Increase the max transfer size when mdts is 0
Subsystems (2)
PATCH 1/1 Increase the max transfer size when mdts is 0
From: Sathyavathi M <[email protected]>
This patch address the issue when IO with 128KB from FIO is splitted as two parts, 124KB and 4KB due to max transfer size(127KB).This degrades the device performance.
Signed-off-by Sathyavathi M <sathya.m at samsung.com>
--- drivers/block/nvme-core.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/block/nvme-core.c +2 -0
@@ -2479,6 +2479,8 @@ static int nvme_dev_add(struct nvme_dev *dev)memcpy (dev->firmware_rev, ctrl->fr,sizeof (ctrl->fr));if (ctrl->mdts) dev->max_hw_sectors =1 << (ctrl->mdts + shift -9 ); +else + dev->max_hw_sectors =UINT_MAX ;if ((pdev->vendor ==PCI_VENDOR_ID_INTEL ) && (pdev->device ==0x0953 ) && ctrl->vs[3 ]) {unsigned int max_hw_sectors;
Signature · 1 line
1.9.1
PATCH 1/1 Increase the max transfer size when mdts is 0
Quoted 7 lines · Sathyavathi M
From: Sathyavathi M <sathya.m at samsung.com>
This patch address the issue when IO with 128KB from FIO is splitted as two parts, 124KB and 4KB due to max transfer size(127KB).This degrades the device performance.
Signed-off-by Sathyavathi M <sathya.m at samsung.com>
Acked-by Keith Busch <keith.busch at intel.com>