Skip to contentSkip to conversation

block,scsi: support host-wide tagset

RFC PATCH In review Hannes Reinecke 6 participants 12 messages Apr 4, 2017 – Apr 7, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover block,scsi: support host-wide tagset

Hi all,

as discussed recently most existing HBAs have a host-wide tagset which does not map easily onto the per-queue tagset model of block mq. This patchset implements a flag BLK_MQ_F_GLOBAL_TAGS for block-mq, which enables the use of a shared tagset for all hardware queues. The second patch adds a flag 'host_tagset' to the SCSI host template, which allows drivers to enable the use of the global tagset.

This patchset probably has some performance implications as there is a quite high probability of cache-bouncing when allocating tags. Also I'm not quite sure if the implemented tagset sharing is the correct way to handle things.
So this can be considered an RFC.

As usual, comments and reviews are welcome.

Hannes Reinecke (2):
block: Implement global tagset
scsi: Add template flag 'host_tagset'

 block/blk-mq-tag.c       | 12 ++++++++----
 block/blk-mq.c           | 10 ++++++++--
 drivers/scsi/scsi_lib.c  |  2 ++
 include/linux/blk-mq.h   |  1 +
 include/scsi/scsi_host.h |  5 +++++
 5 files changed, 24 insertions(+), 6 deletions(-)
Signature · 1 line
1.8.5.6
#1 lore raw

PATCH 1/2 block: Implement global tagset

Most legacy HBAs have a tagset per HBA, not per queue. To map these devices onto block-mq this patch implements a new tagset flag BLK_MQ_F_GLOBAL_TAGS, which will cause the tag allocator to use just one tagset for all hardware queues.

---
 block/blk-mq-tag.c     | 12 ++++++++----
 block/blk-mq.c         | 10 ++++++++--
 include/linux/blk-mq.h |  1 +
 3 files changed, 17 insertions(+), 6 deletions(-)
block/blk-mq-tag.c +8 -4
index e48bc2c..a14e76c 100644
@@ -276,9 +276,11 @@ static void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags,
 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 		busy_tag_iter_fn *fn, void *priv)
 {
-	int i;
+	int i, lim = tagset->nr_hw_queues;
 
-	for (i = 0; i < tagset->nr_hw_queues; i++) {
+	if (tagset->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		if (tagset->tags && tagset->tags[i])
 			blk_mq_all_tag_busy_iter(tagset->tags[i], fn, priv);
 	}
@@ -287,12 +289,14 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 
 int blk_mq_reinit_tagset(struct blk_mq_tag_set *set)
 {
-	int i, j, ret = 0;
+	int i, j, ret = 0, lim = set->nr_hw_queues;
 
 	if (!set->ops->reinit_request)
 		goto out;
 
-	for (i = 0; i < set->nr_hw_queues; i++) {
+	if (set->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		struct blk_mq_tags *tags = set->tags[i];
 
 		for (j = 0; j < tags->nr_tags; j++) {
block/blk-mq.c +8 -2
index 159187a..db96ed0 100644
@@ -2061,6 +2061,10 @@ static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx)
 {
 	int ret = 0;
 
+	if ((set->flags & BLK_MQ_F_GLOBAL_TAGS) && hctx_idx != 0) {
+		set->tags[hctx_idx] = set->tags[0];
+		return true;
+	}
 	set->tags[hctx_idx] = blk_mq_alloc_rq_map(set, hctx_idx,
 					set->queue_depth, set->reserved_tags);
 	if (!set->tags[hctx_idx])
@@ -2080,8 +2084,10 @@ static void blk_mq_free_map_and_requests(struct blk_mq_tag_set *set,
 					 unsigned int hctx_idx)
 {
 	if (set->tags[hctx_idx]) {
-		blk_mq_free_rqs(set, set->tags[hctx_idx], hctx_idx);
-		blk_mq_free_rq_map(set->tags[hctx_idx]);
+		if (!(set->flags & BLK_MQ_F_GLOBAL_TAGS) || hctx_idx == 0) {
+			blk_mq_free_rqs(set, set->tags[hctx_idx], hctx_idx);
+			blk_mq_free_rq_map(set->tags[hctx_idx]);
+		}
 		set->tags[hctx_idx] = NULL;
 	}
 }
include/linux/blk-mq.h +1 -0
index b296a90..eee27b016 100644
@@ -155,6 +155,7 @@ enum {
 	BLK_MQ_F_DEFER_ISSUE	= 1 << 4,
 	BLK_MQ_F_BLOCKING	= 1 << 5,
 	BLK_MQ_F_NO_SCHED	= 1 << 6,
+	BLK_MQ_F_GLOBAL_TAGS	= 1 << 7,
 	BLK_MQ_F_ALLOC_POLICY_START_BIT = 8,
 	BLK_MQ_F_ALLOC_POLICY_BITS = 1,
 
