Skip to contentSkip to conversation

ASoC: rt1015: add rt1015 amplifier driver

PATCH In review [email protected] 2 participants 2 messages Jan 15, 2020 – Jan 23, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ASoC: rt1015: add rt1015 amplifier driver

From: Jack Yu <[email protected]>

This is initial amplifier driver for rt1015.

---
 .../devicetree/bindings/sound/rt1015.txt      |  17 +
 sound/soc/codecs/Kconfig                      |   6 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/rt1015.c                     | 993 ++++++++++++++++++
 sound/soc/codecs/rt1015.h                     | 375 +++++++
 5 files changed, 1393 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/rt1015.txt
 create mode 100644 sound/soc/codecs/rt1015.c
 create mode 100644 sound/soc/codecs/rt1015.h
Documentation/devicetree/bindings/sound/rt1015.txt new file +17 -0
new file mode 100644
index 000000000000..fcfd02d8d32f
@@ -0,0 +1,17 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1015: codec@28 {
+	compatible = "realtek,rt1015";
+	reg = <0x28>;
+};
sound/soc/codecs/Kconfig +6 -0
index de3f13dafc3c..797f198bcfa3 100644
@@ -150,6 +150,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_RT286 if I2C
 	select SND_SOC_RT298 if I2C
 	select SND_SOC_RT1011 if I2C
+	select SND_SOC_RT1015 if I2C
 	select SND_SOC_RT1305 if I2C
 	select SND_SOC_RT1308 if I2C
 	select SND_SOC_RT5514 if I2C
@@ -969,6 +970,7 @@ config SND_SOC_RL6231
 	default y if SND_SOC_RT5677=y
 	default y if SND_SOC_RT5682=y
 	default y if SND_SOC_RT1011=y
+	default y if SND_SOC_RT1015=y
 	default y if SND_SOC_RT1305=y
 	default y if SND_SOC_RT1308=y
 	default m if SND_SOC_RT5514=m
@@ -985,6 +987,7 @@ config SND_SOC_RL6231
 	default m if SND_SOC_RT5677=m
 	default m if SND_SOC_RT5682=m
 	default m if SND_SOC_RT1011=m
+	default m if SND_SOC_RT1015=m
 	default m if SND_SOC_RT1305=m
 	default m if SND_SOC_RT1308=m
 
@@ -1012,6 +1015,9 @@ config SND_SOC_RT298
 config SND_SOC_RT1011
 	tristate
 
+config SND_SOC_RT1015
+	tristate
+
 config SND_SOC_RT1305
 	tristate
 
sound/soc/codecs/Makefile +2 -0
index 751f2b4d095b..1f9b1301df5a 100644
@@ -153,6 +153,7 @@ snd-soc-rk3328-objs := rk3328_codec.o
 snd-soc-rl6231-objs := rl6231.o
 snd-soc-rl6347a-objs := rl6347a.o
 snd-soc-rt1011-objs := rt1011.o
+snd-soc-rt1015-objs := rt1015.o
 snd-soc-rt1305-objs := rt1305.o
 snd-soc-rt1308-objs := rt1308.o
 snd-soc-rt1308-sdw-objs := rt1308-sdw.o
@@ -449,6 +450,7 @@ obj-$(CONFIG_SND_SOC_RK3328)	+= snd-soc-rk3328.o
 obj-$(CONFIG_SND_SOC_RL6231)	+= snd-soc-rl6231.o
 obj-$(CONFIG_SND_SOC_RL6347A)	+= snd-soc-rl6347a.o
 obj-$(CONFIG_SND_SOC_RT1011)	+= snd-soc-rt1011.o
+obj-$(CONFIG_SND_SOC_RT1015)	+= snd-soc-rt1015.o
 obj-$(CONFIG_SND_SOC_RT1305)	+= snd-soc-rt1305.o
 obj-$(CONFIG_SND_SOC_RT1308)	+= snd-soc-rt1308.o
 obj-$(CONFIG_SND_SOC_RT1308_SDW)	+= snd-soc-rt1308-sdw.o
sound/soc/codecs/rt1015.c new file +993 -0

993 lines not on this page · raw message

sound/soc/codecs/rt1015.h new file +375 -0

375 lines not on this page · raw message

Signature · 6 lines
2.24.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
maintainer
#1 lore raw

[alsa-devel] Applied "ASoC: rt1015: add rt1015 amplifier driver" to the asoc tree

The patch

ASoC: rt1015: add rt1015 amplifier driver

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.6

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From df31007400c3905ec15b1065241baf3864decbfa Mon Sep 17 00:00:00 2001
From: Jack Yu <[email protected]>
Date: Wed, 15 Jan 2020 19:25:19 +0800
Subject: [PATCH] ASoC: rt1015: add rt1015 amplifier driver

This is initial amplifier driver for rt1015.

