Skip to contentSkip to conversation

spi: Document Octal mode as valid SPI bus width

PATCH In review Vignesh Raghavendra 2 participants 2 messages Jan 2, 2020 – Jan 3, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: Document Octal mode as valid SPI bus width

SPI core supports Octal SPI controllers which have 8 IO lines. Therefore document 8 as a valid option for spi-tx{rx}-bus-width

---
 Documentation/devicetree/bindings/spi/spi-controller.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/spi/spi-controller.yaml +2 -2
index 732339275848..1e0ca6ccf64b 100644
@@ -111,7 +111,7 @@ patternProperties:
       spi-rx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MISO.
@@ -123,7 +123,7 @@ patternProperties:
       spi-tx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MOSI.
Signature · 1 line
2.24.1
maintainer
#1 lore raw

Applied "spi: Document Octal mode as valid SPI bus width" to the spi tree

The patch

spi: Document Octal mode as valid SPI bus width

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 09b6636cea4f8e419d7cca4155e8695e462535a6 Mon Sep 17 00:00:00 2001

From: Vignesh Raghavendra <[email protected]>
Date: Thu, 2 Jan 2020 15:51:18 +0530
Subject: [PATCH] spi: Document Octal mode as valid SPI bus width

SPI core supports Octal SPI controllers which have 8 IO lines. Therefore document 8 as a valid option for spi-tx{rx}-bus-width

---
 Documentation/devicetree/bindings/spi/spi-controller.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/spi/spi-controller.yaml +2 -2
index 732339275848..1e0ca6ccf64b 100644
@@ -111,7 +111,7 @@ patternProperties:
       spi-rx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MISO.
@@ -123,7 +123,7 @@ patternProperties:
       spi-tx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MOSI.
Signature · 1 line
2.20.1