Signature · 1 line
1.8.5.6
#2 lore raw

Re: [PATCH 1/2] block: Implement global tagset

Hi Hannes,

Thanks for taking a crack at the issue. My comments below..

Quoted 52 lines · Hannes Reinecke

Most legacy HBAs have a tagset per HBA, not per queue. To map these devices onto block-mq this patch implements a new tagset flag BLK_MQ_F_GLOBAL_TAGS, which will cause the tag allocator to use just one tagset for all hardware queues.

---
 block/blk-mq-tag.c     | 12 ++++++++----
 block/blk-mq.c         | 10 ++++++++--
 include/linux/blk-mq.h |  1 +
 3 files changed, 17 insertions(+), 6 deletions(-)
block/blk-mq-tag.c +8 -4
index e48bc2c..a14e76c 100644
@@ -276,9 +276,11 @@ static void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags,
 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 		busy_tag_iter_fn *fn, void *priv)
 {
-	int i;
+	int i, lim = tagset->nr_hw_queues;
 
-	for (i = 0; i < tagset->nr_hw_queues; i++) {
+	if (tagset->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		if (tagset->tags && tagset->tags[i])
 			blk_mq_all_tag_busy_iter(tagset->tags[i], fn, priv);
 	}
@@ -287,12 +289,14 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 
 int blk_mq_reinit_tagset(struct blk_mq_tag_set *set)
 {
-	int i, j, ret = 0;
+	int i, j, ret = 0, lim = set->nr_hw_queues;
 
 	if (!set->ops->reinit_request)
 		goto out;
 
-	for (i = 0; i < set->nr_hw_queues; i++) {
+	if (set->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		struct blk_mq_tags *tags = set->tags[i];
 
 		for (j = 0; j < tags->nr_tags; j++) {
block/blk-mq.c +0 -0
index 159187a..db96ed0 100644

block/blk-mq.c static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx) · line 2067

Quoted 7 lines
block/blk-mq.c +4 -0
@@ -2061,6 +2061,10 @@ static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx)
 {
 	int ret = 0;
 
+	if ((set->flags & BLK_MQ_F_GLOBAL_TAGS) && hctx_idx != 0) {
+		set->tags[hctx_idx] = set->tags[0];
+		return true;
+	}

So, this effectively make all request allocations to the same NUMA node locality of the hctx_idx 0, correct? Is the performance hit you were talking about in the cover letter?

Do you have any other alternatives in mind? Dynamic growing/shrinking tags/request-pool in hctx with a fixed base as start?

One alternative that comes to my mind is to move the divvy up logic to SCSI (instead of LLD doing it), IOW:

1. Have SCSI set tag_set.queue_depth to can_queue/nr_hw_queues
2. Have blk_mq_unique_tag() (or a new i/f) returning "hwq * nr_hw_queue + rq->tag"

That would make the tags linear in the can_queue space, but could result in poor use of LLD resource if a given hctx has used up all it's tags.

On a related note, would not the current use of can_queue in SCSI lead to poor resource utilization in MQ cases? Like, block layer allocating nr_hw_queues * tags+request+driver_data.etc * can_queue, but SCSI limiting the number of requests to can_queue.

BTW, if you would like me to try out this patch on my setup, please let me know.

Regards,
-Arun

Quoted 29 lines
block/blk-mq.c +4 -2
 	set->tags[hctx_idx] = blk_mq_alloc_rq_map(set, hctx_idx,
 					set->queue_depth, set->reserved_tags);
 	if (!set->tags[hctx_idx])
@@ -2080,8 +2084,10 @@ static void blk_mq_free_map_and_requests(struct blk_mq_tag_set *set,
 					 unsigned int hctx_idx)
 {
 	if (set->tags[hctx_idx]) {
-		blk_mq_free_rqs(set, set->tags[hctx_idx], hctx_idx);
-		blk_mq_free_rq_map(set->tags[hctx_idx]);
+		if (!(set->flags & BLK_MQ_F_GLOBAL_TAGS) || hctx_idx == 0) {
+			blk_mq_free_rqs(set, set->tags[hctx_idx], hctx_idx);
+			blk_mq_free_rq_map(set->tags[hctx_idx]);
+		}
 		set->tags[hctx_idx] = NULL;
 	}
 }
include/linux/blk-mq.h +1 -0
index b296a90..eee27b016 100644
@@ -155,6 +155,7 @@ enum {
 	BLK_MQ_F_DEFER_ISSUE	= 1 << 4,
 	BLK_MQ_F_BLOCKING	= 1 << 5,
 	BLK_MQ_F_NO_SCHED	= 1 << 6,
+	BLK_MQ_F_GLOBAL_TAGS	= 1 << 7,
 	BLK_MQ_F_ALLOC_POLICY_START_BIT = 8,
 	BLK_MQ_F_ALLOC_POLICY_BITS = 1,
 
#3 lore raw

Re: [PATCH 1/2] block: Implement global tagset

Quoted 61 lines · Arun Easi

Hi Hannes,

Thanks for taking a crack at the issue. My comments below..

Quoted 55 lines · Hannes Reinecke

Most legacy HBAs have a tagset per HBA, not per queue. To map these devices onto block-mq this patch implements a new tagset flag BLK_MQ_F_GLOBAL_TAGS, which will cause the tag allocator to use just one tagset for all hardware queues.

---
 block/blk-mq-tag.c     | 12 ++++++++----
 block/blk-mq.c         | 10 ++++++++--
 include/linux/blk-mq.h |  1 +
 3 files changed, 17 insertions(+), 6 deletions(-)
block/blk-mq-tag.c +8 -4
index e48bc2c..a14e76c 100644
@@ -276,9 +276,11 @@ static void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags,
 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 		busy_tag_iter_fn *fn, void *priv)
 {
-	int i;
+	int i, lim = tagset->nr_hw_queues;
 
-	for (i = 0; i < tagset->nr_hw_queues; i++) {
+	if (tagset->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		if (tagset->tags && tagset->tags[i])
 			blk_mq_all_tag_busy_iter(tagset->tags[i], fn, priv);
 	}
@@ -287,12 +289,14 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 
 int blk_mq_reinit_tagset(struct blk_mq_tag_set *set)
 {
-	int i, j, ret = 0;
+	int i, j, ret = 0, lim = set->nr_hw_queues;
 
 	if (!set->ops->reinit_request)
 		goto out;
 
-	for (i = 0; i < set->nr_hw_queues; i++) {
+	if (set->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		struct blk_mq_tags *tags = set->tags[i];
 
 		for (j = 0; j < tags->nr_tags; j++) {
block/blk-mq.c +0 -0
index 159187a..db96ed0 100644
@@ -2061,6 +2061,10 @@ static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx)
 {
 	int ret = 0;
 
Quoted 9 lines

block/blk-mq.c static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx) · line 2067

Quoted 4 lines
block/blk-mq.c +4 -0
+	if ((set->flags & BLK_MQ_F_GLOBAL_TAGS) && hctx_idx != 0) {
+		set->tags[hctx_idx] = set->tags[0];
+		return true;
+	}

So, this effectively make all request allocations to the same NUMA node locality of the hctx_idx 0, correct? Is the performance hit you were talking about in the cover letter?

Yes. It does make the request allocations local to NUMA node 0, but then this will only affect LLDDs which are actually _using_ NUMA locality when allocating the request nodes.
However, SCSI doesn't set a NUMA node locality to begin with, so this doesn't affect us.

No, what I meant is this:
the 'sbitmap' allocator already splits up the bitmap into several words, which then should provide a better NUMA locality per map. When we're using a shared global map it's unclear whether the individual words of the sbitmap can and will be moved to the various NUMA nodes, or whether we suffer from non-locality.

My tests so far have been inconclusive; but then I'm not happy with the testcase anyway (using null_blk I only get 250k/250k r/w IOPs, which I found rather disappointing).

Quoted 6 lines

Do you have any other alternatives in mind? Dynamic growing/shrinking tags/request-pool in hctx with a fixed base as start?

One alternative that comes to my mind is to move the divvy up logic to SCSI (instead of LLD doing it), IOW:

Quoted 7 lines

1. Have SCSI set tag_set.queue_depth to can_queue/nr_hw_queues
2. Have blk_mq_unique_tag() (or a new i/f) returning "hwq * nr_hw_queue + rq->tag"

That would make the tags linear in the can_queue space, but could result in poor use of LLD resource if a given hctx has used up all it's tags.

Exactly. This is the method I used for implementing mq support for lpfc and mpt3sas; however the complaint there indeed was that we might be running into a tag starvation scenario with a large number of LUNs and single-threaded I/O submission.

Quoted 5 lines

On a related note, would not the current use of can_queue in SCSI lead to poor resource utilization in MQ cases? Like, block layer allocating nr_hw_queues * tags+request+driver_data.etc * can_queue, but SCSI limiting the number of requests to can_queue.

Yes, indeed. That's another problem which we should be looking at. However, it's only ever relevant if we indeed implement some divvying logic; if we move to the shared tags approach it should work as designed.

Quoted 3 lines

BTW, if you would like me to try out this patch on my setup, please let me know.

Oh, yes. Please do.

Cheers,

Hannes

Signature · 5 lines
Dr. Hannes Reinecke		               zSeries & Storage
[email protected]			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 N�rnberg
GF: F. Imend�rffer, J. Smithard, D. Upmanyu, G. Norton
HRB 21284 (AG N�rnberg)
#4 lore raw

Re: [PATCH 1/2] block: Implement global tagset

Quoted 62 lines · Hannes Reinecke
Quoted 61 lines · Arun Easi

Hi Hannes,

Thanks for taking a crack at the issue. My comments below..

Quoted 55 lines · Hannes Reinecke

Most legacy HBAs have a tagset per HBA, not per queue. To map these devices onto block-mq this patch implements a new tagset flag BLK_MQ_F_GLOBAL_TAGS, which will cause the tag allocator to use just one tagset for all hardware queues.

---
 block/blk-mq-tag.c     | 12 ++++++++----
 block/blk-mq.c         | 10 ++++++++--
 include/linux/blk-mq.h |  1 +
 3 files changed, 17 insertions(+), 6 deletions(-)
block/blk-mq-tag.c +8 -4
index e48bc2c..a14e76c 100644
@@ -276,9 +276,11 @@ static void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags,
 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 		busy_tag_iter_fn *fn, void *priv)
 {
-	int i;
+	int i, lim = tagset->nr_hw_queues;
 
-	for (i = 0; i < tagset->nr_hw_queues; i++) {
+	if (tagset->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		if (tagset->tags && tagset->tags[i])
 			blk_mq_all_tag_busy_iter(tagset->tags[i], fn, priv);
 	}
@@ -287,12 +289,14 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 
 int blk_mq_reinit_tagset(struct blk_mq_tag_set *set)
 {
-	int i, j, ret = 0;
+	int i, j, ret = 0, lim = set->nr_hw_queues;
 
 	if (!set->ops->reinit_request)
 		goto out;
 
-	for (i = 0; i < set->nr_hw_queues; i++) {
+	if (set->flags & BLK_MQ_F_GLOBAL_TAGS)
+		lim = 1;
+	for (i = 0; i < lim; i++) {
 		struct blk_mq_tags *tags = set->tags[i];
 
 		for (j = 0; j < tags->nr_tags; j++) {
block/blk-mq.c +0 -0
index 159187a..db96ed0 100644
@@ -2061,6 +2061,10 @@ static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx)
 {
 	int ret = 0;
 
Quoted 5 lines
Quoted 5 lines

block/blk-mq.c static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx) · line 2067

Quoted 4 lines
block/blk-mq.c +4 -0
+	if ((set->flags & BLK_MQ_F_GLOBAL_TAGS) && hctx_idx != 0) {
+		set->tags[hctx_idx] = set->tags[0];
+		return true;
+	}

:

Quoted 6 lines
Quoted 4 lines

BTW, if you would like me to try out this patch on my setup, please let me know.

Oh, yes. Please do.

Ran the tests on my setup (Dell R730, 2 Node). This change did not drop any IOPs (got ~2M 512b). The cache miss percentage was varying based on if the tests were running on one node or both (latter yperformed worse). All interrupts were directed to only 1 node. Interestingly, the cache miss percentage was lowest when MQ was off.

I hit a fdisk hang (open path), btw, not sure if it has anything todo with this change, though.

Notes and hang stack attached.

Let me know if you are interested in any specific perf event/command-line.

Regards,
-Arun

perf stat, ran on a short 10 second load.

---1port-1node-new-mq----
Performance counter stats for 'CPU(s) 2':

 188,642,696      LLC-loads                                            (66.66%)
   3,615,142      LLC-load-misses  #    1.92% of all LL-cache hits     (66.67%)
  86,488,341      LLC-stores                                           (33.34%)
  10,820,977      LLC-store-misses                                     (33.33%)
 391,370,104      cache-references                                     (49.99%)
  14,498,491      cache-misses     #    3.705 % of all cache refs      (66.66%)

---1port-1node-mq---
Performance counter stats for 'CPU(s) 2':

 145,025,999      LLC-loads                                            (66.67%)
   3,793,427      LLC-load-misses  #    2.62% of all LL-cache hits     (66.67%)
  60,878,939      LLC-stores                                           (33.33%)
   8,044,714      LLC-store-misses                                     (33.33%)
 294,713,070      cache-references                                     (50.00%)
  11,923,354      cache-misses     #    4.046 % of all cache refs      (66.66%)

---1port-1node-nomq---
Performance counter stats for 'CPU(s) 2':

 157,375,709      LLC-loads                                            (66.66%)
     476,117      LLC-load-misses  #    0.30% of all LL-cache hits     (66.66%)
  76,046,098      LLC-stores                                           (33.34%)
     840,756      LLC-store-misses                                     (33.34%)
 326,230,969      cache-references                                     (50.00%)
   1,332,398      cache-misses     #    0.408 % of all cache refs      (66.67%)

======================

--2port-allnodes-new-mq--
Performance counter stats for 'CPU(s) 2':

  55,455,533      LLC-loads                                            (66.67%)
  37,996,545      LLC-load-misses  #   68.52% of all LL-cache hits     (66.67%)
  14,030,291      LLC-stores                                           (33.33%)
   7,096,931      LLC-store-misses                                     (33.33%)
  76,711,197      cache-references                                     (49.99%)
  45,170,719      cache-misses     #   58.884 % of all cache refs      (66.66%)

--2port-allnodes-mq--
Performance counter stats for 'CPU(s) 2':

  59,303,410      LLC-loads                                            (66.66%)
  31,115,601      LLC-load-misses  #   52.47% of all LL-cache hits     (66.66%)
  17,496,477      LLC-stores                                           (33.34%)
   6,201,373      LLC-store-misses                                     (33.34%)
  89,035,272      cache-references                                     (50.00%)
  37,372,777      cache-misses     #   41.975 % of all cache refs      (66.66%)

--2port-allnodes-nomq--
Performance counter stats for 'CPU(s) 2':

