209 lines · Marcos Paulo de Souza
Hi lkml,
I'm using the kernel 3.2-rc1 and I'm getting the following message in my dmesg:
fixme: max PWM is zero.I don't remember if this message was here before...
I'm trying to verify what is causing this. I found this waring message in the
drivers/gpu/drm/i915/intel_panel.c.There is a comment above this message, talking about put a code to query mode clock or hw clock to set the max PWM.
Bellow is my lspci.
I will be happy if you continue to cc me, and if you need any test, I'm able to do this.
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory atf8000000(64-bit, non-prefetchable) [size=4M]
Memory atd0000000(64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 3
Kernel driver in use: i915
Kernel modules: i91500:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0
Memory atf8400000(64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 300:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1820 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use:uhci_hcd00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1840 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use:uhci_hcd00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use:uhci_hcd00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory atf8704000(32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use:ehci_hcd00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory atf8700000(64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use:snd_hda_intel
Kernel modules: snd-hda-intel00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4000000-f5ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID)Device 0000
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link Kernel driver in use: pcieport
Kernel modules: shpchp00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID)Device 0000
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link Kernel driver in use: pcieport
Kernel modules: shpchp00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use:uhci_hcd00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use:uhci_hcd00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use:uhci_hcd00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory atf8704400(32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use:ehci_hcd00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Capabilities: [50] Subsystem: FIRST INTERNATIONAL Computer Inc Device
300900:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules:iTCO_wdt00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 18f8 [size=8] I/O ports at 180c [size=4] I/O ports at 18f0 [size=8] I/O ports at 1808 [size=4] I/O ports at 18e0 [size=16] I/O ports at 1810 [size=16] Capabilities: [70] Power Management version 3 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ata_piix00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: medium devsel, IRQ 19
Memory atc0000000(64-bit, non-prefetchable) [size=256] I/O ports at 1c00 [size=32]
Kernel driver in use:i801_smbus
Kernel modules: i2c-i80100:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 1c50 [size=8] I/O ports at 1c44 [size=4] I/O ports at 1c48 [size=8] I/O ports at 1c40 [size=4] I/O ports at 1c30 [size=16] I/O ports at 1c20 [size=16] Capabilities: [70] Power Management version 3 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ata_piix04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at 3000 [size=256]
Memory atf6000000(64-bit, non-prefetchable) [size=4K]
Memory atf2000000(64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM atf2020000[disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 71-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
Quoted 2 lines
* Uma vida sem desafios é uma vida sem razão *
* A life without challanges is a non reason life *
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 6 lines · Marcos Paulo de Souza
So, anybody gets the same message?
I'm trying the 3.2-rc2 and it gives the same message.
Again, if you need someone to make tests, or test some patches, I'm able to do this.
Is your machine even using the intel backlight device? You can test this by:
# cd /sys/class/backlight/intel_backlight
Then look at 'max_brightness' and try echoing a range of numbers from 0 to max_brightness into the brightness file and see if it changes the backlight.
It's more than possible that your machine is simply using some other hardware to drive the backlight and that the integrated backlight controller is simply disabled.
Signature · 1 line
[email protected]
Hi Keith,
Quoted 8 lines · Keith Packard
Quoted 6 lines · Marcos Paulo de Souza
So, anybody gets the same message?
I'm trying the 3.2-rc2 and it gives the same message.
Again, if you need someone to make tests, or test some patches, I'm able to do this.
Quoted 8 lines
Is your machine even using the intel backlight device? You can test this by:
# cd /sys/class/backlight/intel_backlightThen look at '
max_brightness' and try echoing a range of numbers from 0 tomax_brightnessinto the brightness file and see if it changes the backlight.
My max_brightness is 1, and my brightness is 0. But, my acpi_video0 have a max_brightness value = 9...
Quoted 3 lines
It's more than possible that your machine is simply using some other hardware to drive the backlight and that the integrated backlight controller is simply disabled.
So, what can I do to silence this warning...? Change the driver of backlight?
Quoted 3 lines
Signature · 1 line
[email protected]
Quoted 1 line · Marcos Paulo de Souza
My
max_brightnessis 1, and my brightness is 0.
Right, we've prevented the internal backlight driver from exposing a max value of 0 as that's just confusing.
Quoted 2 lines
But, my
acpi_video0have amax_brightnessvalue = 9...
Right, sounds like your device is just using some other backlight controller, which is perfectly reasonable.
Quoted 2 lines
So, what can I do to silence this warning...? Change the driver of backlight?
If your backlight keys work correctly, then things are fine and perhaps we should just remove the warning from the driver, or disable the internal driver when we discover this situation.
This is the first time I've heard of this warning appearing...
Signature · 1 line
[email protected]
Quoted 13 lines · Keith Packard
Quoted 1 line · Marcos Paulo de Souza
My
max_brightnessis 1, and my brightness is 0.Right, we've prevented the internal backlight driver from exposing a max value of 0 as that's just confusing.
Quoted 2 lines
But, my
acpi_video0have amax_brightnessvalue = 9...Right, sounds like your device is just using some other backlight controller, which is perfectly reasonable.
Quoted 8 lines
Quoted 2 lines
So, what can I do to silence this warning...? Change the driver of backlight?
If your backlight keys work correctly, then things are fine and perhaps we should just remove the warning from the driver, or disable the internal driver when we discover this situation.
This is the first time I've heard of this warning appearing...
It appears here as well. I think it was since 2.6.39 or 3.0, I'm not sure.
Same card:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device 02bb Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at f6400000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 1800 [size=8] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 3 Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Dell Device 02bb
Flags: bus master, fast devsel, latency 0
Memory at f6100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
My kernel log has:
[drm] Driver supports precise vblank timestamp query. composite sync not supported
fixme: max PWM is zero.
composite sync not supported
Is this "composite sync not supported" related to this issue?
Lucas De Marchi