Skip to contentSkip to conversation

regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits

PATCH In review Axel Lin 2 participants 2 messages Jan 8, 2020 – Jan 13, 2020

Subsystems (2)
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits

Nowdays ROHM_CHIP_TYPE_AMOUNT includes not only BD71837/BD71847 but also BD70528/BD71828 which are not supported by this driver. So it seems not necessay to have pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] as mapping table. Simplify the code by removing struct bd718xx_pmic_inits and pmic_regulators[ROHM_CHIP_TYPE_AMOUNT].

---
 drivers/regulator/bd718x7-regulator.c | 34 +++++++++++----------------
 1 file changed, 14 insertions(+), 20 deletions(-)
drivers/regulator/bd718x7-regulator.c +14 -20
index 13a43eee2e46..8f9b2d8eaf10 100644
@@ -1142,28 +1142,14 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 	},
 };
 
-struct bd718xx_pmic_inits {
-	const struct bd718xx_regulator_data *r_datas;
-	unsigned int r_amount;
-};
-
 static int bd718xx_probe(struct platform_device *pdev)
 {
 	struct bd718xx *mfd;
 	struct regulator_config config = { 0 };
-	struct bd718xx_pmic_inits pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] = {
-		[ROHM_CHIP_TYPE_BD71837] = {
-			.r_datas = bd71837_regulators,
-			.r_amount = ARRAY_SIZE(bd71837_regulators),
-		},
-		[ROHM_CHIP_TYPE_BD71847] = {
-			.r_datas = bd71847_regulators,
-			.r_amount = ARRAY_SIZE(bd71847_regulators),
-		},
-	};
-
 	int i, j, err;
 	bool use_snvs;
+	const struct bd718xx_regulator_data *reg_data;
+	unsigned int num_reg_data;
 
 	mfd = dev_get_drvdata(pdev->dev.parent);
 	if (!mfd) {
@@ -1172,8 +1158,16 @@ static int bd718xx_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	if (mfd->chip.chip_type >= ROHM_CHIP_TYPE_AMOUNT ||
-	    !pmic_regulators[mfd->chip.chip_type].r_datas) {
+	switch (mfd->chip.chip_type) {
+	case ROHM_CHIP_TYPE_BD71837:
+		reg_data = bd71837_regulators;
+		num_reg_data = ARRAY_SIZE(bd71837_regulators);
+		break;
+	case ROHM_CHIP_TYPE_BD71847:
+		reg_data = bd71847_regulators;
+		num_reg_data = ARRAY_SIZE(bd71847_regulators);
+		break;
+	default:
 		dev_err(&pdev->dev, "Unsupported chip type\n");
 		err = -EINVAL;
 		goto err;
@@ -1215,13 +1209,13 @@ static int bd718xx_probe(struct platform_device *pdev)
 		}
 	}
 
-	for (i = 0; i < pmic_regulators[mfd->chip.chip_type].r_amount; i++) {
+	for (i = 0; i < num_reg_data; i++) {
 
 		const struct regulator_desc *desc;
 		struct regulator_dev *rdev;
 		const struct bd718xx_regulator_data *r;
 
-		r = &pmic_regulators[mfd->chip.chip_type].r_datas[i];
+		r = &reg_data[i];
 		desc = &r->desc;
 
 		config.dev = pdev->dev.parent;
Signature · 1 line
2.20.1
maintainer
#1 lore raw

Applied "regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits" to the regulator tree

The patch

regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.6

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From b389ceae4a8fa4c91dd3543516cdfd49ece7e4ba Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Wed, 8 Jan 2020 09:42:55 +0800
Subject: [PATCH] regulator: bd718x7: Simplify the code by removing struct
bd718xx_pmic_inits

Nowdays ROHM_CHIP_TYPE_AMOUNT includes not only BD71837/BD71847 but also BD70528/BD71828 which are not supported by this driver. So it seems not necessay to have pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] as mapping table. Simplify the code by removing struct bd718xx_pmic_inits and pmic_regulators[ROHM_CHIP_TYPE_AMOUNT].

---
 drivers/regulator/bd718x7-regulator.c | 34 +++++++++++----------------
 1 file changed, 14 insertions(+), 20 deletions(-)
drivers/regulator/bd718x7-regulator.c +14 -20
index 13a43eee2e46..8f9b2d8eaf10 100644
@@ -1142,28 +1142,14 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 	},
 };
 
-struct bd718xx_pmic_inits {
-	const struct bd718xx_regulator_data *r_datas;
-	unsigned int r_amount;
-};
-
 static int bd718xx_probe(struct platform_device *pdev)
 {
 	struct bd718xx *mfd;
 	struct regulator_config config = { 0 };
-	struct bd718xx_pmic_inits pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] = {
-		[ROHM_CHIP_TYPE_BD71837] = {
-			.r_datas = bd71837_regulators,
-			.r_amount = ARRAY_SIZE(bd71837_regulators),
-		},
-		[ROHM_CHIP_TYPE_BD71847] = {
-			.r_datas = bd71847_regulators,
-			.r_amount = ARRAY_SIZE(bd71847_regulators),
-		},
-	};
-
 	int i, j, err;
 	bool use_snvs;
+	const struct bd718xx_regulator_data *reg_data;
+	unsigned int num_reg_data;
 
 	mfd = dev_get_drvdata(pdev->dev.parent);
 	if (!mfd) {
@@ -1172,8 +1158,16 @@ static int bd718xx_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	if (mfd->chip.chip_type >= ROHM_CHIP_TYPE_AMOUNT ||
-	    !pmic_regulators[mfd->chip.chip_type].r_datas) {
+	switch (mfd->chip.chip_type) {
+	case ROHM_CHIP_TYPE_BD71837:
+		reg_data = bd71837_regulators;
+		num_reg_data = ARRAY_SIZE(bd71837_regulators);
+		break;
+	case ROHM_CHIP_TYPE_BD71847:
+		reg_data = bd71847_regulators;
+		num_reg_data = ARRAY_SIZE(bd71847_regulators);
+		break;
+	default:
 		dev_err(&pdev->dev, "Unsupported chip type\n");
 		err = -EINVAL;
 		goto err;
@@ -1215,13 +1209,13 @@ static int bd718xx_probe(struct platform_device *pdev)
 		}
 	}
 
-	for (i = 0; i < pmic_regulators[mfd->chip.chip_type].r_amount; i++) {
+	for (i = 0; i < num_reg_data; i++) {
 
 		const struct regulator_desc *desc;
 		struct regulator_dev *rdev;
 		const struct bd718xx_regulator_data *r;
 
-		r = &pmic_regulators[mfd->chip.chip_type].r_datas[i];
+		r = &reg_data[i];
 		desc = &r->desc;
 
 		config.dev = pdev->dev.parent;
Signature · 1 line
2.20.1