DVB-C no EPG data with kernel v5.0-rc
Hello,
I have a
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb [14f1:8880] (rev 04)
Subsystem: Hauppauge computer works Inc. Device [0070:c138] Kernel driver in use: cx23885
on linux 5.0.0-rc8.
In dmesg I see lines like this:
[ 17.925917] tda10071 7-0005: found a 'NXP TDA10071' in cold state, will try to load a firmware [ 17.925920] tda10071 7-0005: downloading firmware from file 'dvb-fe-tda10071.fw' [ 22.722865] tda10071 7-0005: firmware version 1.21.31.2 [ 22.722867] tda10071 7-0005: found a 'NXP TDA10071' in warm state [ 22.762084] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000 [ 22.817566] si2165 7-0064: downloading firmware from file 'dvb-demod-si2165.fw' size=5768 [ 22.820633] si2165 7-0064: si2165_upload_firmware: extracted patch_version=0x9a, block_count=0x27, crc_expected=0xcc0a [ 23.906627] si2165 7-0064: fw load finished [ 23.911549] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 77.351619] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 98.609998] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 119.615057] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 140.620080] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 161.645094] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0
...
The last line is repeated regularly.
I have noticed that vdr doesn't save something in epg.data, when I deleted the file and reboot, no new data is saved until I boot kernel 4.20 or older.
But: As far as I know I don't miss any channels.
Do you have any idea what the problem might be?
I could bisect if you want.
Thank you,
Thomas
Quoted 28 lines · Thomas Voegtle
Hello,
I have a
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb [14f1:8880] (rev 04)
Subsystem: Hauppauge computer works Inc. Device [0070:c138] Kernel driver in use: cx23885on linux 5.0.0-rc8.
In dmesg I see lines like this:
[ 17.925917] tda10071 7-0005: found a 'NXP TDA10071' in cold state, will try to load a firmware [ 17.925920] tda10071 7-0005: downloading firmware from file 'dvb-fe-tda10071.fw' [ 22.722865] tda10071 7-0005: firmware version 1.21.31.2 [ 22.722867] tda10071 7-0005: found a 'NXP TDA10071' in warm state [ 22.762084] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000 [ 22.817566] si2165 7-0064: downloading firmware from file 'dvb-demod-si2165.fw' size=5768 [ 22.820633] si2165 7-0064: si2165_upload_firmware: extracted patch_version=0x9a, block_count=0x27, crc_expected=0xcc0a [ 23.906627] si2165 7-0064: fw load finished [ 23.911549] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 77.351619] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 98.609998] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 119.615057] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 140.620080] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0 [ 161.645094] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...864000000, frontend: 0...0
Quoted 4 lines
...
The last line is repeated regularly.
I have noticed that vdr doesn't save something in epg.data, when I deleted the file and reboot, no new data is saved until I boot kernel 4.20 or older.
I got into that a bit more and I have to say that I'm wrong about that EPG data. I can't really see a pattern, it feels like receiveing EPG data takes much longer with 5.0-rc as older kernel do, but I just can be wrong.
But then... for what is that debug message repeated regularly? Is there something wrong or not?
Thanks,
Thomas