  86,724,905      LLC-loads                                            (66.67%)
  27,154,245      LLC-load-misses  #   31.31% of all LL-cache hits     (66.67%)
  33,710,265      LLC-stores                                           (33.34%)
   6,521,394      LLC-store-misses                                     (33.33%)
 139,089,528      cache-references                                     (50.00%)
  33,682,000      cache-misses     #   24.216 % of all cache refs      (66.66%)
Apr  6 17:34:05 avlnxperf kernel: INFO: task fdisk:27745 blocked for more than 120 seconds.
Apr  6 17:34:05 avlnxperf kernel:      Tainted: G    B      OE   4.11.0-rc4-newblk-ae+ #4
Apr  6 17:34:05 avlnxperf kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Apr  6 17:34:05 avlnxperf kernel: fdisk           D    0 27745  27743 0x00000080
Apr  6 17:34:05 avlnxperf kernel: Call Trace:
Apr  6 17:34:05 avlnxperf kernel: __schedule+0x289/0x8f0
Apr  6 17:34:05 avlnxperf kernel: schedule+0x36/0x80
Apr  6 17:34:05 avlnxperf kernel: schedule_timeout+0x249/0x300
Apr  6 17:34:05 avlnxperf kernel: ? sched_clock_cpu+0x11/0xb0
Apr  6 17:34:05 avlnxperf kernel: ? try_to_wake_up+0x59/0x450
Apr  6 17:34:05 avlnxperf kernel: wait_for_completion+0x121/0x180
Apr  6 17:34:05 avlnxperf kernel: ? wake_up_q+0x80/0x80
Apr  6 17:34:05 avlnxperf kernel: flush_work+0x11d/0x1c0
Apr  6 17:34:05 avlnxperf kernel: ? wake_up_worker+0x30/0x30
Apr  6 17:34:05 avlnxperf kernel: __cancel_work_timer+0x10e/0x1d0
Apr  6 17:34:05 avlnxperf kernel: ? kobj_lookup+0x10d/0x160
Apr  6 17:34:05 avlnxperf kernel: cancel_delayed_work_sync+0x13/0x20
Apr  6 17:34:05 avlnxperf kernel: disk_block_events+0x77/0x80
Apr  6 17:34:05 avlnxperf kernel: __blkdev_get+0x11b/0x4b0
Apr  6 17:34:05 avlnxperf kernel: blkdev_get+0x1c3/0x320
Apr  6 17:34:05 avlnxperf kernel: blkdev_open+0x5b/0x70
Apr  6 17:34:05 avlnxperf kernel: do_dentry_open+0x213/0x330
Apr  6 17:34:05 avlnxperf kernel: ? bd_acquire+0xd0/0xd0
Apr  6 17:34:05 avlnxperf kernel: vfs_open+0x4f/0x70
Apr  6 17:34:05 avlnxperf kernel: ? may_open+0x9b/0x100
Apr  6 17:34:05 avlnxperf kernel: path_openat+0x557/0x13c0
Apr  6 17:34:05 avlnxperf kernel: ? generic_file_read_iter+0x746/0x8c0
Apr  6 17:34:05 avlnxperf kernel: ? scsi_bios_ptable+0x54/0x130
Apr  6 17:34:05 avlnxperf kernel: do_filp_open+0x91/0x100
Apr  6 17:34:05 avlnxperf kernel: ? __alloc_fd+0x46/0x170
Apr  6 17:34:05 avlnxperf kernel: do_sys_open+0x124/0x210
Apr  6 17:34:05 avlnxperf kernel: ? __audit_syscall_exit+0x209/0x290
Apr  6 17:34:05 avlnxperf kernel: SyS_open+0x1e/0x20
Apr  6 17:34:05 avlnxperf kernel: do_syscall_64+0x67/0x180
Apr  6 17:34:05 avlnxperf kernel: entry_SYSCALL64_slow_path+0x25/0x25
Apr  6 17:34:05 avlnxperf kernel: RIP: 0033:0x7faef86b0a10
Apr  6 17:34:05 avlnxperf kernel: RSP: 002b:00007fffa7159438 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
Apr  6 17:34:05 avlnxperf kernel: RAX: ffffffffffffffda RBX: 0000000000b34310 RCX: 00007faef86b0a10
Apr  6 17:34:05 avlnxperf kernel: RDX: 00007fffa7159598 RSI: 0000000000080000 RDI: 00007fffa7159590
Apr  6 17:34:05 avlnxperf kernel: RBP: 00007fffa7159590 R08: 00007faef8610938 R09: 0000000000000008
Apr  6 17:34:05 avlnxperf kernel: R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
Apr  6 17:34:05 avlnxperf kernel: R13: 0000000000b34550 R14: 0000000000000005 R15: 0000000000000000
#5 lore raw