---
 .../devicetree/bindings/sound/rt1015.txt      |  17 +
 sound/soc/codecs/Kconfig                      |   6 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/rt1015.c                     | 993 ++++++++++++++++++
 sound/soc/codecs/rt1015.h                     | 375 +++++++
 5 files changed, 1393 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/rt1015.txt
 create mode 100644 sound/soc/codecs/rt1015.c
 create mode 100644 sound/soc/codecs/rt1015.h
Documentation/devicetree/bindings/sound/rt1015.txt new file +17 -0
new file mode 100644
index 000000000000..fcfd02d8d32f
@@ -0,0 +1,17 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1015: codec@28 {
+	compatible = "realtek,rt1015";
+	reg = <0x28>;
+};
sound/soc/codecs/Kconfig +6 -0
index 52c51a9c5505..c9eb683bd1b0 100644
@@ -151,6 +151,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_RT286 if I2C
 	select SND_SOC_RT298 if I2C
 	select SND_SOC_RT1011 if I2C
+	select SND_SOC_RT1015 if I2C
 	select SND_SOC_RT1305 if I2C
 	select SND_SOC_RT1308 if I2C
 	select SND_SOC_RT5514 if I2C
@@ -970,6 +971,7 @@ config SND_SOC_RL6231
 	default y if SND_SOC_RT5677=y
 	default y if SND_SOC_RT5682=y
 	default y if SND_SOC_RT1011=y
+	default y if SND_SOC_RT1015=y
 	default y if SND_SOC_RT1305=y
 	default y if SND_SOC_RT1308=y
 	default m if SND_SOC_RT5514=m
@@ -986,6 +988,7 @@ config SND_SOC_RL6231
 	default m if SND_SOC_RT5677=m
 	default m if SND_SOC_RT5682=m
 	default m if SND_SOC_RT1011=m
+	default m if SND_SOC_RT1015=m
 	default m if SND_SOC_RT1305=m
 	default m if SND_SOC_RT1308=m
 
@@ -1013,6 +1016,9 @@ config SND_SOC_RT298
 config SND_SOC_RT1011
 	tristate
 
+config SND_SOC_RT1015
+	tristate
+
 config SND_SOC_RT1305
 	tristate
 
sound/soc/codecs/Makefile +2 -0
index 7bd87a6371cf..ba1b4b3fa2da 100644
@@ -154,6 +154,7 @@ snd-soc-rk3328-objs := rk3328_codec.o
 snd-soc-rl6231-objs := rl6231.o
 snd-soc-rl6347a-objs := rl6347a.o
 snd-soc-rt1011-objs := rt1011.o
+snd-soc-rt1015-objs := rt1015.o
 snd-soc-rt1305-objs := rt1305.o
 snd-soc-rt1308-objs := rt1308.o
 snd-soc-rt1308-sdw-objs := rt1308-sdw.o
@@ -451,6 +452,7 @@ obj-$(CONFIG_SND_SOC_RK3328)	+= snd-soc-rk3328.o
 obj-$(CONFIG_SND_SOC_RL6231)	+= snd-soc-rl6231.o
 obj-$(CONFIG_SND_SOC_RL6347A)	+= snd-soc-rl6347a.o
 obj-$(CONFIG_SND_SOC_RT1011)	+= snd-soc-rt1011.o
+obj-$(CONFIG_SND_SOC_RT1015)	+= snd-soc-rt1015.o
 obj-$(CONFIG_SND_SOC_RT1305)	+= snd-soc-rt1305.o
 obj-$(CONFIG_SND_SOC_RT1308)	+= snd-soc-rt1308.o
 obj-$(CONFIG_SND_SOC_RT1308_SDW)	+= snd-soc-rt1308-sdw.o
sound/soc/codecs/rt1015.c new file +993 -0

993 lines not on this page · raw message

sound/soc/codecs/rt1015.h new file +375 -0

375 lines not on this page · raw message

Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel