dt-bindings: sound: cs42l51: Remove unneeded I2C unit name

The following warning is seen with 'make dt_binding_check':

Documentation/devicetree/bindings/sound/cirrus,cs42l51.example.dts:18.15-34.11: Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property

Fix it by removing the unneeded i2c unit name.

---
 Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index efce847a3408..83f44f07ac3f 100644
@@ -49,7 +49,7 @@ required:
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    i2c@0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 

2.17.1

Thanks!

The patch

dt-bindings: sound: cs42l51: Remove unneeded I2C unit name

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From f3ca3f5b0966cfc2737178cca8a7a65b09991898 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Fri, 27 Mar 2020 12:57:21 -0300
Subject: [PATCH] dt-bindings: sound: cs42l51: Remove unneeded I2C unit name

The following warning is seen with 'make dt_binding_check':

Documentation/devicetree/bindings/sound/cirrus,cs42l51.example.dts:18.15-34.11: Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property

Fix it by removing the unneeded i2c unit name.

---
 Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index efce847a3408..83f44f07ac3f 100644
@@ -49,7 +49,7 @@ required:
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    i2c@0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 

2.20.1