PATCH 2/2 scsi: Add template flag 'host_tagset'

In reply to Hannes Reinecke

Add a host template flag 'host_tagset' to enable the use of a global tagmap for block-mq.

---
 drivers/scsi/scsi_lib.c  | 2 ++
 include/scsi/scsi_host.h | 5 +++++
 2 files changed, 7 insertions(+)
drivers/scsi/scsi_lib.c +2 -0
index ba22866..00036cb 100644
@@ -2193,6 +2193,8 @@ int scsi_mq_setup_tags(struct Scsi_Host *shost)
 	shost->tag_set.cmd_size = cmd_size;
 	shost->tag_set.numa_node = NUMA_NO_NODE;
 	shost->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
+	if (shost->hostt->host_tagset)
+		shost->tag_set.flags |= BLK_MQ_F_GLOBAL_TAGS;
 	shost->tag_set.flags |=
 		BLK_ALLOC_POLICY_TO_MQ_FLAG(shost->hostt->tag_alloc_policy);
 	shost->tag_set.driver_data = shost;
include/scsi/scsi_host.h +5 -0
index 3cd8c3b..dff3ec1 100644
@@ -457,6 +457,11 @@ struct scsi_host_template {
 	unsigned no_async_abort:1;
 
 	/*
+	 * True if the host supports a host-wide tagspace
+	 */
+	unsigned host_tagset:1;
+
+	/*
 	 * Countdown for host blocking with no commands outstanding.
 	 */
 	unsigned int max_host_blocked;
Signature · 1 line
1.8.5.6
#6 lore raw
In reply to Hannes Reinecke
Quoted 9 lines · Hannes Reinecke

Hi all,

as discussed recently most existing HBAs have a host-wide tagset which does not map easily onto the per-queue tagset model of block mq. This patchset implements a flag BLK_MQ_F_GLOBAL_TAGS for block-mq, which enables the use of a shared tagset for all hardware queues. The second patch adds a flag 'host_tagset' to the SCSI host template, which allows drivers to enable the use of the global tagset.

Quoted 7 lines

This patchset probably has some performance implications as there is a quite high probability of cache-bouncing when allocating tags. Also I'm not quite sure if the implemented tagset sharing is the correct way to handle things.
So this can be considered an RFC.

As usual, comments and reviews are welcome.

Hi, Hannes,

blk-mq already supports a shared tagset, and scsi-mq already uses that. When we initialize a request queue, we add it to a tagset with blk_mq_add_queue_set(), where we automatically mark the tagset as shared if there is more than one queue using it. What does this do that BLK_MQ_F_TAG_SHARED doesn't cover?

#7 lore raw
Quoted 5 lines · Omar Sandoval

blk-mq already supports a shared tagset, and scsi-mq already uses that. When we initialize a request queue, we add it to a tagset with blk_mq_add_queue_set(), where we automatically mark the tagset as shared if there is more than one queue using it. What does this do that BLK_MQ_F_TAG_SHARED doesn't cover?

Hello Omar,

Today blk-mq creates one tag set per hardware queue. The sharing by scsi-mq is between request queues for hardware queues that have the same index but not between hardware queues of a single request queue. My understanding is that the goal of this patch series is to make it possible to use a single tag set for all hardware queues and all request queues that share the same SCSI host.

