Skip to contentSkip to conversation

NTSC/ATSC device recommendation

DISCUSSION [email protected] 6 participants 9 messages Sep 8, 2009 – Sep 9, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#1 lore raw
Quoted 7 lines · On Tue, Sep 8, 2009 at 1:45 PM, <[email protected]> wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

Thanks
Richard

Have you looked at the lists in the wiki yet?

http://linuxtv.org/wiki/index.php/ATSC_USB_Devices
http://linuxtv.org/wiki/index.php/ATSC_PCI_Cards
http://linuxtv.org/wiki/index.php/ATSC_PCIe_Cards

Devin

Signature · 7 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#2 lore raw
In reply to [email protected]
Quoted 7 lines · [email protected] wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

Thanks
Richard

I have 2 Hauppauge WinTV-HVR-850 USB sticks in my MythTV box (Ubuntu 8.04). USB is preferable to PCI for all kinds of reasons. I bought mine here: http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031

Note that if you go with this device, you'll need to manually add the firmware to your /lib/firmware directory. You can get the firmware here: http://www.steventoth.net/linux/xc5000/

There are plenty of other supported devices though. When I was doing my research, this page was an extremely useful resource for Linux ATSC hardware: http://www.linuxtv.org/wiki/index.php/ATSC_Devices

-Ben

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#3 lore raw
Quoted 18 lines · Ben Swartzlander
Quoted 8 lines · [email protected] wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

Thanks
Richard

I have 2 Hauppauge WinTV-HVR-850 USB sticks in my MythTV box (Ubuntu 8.04). USB is preferable to PCI for all kinds of reasons. I bought mine here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031

Note that if you go with this device, you'll need to manually add the firmware to your /lib/firmware directory. You can get the firmware here:
http://www.steventoth.net/linux/xc5000/

Quoted 5 lines

There are plenty of other supported devices though. When I was doing my research, this page was an extremely useful resource for Linux ATSC
hardware: http://www.linuxtv.org/wiki/index.php/ATSC_Devices

-Ben

I'm really familiar with the HVR-850, and figured it would be worth mentioning that the HVR-850 only very recently got analog support in the Linux driver, and it has some issues with MythTV in particular (which I haven't had a chance to fix yet). So if you're planning on doing analog with MythTV, that may not be a good device to go with right now.

Cheers,

Devin

Signature · 7 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#4 lore raw
Quoted 23 lines · Devin Heitmueller
Quoted 22 lines · Ben Swartzlander
Quoted 8 lines · [email protected] wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

Thanks
Richard

I have 2 Hauppauge WinTV-HVR-850 USB sticks in my MythTV box (Ubuntu 8.04). USB is preferable to PCI for all kinds of reasons. I bought mine here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031

Note that if you go with this device, you'll need to manually add the firmware to your /lib/firmware directory. You can get the firmware here:
http://www.steventoth.net/linux/xc5000/

There are plenty of other supported devices though. When I was doing my research, this page was an extremely useful resource for Linux ATSC
hardware: http://www.linuxtv.org/wiki/index.php/ATSC_Devices

Quoted 9 lines
Quoted 1 line

-Ben

I'm really familiar with the HVR-850, and figured it would be worth mentioning that the HVR-850 only very recently got analog support in the Linux driver, and it has some issues with MythTV in particular (which I haven't had a chance to fix yet). So if you're planning on doing analog with MythTV, that may not be a good device to go with right now.

Thanks, that is the kind of info I was hoping for
There are still low power analog stations in my area
I would like a device that can reliably receive analog and digital

Richard

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#5 lore raw
Quoted 35 lines · On Tue, 2009-09-08 at 13:29 -0500, [email protected] wrote:
Quoted 23 lines · Devin Heitmueller
Quoted 22 lines · Ben Swartzlander
Quoted 8 lines · [email protected] wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

Thanks
Richard

I have 2 Hauppauge WinTV-HVR-850 USB sticks in my MythTV box (Ubuntu 8.04). USB is preferable to PCI for all kinds of reasons. I bought mine here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031

Note that if you go with this device, you'll need to manually add the firmware to your /lib/firmware directory. You can get the firmware here:
http://www.steventoth.net/linux/xc5000/

There are plenty of other supported devices though. When I was doing my research, this page was an extremely useful resource for Linux ATSC
hardware: http://www.linuxtv.org/wiki/index.php/ATSC_Devices

Quoted 9 lines
Quoted 1 line

-Ben

I'm really familiar with the HVR-850, and figured it would be worth mentioning that the HVR-850 only very recently got analog support in the Linux driver, and it has some issues with MythTV in particular (which I haven't had a chance to fix yet). So if you're planning on doing analog with MythTV, that may not be a good device to go with right now.

Quoted 3 lines

Thanks, that is the kind of info I was hoping for
There are still low power analog stations in my area
I would like a device that can reliably receive analog and digital

The HVR-1600 can do both analog and digital at the same time: Picture in Picture in MythTV. FM radio works too, when you're not watching analog TV. PCI bus. Hardware MPEG encoder.

Regards,
Andy

Quoted 7 lines

Richard

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#6 lore raw
In reply to Ben Swartzlander
Quoted 15 lines · Ben Swartzlander
Quoted 8 lines · [email protected] wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux
MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

Thanks
Richard

I have 2 Hauppauge WinTV-HVR-850 USB sticks in my MythTV box (Ubuntu 8.04). USB is preferable to PCI for all kinds of reasons. I bought mine here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031

Quoted 7 lines

Note that if you go with this device, you'll need to manually add the firmware to your /lib/firmware directory. You can get the firmware
here: http://www.steventoth.net/linux/xc5000/

There are plenty of other supported devices though. When I was doing my research, this page was an extremely useful resource for Linux ATSC
hardware: http://www.linuxtv.org/wiki/index.php/ATSC_Devices

That last comment made me happy to know.

Anyway, please note that this mailing list is pretty much deprecated in favour of the LMML (which I've cc'ed in this reply).

#7 lore raw
In reply to [email protected]
Quoted 4 lines · On Tuesday 08 September 2009, [email protected] wrote:

I would like to purchase a NTSC/ATSC device that is functional under Linux MY only requirement is receiving FTA broadcast
Would y'all recommend a USB device or better to stick with a pci device I have followed this list and have only become more confused

I have been using a 'pcHDTV-3000' card for 3 or so years, works most of the time here, and I'm definitely 'fringe' area for some of the stations I get. One (PBS, my fav) is nearly 70 air miles.

This has been replaced by the 'pcHDTV-5500' card I believe, google for it. Mine is regular pci, the newer one may be pci-e.
Mine also doesn't recognize the broadcast flag, I can't say for the newer one.

Software in linux to support tv in general sucks. You must build the latest kaffeine to get it to sort of work with digital. Because I have more than one sound system here, mythtv has great video but no sound, and as near as I can tell, no facility to make sure its using the right mixer.

tvtime, for NTSC, Just Works(TM) but the author has not to my knowledge, made any motions toward ATSC support. Unforch, here in the states, NTSC is deprecated by FCC edict.

If you get the card, be sure and get the firmware that goes with it, available freely on their site.

Quoted 7 lines

Thanks
Richard

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Signature · 15 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
The NRA is offering FREE Associate memberships to anyone who wants them.
<https://www.nrahq.org/nrabonus/accept-membership.asp>

The more laws and order are made prominent, the more thieves and
robbers there will be.
		-- Lao Tsu

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#8 lore raw
Quoted 4 lines · Gene Heskett

Software in linux to support tv in general sucks.  You must build the latest kaffeine to get it to sort of work with digital.  Because I have more than one sound system here, mythtv has great video but no sound, and as near as I can tell, no facility to make sure its using the right mixer.

With regards to Kaffeine, it depends on your distro. I added support for the ATSC channel scanning over a year ago now, so it has managed to make its way into the distros. And the new Kaffeine that is packaged with Ubuntu Karmic (1.0 pre1) works MUCH better with playback of high-bandwidth ATSC streams such as CBS-HD. So if you are using Kaffeine and get choppy playback on some channels, I would definitely recommend getting the latest version.

Quoted 3 lines

tvtime, for NTSC, Just Works(TM) but the author has not to my knowledge, made any motions toward ATSC support.  Unforch, here in the states, NTSC is deprecated by FCC edict.

It's worth noting that tvtime has no support for digital at all. It is only going to support raw analog video capture devices. Hence, there is no support forthcoming for DVB, ATSC, QAM, or even products that have an onboard MPEG encoder.

Cheers,

Devin

Signature · 7 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list