Bart.=

#8 lore raw
In reply to Omar Sandoval
Quoted 18 lines · Omar Sandoval
Quoted 9 lines · Hannes Reinecke

Hi all,

as discussed recently most existing HBAs have a host-wide tagset which does not map easily onto the per-queue tagset model of block mq. This patchset implements a flag BLK_MQ_F_GLOBAL_TAGS for block-mq, which enables the use of a shared tagset for all hardware queues. The second patch adds a flag 'host_tagset' to the SCSI host template, which allows drivers to enable the use of the global tagset.

Quoted 7 lines

This patchset probably has some performance implications as there is a quite high probability of cache-bouncing when allocating tags. Also I'm not quite sure if the implemented tagset sharing is the correct way to handle things.
So this can be considered an RFC.

As usual, comments and reviews are welcome.

Quoted 8 lines

Hi, Hannes,

blk-mq already supports a shared tagset, and scsi-mq already uses that. When we initialize a request queue, we add it to a tagset with blk_mq_add_queue_set(), where we automatically mark the tagset as shared if there is more than one queue using it. What does this do that BLK_MQ_F_TAG_SHARED doesn't cover?

This is orthogonal to the BLK_MQ_F_TAG_SHARED flag.
That flag is covering the case for several block devices sharing the same tagset. My new flag is covering the case where several _hardware_ queues are sharing the same tagset.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N�rnberg
GF: J. Hawn, J. Guild, F. Imend�rffer, HRB 16746 (AG N�rnberg)
#9 lore raw
In reply to Hannes Reinecke
Quoted 9 lines · Hannes Reinecke

Hi all,

as discussed recently most existing HBAs have a host-wide tagset which does not map easily onto the per-queue tagset model of block mq. This patchset implements a flag BLK_MQ_F_GLOBAL_TAGS for block-mq, which enables the use of a shared tagset for all hardware queues. The second patch adds a flag 'host_tagset' to the SCSI host template, which allows drivers to enable the use of the global tagset.

Quoted 7 lines

This patchset probably has some performance implications as there is a quite high probability of cache-bouncing when allocating tags. Also I'm not quite sure if the implemented tagset sharing is the correct way to handle things.
So this can be considered an RFC.

As usual, comments and reviews are welcome.

Just be curious, why is multi hard queue used for this case? Are there some real cases in SCSI?

Thanks,
Ming Lei

#10 lore raw

On 04/04/2017 09:00 AM, Ming Lei wrote:=0A=

Quoted 2 lines

Just be curious, why is multi hard queue used for this case? Are there=0A= some real cases in SCSI?=0A=

=0A=
Hello Ming,=0A=
=0A=
Yes, there is a real need for this. Background information is available=0A= in the following e-mail thread: Arun Easi, "scsi-mq - tag# and=0A= can_queue, performance", April 2, 2017, linux-scsi=0A=
(http://www.spinics.net/lists/linux-scsi/msg106853.html).=0A=
=0A=
Bart.=0A=

#11 lore raw
In reply to Ming Lei
Quoted 16 lines · Ming Lei
Quoted 15 lines · Hannes Reinecke

Hi all,

as discussed recently most existing HBAs have a host-wide tagset which does not map easily onto the per-queue tagset model of block mq. This patchset implements a flag BLK_MQ_F_GLOBAL_TAGS for block-mq, which enables the use of a shared tagset for all hardware queues. The second patch adds a flag 'host_tagset' to the SCSI host template, which allows drivers to enable the use of the global tagset.

This patchset probably has some performance implications as there is a quite high probability of cache-bouncing when allocating tags. Also I'm not quite sure if the implemented tagset sharing is the correct way to handle things.
So this can be considered an RFC.

Quoted 5 lines
Quoted 1 line

As usual, comments and reviews are welcome.

Just be curious, why is multi hard queue used for this case? Are there some real cases in SCSI?

Yes.
This is required by basically every driver in drivers/scsi which would in theory be able to support scsi-mq (ie lpfc, qla2xxx, mpt3sas, and possibly fnic). Each of them support several submission/completion queues, but every one of them has a host-wide tag map, too.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)